For more information call (800) 926-26001

Materials Services
Copper and Brass Sales

Aluminum
Stock Guide.
1 For more information call (800) 926-26002

C
  ontent

4 Introduction 31 Tube & Pipe

4 Introduction to Aluminum 31 Round Tube

5 Aluminum Wrought Alloys 34 Square Tube
5 Non-Heat Treatable 36 Round Pipe
6 Heat Treatable
7 Chemical Compositions
8 Typical Physical Properties

36
9 Typical Mechanical Properties
9 Non-Heat Treatable
10 Heat Treatable Sheet & Coil
11 Comparative Characteristics
11 Non-Heat Treatable 36 Sheet & Coil
12 Heat Treatable

13 Long Products 42 Plate

13 Round Bar 42 Plate

17 Square Bar 45 Cast Tooling Plate
19 Rectangular Bar 46 Mold Materials
27 Hexagon Bar 48 Advanced Aluminum Alloy Mold Products
28 I Beam 49 Comparative Characteristics of Aluminum Plate
29 Angle
30 Channel

New! in this edition of the

Aluminum Stock Guide, CBS Part
Note: The data contained within this brochure has been compiled and developed
Numbers make ordering easier from many sources. While every effort has been made to cross-check and verify this
than ever. information, thyssenkrupp Materials NA, Inc., does not guarantee its accuracy. This
data is not to be used for design or specification purposes.

Copyright © 2017 thyssenkrupp Materials NA, Inc.

3 For more information call (800) 926-26004

a·lu·mi·num
1. Chem. a silver-white metallic
element, light in weight, ductile,
malleable, and not readily corroded
or tarnished.

Aluminum is widely acknowledged as one of the most versatile

materials available today. Due mainly to a unique combination of
characteristics, there is an aluminum alloy to fit almost any
application imaginable.

One of aluminum’s most appealing properties is a high resistance to

corrosion due to the natural oxide film that forms when it is exposed
to air. Some aluminum alloys are stronger than structural steel, yet
all the alloys are light in weight.

Aluminum is nontoxic, which allows it to have direct contact with food

products without harmful effects on the body. Because of this
characteristic, it is widely used to make cooking utensils, and is very
prevalent in equipment for food processing industries.

Aluminum is one of two common metals having an electrical

conductivity high enough for use as electrical conductors. High
thermal conductivity is another feature that promotes widespread
use in cooking utensils and heat exchangers. Another very
important asset of aluminum is the ease with which it can be
fabricated, machined, and joined by almost any method.

While for the majority of applications aluminum needs no protective

coating, it accepts a wide assortment of surface finishes and is an
excellent base for producing painted sheet.

This brochure includes data on both wrought alloy and cast

products. An aluminum product is considered wrought if it has
Complete stocks of aluminum been subjected to mechanical working by rolling, extruding, forging,
and other nonferrous metals or other such processes. Wrought alloys are designated as either
are as close as your phone heat treatable or non-heat treatable.
when you call Copper and
Brass Sales.
5 For more information call (800) 926-26006

Aluminum Wrought Alloys

Non-Heat Treatable Alloys Heat Treatable Alloys
The initial strength of the non-heat treatable group of alloys depends upon the hardening effects of elements such as manganese, The initial strength of the heat treatable group of alloys is heightened by the addition of elements such as copper, zinc, silicon, and
magnesium, silicon, and iron, used singly or in combination. These alloys can be further strengthened only by cold working. Typical uses and magnesium, used singly or in combination. These alloys may be further strengthened by a suitable thermal treatment. Typical uses and
characteristics of these alloys are summarized in the following table: characteristics of these alloys are summarized in the following table:
Alloy Characteristics Uses Alloy Characteristics Uses
1100 Excellent corrosion resistance, high thermal and electrical Chemical equipment, spun hollow ware, decorative parts and 2011 Good machinability, good mechanical properties, excellent free- Screw machine products, tube fittings, pipe
conductivity, excellent workability, readily welded and trim, sheet metal work, cooking utensils, heat exchanger fins cutting properties stems, atomizer and hose parts
brazed 2017 Stronger than 2011, fair workability and corrosion resistance, good Screw machine products, rivets, fasteners,
1350 Developed especially for electrical conductor use Electrical conductors, coil windings, power transmission systems machinability aircraft components
2024 High strength, formability and workability is fair, may be spot Aircraft parts, truck wheels, scientific
3003 General purpose, moderate strength, good workability Cooking utensils, refrigerator panels, chemical equipment, welded instruments, veterinary and orthopedic braces
and weldability, high resistance to corrosion general sheet metal work, eyelet stock, gasoline tanks, heat and equipment
exchangers, storage tanks
2024 ALCLAD Cladding provides superior corrosion resistance, good appearance Aircraft frames and skins, washers, truck bodies,
5005 Moderate to high strength, good welding properties, good Appliances, insulation jacketing, cooking utensils, chemical railroad car roofs and sides
corrosion resistance, forms easily, excellent for anodizing equipment, small boats
6013 This alloy features B-rated machinability along with improved Applications that require improved machinability
since it exhibits less tendency to structural streaking
tensile properties over 6061 alloys
5052 Excellent resistance to salt water corrosion, good Home appliances, chemical drums, truck and bus bodies, small 6020 A lead free alloy with A-rated machinability. High mechanical Screw machine parts
weldability and workability, higher strength than 1100 boats, sheet metal parts, kitchen cabinets, fencing, fan blades, properties, excellent anodizing response, excellent corrosion
or 3003 alloys, good finishing characteristics tank cars and trailers resistance, good brazability and weldability
5086 Good forming properties, excellent corrosion resistance Shipyard plate, tanks, unfired welded pressure vessels, auto 6061 One of the most versatile of heat-treatable alloys, good formability Truck and bus bodies, sailboats, canoes,
in marine environments, excellent weldability, stronger aircraft cryogenics, drilling rigs and high resistance to corrosion, medium strength relative to 2000 transmission towers, chemical equipment, paper
than 5052 or 7000 alloys and textile rolls
6063 High corrosion resistance, medium strength, good natural finish Irrigation pipe, store fronts, architectural trim,
pipe railing, furniture
Temper Designations for the Non-Heat Treatable Alloys 6101 Excellent electrical and thermal conductivity, used for electrical High strength bus conductors
Temper designations for non-heat treatable alloys are indicated by The third digit, when used, indicates a variation of a two-digit temper. conductors
suffixes to the alloy number as follows: It is used when the degree of control of temper or the mechanical
properties or both differ from, but are close to, that (or those) for the 6262 Excellent machinability, good resistance to corrosion, readily Screw machine products, camera parts, fittings,
F As fabricated welded, good finishing characteristics nuts, couplings
two-digit H temper designation to which it is added, or when some
O Annealed
other characteristic is significantly affected. NOTE: The minimum 7050 This alloy retains its strength in thicker sections while maintaining Aircraft applications including fuselage frames
H Strain hardened
ultimate tensile strength of a three-digit H temper must be at least good corrosion resistance and toughness and bulkheads
The letter “H” is always followed by 2 or 3 digits. The first digit as close to that of the corresponding two-digit H temper as it is to
7075 One of the strongest and hardest alloys available, good machin- Aircraft, ordnance, keys, small gears
indicates the particular method used to obtain the temper, as follows: the adjacent two-digit H tempers. Products in the H temper whose
ability, fair corrosion resistance, excellent finishing characteristics
mechanical properties are below H_1 shall be variations of H_1.
H1 Strain hardened only 7075 ALCLAD Provides strength of 7075 with superior corrosion resistance from Aerospace applications requiring maximum
H2 Strain hardened, then partially annealed cladding corrosion resistance, skis
H2 Strain hardened, then stabilized

The temper is indicated by the second digit. For instance: Temper Designations for the Heat Treatable Alloys
HX2 1/4 hard These alloys can be heat treated to produce stable tempers other T42 Solution heat treated from the O or F temper to demonstrate
HX4 1/2 hard than F, O, or H and are designated as follows: response to heat treatment, and naturally aged to a
HX6 3/4 hard substantially stable condition
T3 Solution heat treated, then cold worked
HX8 full hard T62 Solution heat treated from the O or F temper to demonstrate
T351 Solution heat treated, naturally aged, stretcher stress relieved
HX9 extra hard response to heat treatment, and artificially aged
T4 Solution heat treated and naturally aged to a substantially
stable condition T651,
T6 Solution heat treated, then artificially aged T751 Stress relieved by stretching
T9 Solution heat treated, artificially aged, and then cold worked
7 For more information call (800) 926-26008

Chemical Compositions Typical Physical Properties

This table contains the chemical composition limits of wrought aluminum alloys in percent by weight maximum unless shown as a range or The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of
minimum. Except for “aluminum” and “others, ” analysis normally is made for elements for which specific limits are shown. For purposes of manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing
determining conformance to these limits, an observed value or a calculated value obtained from analysis is rounded off to the nearest unit in alloys and tempers and should not be specified as engineering requirements or used for design purposes.
the last right-hand place of figures used in expressing the specified limit, in accordance with ASTM Recommended Practice E29. Average(1) Electrical Conductivity at
Coefficient of Thermal 68°F Percent of International Electrical
Thermal Conductivity Annealed Copper Standard Resistivity
Others(1)
Expansion 68 to Melting Range (2, 3)
at 77°F Btu/Ft/ at 68°F Ohms-
Aluminum Alloy Density Lb/In3 212°F x 10 -6 per °F Approximate °F Temper Ft 2/Hr/°F Equal Volume Equal Weight Cir Mil/Ft
Alloy Silicon Iron Copper Manganese Magnesium Chromium Zinc Titanium Each(2) Total(3) Min.(4)
1100 0.95 Si + Fe  –  0.05 – 0.20 0.05  –   –  0.10  –  0.05(5) 0.15 99.00 Non-Heat Treatable
2011 0.40 0.7 5.0 – 6.0  –  –   –  0.30  –  0.05 (6)
0.15 Remainder 1100 .098 13.1 1190 – 1215 0 128 59 194 18
H18 125 57 187 18
2014 0.50 – 1.2 0.7 3.9 – 5.0 0.40 – 1.2 0.20 – 0.8 0.10 0.25 0.15 0.05 0.15 Remainder
3003 .099 12.9 1190 – 1210 0 112 50 163 21
2017 0.20 – 0.8 0.7 3.5 – 4.5 0.40 – 1.0 0.40 – 0.8 0.10 0.25 0.15 0.05 0.15 Remainder
H12 94 42 137 25
2024 0.50 0.50 3.8 – 4.9 0.30 – 0.9 1.2 – 1.8 0.10 0.25 0.15 0.05 0.15 Remainder
H14 92 41 134 25
3003 0.6 0.7 0.05 – 0.20 1.0 – 1.5  –   –  0.10  –  0.05 0.15 Remainder
H18 89 40 130 26
5005 0.30 0.7 0.20 0.20 0.50 – 1.1 0.10 0.25 –  0.05 0.15 Remainder
5005 .098 13.2 1170 – 1210 All 116 52 172 20
5052 0.25 0.40 0.10 0.10 2.2 – 2.8 0.15 – 0.35 0.10 – 0.05 0.15 Remainder 5052 .097 13.2 1125 – 1200 All 80 35 116 30
5083 0.40 0.40 .10 0.4 – 1.0 4.0 – 4.9 0.05 –0.25 0.25 0.15 0.05 0.15 Remainder 5083 .096 13.2 1095 – 1180 0 81 29 98 36
5086 0.40 0.50 0.10 0.20 – 0.7 3.5 – 4.5 0.05 – 0.25 .025 0.15 0.05 0.15 Remainder 5086 .096 13.2 1085 – 1185 All 73 31 104 33
6013 0.6 – 1.0 0.50 0.6 – 1.1 0.20 – 0.80 0.8 – 1.2 0.10  0.25   0.10 0.05 0.15 Remainder
6020 0.4 – 0.9 0.50 0.3 – 0.9 0.35 0.6 – 1.2 0.15 .20 0.15 0.05 0.15 Remainder Heat Treatable
6061 0.40 – 0.8 0.7 0.15 – 0.40 0.15 0.8 – 1.2 0.04 – 0.35 0.25 0.15 0.05 0.15 Remainder 2011 .102 12.7 1005 – 1190(5) T3 88 39 123 27
6063 0.20 – 0.6 0.35 0.10 0.10 0.45 – 0.9 0.10 0.10 0.10 0.05 0.15 Remainder T8 99 45 142 23
2014 .101 12.8 945 – 1180(4) 0 112 50 159 21
6101 (8)
0.30 – 0.7 0.50 0.10 0.03 0.35 – 0.8 0.03 0.10  –  0.03 (9)
0.10 Remainder
T4 78 34 108 31
6262 0.40 – 0.8 0.7 0.15 – 0.40 0.15 0.8 – 1.2 0.04 – 0.14 0.25 0.15 0.05 (10)
0.15 Remainder
T6 89 40 127 26
7050 0.12 0.15 2.0 – 2.6 0.10 1.9 – 2.6 0.04 5.7 – 6.7 0.06 0.05 (12)
0.15 Remainder
2017 .101 13.1 955 – 1185(4) 0 112 50 159 21
7075 0.40 0.50 1.2 – 2.0 0.30 2.1 – 2.9 0.18 – 0.28 5.1 – 6.1 0.20 0.05 0.15 Remainder T4 76 34 108 31
2024 .100 12.9 935 – 1180(4) 0 112 50 160 21
T3, T4, T361 70 30 96 35
Notes: T6, T81, T861 88 38 122 27
(1) Includes listed elements for which no specific limit is shown. (5) Beryllium 0.0008 maximum for welding electrode and welding rod only.
6013 .098 13.0 T651 95
(2) A .0008 weight percent maximum beryllium is applicable to any alloy to be used as (6) Also contains 0.20 to 0.6 percent each of lead and bismuth.
welding electrode or welding rod. (7) Gallium 0.03 percent maximum; vanadium 0.05 percent maximum. 6020 .098 13.2 T8, T9
(3) The sum of those “others” metallic elements 0.010 percent or more each, (8) Bus conductor. 6061 .098 13.1 1080 – 1205(5) 0 104 47 155 22
expressed to the second decimal before determining the sum. (9) Boron 0.06 percent maximum.
(4) The aluminum content for unalloyed aluminum not made by a refining process is (10) Also contains 0.40 to 0.7 percent each of lead and bismuth. T4 89 40 132 26
the difference between 100.00 percent and the sum of all other metallic elements (11) Also contains 0.10 to 0.16 percent of zirconium. T6 96 43 142 24
present in amounts of 0.010 percent or more each, expressed to the second (12) Also contains 0.08 to 0.15 percent of zirconium.
6063 .097 13.0 1140 – 1210 0 126 58 191 18
decimal before determining the sum.
T1 112 50 165 21
T5 121 55 181 19
T6, T83 116 53 175 20
6101 .097 13.0 1150 – 1210 T6 126 57 188 18
T61 128 59 194 18
T63 126 58 191 18
T64 131 60 198 17
T65 126 58 191 18
7075 .101 13.1 890 – 1175(6) T6 75 33 105 31

Notes:
(1) Coefficient to be multiplied by 10-6. Example: 12.2 x 10-6 = 0.0000122. (5) Eutectic melting can be completely eliminated by homogenization.
(2) Melting ranges shown apply to wrought products of 1/4 inch thickness or greater. (6) Homogenization may raise eutectic melting temperature 20-40 °F but usually does
(3) Based on typical composition of the indicated alloys. not eliminate eutectic melting.
(4) Eutectic melting is not eliminated by homogenization.
9 For more information call (800) 926-260010

Typical Mechanical Properties

The following typical properties are not guaranteed since in most cases they are averages for various sizes, product forms, and methods of
manufacture and may not be exactly representative of any particular product or size. These data are intended only as a basis for comparing Heat Treatable
alloys and tempers and should not be specified as engineering requirements or used for design purposes. The indicated typical mechanical Tensile Strength (ksi) Elongation % in 2 in.
Brinell Hardness Ultimate Fatigue Modulus(2) of
properties for all except 0 temper material are higher than the specified minimum properties. For 0 temper products, typical ultimate and yield 1/16 in. Thick 1/2 in. Diameter 500 kg Load Shearing Endurance(1) Elasticity
values are slightly lower than specified (maximum) values. Alloy and Temper Ultimate Yield Specimen Specimen 10 mm Ball Strength (ksi) Limit (ksi) (ksi x 103)
2011-T3 55 43 – 15 95 32 18 10.2

Non-Heat Treatable 2011-T8

2014-0
59
27
45
14
–
–
12
18
100
45
35
18
18
13
10.2
10.6
2014-T4, T451 62 42 – 20 105 38 20 10.6
Tensile Strength (ksi) Elongation % in 2 in.
Brinell Hardness Ultimate Fatigue Modulus(2) of 2014-T6, T651 70 60 – 13 135 42 18 10.6
1/16 in. Thick 1/2 in. Diameter 500 kg Load Shearing Endurance(1) Elasticity 2017-0 26 10 – 22 45 18 13 10.5

n
Alloy and Temper Ultimate Yield Specimen Specimen 10 mm Ball Strength (ksi) Limit (ksi) (ksi x 103)
2017-T4, T451 62 40 – 22 105 38 18 10.5
1100-0 13 5 35 45 23 9 5 10.0 2024-0 27 11 20 22 47 18 13 10.6

sig

sig
1100-H12 16 15 12 25 28 10 6 10.0 2024-T3 70 50 18 – 120 41 20 10.6
1100-H14 18 17 9 20 32 11 7 10.0 2024-T4, T351 68 47 20 19 120 41 20 10.6
1100-H16 21 20 6 17 38 12 9 10.0 2024-T361(3) 72 57 13 – 130 42 18 10.6
1100-H18 24 22 5 15 44 13 9 10.0 Alclad 2024-0 26 11 20 – – 18 – 10.6
3003-0 16 6 30 40 28 11 7 10.0 Alclad 2024-T3 65 45 18 – – 40 – 10.6
3003-H12 19 18 10 20 35 12 8 10.0 Alclad 2024-T4, T351 64 42 19 – – 40 – 10.6
De

De
3003-H14 22 21 8 16 40 14 9 10.0 Alclad 2024-T361(3) 67 53 11 – – 41 – 10.6
3003-H16 26 25 5 14 47 15 10 10.0 Alclad 2024-T81, T851 65 60 6 – – 40 – 10.6
3003-H18 29 27 4 10 55 16 10 10.0 Alclad 2024-T861(3) 70 66 6 – – 42 – 10.6
5005-0 18 6 25 – 28 11 – 10.0 6013-T4 40 21 20 – – – – –
5005-H12 20 19 10 – – 14 – 10.0 6013-T651 60 50 – – 120 – – 10.1
5005-H14 23 22 6 – – 14 – 10.0 6020-T8(4) 42 39 – 12 – – – –
5005-H16 26 25 5 – – 15 – 10.0
or

or
6020-T9(4) 49 46 – 5 – – – –
5005-H18 29 28 4 – – 16 – 10.0 6061-0 18 8 25 30 30 12 9 10.0
5005-H32 20 17 11 – 36 14 – 10.0 6061-T4, T451 35 21 22 25 65 24 14 10.0
5005-H34 23 20 8 – 41 14 – 10.0 6061-T6, T651 45 40 12 17 95 30 14 10.0
tf

tf
5005-H36 26 24 6 – 46 15 – 10.0 6063-0 13 7 – – 25 10 8 10.0
5005-H38 29 27 5 – 51 16 – 10.0 6063-T1 22 13 20 – 42 14 9 10.0
5052-0 28 13 25 30 47 18 16 10.2 6063-T4 25 13 22 – – – – 10.0
5052-H32 33 28 12 18 60 20 17 10.2 6063-T5 27 21 12 – 60 17 10 10.0
No

No
5052-H34 38 31 10 14 68 21 18 10.2 6063-T6 35 31 12 – 73 22 10 10.0
5052-H36 40 35 8 10 73 23 19 10.2 6063-T83 37 35 9 – 82 22 – 10.0
5052-H38 42 37 7 8 77 24 20 10.2 6063-T831 30 27 10 – 70 18 – 10.0
5086-H32, H116 42 30 12 – – – – 10.3 6063-T832 42 39 12 – 95 27 – 10.0
Notes: 6101-H111 14 11 – – – – – 10.0
(1) Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore 6101-T6 32 28 15 – 71 20 – 10.0
type of machine and specimen.
6262-T9 58 55 – 10 120 35 13 10.0
(2) Average of tension and compression moduli. Compression modulus is about 2%
greater than tension modulus. 7050-T7451 76 68 – 11 – 44 – 10.4
7075-0 33 15 17 16 60 22 – 10.4
7075-T6, T651 83 73 11 11 150 48 23 10.4
Alclad 7075-0 32 14 17 – – 22 – 10.4
Alclad 7075-T6, T651 76 67 11 – – 46 – 10.4

Notes:
(1) Based on 500,000,000 cycles of completely reversed stress using the R.R. Moore (3) Tempers T361 and T861 were formerly designated T36 and T86, respectively.
type of machine and specimen. (4) Up to 2 inches in diameter.
(2) Average of tension and compression moduli. Compression modulus is about 2%
greater than tension modulus.
11 For more information call (800) 926-260012

Comparative Characteristics Heat Treatable

Wrought Alloys
and Tempers
Resistance to Corrosion

General(1)
Stress Corrosion
Cracking(2)
Workability
(Cold)(4) Machinability(4) Brazeabiltiy(5) Gas
Weldability(5)

