MINI PROJECT- 2

(2020-21)

Campus Network Design Using

Cisco Packet Tracer

FINAL REPORT

Institute of Engineering & Technology

Submitted by-

Jitendra Singh (181500300)

Vivek Goyal (181500817)

Supervised By: -
Mr. Pankaj Kapoor
Technical Trainer
Department of Computer Engineering & Applications

1
 ACKNOWLEDGEMENT

Date: 20/04/2021

This is to certify that the project work entitled “Campus Network Design” submitted by

Jitendra Singh (181500300) and Vivek Goyal (181500817) in fulfillment for the requirements

of the award of Bachelor of Technology Degree in Computer Science at GLA University

Mathura is an authentic work carried out by them under my supervision and guidance. To the

best of my knowledge, the matter embodied in the project has not been submitted to any other

University / Institute for the award of any Degree.

Mr. Pankaj Kapoor

Project Guide
Department of CSE
GLA University Mathura

2
CERTIFICATE

3
 ABSTRACT

Computer networks have a significant impact on the working of an organization. Universities

depend on the proper functioning and analysis of their networks for education,
administration, communication, e-library, automation, etc. An efficient network is essential
to facilitate the systematic and cost-efficient transfer of information in an organization in the
form of messages, files, and resources. The project provides insights into various concepts
such as topology design, IP address configuration, and how to send information in the form
of packets to the wireless networks of different areas of a University.

The aim of this project is to design the topology of the university network using the software
Cisco Packet Tracer with the implementation of wireless networking systems. This university
network consists of the following devices:

1) Router (1941)
2) Switches (2960-24TT)
3) Email server
4) DNS server
5) WEB server (HTTP)
6) Wireless Device (Access Point)
7) PCs
8) Laptops
9) Smartphones

The design includes the following parts of the University:

• Hostel Blocks: Girls Block and Boys Block

• Academic Blocks: AB1 and AB2
• Dome Building and Library
• IT Consulting

4
______________________Table Of Content__________________________

1. Cover Page 1

2. Acknowledgement & Certificate 2-3

3. Abstract 4

4. Table of Content 5

5. Chapter 1: Introduction 6

6. Chapter 2: Literature Review 7

7. Chapter 3: Work Done 11

8. Chapter 4: Results and Discussion 27

9. Chapter 5: Conclusions and Future Work 34

10. References 35

5
 CHAPTER 1

INTRODUCTION

● Motivation

The word “digital” is very significant in today’s world, with an increase in the development
of technology the entire world is moving towards the digital era. The educational institution
plays an important role in this digitalization, hence the campus should adapt to digital means
of networking as well and become a “digital campus”. Going wireless plays an important role
in this digitalization. The wireless network makes the connection easy with a reduction in the
use of wires or cables. A wired connection makes it difficult to keep track of all the devices
and to manage the cable connection, which is not only chaotic but also challenging to handle.

Campus networking via wireless connection becomes an important part of campus life and
provides the main way for teachers and students to access educational resources, which gives
an important platform to exchange information. As laptops and intelligent terminals are
widely used, demand for access to information anytime and anywhere has become more and
more urgent, but traditional cable networks cannot meet this requirement. Then wireless
network construction becomes necessary and essential. The wireless network is one of the
important components of a digital campus and wisdom campus. It provides an efficient way
to explore the internet with a mobile terminal for teachers and students regardless of cables
and places.

This is an important mark of the modern campus as a supplement of a cable network. With
the development of network and communication technology, cable networks on a university
campus bring much convenience for teaching and research work. But for mobility and
flexibility, it has obvious shortcomings. A wireless network can overcome these drawbacks
and has been applied to the university campus.

6
 ● Project Statement

In this mini-project, we defined a simulation of campus networks based on wireless

networking. The network is divided into two sets: one for the campus area and the other for
the hostel area.

The major aim of this project is to show the wireless connectivity that is used in universities
to make the network efficient and mobile at the same time. Mobility is the major
concentration of this project. In order to provide equal functionality to all the users (college
staff and students), we have added DNS, Email, and HTTP servers for the maximum
utilization of resources.

Hence the campus network provides different services such as connecting the user to the
internet, data sharing among users (students, teachers, and different university members),
accessing different web services for different functionalities, so it needs wireless networking
for smooth processing.

