Scribd
Upload
116 views

Classless Inter-Domain Routing (CIDR) (192.168.100.0/29)

Classless Inter-Domain Routing (CIDR) allows more flexible allocation of IP addresses than the original system of IP address classes by providing a more flexible way to specify network addresses in routers. It lets one routing table entry represent an aggregation of networks, reducing wasted IP address space. Using CIDR, each IP address has a network prefix identifying one or several network gateways, with the prefix length varying based on the number of bits needed rather than a class assignment. CIDR was defined in RFC 4632 to address the inflexibility of the class system that resulted in inefficient allocation of IP addresses.

Uploaded by

MCTCOLTD
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
116 views

Classless Inter-Domain Routing (CIDR) (192.168.100.0/29)

Classless Inter-Domain Routing (CIDR) allows more flexible allocation of IP addresses than the original system of IP address classes by providing a more flexible way to specify network addresses in routers. It lets one routing table entry represent an aggregation of networks, reducing wasted IP address space. Using CIDR, each IP address has a network prefix identifying one or several network gateways, with the prefix length varying based on the number of bits needed rather than a class assignment. CIDR was defined in RFC 4632 to address the inflexibility of the class system that resulted in inefficient allocation of IP addresses.

Uploaded by

MCTCOLTD
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Classless Inter-Domain Routing(CIDR)(192.168.100.

0\29)

Classless Inter-Domain Routing (CIDR) is also called sometimes supernetting.


CIDR is a way to allow more flexible allocation of IP addresses than was possible
with the original system of IP address classes. With Classless Inter-Domain
Routing the number of available Internet IP addresses was significantly increased,
which along with use of Network Address Translation (NAT), has extended the
useful life of IPv4 addressing.

IP addresses were assigned in four major address classes, A,B,C and D. Each of
these address classes allocates one portion of the 32bit IP address format to
identify a network gateway. The first 8bits for class A, the first 16bits for class B,
and the first 24bits for class C. The remainder identify the hosts on that network.
Class A – 16 million addresses, Class B – 65535 addresses and 254 addresses in
Class C. The addresses on Class D identify multicast domains.

To understand the issues with the class system, imagine that one of the most
regularly used classes was Class B. An organization that needed more than 254
networked devices would often get a Class B license, even though it would have
less than 65534 hosts. This resulted in most of the block of addresses allocated
going unused. This inflexibility of the class system created IPv4 address pool
exhaustion.

Classless Inter-Domain Routing reduced the issue of wasted IP address space by


providing a more flexible way to specify network addresses in routers. Classless
Inter-Domain Routing lets one routing table entry represent an aggregation of
networks that exist in the forward path that do not need to be specified on that
particular gateway. This is much like how the telephone system uses area codes
to channel calls toward a certain part of the network. This aggregation of networks
in a single IP address is sometimes referred to as a supernet.

Using Classless Inter-Domain Routing, each IP address has a network prefix that
identifies one or several network gateways. The length of the network prefix in IPv4
Classless Inter-Domain Routing is also specified as part of the address and varies
depending on the number of bits needed, rather than any arbitrary class
assignment structure.
A route or destination IP address that describes many possible destinations has a
shorter prefix and is said to be less specific. On the other hand a longer prefix
describes a destination gateway. Routers are required to use the most specific or
longest prefix in the routing table when forwarding packets. Classless Inter-Domain
Routing was originally defined in IETF RFC 4632.

You might also like