Arc
Resistance:
Spot and Seam

Non-Heat Treatable 2011-T3 D(3) D C A D D D D

2011-T4, T451 D(3) D B A D D D D
Resistance to Corrosion Weldability (5) 2011-T8 D B D A D D D D
Wrought Alloys Stress Corrosion Workability Resistance: Spot 2014-0 – – – D D D D B
and Tempers General(1) Cracking(2) (Cold)(4) Machinability(4) Brazeabiltiy(5) Gas Arc and Seam
2014-T3, T4, T451 D(3) C C B D D B B
1100-0 A A A E A A A B
2014-T6, T651, T6510, T6511 D C D B D D B B
1100-H12 A A A E A A A A
2017-T4, T451 D(3) C C B D D B B
1100-H14 A A A D A A A A
2024-0 – – – D D D D D
1100-H16 A A B D A A A A
2024-T4, T3, T351, T3510, T3511 D(3) C C B D C B B
1100-H18 A A C D A A A A
2024-T6 D B C B D D C B
3003-0 A A A E A A A B
2024-T861, T81, T851, T8510, T8511 D B D B D D C B
3003-H12 A A A E A A A A
2050- T7451, T7651 C B D B D D D B
3003-H14 A A B D A A A A
6013-T651 B A C B B A A A
3003-H16 A A C D A A A A
6020-T8 B – – A B – B –
3003-H18 A A C D A A A A
6020-T9 B – – A B – B –
3003-H25 A A B D A A A A
6061-0 B A A D A A A B
5005-0 A A A E B A A B
6061-T4, T451, T4510, T4511 B B B C A A A A
5005-H12 A A A E B A A A
6061 -T6, T651, T652, T6510, T6511 B A C C A A A A
5005-H14 A A B D B A A A
6063-T1 A A B D A A A A
5005-H16 A A C D B A A A
6063-T4 A A B D A A A A
5005-H18 A A C D B A A A
6063-T5, T52 A A B C A A A A
5005-H32 A A A E B A A A
6063-T6 A A C C A A A A
5005-H34 A A B D B A A A
6063-T83, T831, T832 A A C C A A A A
5005-H36 A A C D B A A A
6101-T6, T63 A A C C A A A A
5005-H38 A A C D B A A A
6101-T61, T64 A A B D A A A A
5052-0 A A A D C A A B
6262-T6, T651, T6510, T6511 B A C B B B B A
5052-H32 A A B D C A A A
6262-T9 B A D B B B B A
5052-H34 A A B C C A A A
7050-T7451 C B D B D D D B
5052-H36 A A C C C A A A
7075-0 – – – D D D D B
5052-H38 A A C C C A A A
7075-T6, T651, T652, T6510, T6511 C(3)
C D B D D D B
5086-H32, H115 A(3) A(3) B D D C A A
7075-T73, T7351 C B D B D D D B

Notes for Comparative Characteristics:

(1) Ratings A through E are relative ratings in decreasing order of merit, based on (3) This rating may be different for material held at elevated temperature for long periods.
exposures to sodium chloride solution by intermittent spraying or immersion. Alloys (4) Ratings A through D for Workability (cold), and A through E for Machinability, are
with A and B ratings can be used in industrial and seacoast atmospheres without relative ratings in decreasing order of merit.
protection. Alloys with C, D, and E ratings generally should be protected at least on (5) Ratings A through D for Weldability and Brazeability are relative ratings defined as
faying surfaces. follows:
(2) Stress corrosion cracking ratings are based on service experience and on laboratory A = Generally weldable by all commercial procedures and methods.
tests of specimens exposed to the 3.5% sodium chloride alternate immersion test B = Weldable with special techniques or for specific applications which justify prelimi-
and are expressed as follows: nary trials or testing to develop welding procedure and weld performance.
A = No known instance of failure in service or in laboratory tests. C = Limited Weldability because of crack sensitivity or loss in resistance to corrosion
B = No known instance of failure in service; limited failures in laboratory tests of and mechanical properties.
short transverse specimens. D = No commonly used welding methods have been developed.
C = Service failures with sustained tension stress acting in short transverse direction
relative to grain structure; limited failures in laboratory tests of long transverse
specimens.
D = limited service failures with sustained longitudinal or long transverse stress.
13 For more information call (800) 926-260014

Round Bar 2024-T4 Round Aluminum Bar

Cold Finished – 12 Foot Mill Lengths
AMS 4120, AMS-QQ-A-225, ASTM B 211
6061-T651 Round Aluminum Bar
Cold Finished – 12 Foot Mill Lengths
AMS 4117, AMS-QQ-A-225, ASTM B 211

Diameter Diameter Pounds Diameter Diameter Pounds

2011-T3 Round Aluminum Bar 2024-T351 Round Aluminum Bar CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot
Cold Finished – 12 Foot Mill Lengths Cold Finished – 12 Foot Mill Lengths ALRD00328 0.1875 (±.0015) 0.0334 ALRD00006 0.5 (+-.002) 0.2309
ASTM B 211, ROHS Compliant AMS 4120, AMS-QQ-A-225, ASTM B 211 ALRD00211 0.25 (±.0015) 0.0589 ALRD00218 0.5625 (+-.002) 0.2922
ALRD01190 0.25 (±.0015) 0.0589 ALRD00430 0.625 (+-.002) 0.3608
Diameter Diameter Pounds Diameter Diameter Pounds ALRD00689 0.3125 (±.0015) 0.0929 ALRD00365 0.75 (+-.002) 0.5195
CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot ALRD00362 0.375 (±.0015) 0.1338 ALRD00303 0.8125 (+-.002) 0.6097
ALRD00644 0.125 (±.0015) 0.015 ALRD00022 0.5 (±.0015) 0.2355 ALRD00326 0.4375 (±.0015) 0.1821 ALRD00195 0.875 (+-.002) 0.7071
ALRD00056 0.1562 (±.0015) 0.0235 ALRD00278 0.5625 (±.002) 0.2981 ALRD00334 0.5 (±.0015) 0.2379 ALRD00476 0.9375 (+-.002) 0.8118
ALRD00586 0.1875 (±.0015) 0.0338 ALRD00811 0.625 (±.002) 0.3716 ALRD00507 7.5 (±.030) 52.9875 ALRD00037 1 (+-.002) 0.9236
ALRD00239 0.2187 (±.0015) 0.05 ALRD00668 0.6875 (±.002) 0.4452 ALRD00361 8 (±.030) 60.8909 ALRD00821 1.0625 (+-.0025) 1.0427
ALRD00704 0.25 (±.0015) 0.0601 ALRD00691 0.75 (±.002) 0.5352 ALRD00164 1.125 (+-.0025) 1.1689
ALRD00293 0.2812 (±.0015) 0.076 ALRD00040 0.8125 (±.002) 0.6281 ALRD00007 1.1875 (+-.0025) 1.3024
ALRD00456 0.3125 (±.0015) 0.0938 ALRD00388 0.875 (±.002) 0.7284 ALRD00226 1.25 (+-.0025) 1.4431
ALRD00381 0.3437 (±.0015) 0.1135 ALRD00357 0.9375 (±.002) 0.8362 ALRD00015 1.3125 (+-.0025) 1.5910
ALRD00414 1.375 (+-.0025) 1.7462
ALRD00107 0.375 (±.0015) 0.1351 ALRD00298 1 (±.002) 0.9514 6061-T6 Round Aluminum Bar
ALRD00545 0.4062 (±.0015) 0.1585 ALRD00848 1.0625 (±.0025) 1.0741 ALRD00813 1.5 (+-.0025) 2.0781
Extruded – 12 Foot Mill Lengths
ALRD00194 0.4375 (±.0015) 0.1839 ALRD00171 1.125 (±.0025) 1.2041 AMS-QQ-A-200, ASTM B 221 ALRD00688 1.5625 (+-.004) 2.2549
ALRD00356 0.4687 (±.0015) 0.2111 ALRD00066 1.1875 (±.0025) 1.3417 ALRD00272 1.625 (+-.004) 2.4389
ALRD00404 0.5 (±.0015) 0.2402 ALRD00828 1.25 (±.0025) 1.4866 ALRD00075 1.75 (+-.004) 2.8285
Diameter Diameter Pounds ALRD00219 1.875 (+-.004) 3.2470
ALRD00348 0.5312 (+.002) 0.2713 ALRD00252 1.3125 (±.0025) 1.639 CBS Part No. (Inches) Tolerance Per Foot
ALRD00240 0.5625 (±.002) 0.304 ALRD00376 1.375 (±.0025) 1.7988 ALRD00181 2 (+-.004) 3.6944
ALRD00331 0.1875 (±.007) 0.0325 ALRD00167 2.125 (+-.006) 4.1706
ALRD00571 0.625 (±.002) 0.3753 ALRD00237 1.4375 (±.0025) 1.966
ALRD00262 6.5 (±.044) 39.0035 ALRD00765 2.25 (+-.006) 4.6757
ALRD00036 0.6875 (±.002) 0.4541 ALRD00358 1.5 (±.0025) 2.1407
ALRD00102 7 (±.044) 45.2348 ALRD00147 2.375 (+-.006) 5.2097
ALRD00584 0.75 (±.002) 0.5405 ALRD00163 1.5625 (±.004) 2.3228
ALRD00607 0.8125 (±.002) 0.6343 ALRD00810 1.625 (±.004) 2.5123 ALRD00687 7.5 (+.044) 51.95256 ALRD00330 2.5 (+-.006) 5.7725
ALRD00778 0.875 (±.002) 0.7356 ALRD00775 1.75 (±.004) 2.9137 ALRD00366 8 (±.054) 59.0822 ALRD00711 2.625 (+-.006) 6.3642
ALRD00200 0.9375 (±.002) 0.8445 ALRD00283 1.875 (±.004) 3.3117 ALRD00834 8.5 (+.054) 66.73017 ALRD00818 2.75 (+-.006) 6.9847
ALRD00725 1 (±.002) 0.9608 ALRD00690 2 (±.004) 3.768 ALRD00081 9 (±.054) 74.776 ALRD00046 3 (+-.006) 8.3124
ALRD00314 1.0625 (±.0025) 1.0847 ALRD00038 2.125 (±.006) 4.2962 ALRD00804 9.25 (±.054) 78.9879 ALRD00070 3.25 (+-.008) 9.7555
ALRD00199 1.125 (±.0025) 1.2161 ALRD00829 2.25 (±.006) 4.8166 ALRD00669 9.5 (±.054) 83.3152 ALRD00010 3.5 (+-.012) 11.3141
ALRD00347 1.1875 (±.0025) 1.3549 ALRD00021 2.375 (±.006) 5.3666 ALRD00781 3.75 (+-.012) 12.9881
ALRD00259 10 (±.074) 92.316
ALRD00179 1.25 (±.0025) 1.5013 ALRD00769 2.5 (±.006) 5.9464 ALRD00166 4 (+-.012) 14.7776
ALRD00378 10.125 (±.074) 94.7227
ALRD00572 1.3125 (±.0025) 1.6552 ALRD00124 2.625 (±.006) 6.5559 ALRD00847 4.25 (+-.012) 16.6825
ALRD00103 10.25 (±.074) 96.9895 ALRD00287 4.5 (+-.012) 18.7029
ALRD00427 1.375 (±.0025) 1.8166 ALRD00544 2.75 (±.006) 7.1239
ALRD00360 10.5 (±.074) 101.679 ALRD00784 4.75 (+-.012) 20.8387
ALRD00033 1.4375 (±.0025) 1.9855 ALRD00692 2.75 (±.006) 7.1951
ALRD00774 11 (±.074) 111.702 ALRD00241 5 (+-.012) 23.0900
ALRD00506 1.5 (±.0025) 2.1619 ALRD00374 2.875 (±.006) 7.8641
ALRD00368 11.25 (±.074) 116.837 ALRD00235 5.25 (+-.020) 25.4568
ALRD00671 1.5625 (±.004) 2.3458 ALRD00041 3 (±.006) 8.5628
ALRD00236 1.625 (±.004) 2.5372 ALRD00693 3.125 (±.008) 9.2912 ALRD01036 11.5 (±.074) 122.088 ALRD00831 5.5 (+-.020) 27.9389
ALRD00709 1.6875 (±.004) 2.7361 ALRD00757 3.25 (±.008) 10.0494 ALRD00325 12 (±.084) 132.935 ALRD00044 6 (+-.020) 33.2496
ALRD00588 1.75 (±.004) 2.9426 ALRD00209 3.375 (±.008) 10.8373 ALRD00178 12.125 (+.125-.084) 135.719 ALRD00518 6.5 (+-.025) 39.0221
ALRD00035 1.875 (±.004) 3.378 ALRD00300 3.5 (±.012) 11.6549 ALRD00627 12.5 (±.084) 144.244 ALRD00292 7 (+-.025) 45.2564
ALRD00134 1.875 (+.004) 3.3796 ALRD00153 3.75 (±.012) 13.3793 ALRD00766 13 (±.084) 156.153 ALRD00242 8 (+-.030) 59.1105
ALRD00505 2 (±.004) 3.8434 ALRD00324 4 (±.012) 15.2227 ALRD01031 13.5 (+.094) 168.3263
ALRD00389 2.0625 (+.006) 4.0893 ALRD00318 4.25 (±.012) 17.185 ALRD00030 14 (±.094) 180.939
ALRD00601 2.125 (±.006) 4.3388 ALRD00830 4.5 (±.012) 19.2663 ALRD00207 15 (±.094) 207.896
ALRD00139 2.25 (±.006) 4.8643 ALRD00115 4.75 (±.012) 21.4664
ALRD00698 15 (+.1875-0) 210.416
ALRD00705 2.375 (±.006) 5.4197 ALRD00223 5 (±.012) 23.7855
ALRD00014 16 (+.104) 236.537
ALRD00541 2.5 (±.006) 6.0053 ALRD00844 5.25 (±.020) 26.2235
ALRD01095 16.125 (±.104) 240.036
ALRD00321 2.625 (±.006) 6.6208 ALRD00288 5.5 (±.020) 28.7805
ALRD00406 2.75 (±.006) 7.2664 ALRD00735 5.75 (±.020) 31.1449 ALRD00494 16.25 (±.125) 243.772
ALRD00135 2.875 (+.006) 7.9457 ALRD00123 6 (±.020) 34.2511 ALRD00534 17 (+.197-0) 266.793
ALRD00416 3 (±.006) 8.6476 ALRD00359 6.5 (±.025) 40.1975 ALRD00247 17.25 (+.25-0) 274.698
ALRD00793 3.125 (±.008) 9.3832 ALRD00799 7 (±.025) 46.6196 ALRD00771 18 (±.114) 299.1
ALRD00697 3.25 (±.008) 10.1489 ALRD00222 7.5 (±.030) 52.9875 ALRD00104 18.25 (±.114) 307.47
ALRD00591 3.5 (±.012) 11.7703 ALRD01192 8 (+.030) 60.3771 ALRD01174 19 (±.114) 333.261
ALRD00254 3.75 (+.012) 13.5183 ALRD00434 20 (±.124) 369.264
ALRD01049 21 (±.124) 407.114
ALRD00964 22 (±.134) 447.023
15 For more information call (800) 926-260016

6061-T6511 Round Aluminum Bar 7075-T651 Round Aluminum Bar 7075-T7351 Round Aluminum Bar
Extruded –­ 12 Foot Mill Lengths Cold Finished – 12 Foot Mill Lengths Cold Finished – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 221 AMS 4123, AMS-QQ-A-225, ASTM B 211 AMS 4124, AMS-QQ-A-225, ASTM B 211

Diameter Diameter Pounds Diameter Diameter Pounds Diameter Diameter Pounds Diameter Diameter Pounds
CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot
ALRD00825 0.25 (±.008) 0.0577 ALRD01181 4.625 (±.017) 19.747 ALRD00720 0.5 (+-.0015) 0.2380 ALRD00005 0.625 (+-.002) 0.3718
ALRD00002 0.3125 (±.008) 0.0902 ALRD00402 4.75 (±.017) 20.8288 ALRD00043 0.625 (+-.002) 0.3718 ALRD00011 0.75 (+-.002) 0.5354
ALRD00732 0.375 (±.005) 0.1298 ALRD00243 5 (±.022) 23.079 ALRD01157 0.625 (+-.002) 0.3718 ALRD00714 0.875 (+-.002) 0.7288
ALRD01046 0.375 (±.0025) 0.1298 ALRD00244 5.25 (±.022) 25.4446 ALRD01199 0.6875 (+-.002) 0.4499 ALRD00054 1 (+-.002) 0.9519
ALRD00155 0.4375 (±.005) 0.1767 ALRD00187 5.5 (±.022) 27.9256 ALRD00694 0.75 (+-.002) 0.5354 ALRD00843 1.25 (+-.0025) 1.4873
ALRD00741 0.5 (±.005) 0.2309 ALRD00249 5.75 (±.022) 30.522 ALRD01200 0.8125 (+-.002) 0.6284 ALRD01076 1.3125 (+-.0025) 1.6398
ALRD00845 0.5625 (±.004) 0.2921 ALRD00822 6 (±.022) 33.2338 ALRD00397 0.875 (+-.002) 0.7288 ALRD00464 1.375 (+-.0025) 1.7996
ALRD00391 0.625 (±.004) 0.3606 ALRD00268 6.125 (±.022) 34.6329 ALRD01158 0.875 (+-.002) 0.7288 ALRD00352 1.5 (+-.0025) 2.1417
ALRD00315 0.6875 (±.004) 0.4363 ALRD00013 6.25 (±.022) 36.0609 ALRD00561 1 (+-.002) 0.9519 ALRD00196 1.625 (+-.004) 2.5135
ALRD00418 0.75 (±.005) 0.5193 ALRD00383 6.5 (±.022) 39.0035 ALRD01159 1 (+-.002) 0.9519 ALRD00836 2 (+-.004) 3.8075
ALRD00186 0.8125 (±.004) 0.6094 ALRD00346 6.75 (±.044) 42.0615 ALRD01201 1.0625 (+-.0025) 1.0746 ALRD00382 2.25 (+-.006) 4.8189
ALRD00291 0.875 (±.004) 0.7068 ALRD00065 7 (±.044) 45.2348 ALRD00372 1.125 (+-.0025) 1.2047 ALRD00284 2.5 (+-.006) 5.9492
ALRD00009 0.9375 (±.004) 0.8114 ALRD00133 7.125 (±.044) 46.8648 ALRD00216 1.1875 (+-.0025) 1.3423 ALRD00853 2.75 (+-.006) 7.1986
ALRD00394 1 (±.005) 0.9232 ALRD00197 7.25 (±.044) 48.5236 ALRD00116 1.25 (+-.0025) 1.4873 ALRD00077 3 (+-.006) 8.5669
ALRD00816 1.0625 (±.006) 1.0422 ALRD01079 7.375 (±.044) 50.2112 ALRD01160 1.25 (+-.0025) 1.4873 ALRD00471 3.25 (+-.008) 10.0542
ALRD00329 1.125 (±.006) 1.1684 ALRD00309 7.5 (±.044) 51.9278 ALRD00220 1.375 (+-.0025) 1.7996 ALRD00373 3.5 (+-.012) 11.6605
ALRD00050 1.1875 (±.005) 1.3018 ALRD00012 8 (±.054) 59.0822 ALRD01161 1.375 (+-.0025) 1.7996 ALRD00370 3.75 (+-.012) 13.3857
ALRD00192 1.25 (±.005) 1.4424 ALRD00265 8.125 (±.054) 60.9734 ALRD00229 1.5 (+-.0025) 2.1417 ALRD00141 5 (+-.012) 23.7969
ALRD00172 1.3125 (±.005) 1.5903 ALRD00048 8.25 (±.054) 62.8646 ALRD01162 1.5 (+-.0025) 2.1417 ALRD01063 5.5 (+-.020) 28.7942
ALRD00667 1.375 (±.006) 1.7453 ALRD00299 8.5 (±.054) 66.6983 ALRD00042 1.625 (+-.004) 2.5135 ALRD00540 6 (+-.025) 34.2675
ALRD00837 1.4375 (±.005) 1.9076 ALRD00174 9 (±.054) 74.776 ALRD01163 1.625 (+-.004) 2.5135 ALRD00648 6.5 (+-.025) 40.2167
ALRD00339 1.5 (±.007) 2.0771 ALRD00322 1.75 (+-.004) 2.9151
ALRD00840 1.5 (±.021) 2.0781 ALRD01164 1.75 (+-.004) 2.9151
ALRD01033 1.505 (±.005) 2.0919 ALRD00323 1.875 (+-.004) 3.3464
ALRD01024 1.515 (±.006) 2.1198 ALRD01165 1.875 (+-.004) 3.3464
ALRD00301 1.5625 (±.006) 2.2548 6061-T6 Round Aluminum Bar ALRD00096 2 (+-.004) 3.8075
ALRD01073 1.5937 (±.006) 2.3447 ALRD01166 2 (+-.004) 3.8075
Cold Finished – 12 Foot Mill Lengths
ALRD00062 1.625 (±.021) 2.4338 AMS-QQ-A-225, ASTM B 211 ALRD00662 2.125 (+-.006) 4.2983
ALRD00393 1.625 (±.005) 2.4377 ALRD01167 2.125 (+-.006) 4.2983
ALRD00983 1.625 (±.006) 2.4388 ALRD00788 2.25 (+-.006) 4.8189
ALRD01042 1.6875 (±.005) 2.6288 Diameter Diameter Pounds ALRD01168 2.25 (+-.006) 4.8189
CBS Part No. (Inches) Tolerance Per Foot ALRD00706 2.375 (+-.006) 5.3692
ALRD00176 1.75 (±.006) 2.8285
ALRD00384 1.8125 (±.005) 3.0327 ALRD00282 0.125 (±.0015) 0.0144 ALRD01169 2.375 (+-.006) 5.3692
ALRD00068 1.875 (±.005) 3.2455 ALRD00258 0.1875 (±.0015) 0.0325 ALRD00090 2.5 (+-.006) 5.9492
ALRD00336 2 (±.008) 3.6926 ALRD00160 0.25 (±.0015) 0.0577 ALRD01170 2.5 (+-.006) 5.9492
ALRD00846 2.125 (±.008) 4.1686 ALRD00233 0.3125 (±.0015) 0.0902 ALRD00707 2.625 (+-.006) 6.5590
ALRD00984 2.1875 (±.008) 4.4175 ALRD00806 0.375 (±.0015) 0.1298 ALRD00215 2.75 (+-.006) 7.1986
ALRD00129 2.25 (±.008) 4.6735 ALRD00217 0.4375 (±.0015) 0.1767 ALRD01171 2.75 (+-.006) 7.1986
ALRD00795 2.375 (±.008) 5.2072 ALRD00157 0.5 (±.0015) 0.2308 ALRD00257 3 (+-.006) 8.5669
ALRD00312 2.5 (±.008) 5.7698 ALRD00320 0.625 (±.002) 0.3608 ALRD01172 3 (+-.006) 8.5669
ALRD01087 2.5625 (±.006) 6.0618 ALRD00835 3.25 (+-.008) 10.0542
ALRD00093 2.625 (±.008) 6.3641 ALRD00086 3.5 (+-.012) 11.6605
ALRD00105 2.75 (±.008) 6.9814 ALRD00749 3.75 (+-.012) 13.3857
ALRD00055 2.875 (±.008) 7.6305 ALRD00353 4 (+-.012) 15.2300
ALRD00114 3 (±.008) 8.3084 ALRD00280 4.25 (+-.012) 17.1932
ALRD00126 3.125 (±.012) 9.0152 ALRD00125 4.5 (+-.012) 19.2755
ALRD00173 3.25 (±.024) 9.7555 ALRD00354 4.75 (+-.012) 21.4767
ALRD00386 3.25 (±.012) 9.7509 ALRD00189 5 (+-.012) 23.7969
ALRD00752 .375 (±.012) 10.520 ALRD00032 5.25 (+-.020) 26.2360
ALRD00772 3.5 (±.012) 11.308 ALRD00264 5.5 (+-.020) 28.7942
ALRD00313 3.625 (±.012) 12.130 ALRD00826 6 (+-.020) 34.2675
ALRD00433 3.75 (±.012) 12.981 ALRD00992 6.25 (+-.025) 37.1826
ALRD00285 4 (±.017) 14.777 ALRD00439 6.5 (+-.025) 40.2167
ALRD00127 4.125 (±.017) 15.708 ALRD00180 7 (+-.025) 46.6419
ALRD00246 4.25 (±.017) 16.674 ALRD00031 8 (+-.030) 60.9200
ALRD00856 4.375 (±.017) 17.669
ALRD00814 4.5 (±.017) 18.694
17 For more information call (800) 926-260018