CHAPTER 2

LITERATURE REVIEW

● What is Packet Tracer?

Packet Tracer is a cross-platform visual simulation tool designed by Cisco Systems that
allows users to create network topologies and imitate modern computer networks. The
software allows users to simulate the configuration of Cisco routers and switches using a
simulated command-line interface. Packet Tracer makes use of a drag-and-drop user
interface, allowing users to add and remove simulated network devices as they see fit. The

7
 software is mainly focused on Certified Cisco Network Associate Academy students as an
educational tool for helping them learn fundamental CCNA concepts. Previously students
enrolled in a CCNA Academy program could freely download and use the tool free of charge
for educational use.

● Router

A router is a device like a switch that routes data packets based on their IP addresses. The
router is mainly a Network Layer device. Routers normally connect LANs and WANs
together and have a dynamically updating routing table based on which they make decisions
on routing the data packets. Router divides broadcast domains of hosts connected through it.

● Switch

A network switch (also called switching hub, bridging hub, officially MAC bridge is
networking hardware that connects devices on a computer network by using packet switching
to receive and forward data to the destination device. A network switch is a multiport
network bridge that uses MAC addresses to forward data at the data link layer (layer 2) of the
OSI model. Some switches can also forward data at the network layer (layer 3) by
additionally incorporating routing functionality. Such switches are commonly known as
layer-3 switches or multilayer switches.

● Network Packet

A network packet is a formatted unit of data carried by a packet-switched network. A packet

consists of control information and user data, which is also known as the payload.

● Wireless Network

8
 A wireless network broadcasts an access signal to the workstations or PCs. This enables
mobility among laptops, tablets, and PCs from room to room while maintaining a firm
network connection continuously. A wireless network also presents additional security
requirements.

● Server

A server is a computer or system that provides resources, data, services, or programs to other
computers, known as clients, over a network. In theory, whenever computers share resources
with client machines they are considered servers. There are many types of servers, including
web servers, mail servers, and virtual servers.

Many networks contain one or more of the common servers. The servers used in our project
are as follows:

➢ DNS Server

DNS stands for Domain Name System servers which are application servers that
provide a human-friendly naming method to the user computers in order to make IP
addresses readable by users. The DNS system is a widely distributed database of
names and other DNS servers, each of which can be used to request an otherwise
unknown computer name. When a user needs the address of a system, it sends a DNS
request with the name of the desired resource to a DNS server. The DNS server
responds with the necessary IP address from its table of names.

➢ WEB Server

One of the widely used servers in today’s market is a web server. A web server is a
special kind of application server that hosts programs and data requested by users
across the Internet or an intranet. Web servers respond to requests from browsers
running on client computers for web pages, or other web-based services.

9
 ➢ EMAIL Server

An e-mail server is a server that handles and delivers e-mail over a network, using
standard email protocols. For example, the SMTP protocol sends messages and
handles outgoing mail requests. The POP3 protocol receives messages and is used to
process incoming mail. When you log on to a mail server using a webmail interface or
email client, these protocols handle all the connections behind the scenes.

● Ethernet

This is the backbone of our network. It consists of the cabling and is typically able to
Transfer data at a rate of 100mb/s. It is a system for connecting a number of computer
systems to form a local area network, with protocols to control the passing of information and
to avoid simultaneous transmission by two or more systems. Among the different types of
ethernet, we have used Gigabit Ethernet, which is a type of Ethernet network capable of
transferring data at a rate of 1000 Mbps and fast Ethernet is a type of Ethernet network that
can transfer data at a rate of 100 Mbps.

● Computing Device

Computing devices are the electronic devices that take user inputs, process the inputs, and
then provide us with the end results. These devices may be Smartphones, PC Desktops,
Laptops, printer, and many more.

● Internet Protocol

Internet Protocol (IP) is one of the fundamental protocols that allow the internet to work. IP
addresses are a unique set of numbers on each network and they allow machines to address
each other across a network. It is implemented on the internet layer in the IP/TCP model.

10
● SSH Protocol

Secure Shell enables a user to access a remote device and manage it remotely. However, with
SSH, all data transmitted over a network (including usernames and passwords) is encrypted
and secure from eavesdropping.

SSH is a client-server protocol, with an SSH client and an SSH server. The client
machine (such as a PC) establishes a connection to an SSH server running on a remote device
(such as a router). Once the connection has been established, a network admin can execute
commands on the remote device.

● Simulation Environment

The simulations of our network topology can be easily achieved using cisco packet tracer.
Using a simulation mode, you can see packets flowing from one node to another and can also
click on a packet to see detailed information about the OSI layers of the networking. Packet
Tracer offers a huge platform to combine realistic simulation and visualize them
simultaneously. Cisco Packet Tracer makes learning and teaching significantly easier by
supporting multi-user collaboration and by providing a realistic simulation environment for
experimenting with projects.

CHAPTER 3

WORK DONE

In order to make our project understandable, we have divided the content into steps. They are
as follows:

11
1. Software and hardware requirements

Before heading towards the implementation we need to make sure of the following
requirements.

● A proper workstation (any mid-high range laptop will suffice).

● Packet Tracer by Cisco
● 8 GB RAM.
● Any 10,000+ Average CPU Mark scored processor.
● 16 GB of dedicated hard disk space.
● USB 3.0+ port.

2. Network Requirements

GLA University Mathura outline is considered for this wireless university network.
The network is divided into 2 areas :

1. Campus Area
The Campus area is further divided into various accessing points like Dome
building, Library, Academic Blocks (AB1 and AB2), Server Center, and IT
consulting.

2. Hostel Area
The Hostel area is further divided into Boys blocks and Girls blocks
respectively.

12
 3. Layout

Figure – Basic Layout of our wireless access points in University

Devices Used In The Network

Devices Quantity

1) Router (1941) 3

2) Switches (2960-24TT) 3

3) EMAIL server 1

4) DNS server 1

5) WEB server (HTTP) 1

6) Wireless Device (Access Point) 7

7) PCs 12

8) Laptops 10

9) Smartphones 2

Figure 3: Devices used in the network

13
4. Implementation and Flow Diagram

● To design the wireless network of the university we initially started by placing

the core devices into the frame as mentioned in the layout.

● Firstly, we placed the main router at the center of the university outline,
which was further connected to the server switch using the gigabit ethernet
port with copper straight-through cable and sub routers (campus router and
hostel router) using the serial port with serial DCE cable at the hostel area
and campus area respectively.

● The server switch was further connected to the EMAIL, DNS, and WEB
servers respectively.

● Campus router was connected to the campus switch which was further
connected with wireless access points of the academic block (AB1 and AB2),
dome building, library, and IT consulting.

● The wireless access points were then connected to computing devices (PCs,
laptops, and smartphones).

● Similarly, the hostel router was connected to the hostel switch which was
further connected with the wireless access point of boys block and girls block.

● The wireless access points were then connected to the computing devices
(PCs, laptops, and smartphones), every area has a dedicated access point
which can only be connected with the help of a password.

● All these connections are made through ethernet ports (gigabit ethernet and
fast ethernet) using copper straight-through cables.

14
This is the flow diagram for a better understanding of the steps mentioned above.

15
5. Configuring IP Addresses
We have attached the screenshots of all the IP configuration below:

● Main Router configuration

GigabitEthernet0/1

Serial0/1/0

Serial0/1/1

RIP

16
● DNS SERVER

● WEB SERVER

17
● EMAIL SERVER

● COLLEGE ROUTER

GigabitEthernet0/0

Serial0/1/0

18
● ACADEMIC BLOCK 1

IP Address are as follows

192.168.1.14- Laptop
192.168.1.15- PC
192.168.1.16- Laptop
192.168.1.17- PC
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.1.1
DNS Server- 192.168.2.3

● ACADEMIC BLOCK 2

IP Address are as follows

192.168.1.10- Laptop
192.168.1.11- PC
192.168.1.12- Laptop
192.168.1.13- PC
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.1.1
DNS Server- 192.168.2.3

19
● DOME BUILDING

IP Addresses are as follows

192.168.1.2- PC
192.168.1.3- PC
192.168.1.4- Laptop
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.1.1
DNS Server- 192.168.2.3