Square Bar 6061-T6511 Square Aluminum Bar

Extruded – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 221

6061-T6511 Square Aluminum Bar Manifold quality bar features elevated mechanical properties along with twist,
2024-T351 Square Aluminum Bar Manifold Quality straightness, and dimensional tolerances one half that of standard commercial bar. All
dimensional tolerances are on the plus side.
Cold Finished – 12 Foot Mill Lengths Extruded – 12 Foot Mill Lengths
AMS 4120, AMS-QQ-A-225, ASTM B 211 AMS-QQ-A-200, ASTM B 221 Size Size Pounds
CBS Part No. (Inches) Tolerance Per Foot
Size Size Pounds Size Size Pounds ALSQ00045 0.375 (±.008) 0.1654
CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot ALSQ00116 0.5 (±.009) 0.294
ALSQ00001 0.375 (±.002) 0.1688 ALSQ00135 1 (+.012-0) 1.190 ALSQ00034 0.625 (±.009) 0.4594
ALSQ00037 0.5 (±.002) 0.303 ALSQ00137 1.25 (±.012-0) 1.855 ALSQ00019 0.75 (±.010) 0.6615
ALSQ00132 0.5625 (±.0025) 0.3797 ALSQ00138 1.5 (+.014-0) 2.6708 ALSQ00020 0.875 (±.010) 0.9004
ALSQ00044 0.75 (±.0025) 0.6818 ALSQ00141 1.75 (+.024-0) 3.6511 ALSQ00013 1 (±.012) 1.176
ALSQ00048 0.875 (±.0025) 0.9279 ALSQ00070 2 (+.024-0) 4.761 ALSQ00015 1.125 (±.012) 1.4884
ALSQ00028 1 (±.0025) 1.212 ALSQ00143 2.25 (±.024-0) 6.0172 ALSQ00100 1.25 (±.012) 1.8375
ALSQ00120 1.125 (±.003) 1.5339 ALSQ00064 2.5 (+.024-0) 7.421 ALSQ00053 1.375 (±.012) 2.249
ALSQ00011 1.25 (±.003) 1.8935 ALSQ00009 2.75 (+.024-0) 8.971 ALSQ00039 1.5 (±.014) 2.646
ALSQ00043 1.25 (±.003) 1.8935 ALSQ00110 3 (+.024-0) 10.669 ALSQ00004 1.625 (±.014) 3.1054
ALSQ00041 1.5 (±.003) 2.727 ALSQ00131 3.25 (+.024-0) 12.513 ALSQ00094 1.75 (±.014) 3.6015
ALSQ00017 1.75 (±.005) 3.7118 ALSQ00098 3.5 (+.024-0) 14.505 ALSQ00057 1.875 (±.014) 4.135
ALSQ00038 2 (±.005) 4.8 ALSQ00140 3.75 (+.024-0) 16.6435 ALSQ00067 2 (±.024) 4.704
ALSQ00035 2.5 (±.008) 7.575 ALSQ00101 4 (+.034-0) 18.976 ALSQ00023 2.25 (±.024) 5.9535
ALSQ00025 3 (±.008) 10.908 ALSQ00058 4.5 (+.034-0) 23.994 ALSQ00051 2.5 (±.024) 7.35
ALSQ00042 4 (±.020) 19.392 ALSQ00129 4.75 (+.034-0) 26.724 ALSQ00107 2.75 (±.024) 8.8935
ALSQ00085 5 (+.034-0) 29.600 ALSQ00115 3 (±.024) 10.584
ALSQ00078 5.5 (+.034-0) 35.794 ALSQ00005 3.25 (±.024) 12.4215
ALSQ00074 6 (+.044-0) 42.647 ALSQ00030 3.5 (±.024) 14.4061
ALSQ00134 6.5 (+.044-0) 50.0229 ALSQ00122 3.625 (±.024) 15.416
6061-T6 Square Aluminum Bar ALSQ00016 3.75 (±.024) 16.5375
Extruded – 12 Foot Mill Lengths ALSQ00050 4 (±.034) 18.816
AMS-QQ-A-200, ASTM B 221 ALSQ00052 4.5 (±.034) 23.814
ALSQ00033 4.75 (±.034) 26.534
7075-T651 Square Aluminum Bar ALSQ00055 5 (±.034) 29.4
Size Size Pounds
CBS Part No. (Inches) Tolerance Per Foot Cold Finished – 12 Foot Mill Lengths ALSQ00113 5.5 (±.034) 35.574
AMS 4123, AMS-QQ-A-225, ASTM B 211 ALSQ00027 6 (±.044) 42.336
ALSQ00108 0.25 (±.008) 0.0735
ALSQ00076 7 (±.044) 57.624
ALSQ00022 8 (±.054) 75.264
ALSQ00103 7.5 (±.044) 66.15
Size Size Pounds
CBS Part No. (Inches) Tolerance Per Foot
ALSQ00125 0.875 (±.0025) 0.9279
ALSQ00118 1 (±.0025) 1.212
ALSQ00010 1.5 (±.003) 2.727
ALSQ00014 2 (±.005) 4.848
ALSQ00092 2.25 (±.008) 6.1358
ALSQ00069 2.5 (±.008) 7.575
19 For more information call (800) 926-260020

Rectangular Bar 6061-T6511 Rectangular Aluminum Bar

Extruded – 12 Foot Mill Lengths, AMS-QQ-A-200, ASTM B 211

Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds
2024-T4 Rectangular Aluminum Bar 2024-T351 Rectangular Aluminum Bar CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
Cold Finished – 12 Foot Mill Lengths Cold Finished – 12 Foot Mill Lengths
ALREC00315 0.125 (+-.007) 0.5 (+-.009) 0.0735 ALREC00911 0.3125 (+-.008) 4 (+-.034) 1.47
AMS 4120, AMS-QQ-A-225, ASTM B 211 AMS 4120, AMS-QQ-A-225, ASTM B 211
ALREC00778 0.125 (+-.007) 0.75 (+-.010) 0.1103 ALREC00737 0.375 (+-.008) 0.5 (+-.009) 0.2205
ALREC00253 0.125 (+-.007) 1 (+-.012) 0.147 ALREC00828 0.375 (+-.008) 0.625 (+-.009) 0.2756
Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds ALREC00279 0.125 (+-.007) 1.25 (+-.012) 0.1838 ALREC00203 0.375 (+-.008) 0.75 (+-.010) 0.3308
CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALREC00005 0.125 (+-.007) 1.5 (+-.014) 0.2205 ALREC00208 0.375 (+-.008) 1 (+-.012) 0.441
ALREC00243 0.125 (±.002) 1 (±.0025) 0.1500 ALREC00979 0.25 (±.002) 2.5 (±.008) 0.7500 ALREC00035 0.125 (+-.007) 2 (+-.024) 0.294 ALREC00271 0.375 (+-.008) 1.25 (+-.012) 0.5513
ALREC00849 0.1875 (±.002) 1.5 (±.003) 0.3375 ALREC00300 0.5 (±.002) 0.75 (±.0025) 0.4500 ALREC00151 0.125 (+-.007) 2.5 (+-.024) 0.3675 ALREC00036 0.375 (+-.008) 1.5 (+-.014) 0.6615
ALREC00022 0.25 (±.002) 0.75 (±.0025) 0.2250 ALREC00823 0.5 (±.002) 1 (±.0025) 0.6000 ALREC00201 0.125 (+-.007) 3 (+-.024) 0.441 ALREC00853 0.375 (+-.008) 1.75 (+-.014) 0.7718
ALREC00783 0.25 (±.002) 1 (±.0025) 0.3000 ALREC00206 0.5 (±.002) 1.25 (±.003) 0.7500 ALREC00329 0.125 (+-.007) 4 (+-.034) 0.588 ALREC00133 0.375 (+-.008) 2 (+-.024) 0.882
ALREC00793 0.25 (±.002) 1.25 (±.003) 0.3750 ALREC00334 0.5 (±.002) 1.5 (±.003) 0.9000 ALREC00361 0.125 (+-.007) 6 (+-.044) 0.882 ALREC00246 0.375 (+-.008) 2.5 (+-.024) 1.1025
ALREC00841 0.25 (±.002) 1.5 (±.003) 0.4500 ALREC00732 0.5 (±.002) 2 (±.005) 1.2000 ALREC00955 0.1875 (+-.007) 0.375 (+-.008) 0.083 ALREC00153 0.375 (+-.008) 3 (+-.024) 1.323
ALREC00856 0.25 (±.002) 2 (±.005) 0.6000 ALREC00164 0.5 (±.002) 2.5 (±.008) 1.5000 ALREC00769 0.1875 (+-.007) 0.5 (+-.009) 0.1103 ALREC00809 0.375 (+-.008) 3.5 (+-.024) 1.543
ALREC00821 0.3125 (±.002) 0.75 (±.0025) 0.2813 ALREC00771 0.5 (±.002) 3 (±.008) 1.8000 ALREC00161 0.1875 (+-.007) 0.625 (+-.009) 0.1378 ALREC00819 0.375 (+-.008) 4 (+-.034) 1.764
ALREC00224 0.3125 (±.002) 1.5 (±.003) 0.5625 ALREC00008 0.5 (±.002) 4 (±.010) 2.4000 ALREC00041 0.1875 (+-.007) 0.75 (+-.010) 0.1654 ALREC00962 0.375 (+-.008) 4.5 (+-.034) 1.9845
ALREC00794 0.375 (±.002) 0.5 (±.002) 0.2250 ALREC00146 0.625 (±.0025) 1 (±.0025) 0.7500 ALREC00843 0.1875 (+-.007) 1 (+-.012) 0.2205 ALREC00160 0.375 (+-.008) 5 (+-.034) 2.205
ALREC00947 0.375 (±.002) 0.625 (±.0025) 0.2813 ALREC00335 0.625 (±.0025) 1.5 (±.003) 1.1250 ALREC00083 0.1875 (+-.007) 1.25 (+-.012) 0.2757 ALREC01075 0.375 (+-.008) 5.5 (+-.034) 2.4255
ALREC00890 0.375 (±.002) 0.75 (±.0025) 0.3375 ALREC00718 0.625 (±.0025) 2 (±.003) 1.5000 ALREC00009 0.1875 (+-.007) 1.5 (+-.014) 0.3308 ALREC00074 0.375 (+-.008) 6 (+-.044) 2.646
ALREC00184 0.375 (±.002) 1 (±.0025) 0.4500 ALREC00294 0.75 (±.0025) 1 (±.0025) 0.9000 ALREC00988 0.1875 (+-.007) 2 (+-.024) 0.4398 ALREC01120 0.375 (+-.008) 6.5 (+-.044) 2.8665
ALREC00195 0.375 (±.002) 1.25 (±.003) 0.5625 ALREC00860 0.75 (±.0025) 1.25 (±.003) 1.1250 ALREC00280 0.1875 (+-.007) 2 (+-.024) 0.441 ALREC00489 0.375 (+-.008) 7 (+-.044) 3.087
ALREC00727 0.375 (±.002) 1.5 (±.003) 0.6750 ALREC00242 0.75 (±.0025) 1.5 (±.003) 1.3500 ALREC00779 0.1875 (+-.007) 2.5 (+-.024) 0.5513 ALREC00115 0.375 (+-.008) 7.5 (+-.044) 3.3075
ALREC00865 0.375 (±.002) 2 (±.005) 0.9000 ALREC00282 0.75 (±.0025) 1.75 (±.003) 1.5750 ALREC00874 0.1875 (+-.007) 3 (+-.024) 0.6615 ALREC00051 0.375 (+-.008) 8 (+-.054) 3.528
ALREC00848 0.375 (±.002) 3 (±.008) 1.3500 ALREC00240 0.75 (±.0025) 2 (±.005) 1.8000 ALREC00862 0.1875 (+-.007) 3.75 (+-.024) 0.8269 ALREC01010 0.375 (+.016-0) 8 (+.108-0) 3.628
ALREC00020 0.75 (±.0025) 2.5 (±.008) 2.2500 ALREC00029 0.1875 (+-.007) 4 (+-.034) 0.822 ALREC00618 0.375 (+-.008) 8.5 (+-.054) 3.7485
ALREC00293 0.75 (±.0025) 3 (±.008) 2.7000 ALREC00214 0.25 (+-.008) 0.375 (+-.009) 0.1103 ALREC00059 0.375 (+-.016) 10 (+-.074) 4.41
ALREC00244 1 (±.0025) 1.25 (±.003) 1.5000 ALREC00233 0.25 (+-.008) 0.5 (+-.009) 0.147 ALREC01011 0.375 (+.016-0) 10 (+.148-0) 4.5374
ALREC00295 1 (±.0025) 1.5 (±.003) 1.8000 ALREC00052 0.25 (+-.008) 0.625 (+-.009) 0.1838 ALREC00236 0.375 (+-.016) 12 (+-.084) 5.292
ALREC00801 1 (±.0025) 1.75 (±.003) 2.1000 ALREC00230 0.25 (+-.008) 0.75 (+-.010) 0.2205 ALREC01012 0.375 (+.016-0) 12 (+.168-0) 5.442
ALREC00303 1 (±.0025) 2 (±.005) 2.4000 ALREC00255 0.25 (+-.008) 1 (+-.012) 0.294 ALREC00284 0.375 (+-.016) 14 (+-.094) 6.174
ALREC00717 1 (±.0025) 2.5 (±.008) 3.0000 ALREC00179 0.25 (+-.008) 1.25 (+-.012) 0.3675 ALREC01013 0.375 (+.016-0) 14 (+.188-0) 6.3481
ALREC00804 1 (±.0025) 3 (±.008) 3.6000 ALREC00281 0.25 (+-.008) 1.5 (+-.014) 0.441 ALREC01066 0.375 (+.016) 16 (+.188) 7.056
ALREC00719 1 (±.0025) 3.5 (±.010) 4.2000 ALREC00231 0.25 (+-.008) 1.75 (+-.014) 0.5145 ALREC00049 0.5 (+-.009) 0.625 (+-.009) 0.3675
ALREC00040 1 (±.0025) 4 (±.010) 4.8000 ALREC00289 0.25 (+-.008) 2 (+-.024) 0.588 ALREC00882 0.5 (+-.009) 0.75 (+-.010) 0.441
ALREC01119 1 (±.0025) 5 (±.015) 6.0000 ALREC01096 0.25 (+-.008) 2.25 (+-.024) 0.6615 ALREC00229 0.5 (+-.009) 1 (+-.012) 0.558
ALREC00772 1 (±.0025) 6 (±.030) 7.2000 ALREC00241 0.25 (+-.008) 2.5 (+-.024) 0.735 ALREC00139 0.5 (+-.009) 1.25 (+-.012) 0.735
ALREC00725 1.25 (±.003) 1.5 (±.003) 2.2500 ALREC00359 0.25 (+-.008) 2.75 (+-.024) 0.8085 ALREC00278 0.5 (+-.009) 1.5 (+-.014) 0.882
ALREC00715 1.25 (±.003) 1.75 (±.003) 2.6250 ALREC00270 0.25 (+-.008) 3 (+-.024) 0.882 ALREC00238 0.5 (+-.009) 1.75 (+-.014) 1.029
ALREC00032 1.25 (±.003) 2 (±.005) 3.0000 ALREC00172 0.25 (+-.008) 3.5 (+-.024) 1.029 ALREC00800 0.5 (+-.009) 2 (+-.024) 1.176
ALREC00807 1.25 (±.003) 2.5 (±.008) 3.7500 ALREC00875 0.25 (+-.008) 4 (+-.034) 1.176 ALREC00787 0.5 (+-.009) 2.25 (+-.024) 1.323
ALREC00137 1.25 (±.003) 3 (±.008) 4.5000 ALREC00452 0.25 (+-.008) 4.5 (+-.034) 1.3223 ALREC00852 0.5 (+-.009) 2.5 (+-.024) 1.47
ALREC00218 1.5 (±.003) 2 (±.005) 3.6000 ALREC00202 0.25 (+-.008) 5 (+-.034) 1.47 ALREC00829 0.5 (+-.009) 2.75 (+-.024) 1.617
ALREC00144 1.5 (±.003) 2.5 (±.008) 4.5000 ALREC00892 0.25 (+-.008) 6 (+-.044) 1.764 ALREC00879 0.5 (+-.009) 3 (+-.024) 1.764
ALREC00693 1.5 (±.003) 3 (±.008) 5.4000 ALREC00419 0.25 (+-.008) 6.5 (+-.044) 1.911 ALREC00883 0.5 (+-.009) 3.5 (+-.024) 2.058
ALREC00100 1.5 (±.003) 4 (±.010) 7.2000 ALREC00625 0.25 (+-.008) 7 (+-.044) 2.058 ALREC00140 0.5 (+-.009) 4 (+-.034) 2.352
ALREC00811 1.75 (±.005) 3 (±.008) 6.3000 ALREC00276 0.25 (+-.008) 8 (+-.054) 2.352 ALREC00548 0.5 (+-.009) 4.5 (+-.034) 2.646
ALREC00575 1.75 (±.005) 4 (±.010) 8.4000 ALREC01008 0.25 (+.016-0) 8 (+.108-0) 2.444 ALREC00870 0.5 (+-.009) 5 (+-.034) 2.94
ALREC00071 2 (±.005) 2.5 (±.008) 6.0000 ALREC01097 0.25 (+-.008) 9 (+-.054) 2.646 ALREC01087 0.5 (+-.009) 5.5 (+-.044) 3.234
ALREC00721 2 (±.005) 3 (±.008) 7.2000 ALREC00099 0.25 (+-.016) 10 (+-.074) 2.94 ALREC00328 0.5 (+-.009) 6 (+-.044) 3.528
ALREC00210 2 (±.005) 3.5 (±.010) 8.4000 ALREC01005 0.25 (+.016-0) 10 (+.148-0) 3.056 ALREC00302 0.5 (+-.009) 6.5 (+-.044) 3.822
ALREC00259 2 (±.005) 4 (±.010) 9.6000 ALREC00817 0.25 (+-.016) 12 (+-.084) 3.528 ALREC00037 0.5 (+-.009) 7 (+-.044) 4.116
ALREC00296 2.5 (±.008) 3 (±.008) 9.0000 ALREC01009 0.25 (+.016-0) 12 (+.168-0) 3.528 ALREC00126 0.5 (+-.009) 8 (+-.054) 4.704
ALREC00239 2.5 (±.008) 4 (±.010) 12.0000 ALREC00297 0.25 (+-.016) 14 (+-.094) 4.116 ALREC01014 0.5 (+.022-0) 8 (+.108-0) 4.84
ALREC00211 3 (±.008) 4 (±.010) 14.4000 ALREC00123 0.3125 (+-.008) 0.5 (+-.009) 0.1838 ALREC00368 0.5 (+-.009) 9 (+-.054) 5.292
ALREC00088 3 (±.008) 4.5 (±.015) 16.2000 ALREC00319 0.3125 (+-.008) 0.75 (+-.010) 0.2756 ALREC00058 0.5 (+-.017) 10 (+-.074) 5.88
ALREC00731 3 (±.008) 5 (±.015) 18.0000 ALREC00724 0.3125 (+-.008) 1 (+-.012) 0.3675 ALREC01015 0.5 (+.022-0) 10 (+.148-0) 6.054
ALREC00258 3 (±.008) 6 (±.030) 21.6000 ALREC00701 0.3125 (+-.008) 1.25 (+-.012) 0.4594 ALREC00118 0.5 (+-.017) 12 (+-.084) 7.056
ALREC00751 4 (±.010) 4.5 (±.015) 21.6000 ALREC00197 0.3125 (+-.008) 1.5 (+-.014) 0.5513 ALREC01016 0.5 (+.022-0) 12 (+.168-0) 7.262
ALREC01052 4 (±.010) 5 (±.015) 24.0000 ALREC00844 0.3125 (+-.008) 2 (+-.024) 0.735 ALREC00455 0.5 (+-.017) 14 (+-.094) 8.232
ALREC00150 0.3125 (+-.008) 3 (+-.024) 1.1025

† Flatness better than one-quarter commercial standards. Surface finish better than commercial standards. Continued next page.
21 For more information call (800) 926-260022

6061-T6511 Rectangular Aluminum Bar 6061-T6511 Rectangular Aluminum Bar

cont. cont.
Extruded – 12 Foot Mill Lengths Extruded – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 211 AMS-QQ-A-200, ASTM B 211

Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds
CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALREC01017 0.5 (+.022-0) 14 (+.188-0) 8.4636 ALREC00999 1 (+.012-0) 1.5 (+.014-0) 1.7829 ALREC00402 1.25 (+-.012) 5 (+-.034) 7.35 ALREC00001 1.75 (+-.014) 4 (+-.034) 8.4
ALREC01067 0.5 (+.022-0) 16 (+.208-0) 9.4998 ALREC00024 1 (+-.012) 1.75 (+-.014) 2.058 ALREC00670 1.25 (+.014-0) 5 (+.034-0) 7.4163 ALREC00103 1.75 (+-.014) 4.5 (+-.034) 9.261
ALREC00190 0.625 (+-.009) 0.75 (+-.010) 0.5513 ALREC01000 1 (+.012-0) 1.75 (+.024-0) 2.0845 ALREC00200 1.25 (+-.012) 5.5 (+-.034) 8.085 ALREC00345 1.75 (+.014-0) 4.5 (+.034-0) 9.3332
ALREC00845 0.625 (+-.009) 1 (+-.012) 0.735 ALREC00173 1 (+-.012) 2 (+-.024) 2.352 ALREC00791 1.25 (+.014-0) 5.5 (+.034-0) 8.1554 ALREC01086 1.75 (+-.014) 5 (+-.034) 10.29
ALREC00733 0.625 (+-.009) 1.25 (+-.012) 0.9188 ALREC00775 1 (+.012-0) 2 (+.024-0) 2.38 ALREC00822 1.25 (+-.012) 6 (+-.044) 8.82 ALREC00006 1.75 (+-.014) 5.5 (+-.034) 11.319
ALREC00263 0.625 (+-.009) 1.5 (+-.014) 1.125 ALREC00104 1 (+-.012) 2.25 (+-.024) 2.646 ALREC01063 1.25 (+.012-0) 6 (+.044-0) 8.8948 ALREC00362 1.75 (+.014-0) 5.5 (+.034-0) 11.3994
ALREC00054 0.625 (+-.009) 1.75 (+-.014) 1.2863 ALREC00174 1 (+-.012) 2.5 (+-.024) 2.94 ALREC01085 1.25 (+-.012) 7 (+-.044) 10.29 ALREC00542 1.75 (+-.014) 6 (+-.044) 12.348
ALREC00292 0.625 (+-.009) 2 (+-.024) 1.47 ALREC00438 1 (+.012-0) 2.5 (+.024-0) 2.9718 ALREC00062 1.25 (+-.012) 8 (+-.054) 11.76 ALREC01037 1.75 (+.048-0) 8 (+.108-0) 16.803
ALREC00055 0.625 (+-.009) 2.5 (+-.024) 1.8375 ALREC00885 1 (+-.012) 2.75 (+-.024) 3.234 ALREC01031 1.25 (+.038-0) 8 (+.108-0) 12.02 ALREC00620 1.75 (+-.014) 8.5 (+-.054) 17.493
ALREC00695 0.625 (+-.009) 3 (+-.024) 2.205 ALREC00290 1 (+-.012) 3 (+-.024) 3.528 ALREC00272 1.25 (+-.019) 10 (+-.084) 14.7 ALREC01038 1.75 (+.048-0) 12 (+.148-0) 25.21
ALREC00266 0.625 (+-.009) 3.25 (+-.024) 2.3888 ALREC00429 1 (+.012-0) 3 (+.024-0) 3.563 ALREC01069 1.25 (+.038-0) 10 (+.148-0) 15.0339 ALREC00878 1.75 (+-.024) 14 (+-.094) 28.812
ALREC00188 0.625 (+-.009) 4 (+-.034) 2.94 ALREC00249 1 (+-.012) 3.5 (+-.024) 4.116 ALREC00098 1.25 (+-.012) 12 (+-.084) 17.64 ALREC00877 2 (+-.024) 2.25 (+-.024) 5.292
ALREC00631 0.625 (+-.009) 4.5 (+-.034) 3.3075 ALREC00708 1 (+.012-0) 3.5 (+.024-0) 4.1478 ALREC01032 1.25 (+.038-0) 12 (+.168-0) 18.034 ALREC00148 2 (+-.024) 2.5 (+-.024) 5.88
ALREC00181 0.625 (+-.009) 5 (+-.034) 3.675 ALREC00750 1 (+-.012) 4 (+-.034) 4.704 ALREC00756 1.25 (+-.019) 14 (+-.094) 20.58 ALREC00363 2 (+.024-0) 2.5 (+.024-0) 5.9437
ALREC00155 0.625 (+-.009) 6 (+-.044) 4.41 ALREC00984 1 (+.012-0) 4 (+.034-0) 4.752 ALREC00021 1.5 (+-.014) 1.75 (+-.014) 3.087 ALREC00553 2 (+-.024) 2.75 (+-.024) 6.458
ALREC00193 0.625 (+-.017) 8 (+-.064) 5.88 ALREC00232 1 (+-.012) 4.5 (+-.034) 5.292 ALREC00401 1.5 (+-.014) 2 (+-.024) 3.528 ALREC00182 2 (+-.024) 3 (+-.024) 7.056
ALREC01018 0.625 (+.022-0) 8 (+.108-0) 6.0239 ALREC01001 1 (+.012-0) 4.5 (+.034-0) 5.3439 ALREC00415 1.5 (+.014-0) 2 (+.024-0) 3.566 ALREC00413 2 (+.024-0) 3 (+.024-0) 7.127
ALREC00142 0.625 (+-.017) 10 (+-.074) 7.35 ALREC00177 1 (+-.012) 5 (+-.034) 5.88 ALREC00514 1.5 (+-.014) 2.25 (+-.024) 3.969 ALREC00227 2 (+-.024) 3.25 (+-.024) 7.644
ALREC01019 0.625 (+.022-0) 10 (+.148-0) 7.535 ALREC00998 1 (+.012-0) 5 (+.034-0) 5.936 ALREC00304 1.5 (+-.014) 2.5 (+-.024) 4.41 ALREC00681 2 (+.024-0) 3.5 (+.024-0) 8.3098
ALREC00995 0.625 (+-.017) 11 (+-.049) 8.085 ALREC01132 1 (+.012-0) 5.5 (+.034-0) 6.5269 ALREC00509 1.5 (+.014-0) 2.5 (+.024-0) 4.452 ALREC00692 2 (+-.024) 3.5 (+-.024) 8.4
ALREC00729 0.625 (+-.017) 12 (+-.084) 8.82 ALREC00023 1 (+-.012) 6 (+-.044) 7.056 ALREC00710 1.5 (+-.012) 2.75 (+-.024) 4.851 ALREC00057 2 (+-.024) 4 (+-.034) 9.408
ALREC01020 0.625 (+.022-0) 12 (+.168-0) 9.038 ALREC00903 1 (+-.012) 6.25 (+-.044) 7.35 ALREC00275 1.5 (+-.014) 3 (+-.024) 5.292 ALREC00414 2 (+.024-0) 4 (+.034-0) 9.505
ALREC00873 0.625 (+-.017) 14 (+-.094) 10.29 ALREC01088 1 (+-.012) 6.5 (+-.044) 7.644 ALREC00457 1.5 (+.014-0) 3 (+.024-0) 5.338 ALREC00219 2 (+-.034) 4.5 (+-.034) 10.584
ALREC01021 0.625 (+.022-0) 14 (+.188-0) 10.54 ALREC00260 1 (+-.012) 7 (+-.044) 8.232 ALREC00220 1.5 (+-.014) 3.5 (+-.074) 6.174 ALREC00971 2 (+.024-0) 4.5 (+.034-0) 10.687
ALREC00644 0.75 (+-.01) 0.875 (+-.01) 0.7718 ALREC01050 1 (+.024-0) 7.75 (+.088-0) 9.34 ALREC00517 1.5 (+.014-0) 4 (+.034-0) 7.119 ALREC00428 2 (+.024-0) 5 (+.034-0) 11.871
ALREC00857 0.75 (+-.010) 1 (+-.012) 0.882 ALREC00191 1 (+-.012) 8 (+-.054) 9.408 ALREC00630 1.5 (+-.014) 4 (+-.034) 7.056 ALREC00850 2 (+-.034) 5 (+-.034) 11.76
ALREC00105 0.75 (+-.010) 1.25 (+-.012) 1.1025 ALREC01026 1 (+.038-0) 8 (+.108-0) 9.651 ALREC00399 1.5 (+.014-0) 4.5 (+.034-0) 8.005 ALREC00818 2 (+-.024) 6 (+-.044) 14.112
ALREC00806 0.75 (+-.010) 1.5 (+-.014) 1.323 ALREC00706 1 (+-.019) 8.5 (+-.054) 9.996 ALREC00636 1.5 (+-.014) 4.5 (+-.034) 7.938 ALREC00972 2 (+.024-0) 6 (+.044-0) 14.2487
ALREC00833 0.75 (+-.010) 1.75 (+-.014) 1.5435 ALREC00713 1 (+-.019) 10 (+-.074) 11.76 ALREC00047 1.5 (+-.014) 5 (+-.034) 8.82 ALREC00314 2 (+-.024) 6.5 (+-.044) 15.288
ALREC00881 0.75 (+-.010) 2 (+-.024) 1.764 ALREC01027 1 (+.038-0) 10 (+.148-0) 12.072 ALREC01003 1.5 (+.014-0) 5 (+.034-0) 8.8913 ALREC00400 2 (+.024-0) 6.5 (+.044-0) 15.432
ALREC00437 0.75 (+-.010) 2.25 (+-.024) 1.9845 ALREC00286 1 (+-.019) 12 (+-.084) 14.112 ALREC00254 1.5 (+-.014) 5.5 (+-.034) 9.702 ALREC00082 2 (+-.024) 7 (+-.044) 16.464
ALREC00252 0.75 (+-.010) 2.5 (+-.024) 2.205 ALREC01028 1 (+.038-0) 12 (+.168-0) 14.481 ALREC00539 1.5 (+.014-0) 5.5 (+.044-0) 9.7863 ALREC00124 2 (+-.024) 8 (+-.054) 18.816
ALREC00310 0.75 (+-.010) 2.75 (+-.024) 2.4255 ALREC00288 1 (+-.019) 14 (+-.094) 16.464 ALREC00147 1.5 (+-.014) 6 (+-.044) 10.584 ALREC01039 2 (+.054-0) 8 (+.108-0) 19.198
ALREC00894 0.75 (+-.010) 3 (+-.024) 2.646 ALREC01029 1 (+.038-0) 14 (+.188-0) 16.89 ALREC00448 1.5 (+.014-0) 6 (+.044-0) 10.672 ALREC00050 2 (+-.024) 8.5 (+-.054) 19.992
ALREC00048 0.75 (+-.010) 3.5 (+-.024) 3.087 ALREC01030 1 (+.038-0) 16 (+.208-0) 19.298 ALREC00372 1.5 (+.014-0) 6.5 (+.044-0) 11.558 ALREC00496 2 (+.024-0) 8.5 (+.108-0) 20.175
ALREC00256 0.75 (+-.010) 4 (+-.034) 3.528 ALREC01081 1 (+.038-0) 18 (+.288-0) 21.168 ALREC00757 1.5 (+-.014) 6.5 (+-.044) 11.466 ALREC00175 2 (+-.034) 10 (+-.074) 23.52
ALREC00440 0.75 (+-.010) 4.5 (+-.034) 3.969 ALREC01077 1.125 (+.012-0) 2 (+.024-0) 2.6903 ALREC00318 1.5 (+-.014) 7 (+-.044) 12.348 ALREC01040 2 (+.054-0) 10 (+.148-0) 24.014
ALREC00872 0.75 (+-.010) 5 (+-.034) 4.41 ALREC00393 1.125 (+.012-0) 2.5 (+.024-0) 3.341 ALREC00117 1.5 (+-.014) 8 (+-.054) 14.112 ALREC00064 2 (+-.034) 12 (+-.084) 28.224
ALREC00274 0.75 (+-.010) 6 (+-.044) 5.292 ALREC00007 1.25 (+-.012) 1.5 (+-.014) 2.205 ALREC01033 1.5 (+.038-0) 8 (+.108-0) 14.387 ALREC01041 2 (+.054-0) 12 (+.168-0) 28.805
ALREC01089 0.75 (+-.010) 6.5 (+-.044) 5.733 ALREC01080 1.25 (+-.012) 1.625 (+-.014) 2.3888 ALREC00342 1.5 (+.014-0) 8.5 (+.054-0) 15.0764 ALREC00628 2 (+-.034) 14 (+-.094) 32.928
ALREC00084 0.75 (+-.010) 7 (+-.044) 6.174 ALREC00268 1.25 (+-.012) 1.75 (+-.014) 2.5725 ALREC00523 1.5 (+-.014) 9 (+-.054) 15.876 ALREC01065 2 (+.054) 14 (+.125) 33.5215
ALREC00902 0.75 (+-.010) 7.5 (+-.062) 6.615 ALREC01002 1.25 (+.014-0) 1.75 (+.014-0) 2.597 ALREC00251 1.5 (+-.024) 10 (+-.074) 17.64 ALREC01125 2.25 (+.024-0) 2.75 (+.024-0) 7.3472
ALREC00199 0.75 (+-.010) 8 (+-.054) 7.056 ALREC00855 1.25 (+-.012) 2 (+-.024) 2.94 ALREC01034 1.5 (+.038-0) 10 (+.148-0) 17.995 ALREC00420 2.25 (+-.024) 3 (+-.024) 7.938
ALREC01022 0.75 (+.030-0) 8 (+.108-0) 7.245 ALREC00974 1.25 (+.012-0) 2 (+.024-0) 2.972 ALREC00599 1.5 (+-.024) 11 (+-.074) 19.404 ALREC00180 2.25 (+-.024) 3.5 (+-.024) 9.261
ALREC00623 0.75 (+-.01) 8.5 (+-.054) 7.498 ALREC00250 1.25 (+-.012) 2.25 (+-.024) 3.3075 ALREC00846 1.5 (+-.024) 12 (+-.084) 21.168 ALREC00025 2.25 (+-.024) 4 (+-.034) 10.584
ALREC00946 0.75 (+-.010) 9 (+-.054) 7.938 ALREC00316 1.25 (+-.012) 2.5 (+-.024) 3.675 ALREC01035 1.5 (+.038-0) 12 (+.168-0) 21.587 ALREC01068 2.25 (+.024-0) 4 (+.034-0) 10.6857
ALREC00888 0.75 (+-.018) 10 (+-.074) 8.82 ALREC00969 1.25 (+.012-0) 2.5 (+.024-0) 3.71 ALREC00891 1.5 (+-.024) 14 (+-.094) 24.696 ALREC00355 2.25 (+-.024) 4.75 (+-.034) 12.5685
ALREC01023 0.75 (+.030-0) 10 (+.148-0) 9.063 ALREC00234 1.25 (+-.012) 3 (+-.024) 4.41 ALREC01036 1.5 (+.038-0) 14 (+.188-0) 25.177 ALREC01079 2.25 (+-.024) 5 (+-.034) 13.23
ALREC00830 0.75 (+-.018) 12 (+-.084) 10.584 ALREC00970 1.25 (+.012-0) 3 (+.024-0) 4.4489 ALREC00187 1.75 (+-.014) 2 (+-.024) 4.116 ALREC01042 2.25 (+.054-0) 8 (+.108-0) 21.567
ALREC01024 0.75 (+.030-0) 12 (+.168-0) 10.871 ALREC00991 1.25 (+-.012) 3.25 (+-.024) 4.777 ALREC01004 1.75 (+.014-0) 2 (+.024-0) 4.157 ALREC00540 2.5 (+.024-0) 3 (+.024-0) 8.897
ALREC00835 0.75 (+-.017) 14 (+-.094) 12.348 ALREC00026 1.25 (+-.012) 3.5 (+-.024) 5.145 ALREC00524 1.75 (+-.014) 2.5 (+-.024) 5.145 ALREC00795 2.5 (+-.024) 3 (+-.024) 8.82
ALREC01025 0.75 (+.030-0) 14 (+.188-0) 112.68 ALREC00600 1.25 (+.012-0) 3.5 (+.024-0) 5.1874 ALREC01074 1.75 (+.014-0) 2.5 (+.024-0) 5.1904 ALREC00951 2.5 (+.024-0) 3.25 (+.024-0) 9.6363
ALREC00264 0.875 (+-.010) 1 (+-.012) 1.029 ALREC00298 1.25 (+-.012) 3.75 (+-.024) 5.5125 ALREC00847 1.75 (+-.014) 3 (+-.024) 6.174 ALREC00186 2.5 (+-.024) 3.5 (+-.024) 10.29
ALREC00871 0.875 (+-.010) 1.5 (+-.014) 1.5435 ALREC00347 1.25 (+.014-0) 3.75 (+.024-0) 5.5611 ALREC01051 1.75 (+.014-0) 3 (+.024-0) 6.2235 ALREC00952 2.5 (+.024-0) 3.5 (+.024-0) 10.374
ALREC00311 0.875 (+-.010) 2 (+-.024) 2.058 ALREC00198 1.25 (+-.012) 4 (+-.034) 5.88 ALREC00221 1.75 (+-.014) 3.5 (+-.024) 7.203 ALREC00836 2.5 (+-.024) 4 (+-.034) 11.76
ALREC00672 0.875 (+-.010) 3.25 (+-.024) 3.3443 ALREC00162 1.25 (+-.012) 4.5 (+-.034) 6.615 ALREC00262 1.75 (+-.014) 3.75 (+-.024) 7.7175 ALREC00953 2.5 (+.024-0) 4 (+.034-0) 11.8519
ALREC00291 1 (+-.012) 1.25 (+-.012) 1.47 ALREC00495 1.25 (+.014-0) 4.5 (+.034-0) 6.6772 ALREC00408 1.75 (+.014-0) 3.75 (+.034-0) 7.7835 ALREC00215 2.5 (+-.024) 4.5 (+-.034) 13.23
ALREC00287 1 (+-.012) 1.5 (+-.014) 1.764

* Not available in East Region, use Manifold Quality stock instead, see page 22. Continued next page. * Not available in East Region, use Manifold Quality stock instead, see page 22. Continued next page.
† Flatness better than one-quarter commercial standards. Surface finish better than commercial standards. † Flatness better than one-quarter commercial standards. Surface finish better than
commercial standards.
23 For more information call (800) 926-260024

6061-T6511 Rectangular Aluminum Bar 6101-T61 Rectangular Full Round Edge 6101-T65 Rectangular Full Round Edge
cont. Aluminum Bus Bar Aluminum Bus Bar
Extruded – 12 Foot Mill Lengths Extruded – 12 Foot Mill Lengths Extruded – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 211 ASTM B 317 ASTM B 317

Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds
CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALREC00679 2.5 (+.024-0) 4.5 (+.034-0) 13.3437 ALREC00506 4 (+.034-0) 8 (+.054-0) 37.919 ALREC00617 0.125 (±.007) 0.75 (±.010) 0.1091 ALREC00463 0.125 (±.007) 1.5 (±.014) 0.2183
ALREC00204 2.5 (+-.024) 5 (+-.034) 14.7 ALREC00958 4 (+.034-0) 8 (+.044-0) 37.8959 ALREC00945 0.125 (±.007) 4 (±.034) 0.582 ALREC00532 0.125 (±.007) 1 (±.012) 0.1455
ALREC00753 2.5 (+.024-0) 5 (+.034-0) 14.82 ALREC00453 4 (+-.044) 14 (+-.094) 65.856 ALREC01105 0.125 (±.007) 0.75 (±.010) 0.1091 ALREC00002 0.25 (±.008) 4 (±.034) 1.15
ALREC00554 2.5 (+-.024) 5.5 (+-.034) 16.17 ALREC01048 4 (+.130-0) 14 (+.188-0) 67.375 ALREC00707 0.1875 1 0.2183 ALREC00046 0.25 (±.008) 4 (±.034) 1.164
ALREC01049 2.5 (+.024-0) 5.5 (+.034-0) 16.297 ALREC00987 4.25 (+.064-0) 6.25 (+.044-0) 31.8535 ALREC00004 0.25 (±.008) 1.5 (±.014) 0.4365 ALREC00056 0.25 (±.008) 3 (±.024) 0.873
ALREC00299 2.5 (+-.024) 6 (+-.044) 17.64 ALREC00660 4.25 (+.108) 8.25 (+.108-0) 41.835 ALREC00016 0.25 (±.008) 1.25 (±.012) 0.3638 ALREC00152 0.25 (±.008) 3 (±.024) 0.8791
ALREC00964 2.5 (+.024-0) 6 (+.044-0) 17.789 ALREC00364 4.5 (+.034-0) 5 (+.034-0) 26.6503 ALREC00044 0.25 (±.008) 0.75 (±.010) 0.2183 ALREC00167 0.25 (±.008) 1.5 (±.014) 0.4345
ALREC01064 2.5 (+-.024) 7 (+-.044) 20.58 ALREC00942 4.5 (+-.034) 5 (+-.034) 26.46 ALREC00073 0.25 (±.008) 1.5 (±.014) 0.4365 ALREC00352 0.25 5.25 1.5278
ALREC00216 2.5 (+-.024) 8 (+-.054) 23.52 ALREC00450 4.5 (+.034-0) 5.5 (+.034-0) 29.3063 ALREC00080 0.25 (±.008) 2 (±.024) 0.582 ALREC00353 0.25 3.75 1.0912
ALREC00678 2.5 (+.024-0) 8 (+.054-0) 23.7127 ALREC00449 4.5 (+.034-0) 6 (+.044-0) 31.988 ALREC00168 0.25 (±.008) 6 (±.044) 1.746 ALREC00369 0.25 (±.008) 1 (±.012) 0.291
ALREC01043 2.5 (+.074-0) 8 (+.108-0) 24.149 ALREC00956 4.5 (+-.034) 6 (+-.044) 31.752 ALREC00217 0.25 (±.008) 0.75 (±.010) 0.2183 ALREC00446 0.25 (±.008) 1.5 (±.014) 0.4365
ALREC00983 2.5 (+-.034) 10 (+-.074) 29.4 ALREC01130 4.5 (+-.034) 6.5 (+-.044) 34.398 ALREC00226 0.25 (±.008) 4 (±.034) 1.164 ALREC00742 0.25 (±.008) 1.25 (±.012) 0.3638
ALREC00070 3 (+.024-0) 3.5 (+.024-0) 12.44 ALREC01084 4.5 (+.034-0) 7.5 (+.044-0) 36.69 ALREC00307 0.25 (±.008) 2 (±.024) 0.582 ALREC00786 0.25 (±.008) 2 (±.024) 0.5833
ALREC00207 3 (+-.024) 3.5 (+-.024) 12.348 ALREC00367 4.75 (+-.034) 5.5 (+-.034) 30.723 ALREC00323 0.25 (±.008) 2.5 (±.024) 0.7275 ALREC00792 0.25 (±.008) 6 (±.044) 1.746
ALREC00301 3 (+.024-0) 4 (+.034-0) 14.23 ALREC00669 5 (+.034-0) 5.5 (+.034-0) 32.55 ALREC00324 0.25 (±.008) 4 (±.034) 1.164 ALREC00810 0.25 (±.008) 6 (±.044) 1.75
ALREC00820 3 (+-.024) 4 (+-.034) 14.112 ALREC00851 5 (+-.034) 5.5 (+-.034) 32.34 ALREC00325 0.25 (±.008) 6 (±.044) 1.746 ALREC00840 0.25 (±.008) 5 (±.034) 1.4285
ALREC00601 3 (+.024-0) 4.25 (+.034-0) 15.1142 ALREC00076 5 (+-.034) 6 (+.044-0) 36 ALREC00331 0.25 (±.008) 3 (±.024) 0.8574 ALREC00858 0.25 5.25 1.5278
ALREC00497 3 (+.024-0) 4.5 (+.034-0) 15.982 ALREC00392 5 (+.034-0) 6 (+.044-0) 35.53 ALREC00366 0.25 (±.008) 5 (±.034) 1.455 ALREC00886 0.25 (±.008) 2 (±.024) 0.582
ALREC00759 3 (+-.024) 4.5 (+-.034) 16.2 ALREC00028 5 (+.034-0) 7 (+.044-0) 41.429 ALREC00711 0.25 (±.008) 1 (±.012) 0.291 ALREC00938 0.25 5 1.455
ALREC00387 3 (+.024-0) 5 (+.034-0) 17.77 ALREC00322 5 (+-.034) 7 (+-.044) 41.16 ALREC00785 0.25 (±.008) 1 (±.012) 0.291 ALREC00939 0.25 1 0.291
ALREC00834 3 (+-.024) 5 (+-.034) 17.64 ALREC00027 5 (+.060-0) 8 (+.072-0) 47.535 ALREC00825 0.25 (±.008) 5 (±.034) 1.455
ALREC00265 3 (+-.024) 5.5 (+-.034) 19.404 ALREC00410 5 (+.034-0) 8 (+.054-0) 47.359 *Tinned
ALREC00832 0.25 (±.008) 2.5 (±.024) 0.7275
ALREC00245 3 (+-.024) 6 (+-.044) 21.168 ALREC01092 5.5 (+.034-0) 6 (+.044-0) 37.0707 ALREC00842 0.25 (±.008) 3 (±.024) 0.873
ALREC00343 3 (+.024-0) 6 (+.044-0) 21.331 ALREC00557 6 (+-.044) 6.5 (+-.044) 45.864 ALREC01122 0.25 (±008) 1.25 (±.012) 0.3638
ALREC00574 3 (+-.024) 7 (+-.044) 24.696 ALREC00954 6 (+.044-0) 6.5 (+.044-0) 46.187 ALREC01123 0.25 7 2.0214
ALREC00454 3 (+-.024) 8 (+-.054) 28.224 ALREC00416 6 (+.044-0) 7 (+.044-0) 49.728 ALREC01124 0.25 7 2.0214
ALREC00898 3 (+.024-0) 8 (+.054-0) 28.4325 ALREC00691 6 (+.054-0) 8 (+.064-0) 56.9288 ALREC01126 0.25 (±.008) 3.25 (±.024) 0.9458
ALREC01044 3 (+.074-0) 8 (+.108-0) 28.7 ALREC01128 0.25 (±.008) 4.5 (±.034) 1.2939
ALREC00654 3 (+-.034) 10 (+-.074) 35.28 ALREC00169 0.375 (±.008) 5 (±.034) 2.1825
ALREC01045 3 (+.074-0) 10 (+.148-0) 35.979 ALREC00332 0.375 (±.008) 4 (±.034) 1.746
ALREC00418 3 (+-.034) 14 (+-.094) 49.392 ALREC00333 0.375 (±.008) 1.5 (±.014) 0.6548
ALREC01046 3 (+.074-0) 14 (+.188-0) 51.075 ALREC00337 0.375 (±.008) 3 (±.024) 1.3095
ALREC00043 3.25 (+.024-0) 4.25 (+.034-0) 16.2435 ALREC00339 0.375 (±.008) 2 (±.024) 0.873
ALREC00134 3.25 (+-.024) 5.5 (+-.034) 21.021 ALREC00584 0.375 (±.008) 5 (±.034) 2.1825
ALREC00612 3.25 (+-.024) 6.5 (+-.034) 24.843 ALREC00712 0.375 (±.008) 6 (±.044) 2.619
ALREC00344 3.5 (+.024-0) 4 (+.034-0) 16.5907 ALREC00722 0.375 (±.008) 2 (±.024) 0.873
ALREC00782 3.5 (+-.024) 4 (+-.034) 16.464 ALREC00730 0.375 (±.008) 6 (±.044) 2.619
ALREC00348 3.5 (+.024-0) 4.5 (+.034-0) 18.655 ALREC00864 0.375 (±.008) 4 (±.034) 1.746
ALREC00802 3.5 (+-.024) 4.5 (+-.034) 18.522 ALREC01103 0.375 (±.008) 1 (±.012) 0.4365
ALREC00235 3.5 (+-.024) 5 (+-.024) 20.58 ALREC00042 0.5 (±.009) 6 (±.044) 3.492
ALREC00764 3.5 (+.024-0) 5 (+.034-0) 20.721 ALREC00072 0.5 (±.009) 2 (±.024) 1.164
ALREC00597 3.5 (+-.024) 5.5 (+-.034) 22.638 ALREC00078 0.5 4 2.328
ALREC00119 3.5 (+-.024) 6 (+-.044) 24.696 ALREC00081 0.5 (±.009) 4 (±.034) 2.328
ALREC01091 3.5 (+.024-0) 6 (+.044-0) 24.871 ALREC00269 0.5 (±.009) 4 (±.034) 2.328
ALREC00163 3.5 (+-.024) 8 (+-.054) 32.928 ALREC00380 0.5 (±.009) 3 (±.024) 1.746
ALREC01047 3.5 (+.100-0) 8 (+.108-0) 33.624 ALREC00585 0.5 (±.009) 5 (±.034) 2.91
ALREC01083 3.5 (+.100-0) 12 (+.168-0) 50.448 ALREC00624 0.5 (±.009) 6 (±.044) 3.492
ALREC00010 3.75 (+.048-0) 4.25 (+.068-0) 18.7425 ALREC00696 0.5 (±.009) 5 (±.034) 2.91
ALREC00936 3.75 (+-.024) 9 (+-.034) 39.69 ALREC01094 0.5 (±.009) 8 (±.054) 4.704
ALREC00456 4 (+.034-0) 4.5 (+.034-0) 21.337 ALREC00338 0.75 (±.010) 4 (±.034) 3.492
ALREC00760 4 (+-.034) 4.5 (+-.034) 21.6 ALREC00283 1 (±.012) 4 (±.034) 4.656
ALREC00205 4 (+-.034) 5 (+-.034) 23.52 ALREC00758 1 (±.012) 5 (±.034) 5.82
ALREC00346 4 (+.034-0) 5 (+.034-0) 23.7003
*Alstan 80 Plated
ALREC00977 4 (+-.030) 5.5 (+-.030) 25.872
ALREC00039 4 (+-.034) 6 (+-.044) 28.2241
ALREC00222 4 (+.034-0) 6 (+.044-0) 28.447
ALREC00677 4 (+.034-0) 7 (+.044-0) 33.1719
25 For more information call (800) 926-260026

6061-T6511 Rectangular Aluminum Bar Manifold Quality 6063-T52 Rectangular Aluminum Bar 7075-T651 Rectangular Aluminum Bar
Extruded – 12 Foot Mill Lengths Extruded – 16 Foot Mill Lengths Cold Finished – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 211 AMS-QQ-A-200, ASTM B 211 AMS 4123, AMS-QQ-A-225, ASTM B 211

Manifold quality bar features elevated mechanical properties along with tolerances for twist, straightness, and dimension that are one-half that of standard commercial bar. Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds
Additionally, all dimensional tolerances are on the plus side. CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALREC00077 0.125 (±.007) 1 (±.012) 0.1455 ALREC00065 0.5 (±.002) 1 (±.0025) 0.606
Thickness Thickness Width Width Pounds Thickness Thickness Width Width Pounds
CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot ALREC00079 0.125 (±.007) 1.5 (±.014) 0.2183 ALREC00776 0.5 (±.002) 2.5 1.515
ALREC00964 2.5 (+.024-0) 6 (+.044-0) 17.789 ALREC00285 0.125 (±.007) 0.5 (±.009) 0.0728 ALREC00876 0.5 (±.002) 2 (±.003) 1.212
ALREC00429 1 (+.012-0) 3 (+.024-0) 3.563
ALREC01049 2.5 (+.024-0) 5.5 (+.034-0) 16.297 ALREC00326 0.125 (±.007) 4 (±.034) 0.582 ALREC00622 0.75 (±.0025) 2.5 2.2725
ALREC00438 1 (+.012-0) 2.5 (+.024-0) 2.9748
ALREC00070 3 (+.024-0) 3.5 (+.024-0) 12.44 ALREC00813 0.125 (±.007) 0.75 (±.010) 0.1091 ALREC00838 0.75 (±.0025) 2 (±.003) 1.818
ALREC00708 1 (+.012-0) 3.5 (+.024-0) 4.1478
ALREC00301 3 (+.024-0) 4 (+.034-0) 14.23 ALREC00880 0.75 (±.0025) 1.5 (±.003) 1.3635
ALREC00775 1 (+.012-0) 2 (+.024-0) 2.38 ALREC00867 0.125 (±.007) 2.5 (±.024) 0.3638
ALREC00343 3 (+.024-0) 6 (+.044-0) 21.331 ALREC00129 1 (±.0025) 1.75 2.121
ALREC00984 1 (+.012-0) 4 (+.034-0) 4.7523 ALREC00896 0.125 (±.007) 2 (±.024) 0.291
ALREC00387 3 (+.024-0) 5 (+.034-0) 17.77 ALREC00138 1 (±.0025) 1.5 (±.003) 1.818
ALREC00998 1 (+.012-0) 5 (+.034-0) 5.936 ALREC01102 0.125 (±.007) 1.75 (±.024) 0.2573
ALREC00497 3 (+.024-0) 4.5 (+.034-0) 15.982 ALREC00385 1 (±.0025) 1.25 (±.003) 1.515
ALREC00999 1 (+.012-0) 1.5 (+.014-0) 1.7846 ALREC00498 0.187 1.25 0.2721
ALREC00898 3 (+.024-0) 8 (+.054-0) 28.4325 ALREC00525 1 (±.0025) 2 (±.005) 2.424
ALREC01000 1 (+.012-0) 1.75 (+.024-0) 2.0845
ALREC00060 0.1875 (±.007) 0.75 (±.010) 0.1637 ALREC00805 1.25 (±.003) 3 (±.008) 4.545
ALREC01001 1 (+.012-0) 4.5 (+.034-0) 5.3439 ALREC00344 3.5 (+.024-0) 4 (+.034-0) 16.5907
ALREC00183 0.1875 (±.007) 1.25 (±.012) 0.2728 ALREC00061 1.5 (±.003) 4 (±.010) 7.272
ALREC00393 1.125 (+.012-0) 2.5 (+.024-0) 3.341 ALREC00348 3.5 (+.024-0) 4.5 (+.034-0) 18.655
ALREC00764 3.5 (+.024-0) 5 (+.034-0) 20.721 ALREC00327 0.1875 (±.007) 1 (±.012) 0.2183 ALREC00257 1.5 (±.003) 3 (±.008) 5.454
ALREC01077 1.125 (+.012-0) 2 (+.024-0) 2.6903
ALREC01091 3.5 (+.024-0) 6 (+.044-0) 24.8715 ALREC00336 0.1875 (±.007) 1.5 (±.014) 0.3274 ALREC00784 1.5 (±.003) 2.5 (±.008) 4.545
ALREC00347 1.25 (+.014-0) 3.75 (+.024-0) 5.5611
ALREC00222 4 (+.034-0) 6 (+.044-0) 28.447 ALREC00837 0.1875 (±.007) 2 (±.024) 0.4365 ALREC00066 2 (±.005) 3 (±.008) 7.272
ALREC00495 1.25 (+.014-0) 4.5 (+.034-0) 6.6772
ALREC00346 4 (+.034-0) 5 (+.034-0) 23.7003 ALREC00120 0.25 (±.008) 4 (±.034) 1.164 ALREC00128 2.5 (±.008) 4 (±.010) 12.12
ALREC00600 1.25 (+.012-0) 3.5 (+.024-0) 5.1874
ALREC00670 1.25 (+.014-0) 5 (+.034-0) 7.4163 ALREC00456 4 (+.034-0) 4.5 (+.034-0) 21.337 ALREC00121 0.25 1.25 0.3638
ALREC00791 1.25 (+.014-0) 5.5 (+.034-0) 8.1554 ALREC00506 4 (+.034-0) 8 (+.054-0) 37.919 ALREC00122 0.25 (±.008) 2 (±.024) 0.582
ALREC00969 1.25 (+.012-0) 2.5 (+.024-0) 3.71 ALREC00677 4 (+.034-0) 7 (+.044-0) 33.1719 ALREC00196 0.25 (±.008) 0.75 (±.010) 0.2183
ALREC00970 1.25 (+.012-0) 3 (+.024-0) 4.44 ALREC00987 4.25 (+.064-0) 6.25 (+.044-0) 31.5835 ALREC00213 0.25 (±.008) 0.625 (±.009) 0.1819
7075-T6511 Rectangular Aluminum Bar
ALREC00974 1.25 (+.012-0) 2 (+.024-0) 2.972 ALREC00364 4.5 (+.034-0) 5 (+.034-0) 26.6503 Extruded – 12 Foot Mill Lengths
ALREC00668 0.25 (±.008) 2.25 (±.024) 0.6548
ALREC01002 1.25 (+.014-0) 1.75 (+.014-0) 2.597 ALREC00449 4.5 (+.034-0) 6 (+.044-0) 31.988 AMS-QQ-A-200, ASTM B 221
ALREC00728 0.25 (±.008) 3 (±.024) 0.873
ALREC01063 1.25 (+.012-0) 6 (+.044-0) 8.8948 ALREC00450 4.5 (+.034-0) 5.5 (+.034-0) 29.3063
ALREC00826 0.25 (±.008) 1 (±.012) 0.2912
ALREC00342 1.5 (+.014-0) 8.5 (+.054-0) 15.0764 ALREC00028 5 (+.034-0) 7 (+.044-0) 41.429 Thickness Thickness Width Width Pounds
ALREC00866 0.25 (±.008) 1.5 (±.014) 0.4365
ALREC00372 1.5 (+.014-0) 6.5 (+.044-0) 11.558 ALREC00392 5 (+.034-0) 6 (+.044-0) 35.53 CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALREC00399 1.5 (+.014-0) 4.5 (+.034-0) 8.005 ALREC00410 5 (+.034-0) 8 (+.054-0) 47.3592 ALREC00887 0.25 (±.008) 1.25 (±.012) 0.3638
ALREC00490 0.5 2 1.212
ALREC00415 1.5 (+.014-0) 2 (+.024-0) 3.566 ALREC00669 5 (+.034-0) 5.5 (+.034-0) 32.55 ALREC00085 0.375 (±.008) 1 (±.012) 0.4365 ALREC00934 0.75 (±.010) 1 (±.012) 0.909
ALREC00448 1.5 (+.014-0) 6 (+.044-0) 10.6724 ALREC01092 5.5 (+.034-0) 6 (+.044-0) 39.0707 ALREC00797 0.375 (±.008) 1.25 (±.012) 0.5456 ALREC01071 1.75 4 8.484
ALREC00457 1.5 (+.014-0) 3 (+.024-0) 5.3628 ALREC00416 6 (+.044-0) 7 (+.044-0) 49.728 ALREC00814 0.375 (±.008) 2 (±.024) 0.873 ALREC01076 1.75 4.5 9.5445
ALREC00509 1.5 (+.014-0) 2.5 (+.024-0) 4.443 ALREC00691 6 (+.054-0) 8 (+.064-0) 56.9288 ALREC00827 0.375 (±.008) 1.5 (±.014) 0.6548 ALREC00094 2 6 14.544
ALREC00517 1.5 (+.014-0) 4 (+.034-0) 7.119 ALREC00954 6 (+.044-0) 6.5 (+.044-0) 46.187 ALREC00031 0.5 (±.009) 2 (±.024) 1.164 ALREC00433 3.625 4.625 20.3199
ALREC00539 1.5 (+.014-0) 5.5 (+.044-0) 9.7863 ALREC00143 0.5 (±.009) 1 (±.012) 0.582 ALREC00422 3.75 6.5 29.5425
ALREC01003 1.5 (+.014-0) 5 (+.034-0) 8.8913 ALREC00212 0.5 (±.009) 3 (±.024) 1.746 ALREC00568 4 7 33.936
ALREC00345 1.75 (+.014-0) 4.5 (+.034-0) 9.3332 ALREC00752 4 5 24.24
ALREC00223 0.5 (±.009) 4 (±.034) 2.328
ALREC00362 1.75 (+.014-0) 5.5 (+.034-0) 11.3994
ALREC00798 0.5 (±.009) 1.5 (±.014) 0.873
ALREC00408 1.75 (+.014-0) 3.75 (+.034-0) 7.7835
ALREC00159 0.75 (±.010) 4 (±.034) 3.492
ALREC01004 1.75 (+.014-0) 2 (+.024-0) 4.157
ALREC01051 1.75 (+.014-0) 3 (+.024-0) 6.2235 ALREC00816 1 (±.012) 2 (±.024) 2.328
ALREC01074 1.75 (+.014-0) 2.5 (+.024-0) 5.1904
ALREC00363 2 (+.024-0) 2.5 (+.024-0) 5.9437
ALREC00400 2 (+.024-0) 6.5 (+.044-0) 15.432
ALREC00413 2 (+.024-0) 3 (+.024-0) 7.127 7075-T7351 Rectangular Aluminum Bar
ALREC00414 2 (+.024-0) 4 (+.034-0) 9.505 Cold Finished – 12 Foot Mill Lengths
ALREC00428 2 (+.024-0) 5 (+.034-0) 11.871 AMS-QQ-A-225
ALREC00496 2 (+.024-0) 8.5 (+.054-0) 20.175
ALREC00681 2 (+.024-0) 3.5 (+.024-0) 8.3098 Thickness Thickness Width Width Pounds
ALREC00971 2 (+.024-0) 4.5 (+.034-0) 10.687 CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALREC00972 2 (+.024-0) 6 (+.044-0) 14.2487 ALREC01057 0.5 (±.002) 1.25 (±.003) 0.7575
ALREC01068 2.25 (+.024-0) 4 (+.034-0) 10.6857 ALREC00018 1 (±.0025) 2 (±.005) 2.424
ALREC01125 2.25 (+.024-0) 2.75 (+.024-0) 7.3472 ALREC00657 1.5 (±.003) 4 (±.034) 7.272
ALREC00540 2.5 (+.024-0) 3 (+.024-0) 8.8978 ALREC00371 2 3 7.27
ALREC00678 2.5 (+.024-0) 8 (+.054-0) 23.7127 ALREC00089 3 (±.008) 6 (±.030) 21.816
ALREC00679 2.5 (+.024-0) 4.5 (+.034-0) 13.3437 ALREC00650 3 4.5 16.362
ALREC00753 2.5 (+.024-0) 5 (+.034-0) 14.82
ALREC00951 2.5 (+.024-0) 3.25 (+.024-0) 9.6363
ALREC00952 2.5 (+.024-0) 3.5 (+.024-0) 10.374
ALREC00953 2.5 (+.024-0) 4 (+.034-0) 11.8519
27 For more information call (800) 926-260028

Hexagon Bar 6061-T6 Hexagon Aluminum Bar

Extruded – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 221
6262-T6511 Hexagon Aluminum Bar
Extruded – 12 Foot Mill Lengths
ASTM B 221