● LIBRARY

IP Addresses are as follows

192.168.1.5- PC
192.168.1.6- PC
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.1.1
DNS Server- 192.168.2.3

20
● IT Consulting

IP Addresses are as follows

192.168.1.7- Laptop
192.168.1.8- PC
192.168.1.9- PC
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.1.1
DNS Server- 192.168.2.3

● HOSTEL ROUTER

GigabitEthernet0/0

Serial0/1/0

21
● Boys Block

IP Addresses are as follows

192.168.3.6- PC
192.168.3.7-Laptop
192.168.3.8- PC
192.168.3.9- Smartphone
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.3.1
DNS Server- 192.168.2.3

● Girls Block

IP Addresses are as follows

192.168.3.2- PC
192.168.3.3-Laptop
192.168.3.4- PC
192.168.3.5- Smartphone
Subnet Mask- 255.255.255.0
Default Gateway- 192.168.3.1
DNS Server- 192.168.2.3

22
● WIRELESS ACCESS POINT

SSID Password

1)muj_dome 1234567890

2)muj_library 1234567890

3)muj_ITC 1234567890

4)muj_AB1 1234567890

5)muj_AB2 1234567890

6)muj_boys 1234567890

7)muj_girls 1234567890

23
6. Securing the network

Passwords are used in accessing the router and all the wireless networks (mentioned
in step 5 wireless access point) to make the access limited to University authorized
users only.

Routers are also secured with ssh (Secure Shell). Routers and their assigned
passwords are mentioned below:

Router Name Passwords

1)main_router Console password: cisco

ssh password: admin

2)Router1(College Router) Console password:muj@123

ssh password: admin

3)Router2(Hostel Router) Console password:muj@123

ssh password: admin

24
25
Connectivity of wireless network on computing devices

26
 CHAPTER 4

RESULT & DISCUSSION

Finally, we have combined all the steps as mentioned in chapter 3 (work done) and
implemented the desired wireless network for University. We have the complete
network providing various facilities to the teaching staff, non-teaching staff, and
students.

The complete diagram of the University Area Network Scenario created in Packet
Tracer environment

27
● Final Simulation

In Simulation Mode, you can watch your network run at a slower pace, observing the paths
that packets take and inspecting them in detail. The proposed architecture, when simulated on
Cisco Packet Tracer, produced results which are demonstrated as follows:

Final simulation for the network system to check all the connections

28
● Ping Test: Network connectivity and communication can be tested using the ping
command, followed by the domain name or the IP address of the device (equipment) whose
connectivity one wishes to verify.

29
SCREENSHOTS –

Logical View

30
Physical View -

31
Racks –

32
Basic Layout –

Final Network Design –

33
 CHAPTER 5

CONCLUSION AND FUTURE WORK

● Conclusion

We started our discussion with the word “digitalization” and in order to achieve it, we
aimed to start with an educational institute, and finally, we designed a network for a
University, which is wireless. As we mentioned, mobility and efficiency are the key
aspects of wireless networks, which were our main goal, and hence, we decided to
shift to a wireless network instead of a wired one, making our network clean and less
chaotic.

In this project, we designed a University Network using Cisco Packet Tracer

that uses a networking topology implemented using servers, routers, switches, and end
devices in a multiple area networks. We have covered all the necessary features that
are required for a network to function properly. We have included a DNS server and a
web server for establishing a smooth communication system between different areas
of our network and specifically for the communication between students and teachers.
We have included an email server to facilitate intra university communication through
emails within the domain. We have used console passwords and ssh protocol to ensure
a safe and secure transfer of data.

● Future Work

The configuration and specifications are for the initial prototype and can further be developed
and additional functionality can be added to increase support and coverage of our existing
network.

34
REFERENCES

[1]https://en.wikipedia.org/wiki/Packet_Tracer

[2]https://www.paessler.com/it-explained/server

[3]https://computernetworking747640215.wordpress.com/2018/07/05/secure-shell-ssh-
configuration-on-a-switch-and-router-in-packet-tracer/

[4]http://router.over-blog.com/article-how-to-configure-cisco-router-password-
106850439.html

[5]https://www.cognoscape.com/benefits-going-wireless/

GIT HUB LINK –

https://github.com/jet0499/Campus-Network-Design#campus-network-design

35