Size Size Pounds Size Size Pounds

2011-T3 Hexagon Aluminum Bar 2024-T351 Hexagon Aluminum Bar CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot
Cold Finished – 12 Foot Mill Lengths Cold Finished – 12 Foot Mill Lengths ALHEX00103 0.375 (±.008) 0.1433 ALHEX00234 0.4375 0.1951
ASTM B 211, ROHS Compliant AMS 4120, AMS-QQ-A-225, ASTM B 211 ALHEX00003 0.9375 (±.010) 0.8958 ALHEX00004 0.625 (±.005) 0.3981
ALHEX00272 0.6875 (±.005) 0.4817
Size Size Pounds Size Size Pounds ALHEX00233 0.75 (±.005) 0.5733
CBS Part No. (Inches) Tolerance Per Foot CBS Part No. (Inches) Tolerance Per Foot ALHEX00221 0.875 (±.005) 0.7803
ALHEX00187 0.1875 (±.002) 0.0373 ALHEX00058 0.5625 (±.0025) 0.3324 ALHEX00052 1 (±.006) 1.0192
ALHEX00057 0.25 (±.002) 0.0663 ALHEX00207 0.625 (±.0025) 0.4063 6061-T651 Hexagon Aluminum Bar ALHEX00142 1.125 (±.006) 1.2899
ALHEX00032 0.3125 (±.002) 0.1036 ALHEX00208 0.6875 (±.0025) 0.4965 ALHEX00209 1.5 (±.007) 2.2932
Cold Finished – 12 Foot Mill Lengths
ALHEX00284 0.3125 (±.002) 0.1036 ALHEX00036 0.75 (±.0025) 0.5909 AMS 4117, AMS-QQ-A-225, ASTM B 211 ALHEX00027 1.625 (±.007) 2.6913
ALHEX00134 0.375 (±.002) 0.1492 ALHEX00231 0.8125 (±.0025) 0.6934 ALHEX00224 1.75 3.12
ALHEX00285 0.375 (±.002) 0.1492 ALHEX00232 0.875 (±.0025) 0.8042 ALHEX00283 2.5 (±.012) 6.37
Size Size Pounds
ALHEX00034 0.4375 (±.002) 0.203 ALHEX00039 1 (±.0025) 1.0504 CBS Part No. (Inches) Tolerance Per Foot *14 Foot Lengths
ALHEX00035 0.5 (±.002) 0.2652 ALHEX00037 1.125 (±.003) 1.3294 ALHEX00166 0.75 (±.0025) 0.5733
ALHEX00192 0.5625 (±.0025) 0.3356 ALHEX00211 1.1875 (±.003) 1.4666

I Beam
ALHEX00102 0.8125 (±.0025) 0.6728
ALHEX00286 0.5625 (±.0025) 0.3356 ALHEX00040 1.25 (±.003) 1.6413 ALHEX00178 1.0625 (±.003) 1.1506
ALHEX00230 0.625 (±.0025) 0.4144 ALHEX00038 1.375 (±.003) 1.9859 ALHEX00101 1.25 (±.003) 1.5925
ALHEX00217 0.6875 (±.0025) 0.5014 ALHEX00119 1.4375 (±.003) 2.1491 ALHEX00205 1.3125 (±.003) 1.7557
ALHEX00017 0.75 (±.0025) 0.5967 ALHEX00028 1.5 (±.003) 2.3634 ALHEX00135 1.375 (±.003) 1.9269
ALHEX00162 0.875 (±.0025) 0.8122 ALHEX00137 1.625 (±.005) 2.7463 ALHEX00061 1.5625 (±.005) 2.4883
ALHEX00047 0.9375 (±.0025) 0.9323 ALHEX00065 1.6875 (±.005) 2.9616 ALHEX00186 2 (±.005) 4.0768
ALHEX00193 1 (±.0025) 1.0608 ALHEX00081 1.8125 (±.005) 3.4166 ALHEX00291 2.625 7.0229 6061-T6 Aluminum I Beam
ALHEX00090 1.125 (±.003) 1.3426 ALHEX00053 1.875 (±.005) 3.6928
Extruded, American Standard
ALHEX00287 1.125 (±.003) 1.3426 ALHEX00054 2 (±.005) 4.2016 25 Foot Mill Lengths
ALHEX00023 1.25 (±.003) 1.6575 ALHEX00016 2.25 5.265 ASTM B 221
ALHEX00074 1.375 (±.003) 2.0056 ALHEX00104 2.4375 6.1791
ALHEX00288 1.375 (±.003) 2.0056
6061-T6511 Hexagon Aluminum Bar Side B Thickness Side A Pounds
ALHEX00033 1.5 (±.003) 2.3868
Extruded – 12 Foot Mill Lengths CBS Part No. (Inches) (Inches) (Inches) Per Foot
ALHEX00214 1.5 (±.003) 2.3868 AMS-QQ-A-200, ASTM B 221 ALI00023 2.33 0.17 3 1.963
ALHEX00289 1.5 (±.003) 2.3868
ALI00006 2.66 0.19 4 2.644
ALHEX00008 1.625 (±.005) 2.8012 2024-T851 Hexagon Aluminum Bar ALI00012 3 0.21 5 3.43
ALHEX00048 1.75 (±.005) 3.2487 Size Size Pounds
Cold Finished – 12 Foot Mill Lengths CBS Part No. (Inches) Tolerance Per Foot ALI00010 3.33 0.23 6 4.302
AMS 4120, AMS-QQ-A-225, ASTM B 211 ALI00004 4 0.27 8 6.348
ALHEX00273 0.4375 (±.005) 0.1951
ALHEX00031 0.5 (±.005) 0.2548 ALI00011 2.796 0.326 4 3.283
Size Size Pounds ALHEX00226 0.5625 (±.005) 0.3225 ALI00026 3.443 0.343 6 5.099
CBS Part No. (Inches) Tolerance Per Foot ALHEX00223 0.625 (±.005) 0.3981 ALI00003 2.509 0.349 3 2.591
2024-T4 Hexagon Aluminum Bar ALHEX00185 0.4375 (±.002) 0.1991 ALHEX00020 0.6875 (±.005) 0.4817 ALI00030 3.284 0.494 5 5.098
Cold Finished – 12 Foot Mill Lengths ALHEX00173 0.5 (±.002) 0.26 ALHEX00018 0.75 (±.005) 0.5733
AMS 4120, AMS-QQ-A-225, ASTM B 211 ALHEX00121 0.5625 (±.0025) 0.3291 ALHEX00043 0.875 (±.005) 0.7803
ALHEX00118 0.625 (±.0025) 0.4063 ALHEX00026 1 (±.006) 1.0192
Size Size Pounds ALHEX00010 0.6875 (±.0025) 0.4916 ALHEX00197 1.0625 (±.06) 1.1506
CBS Part No. (Inches) Tolerance Per Foot ALHEX00145 0.75 (±.0025) 0.585 ALHEX00056 1.125 (±.006) 1.2899 6061-T6 Aluminum I Beam
ALHEX00229 0.25 (±.002) 0.0657 ALHEX00105 0.8125 (±.0025) 0.6866 ALHEX00148 1.1875 (±.005) 1.4372 Extruded, Aluminum Association
ALHEX00279 0.375 (±.002) 0.1463 ALHEX00123 0.875 (±.0025) 0.7963 ALHEX00215 1.25 (±.012) 1.5925 25 Foot Mill Lengths
ALHEX00025 0.5 (±.002) 0.2626 ALHEX00106 0.9375 (±.0025) 0.9141 ALHEX00228 1.25 (±.006) 1.5925 AMS-QQ-A-200 , ASTM B 221
ALHEX00066 1 (±.0025) 1.04 ALHEX00195 1.3125 (±.005) 1.7557
ALHEX00117 1.125 (±.003) 1.3163 ALHEX00029 1.375 (±.006) 1.925 Side B Thickness Side A Pounds
ALHEX00077 1.25 (±.003) 1.625 ALHEX00042 1.5 (±.007) 2.2932 CBS Part No. (Inches) (Inches) (Inches) Per Foot
ALHEX00220 1.375 (±.003) 1.9663 ALHEX00045 1.625 (±.007) 2.688 ALI00002 4 0.23 6 4.159
ALHEX00082 2 (±.005) 4.16 ALHEX00051 1.75 (±.007) 3.1213 ALI00005 4 0.21 6 4.692
ALHEX00068 2.25 (±.008) 5.265 ALHEX00206 2 (±.008) 4.0768 ALI00020 4 0.19 6 4.03
ALHEX00181 2.8125 (±.008) 8.2266 ALHEX00049 2.25 (±.012) 5.164 ALI00009 5 0.25 8 7.023
ALHEX00225 2.5 (±.012) 6.365 ALI00021 5 0.23 8 6.181
ALHEX00088 3 (±.012) 9.1728 ALI00007 6 0.29 10 10.286
ALI00025 6 0.25 10 8.646
ALI00027 7 0.31 12 14.292
29 For more information call (800) 926-260030

Angle 6061-T6 Aluminum Angle

Extruded, American Standard
25 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 308
Channel
6061-T6 Aluminum Channel
6063-T52 Aluminum Angle Thickness Leg A Leg B Pounds Extruded, Aluminum Association 6063-T52 Aluminum Channel
Extruded, Sharp Corner CBS Part No. (Inches) (Inches) (Inches) Per Foot 25 Foot Mill Lengths Extruded — 16 Foot Mill Lengths
16 Foot Mill Lengths ALANG00121 0.125 0.75 0.75 0.201 ASTM B 221, ASTM B 308 ASTM B 221
ASTM B 221 ALANG00089 0.125 1 1 0.275
ALANG00020 0.125 1.25 1.25 0.343
Leg A Thickness Leg B Pounds Leg A Thickness Leg B Pounds
Thickness Leg A Leg B Pounds ALANG00029 0.125 1.5 1.25 0.387 CBS Part No. (Inches) (Inches) (Inches) Per Foot CBS Part No. (Inches) (Inches) (Inches) Per Foot
CBS Part No. (Inches) (Inches) (Inches) Per Foot ALANG00060 0.125 1.5 1.5 0.423
ALCHA00006 2 0.17 1.25 1.071 ALCHA00012 0.75 0.125 0.75 0.3
ALANG00037 0.0625 1.5 1.5 0.219 ALANG00011 0.125 1.75 1.75 0.497
ALCHA00013 2 0.13 1 0.557 ALCHA00031 0.75 0.125 0.375 0.187
ALANG00052 0.0625 0.75 0.75 0.108 ALANG00004 0.125 2 2 0.577
ALCHA00076 3 0.17 1.75 1.597 ALCHA00057 1 0.09 1 0.295
ALANG00110 0.0625 0.5 0.375 0.061 ALANG00113 0.125 2 1.5 0.496
ALCHA00077 3 0.13 1.5 1.136 ALCHA00064 1 0.125 0.5 0.263
ALANG00111 0.0625 0.5 0.5 0.07 ALANG00082 0.1875 1 1 0.4
ALCHA00017 4 0.15 2 1.738 ALCHA00085 1 0.125 1 0.413
ALANG00005 0.125 0.5 0.5 0.131 ALANG00016 0.1875 1.25 1.25 0.51
ALCHA00072 4 0.19 2.25 2.331 ALCHA00021 1.25 0.125 1.25 0.526
ALANG00013 0.125 0.625 0.625 0.168 ALANG00062 0.1875 1.5 1.5 0.619
ALCHA00032 5 0.19 2.75 3.089 ALCHA00062 1.25 0.125 0.75 0.374
ALANG00019 0.125 2 0.5 0.355 ALANG00038 0.1875 1.75 1.25 0.621
ALCHA00073 5 0.15 2.25 2.212 ALCHA00049 1.5 0.125 1.5 0.637
ALANG00022 0.125 1 0.75 0.244 ALANG00102 0.1875 2 2 0.85
ALCHA00033 6 0.21 3.25 4.03 ALCHA00015 1.75 0.125 1 0.524
ALANG00026 0.125 1 0.5 0.2 ALANG00109 0.1875 2 1.5 0.731
ALCHA00039 6 0.17 2.5 2.834 ALCHA00034 1.75 0.125 0.75 0.45
ALANG00028 0.125 1.75 1.75 0.506 ALANG00008 0.1875 2.5 2 0.961
ALCHA00069 7 0.17 2.75 3.205 ALCHA00045 2 0.25 2 1.667
ALANG00030 0.125 1.25 1.25 0.356 ALANG00101 0.1875 2.5 2.5 1.07
ALCHA00071 7 0.21 3.5 4.715 ALCHA00063 2 0.125 0.5 0.413
ALANG00031 0.125 2 1.5 0.506 ALANG00084 0.1875 3 3 1.275
ALCHA00014 8 0.25 3.75 5.789 ALCHA00074 2 0.125 2 0.863
ALANG00032 0.125 2.5 2.5 0.731 ALANG00122 0.1875 3 2 1.071
ALCHA00066 8 0.19 3 4.147 ALCHA00079 2 0.125 1 0.564
ALANG00045 0.125 1 1 0.281 ALANG00117 0.188 2.5 1.5 0.85
ALCHA00040 9 0.29 4 6.97 ALCHA00046 2.5 0.125 1.5 0.787
ALANG00046 0.125 1.5 1 0.356 ALANG00097 0.25 1 1 0.514
ALCHA00008 10 0.31 4.25 8.36 ALCHA00047 3 0.125 1 0.713
ALANG00051 0.125 1.5 0.75 0.319 ALANG00003 0.25 1.25 1.25 0.656
ALCHA00070 10 0.25 3.5 6.136 ALCHA00067 3 0.125 0.5 0.563
ALANG00055 0.125 4 4 1.181 ALANG00068 0.25 1.5 1.25 0.734
ALCHA00004 12 0.29 4 8.274 ALCHA00022 4 0.125 1 0.862
ALANG00056 0.125 1.5 1.5 0.431 ALANG00086 0.25 1.5 1.5 0.809
ALCHA00029 12 0.35 5 11.822
ALANG00057 0.125 4 2 0.881 ALANG00035 0.25 1.75 1.75 0.956
ALANG00061 0.125 2 2 0.581 ALANG00042 0.25 2 1.5 0.956
ALANG00080 0.125 0.75 0.5 0.169 ALANG00119 0.25 2 2 1.11
ALANG00093 0.125 0.75 0.75 0.206 ALANG00018 0.25 2.5 1.5 1.11
ALANG00104 0.125 3 3 0.881 ALANG00091 0.25 2.5 2.5 1.404 6061-T6 Aluminum Channel
ALANG00105 0.125 3 2 0.731 ALANG00107 0.25 2.5 2 1.257 Extruded, American Standard
ALANG00041 0.1875 1.25 1.25 0.519 ALANG00099 0.25 3 2 1.403 25 Foot Mill Lengths
ALANG00096 0.1875 3 3 1.308 ALANG00112 0.25 3 3 1.684 AMS-QQ-A-200, ASTM B 308
ALANG00114 0.1875 2 2 0.857 ALANG00010 0.25 3.5 3.5 2.03
ALANG00116 0.1875 1.5 1.5 0.633 ALANG00124 0.25 3.5 2.5 1.684
Leg A Thickness Leg B Pounds
ALANG00009 0.25 1.5 1.5 0.809 ALANG00058 0.25 4 4 2.283 CBS Part No. (Inches) (Inches) (Inches) Per Foot
ALANG00014 0.25 3 2 1.424 ALANG00098 0.25 4 3 1.988
ALCHA00011 3 0.258 1.498 1.729
ALANG00039 0.25 2 2 1.124 ALANG00902 0.25 4 2 1.726
ALCHA00019 3 0.17 1.41 1.417
ALANG00083 0.25 3 3 1.724 ALANG00087 0.375 2 2 1.606
ALCHA00058 3 0.356 1.596 2.074
ALANG00095 0.375 2.5 2.5 2.047
ALCHA00027 4 0.32 1.72 2.504
ALANG00040 0.375 3 2 2.046
ALCHA00042 4 0.18 1.58 1.846
ALANG00054 0.375 3 3 2.474
ALCHA00059 4 0.247 1.647 2.161
ALANG00049 0.375 3.5 3.5 2.926
ALCHA00061 5 0.325 1.885 3.108
ALANG00047 0.375 4 3 2.926
ALCHA00083 5 0.19 1.75 2.316
ALANG00100 0.375 4 4 3.366
ALCHA00005 6 0.314 2.034 3.631
ALANG00053 0.375 5 3 3.348
ALCHA00026 6 0.438 2.157 4.498
ALANG00088 0.375 5 5 4.237
ALCHA00028 6 0.225 1.945 3.002
ALANG00103 0.375 6 4 4.237
ALCHA00080 6 0.2 1.92 2.826
ALANG00106 0.375 6 6 5.119
ALCHA00053 7 0.314 2.194 4.232
ALANG00017 0.5 3 3 3.227
ALCHA00082 7 0.23 2.11 3.541
ALANG00043 0.5 4 3 3.826
ALCHA00024 8 0.488 2.527 6.484
ALANG00120 0.5 4 4 4.414
ALCHA00041 8 0.25 2.29 4.252
ALANG00025 0.5 5 3.5 4.704
ALCHA00018 10 0.526 2.886 8.641
ALANG00108 0.5 5 5 5.578
ALCHA00043 10 0.24 2.6 5.278
ALANG00034 0.5 6 6 6.754
ALCHA00003 12 0.51 3.17 10.374
ALANG00115 0.5 6 4 5.578
ALCHA00023 12 0.3 2.96 7.411
ALANG00012 0.5 8 8 9.141
ALANG00914 0.625 6 6 8.352
ALANG00118 0.75 6 6 10.038
ALANG00036 0.75 8 6 11.679
31 For more information call (800) 926-260032

Round Tube 6061-T6 Round Aluminum Tube

Extruded Drawn Seamless — 12 Foot Mill Lengths
AMS 4082, AMS-WW-T-700, ASTM B 210
6061-T6511 Round Aluminum Tube
Extruded Seamless – 12 and 24 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 241

OD Thickness Pounds OD Thickness Pounds

1100-F Round Aluminum Tube 6061-T6511 Round Aluminum Tube CBS Part No. (Inches) (Inches) Per Foot CBS Part No. (Inches) (Inches) Per Foot
Extruded Seamless — 12 Foot Mill Lengths Extruded Structural – Random Mill Lengths ALTUB00126 0.25 0.035 0.0278 ALTUB00337 1.375 0.312 1.2253
ASTM B 210 AMS-QQ-A-200, ASTM B 241 ALTUB00365 0.25 0.049 0.0364 ALTUB00011 1.5 0.25 1.1546
ALTUB00115 0.375 0.035 0.044 ALTUB00351 1.5 0.125 0.635
OD Thickness Pounds OD OD Thickness Pounds ALTUB00123 0.375 0.049 0.059 ALTUB00102 2 0.375 2.2514
CBS Part No. (Inches) (Inches) Per Foot CBS Part No. (Inches) Tolerance (Inches) Per Foot ALTUB00151 0.375 0.065 0.0744 ALTUB00354 2 0.5 2.7668
ALTUB00344 0.5 0.05 0.0831 ALTUB00263 1.156 (+.015-.01) 0.25 0.8197 ALTUB00025 0.5 0.065 0.1045 ALTUB00355 2 0.25 1.6164
ALTUB00330 1.5 0.25 1.1546 ALTUB00133 0.5 0.049 0.0816 ALTUB00401 2 0.125 0.8659
ALTUB00497 2 0.5 2.771 ALTUB00290 0.5 0.12 0.1685 ALTUB00367 2.25 0.25 1.848
ALTUB00490 2.25 (±.015) 0.25 1.8473 ALTUB00364 0.5 0.083 0.1279 ALTUB00413 2.25 0.5 3.2328
ALTUB00474 2.5 0.75 4.8492 ALTUB00402 0.5 0.035 0.0601 ALTUB00131 2.5 0.5 3.6946
ALTUB00475 2.5 0.3125 2.5256 ALTUB00009 0.625 0.035 0.0763 ALTUB00404 2.5 0.25 2.0782
2024-T3 Round Aluminum Tube ALTUB00499 2.5 0.375 2.944 ALTUB00129 0.625 0.065 0.1345 ALTUB00171 2.75 0.5 4.1564
Extruded Drawn Seamless – 12 Foot Mill Lengths ALTUB00500 2.5 0.5 3.695 ALTUB00311 0.625 0.058 0.1215 ALTUB00177 2.75 0.25 2.3091
ASTM B 210 ALTUB00511 2.75 0.75 5.541 ALTUB00017 0.75 0.065 0.1645 ALTUB00087 3 0.25 2.54
ALTUB00067 2.781 (±.031) 0.156 1.513 ALTUB00047 0.75 0.083 0.2045 ALTUB00399 3 0.5 4.6183
OD Thickness Pounds ALTUB00119 2.781 0.156 1.5129 ALTUB00060 0.75 0.125 0.2886 ALTUB00100 3.25 0.75 6.9274
CBS Part No. (Inches) (Inches) Per Foot ALTUB00358 2.781 0.156 1.513 ALTUB00255 0.75 0.035 0.0925 ALTUB00103 3.25 0.375 3.9832
ALTUB00458 0.5 0.12 0.172 ALTUB00071 3 0.375 3.6369 ALTUB00340 0.75 0.049 0.1269 ALTUB00476 3.25 0.25 2.7678
ALTUB00525 1.125 0.049 0.1988 ALTUB00224 3 0.75 6.2346 ALTUB00002 0.875 0.035 0.1086 ALTUB00353 3.5 0.5 5.5419
ALTUB00281 1.25 0.058 0.2606 ALTUB00501 3 0.5 4.618 ALTUB00020 0.875 0.058 0.1751 ALTUB00357 3.5 0.25 3.0019
ALTUB00459 1.25 0.12 0.5112 ALTUB00495 3.25 (±.015) 0.5 5.0801 ALTUB00101 0.875 0.065 0.1945 ALTUB00371 3.75 1 10.1602
ALTUB00078 3.5 0.375 4.3296 ALTUB00018 1 0.035 0.1248 ALTUB00001 4 0.5 6.4656
ALTUB00107 3.5 0.75 7.6201 ALTUB00029 1 0.125 0.4041 ALTUB00035 4 0.25 3.4637
ALTUB00502 3.5 0.125 1.558 ALTUB00059 1 0.065 0.2245 ALTUB00147 4 1 11.0838
ALTUB00487 3.75 0.75 8.3129 ALTUB00086 1 0.058 0.2018 ALTUB00393 4 0.75 9.0056
ALTUB00494 4 (±.025) 0.5 6.4656 ALTUB00197 1 0.12 0.398 ALTUB00088 4.187 0.906 10.9825
3003-H14 Round Aluminum Tube ALTUB00503 4 0.375 5.022 ALTUB00378 1 0.083 0.2812 ALTUB00061 4.5 0.25 3.9255
Extruded Drawn – 12 Foot Mill Lengths ALTUB00504 4.25 0.5 6.927 ALTUB00387 1 0.049 0.1722 ALTUB00144 4.5 1 12.9311
ASTM B 210, ASTM B 483 ALTUB00505 4.75 0.5 7.85 ALTUB00130 1.125 0.058 0.2286 ALTUB00315 4.5 0.5 7.3892
ALTUB00155 5.5 0.75 13.162 ALTUB00256 1.125 0.049 0.1948 ALTUB00317 4.5 0.75 10.3911
ALTUB00506 5.5 0.25 4.849 ALTUB00021 1.25 0.065 0.2846 ALTUB00049 5 0.25 4.3873
OD Thickness Pounds
CBS Part No. (Inches) (Inches) Per Foot ALTUB00507 6 0.375 7.793 ALTUB00140 1.25 0.083 0.3579 ALTUB00309 5 0.75 11.7765
ALTUB00510 6 0.5 7.158 ALTUB00250 1.25 0.058 0.2554 ALTUB00407 5 0.5 8.3129
ALTUB00005 0.25 0.035 0.0281
ALTUB00508 6.5 0.5 11.084 ALTUB00518 1.25 0.035 0.1571 ALTUB00013 5.5 1 16.6257
ALTUB00488 0.4375 0.035 0.0526
ALTUB00509 7 0.5 12.007 ALTUB00012 1.5 0.049 0.2627 ALTUB00016 6 0.75 14.5475
ALTUB00496 8 (±.045) 0.5 13.8548 ALTUB00084 1.5 0.125 0.635 ALTUB00095 6 0.25 5.311
ALTUB00381 1.5 0.065 0.3446 ALTUB00104 6 0.5 10.1602
ALTUB00146 1.75 0.065 0.4047 ALTUB00215 6 1.25 21.9367
ALTUB00251 1.875 0.058 0.389 ALTUB00361 6 1 18.473
ALTUB00332 2 0.049 0.3532 ALTUB00046 7 0.75 17.3184
ALTUB00352 2 0.065 0.4647 ALTUB00062 7 1 22.1676
ALTUB00235 2.25 0.065 0.5247 ALTUB00242 7.25 1.125 25.4581
ALTUB00519 2.25 0.049 0.3985 ALTUB00356 7.5 1 24.0149
ALTUB00094 2.5 0.065 0.5848 ALTUB00320 8 1 25.8622
ALTUB00022 3 0.065 0.7048 ALTUB00138 5 1 14.7784
ALTUB00349 5.5 0.5 9.2365
ALTUB00013 5.5 1 16.6257
ALTUB00095 6 0.25 5.311
ALTUB00104 6 0.5 10.1602
ALTUB00016 6 0.75 14.5475
ALTUB00361 6 1 18.473
ALTUB00215 6 1.25 21.9367
ALTUB00136 6 2 29.5568
ALTUB00135 6.25 0.75 15.2402
ALTUB00034 6.5 1 20.3203
ALTUB00046 7 0.75 17.3184
ALTUB00062 7 1 22.1676
ALTUB00242 7.25 1.125 25.4581
ALTUB00356 7.5 1 24.0149
ALTUB00320 8 1 25.8622
33 For more information call (800) 926-260034

6061-T6 Round Aluminum Tube

Extruded Seamless – 12 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 241
6063-T52 Round Aluminum Tube
Extruded – Random Mill Lengths
ASTM B 221
Square Tube
OD Thickness Pounds OD Thickness Pounds
CBS Part No. (Inches) (Inches) Per Foot CBS Part No. (Inches) (Inches) Per Foot
6063-T52 Square Aluminum Tube 6061-T6 Square Aluminum Tube
Extruded – 21 Foot Mill Lengths Extruded – 24 Foot Mill Lengths
ALTUB00416 2.5 0.065 0.5848 ALTUB00019 1.5 0.125 0.6285 ASTM B 221 AMS-QQ-A-200, ASTM B 221
ALTUB00427 2.655 0.505 4.22 ALTUB00377 2 0.125 0.8571
ALTUB00316 3.625 0.4375 5.1522 ALTUB00383 2.5 0.125 1.0856
Size Thickness Pounds Size Thickness Pounds
ALTUB00164 3.75 0.5 6.0037 ALTUB00080 3 0.125 1.3142
CBS Part No. (Inches) (Inches) Per Foot CBS Part No. (Inches) (Inches) Description Per Foot
ALTUB00418 4.775 0.375 6.0961 ALTUB00182 3 0.188 1.9332
ALSQT00030 0.5 0.062 0.1261 ALSQT00060 0.75 0.062 0.2001
ALTUB00007 5 1 14.7784 ALTUB00070 3.5 0.125 1.5428
ALSQT00008 0.75 0.125 0.3628 ALSQT00062 0.75 0.125 0.3666
ALTUB00052 6.25 0.5 10.622 ALTUB00092 4 0.125 1.7713
ALSQT00063 0.75 0.062 0.1981 ALSQT00043 1 0.125 0.5132
ALTUB00195 6.475 0.4875 10.7842 ALTUB00143 4 0.188 2.6207
ALSQT00001 1 0.062 0.2701 ALSQT00047 1 0.125 0.5132
ALTUB00153 6.5 0.75 15.933 ALTUB00117 5 0.125 2.2284
ALSQT00020 1 0.125 0.508 ALSQT00139 1.25 0.125 0.66
ALTUB00193 6.5 1 20.3203 ALTUB00069 6 0.125 2.6855
ALSQT00013 1.25 0.125 0.6531 ALSQT00019 1.25 0.125 0.6598
ALTUB00514 13.5 1.325 59.601
ALSQT00002 1.5 0.125 0.7982 ALSQT00014 1.5 0.1875 1.1547
ALTUB00308 14.25 0.469 32.789
ALSQT00009 1.5 0.062 0.4141 ALSQT00026 1.5 0.125 0.8065
ALSQT00070 1.5 0.125 0.7982 ALSQT00027 1.5 0.125 0.8065
ALSQT00054 1.75 0.125 0.9434 ALSQT00048 1.75 0.125 0.9531
ALSQT00017 2 0.125 1.0885 ALSQT00003 2 0.125 1.0997
6063-T6 Round Aluminum Tube
Extruded – Random Mill Lengths ALSQT00065 2 0.25 2.0318 ALSQT00011 2 0.1875 1.5946
ASTM B 221 ALSQT00025 3 0.125 1.669 ALSQT00016 2 0.125 1.0997
6061-T6 Round Aluminum Tube ALSQT00052 3 0.25 3.1929 ALSQT00057 2 0.25 2.0528
Extruded Structural – 24 Foot Mill Lengths
AMS-QQ-A-200, ASTM B 241 ALSQT00023 4 0.125 2.2496 ALSQT00066 2 0.125 1.0997
OD Thickness Pounds
CBS Part No. (Inches) (Inches) Per Foot ALSQT00053 4 0.25 4.354 ALSQT00073 2 0.125 1.036
ALSQT00059 5 0.125 2.778 ALSQT00022 2.5 0.125 1.3788
OD Thickness Thickness Pounds ALTUB00028 0.54 0.088 0.1455
ALSQT00058 6 0.125 3.4106 ALSQT00051 2.5 0.25 2.6393
CBS Part No. (Inches) (Inches) Tolerance Per Foot ALTUB00297 0.725 0.074 0.1762
ALSQT00029 8 0.188 6.8208 ALSQT00056 3 0.1875 2.4744
ALTUB00089 0.75 0.125 0.2886 ALTUB00040 0.84 0.109 0.2944
ALSQT00061 3 0.25 3.2258
ALTUB00075 1 0.25 0.6927 ALTUB00003 1.315 0.133 0.5808
ALSQT00018 4 0.25 4.3989
ALTUB00307 1 0.125 0.4041 ALTUB00466 2.375 0.154 1.264
ALSQT00028 4 0.5 8.2112
ALTUB00008 1.25 0.25 0.9237 ALTUB00398 2.875 0.203 2.004
ALSQT00040 4 0.125 2.33
ALTUB00373 1.25 0.125 0.5196 ALTUB00370 3.5 0.216 2.6207
ALSQT00042 4 0.1875 3.3541
ALTUB00397 1.25 0.188 0.7376 ALTUB00396 4 0.226 3.1191
ALSQT00055 4 0.375 6.3784
ALTUB00039 1.5 0.125 0.635 ALTUB00469 4.5 0.237 3.733
ALSQT00007 5 0.25 5.5719
ALTUB00288 1.625 0.2075 (±.008) 1.0867
ALSQT00005 6 0.188 5.1269
ALTUB00205 1.63 0.125 (±.02) 0.695
ALSQT00021 6 0.5 12.9034
ALTUB00037 1.75 0.25 (±.011) 1.3855
ALSQT00049 6 0.25 6.745
ALTUB00200 1.75 0.1775 (±.008) 1.0312
ALSQT00068 8 0.25 9.021
ALTUB00226 1.75 0.1125 (±.008) 0.6806
ALTUB00385 1.75 0.125 0.7505 6063-T832 Round Aluminum Tube ALSQT00069 8 0.5 17.46
Extruded Drawn Seamless – Random Mill Lengths
ALTUB00099 2 0.25 1.6164 ASTM B 210
ALTUB00390 2 0.125 0.8659
ALTUB00517 2.25 0.375 (±.015) 2.5978
ALTUB00090 2.5 0.25 2.0782 OD OD Thickness Thickness Pounds
ALTUB00348 2.625 0.5 3.9255 CBS Part No. (Inches) Tolerance (Inches) Tolerance Per Foot
ALTUB00457 2.625 0.375 3.1173 ALTUB00411 0.75 (±.004) 0.035 (±.002) 0.0924
ALTUB00082 3 0.125 1.3277 Precision processing is a
ALTUB00342 3 0.25 2.54
hallmark of our service.
ALTUB00484 3.25 0.25 2.771
ALTUB00121 4 0.125 1.7896
ALTUB00523 4 0.625 7.7933
ALTUB00492 4.5 0.5 7.3892
6262-T6511 Round Aluminum Tube
Extruded Seamless – Random Mill Lengths
ALTUB00524 4.5 0.625 8.9479 ASTM B 221
ALTUB00455 5 0.5 8.3129
ALTUB00456 5.5 0.5 9.2365
ALTUB00493 6 0.5 10.1602 OD Thickness Pounds
ALTUB00165 8.5 0.5 14.7784 CBS Part No. (Inches) (Inches) Per Foot
ALTUB00343 1.375 0.1875 0.8142
35 For more information call (800) 926-260036

Round Pipe Sheet & Coil

6061-T6 Schedule 40 Aluminum Pipe 6063-T6 Schedule 40 Aluminum Pipe 1100-H14 Aluminum Coil 2024-O Bare Aluminum Sheet
Extruded Seamless – 20 Foot Mill Lengths ASTM B 209 AMS 4035, AMS-QQ-A-250, ASTM B 209
Extruded Seamless – 20 Foot Mill Lengths
ASTM B 241 ASTM B 221, ASTM B 241
Thickness Width Pounds Thickness Width Length Pounds
Nominal OD Thickness Pounds Nominal OD Thickness Pounds CBS Part No. (Inches) (Inches) Square Foot CBS Part No. (Inches) (Inches) (Inches) Square Foot
CBS Part No. Pipe Size (Inches) (Inches) Per Foot CBS Part No. Pipe Size (Inches) (Inches) Per Foot ALFLR02438 0.19 72 ALFLR03258 0.02 48 144
ALTUB00395 0.25 0.54 0.088 0.147 ALTUB00466 2 2.375 0.154 1.264 ALFLR02589 0.248 72 ALFLR03229 0.025 48 144
ALTUB00362 1 1.315 0.133 0.5808 ALTUB00370 3 3.5 0.216 2.6207 ALFLR02978 0.249 48 ALFLR03316 0.04 48 144
ALTUB00068 1.25 1.66 0.14 0.7862 ALTUB00469 4 4.5 0.237 3.733 ALFLR01572 0.063 48 144
ALTUB00376 2 2.375 0.154 1.2637 ALFLR01573 0.125 48 144
ALTUB00014 2.5 2.875 0.203 2.004
ALTUB00124 3 3.5 0.216 2.6207
ALTUB00108 3.5 4 0.226 3.1512
ALTUB00066 4 4.5 0.237 3.7328 1100-H14 Aluminum Sheet
ALTUB00386 6 6.625 0.28 6.5638 6063-T6 Schedule 40 Aluminum Pipe ASTM B 209
Extruded Structural – 20 Foot Mill Lengths 2024-O Clad Aluminum Sheet
ASTM B 429
AMS 4040, AMS-QQ-A-250, ASTM B 209
Thickness Width Length Pounds
CBS Part No. (Inches) (Inches) (Inches) Square Foot
Nominal OD Thickness Pounds Thickness Width Length Pounds
CBS Part No. Pipe Size (Inches) (Inches) Per Foot ALFLR01252 0.032 48 144
CBS Part No. (Inches) (Inches) (Inches) Square Foot
6061-T6 Schedule 40 Aluminum Pipe ALTUB00028 0.25 0.54 0.088 0.1455
ALFLR01253 0.04 48 144
ALFLR03139 0.025 48 144
Extruded Structural – 20 Foot Mill Lengths ALFLR01254 0.05 48 144
ALTUB00040 0.5 0.84 0.109 0.2944 ALFLR02584 0.032 48 144
ASTM B 429 ALFLR01256 0.063 48 144
ALTUB00003 1 1.315 0.133 0.5808 ALFLR02585 0.04 48 144
ALFLR01258 0.09 48 144
ALTUB00398 2.5 2.875 0.203 2.004 ALFLR01751 0.05 48 144
ALFLR02439 0.09 48 88
Nominal OD Thickness Pounds ALTUB00396 3.5 4 0.226 3.1191 ALFLR01575 0.063 48 144
CBS Part No. Pipe Size (Inches) (Inches) Per Foot ALFLR02972 0.09 48 96
ALFLR01576 0.071 48 144
ALTUB00114 0.5 0.84 0.109 0.2944 ALFLR01259 0.125 48 96
ALFLR01577 0.08 48 144
ALTUB00065 0.75 1.05 0.113 0.3912 ALFLR01260 0.125 48 120
ALFLR02998 0.09 48 144
ALTUB00379 1 1.315 0.133 0.5808 ALFLR01261 0.125 48 144
ALFLR03000 0.125 48 144
ALTUB00306 1.25 1.66 0.14 0.7862 ALFLR01263 0.19 48 144
ALTUB00043 1.5 1.9 0.145 0.94 6101-T61 Schedule 40 Aluminum Pipe
ALTUB00521 1.5 1.9 0.145 0.94 Extruded – 20 Foot Mill Lengths
ALTUB00299 2 2.375 0.154 1.2637 ASTM B 317
ALTUB00106 2.5 2.875 0.203 2.004
ALTUB00522 2.5 2.875 0.203 2.004 Nominal OD Thickness Pounds
1100-O Aluminum Sheet 2024-T3 Bare Aluminum Sheet
ALTUB00400 3 3.5 0.216 2.6207 CBS Part No. Pipe Size (Inches) (Inches) Per Foot AMS 4037, AMS-QQ-A-250, ASTM B 209
ASTM B 209
ALTUB00380 3.5 4 0.226 3.1512 ALTUB00064 1 1.315 0.133 0.5749
ALTUB00298 4 4.5 0.237 3.7328 ALTUB00374 1.5 1.9 0.145 0.9306
Thickness Width Length Pounds
ALTUB00336 5 5.563 0.258 5.0568 ALTUB00120 2 2.375 0.154 1.2508 Thickness Width Length Pounds
CBS Part No. (Inches) (Inches) (Inches) Square Foot
CBS Part No. (Inches) (Inches) (Inches) Square Foot
ALFLR03255 0.016 48 144
ALFLR01239 0.032 36 96
ALFLR01578 0.02 48 144
ALFLR01240 0.04 48 144
ALFLR01579 0.025 48 144
ALFLR01251 0.05 48 144
ALFLR01580 0.032 48 144
ALFLR01243 0.063 48 144
6061-T6 Schedule 80 Aluminum Pipe ALFLR01581 0.04 48 144
6101-T61 Schedule 80 Aluminum Pipe ALFLR01244 0.08 48 144
ALFLR01582 0.05 48 144
Extruded Structural – 20 Foot Mill Lengths Extruded – 20 Foot Mill Lengths: ALFLR01246 0.09 48 144
ASTM B 429 ASTM B 317 ALFLR01583 0.063 48 144
ALFLR01247 0.125 48 96
ALFLR01584 0.071 48 144
ALFLR01249 0.125 48 144 ALFLR01585 0.08 48 144
Nominal OD Thickness Pounds Nominal OD Thickness Pounds ALFLR01586 0.09 48 144
CBS Part No. Pipe Size (Inches) (Inches) Per Foot CBS Part No. Pipe Size (Inches) (Inches) Per Foot
ALFLR01587 0.1 48 144
ALTUB00030 1.5 1.9 0.2 1.2562 ALTUB00243 1.5 1.9 0.2 1.2433
ALFLR01588 0.125 48 144
ALTUB00122 2 2.375 0.218 1.7373 ALTUB00453 2 2.375 0.218 1.737
ALFLR01589 0.16 48 144
ALTUB00073 2.5 2.875 0.276 2.65 ALTUB00329 2.5 2.875 0.276 2.65
ALFLR01590 0.19 48 144
ALTUB00024 3 3.5 0.3 3.547
ALTUB00392 3.5 4 0.318 4.325
ALTUB00454 4 4.5 0.337 5.183
37 For more information call (800) 926-260038

Thickness Width Length Pounds Thickness Width Length Pounds

CBS Part No. (Inches) (Inches) (Inches) Square Foot CBS Part No. (Inches) (Inches) (Inches) Square Foot
ALFLR01363 0.1 48 144 ALFLR01449 0.125 72 120
2024-T3 Clad Aluminum Sheet 5052-H32 Aluminum Sheet ALFLR01507 0.125 36 96
ALFLR03137 0.1 48 96
AMS 4041, AMS-QQ-A-250, ASTM B 209 ASTM B 209
ALFLR01364 0.125 36 96 ALFLR01508 0.125 48 96
ALFLR01365 0.125 48 96 ALFLR01509 0.125 48 120
Thickness Width Length Pounds ALFLR01367 0.125 48 120 Thickness Width Length Pounds ALFLR01510 0.125 36 144
CBS Part No. (Inches) (Inches) (Inches) Square Foot ALFLR01369 0.125 48 144 CBS Part No. (Inches) (Inches) (Inches) Square Foot ALFLR01511 0.125 36 120
ALFLR01591 0.016 48 144 ALFLR01370 0.125 60 120 ALFLR01445 0.02 48 144 ALFLR01512 0.125 48 144
ALFLR01592 0.02 48 144 ALFLR01373 0.125 60 144 ALFLR01454 0.02 48 96 ALFLR01513 0.125 72 144
ALFLR01593 0.025 48 144 ALFLR01374 0.19 48 144 ALFLR01455 0.02 48 120 ALFLR01515 0.125 60 96
ALFLR01594 0.032 48 144 ALFLR01376 0.19 60 144 ALFLR01458 0.025 48 120 ALFLR01518 0.125 60 120
ALFLR01595 0.04 48 144 ALFLR01377 0.19 48 96 ALFLR01459 0.025 48 96 ALFLR01519 0.125 60 144
ALFLR01596 0.05 48 144 ALFLR01378 0.19 48 120 ALFLR01460 0.025 48 144 ALFLR02546 0.125 48 96
ALFLR01597 0.063 48 144 ALFLR02965 0.249 48 144 ALFLR01464 0.032 48 96 ALFLR04131 0.125 48 96
ALFLR01598 0.071 48 144 ALFLR01465 0.032 48 120 ALFLR04132 0.125 48 144
ALFLR01599 0.08 48 144 ALFLR01466 0.032 48 144 ALFLR04133 0.125 60 144
ALFLR01600 0.09 48 144 ALFLR01467 0.04 36 120 ALFLR01535 0.16 48 96
ALFLR01601 0.1 48 144 ALFLR01468 0.04 36 144 ALFLR01537 0.16 48 144
ALFLR01602 0.125 48 144 ALFLR01469 0.04 36 96 ALFLR01516 0.19 48 120
3003-H14 Aluminum Coil ALFLR01470 0.04 48 96 ALFLR01517 0.19 60 120
ASTM B 209 ALFLR01471 0.04 48 144 ALFLR01539 0.19 48 96
ALFLR01473 0.05 36 96 ALFLR01540 0.19 48 144
Thickness Width Pounds ALFLR01474 0.05 36 120 ALFLR01542 0.19 60 144
CBS Part No. (Inches) (Inches) Square Foot ALFLR01475 0.05 36 144
3003-H14 Aluminum Sheet ALFLR04134 0.19 48 144
ALFLR01275 0.016 36 ALFLR01478 0.05 48 96
ASTM B 209 ALFLR04135 0.19 48 96
ALFLR01277 0.02 36 ALFLR01479 0.05 48 120
ALFLR01545 0.249 48 120
ALFLR03108 0.02 48.5 ALFLR01480 0.05 48 144
Thickness Width Length Pounds ALFLR01546 0.249 48 144
ALFLR01279 0.025 36 ALFLR01481 0.063 48 96
CBS Part No. (Inches) (Inches) (Inches) Square Foot ALFLR01547 0.249 60 144
ALFLR01281 0.032 36 ALFLR01483 0.063 36 96
ALFLR01313 0.016 36 96 ALFLR01548 0.249 48 96
ALFLR01284 0.04 36 ALFLR01484 0.063 36 120
ALFLR01314 0.02 36 96 ALFLR02889 0.249 60 96
ALFLR01289 0.063 48 ALFLR01485 0.063 36 144
ALFLR01316 0.025 36 96 ALFLR01491 0.063 48 144
ALFLR01317 0.025 48 96 ALFLR01492 0.063 60 120
ALFLR01318 0.032 36 96 ALFLR01493 0.063 60 144
ALFLR01322 0.032 48 120 ALFLR02544 0.063 48 96
ALFLR01323 0.032 48 144
3003-O Aluminum Sheet ALFLR02881 0.063 48 120 5052-H32 Aluminum Coil
ALFLR01326 0.04 36 96 ALFLR03238 0.063 48 96
ASTM B 209 ASTM B 209
ALFLR01328 0.04 48 96 ALFLR04123 0.063 48 120
ALFLR01329 0.04 48 120 ALFLR04124 0.063 48 96
Thickness Width Pounds
ALFLR01330 0.04 48 144 Thickness Width Length Pounds ALFLR01494 0.08 36 144 CBS Part No. (Inches) (Inches) Square Foot
ALFLR01331 0.05 36 96 CBS Part No. (Inches) (Inches) (Inches) Square Foot ALFLR01495 0.08 60 144
ALFLR01333 0.05 48 96 ALFLR01303 0.032 48 144 ALFLR03205 0.016 49
ALFLR01497 0.08 48 120
ALFLR01334 0.05 48 120 ALFLR01304 0.04 48 144 ALFLR01498 0.08 48 96 ALFLR01396 0.02 48
ALFLR01336 0.05 48 144 ALFLR01305 0.05 48 144 ALFLR01499 0.08 48 144 ALFLR01397 0.025 36
ALFLR01339 0.063 36 96 ALFLR01307 0.063 48 144 ALFLR01520 0.08 60 120 ALFLR01398 0.025 48
ALFLR01341 0.063 48 96 ALFLR01308 0.08 48 120 ALFLR01529 0.08 60 96 ALFLR01399 0.032 36
ALFLR01343 0.063 48 120 ALFLR01309 0.09 48 144 ALFLR03239 0.08 48 96 ALFLR01401 0.04 36
ALFLR01344 0.063 48 144 ALFLR01312 0.125 48 144 ALFLR01500 0.09 48 120 ALFLR01402 0.04 48
ALFLR01347 0.08 36 96 ALFLR01501 0.09 48 96 ALFLR01404 0.05 36
ALFLR01349 0.08 48 96 ALFLR01502 0.09 48 144 ALFLR01405 0.05 48
ALFLR01350 0.08 48 120 ALFLR01503 0.09 36 96 ALFLR01407 0.063 36
ALFLR01351 0.08 48 144 ALFLR01504 0.09 36 144 ALFLR01408 0.063 48
ALFLR01352 0.08 60 120 ALFLR01505 0.09 36 120 ALFLR01410 0.08 36
ALFLR01353 0.08 60 144 ALFLR01506 0.09 60 144 ALFLR01411 0.08 48
ALFLR02442 0.08 48 120 ALFLR01522 0.09 60 120 ALFLR01412 0.09 60
ALFLR03138 0.08 48 96 ALFLR03240 0.09 48 96 ALFLR01413 0.09 36
ALFLR01354 0.09 36 96 ALFLR04125 0.09 48 120 ALFLR01414 0.09 48
ALFLR01355 0.09 48 96 ALFLR04126 0.09 48 96 ALFLR01387 0.1 36
ALFLR01356 0.09 48 120 ALFLR04129 0.09 48 144 ALFLR01416 0.1 48
ALFLR01359 0.09 60 120 ALFLR04130 0.09 60 144 ALFLR01417 0.125 36
ALFLR01361 0.09 60 144 ALFLR02882 0.1 36 96 ALFLR01418 0.125 48
ALFLR01362 0.09 48 144 ALFLR02883 0.1 48 96
ALFLR01357 0.1 48 96 ALFLR02884 0.1 48 120
ALFLR01360 0.1 48 120 ALFLR02891 0.1 48 144
39 For more information call (800) 926-260040

5052-H34 Aluminum Sheet 5086-H32 Aluminum Sheet 6061-T4 Aluminum Sheet 7075-O Clad Aluminum Sheet
ASTM B 209 ASTM B 209 AMS 4026, ASTM B 209 AMS 4048, AMS-QQ-A-250, ASTM B 209

Thickness Width Length Pounds Thickness Width Length Pounds Thickness Width Length Pounds Thickness Width Length Pounds
CBS Part No. (Inches) (Inches) (Inches) Square Foot CBS Part No. (Inches) (Inches) (Inches) Square Foot CBS Part No. (Inches) (Inches) (Inches) Square Foot CBS Part No. (Inches) (Inches) (Inches) Square Foot
ALFLR02977 0.025 48 144 ALFLR01565 0.063 48 144 ALFLR02519 0.032 48 96 ALFLR03323 0.025 48 144
ALFLR01553 0.04 48 144 ALFLR01566 0.09 48 144 ALFLR02539 0.032 48 144 ALFLR03264 0.032 48 144
ALFLR01554 0.05 48 144 ALFLR01567 0.125 48 144 ALFLR01631 0.04 48 144 ALFLR02573 0.04 48 144
ALFLR01555 0.063 48 96 ALFLR01569 0.19 48 144 ALFLR01632 0.05 48 144 ALFLR02557 0.05 48 144
ALFLR01556 0.063 48 144 ALFLR01570 0.249 48 144 ALFLR01633 0.063 48 144 ALFLR02645 0.063 48 144
ALFLR02507 0.063 48 120 ALFLR01634 0.08 48 144 ALFLR03265 0.08 48 144
ALFLR01563 0.09 48 144 ALFLR01635 0.09 48 144 ALFLR03266 0.09 48 144
ALFLR01558 0.125 48 96 ALFLR03242 0.09 48 96 ALFLR03267 0.1 48 144
ALFLR02561 0.19 48 96 ALFLR01637 0.125 48 144 ALFLR03268 0.125 48 144
ALFLR01638 0.19 48 144
6061-O Aluminum Sheet
AMS 4025, ASTM B 209

Thickness Width Length Pounds

5052-O Aluminum Sheet CBS Part No. (Inches) (Inches) (Inches) Square Foot 7075-T6 Bare Aluminum Sheet
ASTM B 209 ALFLR01621 0.032 48 144 6061-T6 Aluminum Sheet AMS 4045, AMS-QQ-A-250, ASTM B 209
ALFLR01622 0.04 48 144 AMS 4027, ASTM B 209
Thickness Width Length Pounds ALFLR01623 0.05 48 144 Thickness Width Length Pounds
CBS Part No. (Inches) (Inches) (Inches) Square Foot ALFLR01624 0.063 48 144 Thickness Width Length Pounds CBS Part No. (Inches) (Inches) (Inches) Square Foot
ALFLR01438 0.04 48 144 ALFLR01625 0.08 48 144 CBS Part No. (Inches) (Inches) (Inches) Square Foot ALFLR03269 0.02 48 144
ALFLR01440 0.05 48 144 ALFLR01626 0.09 48 144 ALFLR01639 0.016 48 144 ALFLR03270 0.025 48 144
ALFLR01441 0.063 48 144 ALFLR03071 0.09 48 144 ALFLR01641 0.02 48 144 ALFLR01671 0.032 48 144
ALFLR03250 0.19 48 144 ALFLR01627 0.1 48 144 ALFLR01642 0.025 48 144 ALFLR01672 0.04 48 144
ALFLR01628 0.125 48 144 ALFLR01643 0.032 48 144 ALFLR01673 0.05 48 144
ALFLR01630 0.19 48 144 ALFLR01644 0.04 48 144 ALFLR01674 0.063 48 144
ALFLR01645 0.05 48 144 ALFLR03271 0.08 48 144
ALFLR01647 0.063 48 120 ALFLR01676 0.09 48 144
ALFLR02640 0.063 48 144 ALFLR01678 0.125 48 144
ALFLR01650 0.08 48 144 ALFLR01679 0.16 48 144
ALFLR01651 0.08 36 144 ALFLR01680 0.19 48 144
ALFLR01652 0.09 48 144
ALFLR01655 0.1 48 144
ALFLR01656 0.125 48 96
ALFLR01658 0.125 48 144
ALFLR01660 0.125 60 144
ALFLR03244 0.125 48 121 7075-T6 Clad Aluminum Sheet
ALFLR01661 0.16 48 144 AMS 4049, AMS-QQ-A-250, ASTM B 209
ALFLR01663 0.19 48 144
ALFLR01666 0.19 48 120 Thickness Width Length Pounds
CBS Part No. (Inches) (Inches) (Inches) Square Foot
ALFLR01681 0.032 48 144
ALFLR01682 0.04 48 144
ALFLR01683 0.05 48 144
ALFLR02623 0.063 48 144
ALFLR03019 0.071 48 144
ALFLR03001 0.08 48 144
ALFLR03002 0.09 48 144
ALFLR02564 0.1 48 144
ALFLR02615 0.125 48 144

Call and see why Copper and

Brass Sales is the first name in
Aluminum too.
41 For more information call (800) 926-260042

Plate
1100-H14 Aluminum Plate 5052-H32 Aluminum Plate
Mill Width x Mill Length
ASTM B 209 Mill Width x Mill Length
ASTM B 209

Thickness Pounds Thickness Pounds

CBS Part No. (Inches) Square Foot CBS Part No. (Inches) Square Foot
ALFLR00724 0.375 5.2920 ALFLR00803 0.375 5.2920
ALFLR00804 0.5 7.0560

2024-T351 Aluminum Plate

General Engineering Quality 6013-T651 Aluminum Plate
Non USI Tested – Mill Width x Mill Length
AMS 4037, AMS-QQ-A-250, ASTM B 209 Mill Width x Mill Length
ASTM B 209
Thickness Pounds
CBS Part No. (Inches) Square Foot This alloy combines the high corrosion resistance, high thermal conductivity, and
weldability of 6061-T651 with the higher Brinell hardness and strength characteristic
ALFLR00822 0.25 3.5280 of 2024-T351. It machines with the same feeds and speeds, chip sizes, and surface
ALFLR00823 0.3125 4.4100 finish that you find with 7075 and 2024. The material is heat treated, aged to peak
ALFLR00824 0.375 5.2920 strength, and stress relieved. It is suitable for use in many 6061 or 2024 applications.
ALFLR00829 0.5 7.0560 It is produced to a minimum of .030 inch over the nominal thickness.
ALFLR00830 0.625 8.8200 Thickness Pounds
ALFLR00831 0.75 10.5840 CBS Part No. (Inches) Square Foot
ALFLR00575 0.875 12.3480 ALFLR00851 0.25 3.5280
ALFLR00825 1 14.1120 ALFLR00848 0.375 5.2920
ALFLR00826 1.25 17.6400 ALFLR00852 0.5 7.0560
ALFLR00828 1.5 21.1680 ALFLR00171 0.625 8.8200
ALFLR00827 1.75 24.6960 ALFLR00853 0.75 10.5840
ALFLR00832 2 28.2240 ALFLR00854 1 14.1120
ALFLR00833 2.25 31.7520 ALFLR00850 1.25 17.6400
ALFLR00835 2.5 35.2800 ALFLR00855 1.5 21.1680
ALFLR02764 2.75 38.8080 ALFLR00864 1.75 24.6960
ALFLR00062 3 42.3360 ALFLR00857 2 28.2240
ALFLR00834 3.5 49.3920 ALFLR00868 2.25 31.7520
ALFLR00836 4 56.4480 ALFLR00859 2.5 35.2800
ALFLR00869 2.75 38.8080
ALFLR00856 3 42.3360
2024-T351 Aluminum Plate ALFLR00695 3.25 45.8640
Aircraft Quality ALFLR00860 3.5 49.3920
USI Tested – Mill Width x Mill Length ALFLR00858 4 56.4480
AMS-STD-2154, AMS 4037, AMS-QQ-A-250, ASTM B 209 ALFLR00861 4.5 63.5040
ALFLR02812 5 70.5600
Thickness Pounds ALFLR00863 5.5 77.6160
CBS Part No. (Inches) Square Foot ALFLR00862 6 84.6720
ALFLR00934 0.75 10.5840 ALFLR00866 7 98.7840
ALFLR00837 1 14.1120 ALFLR00867 8 112.8960
ALFLR00838 1.25 17.6400
ALFLR00935 1.5 21.1680
ALFLR02815 1.75 24.6960
ALFLR00839 2 28.2240
ALFLR00841 2.5 35.2800
ALFLR00842 2.75 38.8080
At Copper and Brass Sales, we
ALFLR00843 3 42.3360
can often satisfy your custom and ALFLR00844 3.5 49.3920
unusual requirements from stock ALFLR00845 4 56.4480
to save you time and money. ALFLR00846 5 70.5600
ALFLR00847 6 84.6720
43 For more information call (800) 926-260044

7050-T7451 Aluminum Plate 7075-T651 Aluminum Plate 7075-T651 Aluminum Plate

6061-T6 Aluminum Plate
Mill Width x Mill Length
Aircraft Quality General Engineering Quality Aircraft Quality
AMS 4027, ASTM B 209 USI Tested – Mill Width x Mill Length Non USI Tested – Mill Width x Mill Length USI Tested – Mill Width x Mill Length
AMS 4050, AMS-STD-2154, ASTM B 594 .030 Minimum Overgauge for Thickness 1 Inch and Greater AMS 4045, AMS-QQ-A-250, AMS-STD-2154, ASTM B 209
AMS 4045, AMS-QQ-A-250, ASTM B 209
Thickness Pounds Thickness Pounds
Thickness Pounds Thickness Pounds
CBS Part No. (Inches) Square Foot CBS Part No. (Inches) Square Foot
CBS Part No. (Inches) Square Foot CBS Part No. (Inches) Square Foot
ALFLR00979 11 155.2320 ALFLR03064 0.75 10.5840
ALFLR00983 0.25 3.5280 ALFLR01074 0.625 8.8200
ALFLR00553 12 169.3440 ALFLR01062 1 14.1120
ALFLR00984 0.375 5.2920 ALFLR00987 0.75 10.5840
ALFLR00981 14 197.5680 ALFLR01063 1.25 17.6400 ALFLR00985 0.5 7.0560 ALFLR00992 1 14.1120
ALFLR00484 15 211.6800 ALFLR01064 1.5 21.1680 ALFLR00986 0.625 8.8200 ALFLR00993 1.25 17.6400
ALFLR00982 16 225.7920 ALFLR01065 1.75 24.6960 ALFLR00430 0.75 10.5840 ALFLR00988 1.5 21.1680
ALFLR01066 2 28.2240 ALFLR00635 0.875 12.3480 ALFLR00989 1.75 24.6960
ALFLR01068 2.25 31.7520 ALFLR00994 1 14.1120 ALFLR01000 2 28.2240
ALFLR00995 1.25 17.6400 ALFLR01002 2.5 35.2800
6061-T651 Aluminum Plate ALFLR01008 3 42.3360
ALFLR00998 1.5 21.1680
Mill Width x Mill Length
AMS 4027, ASTM B 209
7050-T7451 Aluminum Plate ALFLR00996 1.75 24.6960 ALFLR01010 3.5 49.3920
Aircraft Quality ALFLR00999 2 28.2240 ALFLR01012 4 56.4480
USI Tested, Type 1 – Mill Width x Mill Length ALFLR01001 2.25 31.7520 ALFLR00991 5 70.5600
Thickness Pounds ALFLR01004 2.5 35.2800 ALFLR00875 6 84.6720
AMS 4050, AMS-STD-2154
CBS Part No. (Inches) Square Foot
ALFLR01005 2.75 38.8080
ALFLR00939 0.25 3.5280
Thickness Pounds ALFLR01006 3 42.3360
ALFLR00940 0.3125 4.4100 CBS Part No. (Inches) Square Foot
ALFLR00942 0.375 5.2920
ALFLR01009 3.25 45.8640 7075-T7351
ALFLR00876 2.5 35.2800 ALFLR00566 3.5 49.3920
ALFLR00941 0.4375 6.1740 ALFLR00877 2.75 38.8080
Aluminum Plate
ALFLR01011 3.75 52.9200
ALFLR00943 0.5 7.0560 Non USI Tested – Mill Width x Mill Length
ALFLR00878 3 42.3360 ALFLR00369 4 56.4480
ALFLR00872 0.5625 7.9380 AMS 4078, AMS-QQ-A-250, ASTM B 209
ALFLR00879 3.5 49.3920 ALFLR00433 4.5 63.5040
ALFLR00944 0.625 8.8200 ALFLR00616 3.75 52.9200 ALFLR01013 5 70.5600
ALFLR00120 0.75 10.5840 Thickness Pounds
ALFLR02691 4 56.4480 ALFLR00645 6 84.6720 CBS Part No. (Inches) Square Foot
ALFLR00945 0.875 12.3480 ALFLR01070 4.5 63.5040 ALFLR01014 7 98.7840 ALFLR01017 0.25 3.5280
ALFLR00946 1 14.1120 ALFLR01071 5 70.5600 ALFLR01015 8 112.8960
ALFLR00947 1.125 15.8760 ALFLR01018 0.5 7.0560
ALFLR00027 5.5 77.6160 ALFLR02994 9 127.0080
ALFLR00948 1.25 17.6400 ALFLR01019 0.625 8.8200
ALFLR01072 6 84.6720 ALFLR01016 10 141.1200
ALFLR00963 1.375 19.4040 ALFLR03068 6.5 91.7280
ALFLR00729 1.5 21.1680 ALFLR03058 7 98.7840
ALFLR00466 1.625 22.9320 ALFLR00678 8 112.8960 7075-T651 Typical Properties 7075-T7351 Aluminum Plate
ALFLR00428 1.75 24.6960
Mechanical Properties
Aircraft Quality
ALFLR00115 2 28.2240
USI Tested – Mill Width x Mill Length
ALFLR02667 2.25 31.7520 Thickness UTS (ksi) YTS (ksi) Elongation (%)
AMS 4078, AMS-QQ-A-250, AMS-STD-2154
ALFLR00531 2.5 35.2800 1 83 75 13
ALFLR00950 2.75 38.8080 4 75 63 11
Thickness Pounds
ALFLR00117 3 42.3360 6 67 53 11 CBS Part No. (Inches) Square Foot
ALFLR00238 3.25 45.8640 8 57 39 14 ALFLR02971 0.375 5.2920
ALFLR00949 3.5 49.3920 10 52 32 14
ALFLR00951 4 56.4480 ALFLR01022 0.75 10.5840
Density...................................................................................................101 lb/in3
ALFLR00741 4.25 59.9760 ALFLR01023 1 14.1120
Hardness ............................................................................................... 150 HRB
ALFLR00112 4.5 63.5040 ALFLR01024 1.25 17.6400
Coefficient of Thermal Expansion ................................................. 13.1 x 10-6 in/in·°F
ALFLR00952 5 70.5600 ALFLR01029 1.5 21.1680
Thermal Conductivity ........................................................................ 75 Btu/ft·h·°F
ALFLR00220 5.5 77.6160
Modulus of Elasticity ......................................................................... 10.4 x 106 psi ALFLR00353 1.75 24.6960
ALFLR00953 6 84.6720
ALFLR01031 2 28.2240
ALFLR00968 6.5 91.7280
ALFLR00970 7 98.7840 ALFLR01032 2.25 31.7520
ALFLR00123 8 112.8960 ALFLR00249 2.5 35.2800
ALFLR00279 8.5 119.9520 ALFLR01034 2.75 38.8080
ALFLR00972 9 127.0080 ALFLR01036 3 42.3360
ALFLR00174 10 141.1200
ALFLR01037 3.25 45.8640
ALFLR01038 3.5 49.3920
ALFLR01040 4 56.4480
ALFLR04099 5 70.5600
45 For more information call (800) 926-260046

Cast Tooling Plate Mold Materials

CAST5000 Max 5® Cast Aluminum Mold Plate
MIC 6® Cast Aluminum Tooling Plate Cast Precision Aluminum Plate Mill Width x Mill Length ALUMEC 99® Aluminum Mold Plate
Mill Width x Mill Length Mill Width x Mill Length Sawed 6 Sides Mill Width x Mill Length

This 7xxx series continuous-cast aluminum tooling plate exhibits very low internal stress. CAST5000 cast aluminum tooling plate exhibits very low internal stress. It also machines, Max 5® Cast Aluminum Mold Plate is manufactured from cast aluminum blocks with fine This high strength 7xxx series aluminum alloy has been developed to specifically resist
It is provided with a milled surface (< 20 RMS) on the top and bottom. It is suitable for welds, and anodizes quite well. It is provided with a milled surface (≤ 20 RMS) on the top grain structure and low porosity. After casting, the blocks are given a heat-treat process the occurrence of exfoliation corrosion normally found in blow mold water lines. This
use where flatness and stability are the desired characteristics. and bottom. It is suitable where flatness and stability are the desired characteristics. resulting in a stress-relieved and homogeneous metal with strength, excellent weldability, resistance to exfoliation corrosion will minimize the problems of cracked molds and
excellent machinability, and good anodize response. waterline damage. Its mechanical and physical properties are equal to or greater than
Thickness Thickness Pounds Thickness Pounds 7075-T651 with no softness in the center of the material as is common to 7075. It is
CBS Part No. (Inches) Tolerance Square Feet CBS Part No. (Inches) Square Foot Thickness Pounds produced to a minimum of .030 inch over the nominal thickness.
ALFLR00110 0.25 (±.005) 3.6360 ALFLR02981 0.25 3.4560 CBS Part No. (Inches) Square Foot
ALFLR00806 5 70.5600 Thickness Pounds
ALFLR00870 0.3125 (±.005) 4.5450 ALFLR02982 0.375 5.1840 CBS Part No. (Inches) Square Foot
ALFLR02983 0.5 6.9120 ALFLR00807 6 84.6720
ALFLR00871 0.375 (±.005) 5.4540 ALFLR00881 1 14.1120
ALFLR00808 7 98.7840
ALFLR00026 0.5 (±.005) 7.2720 ALFLR02984 0.625 8.6400 ALFLR01097 1.5 21.1680
ALFLR00809 8 112.8960
ALFLR00450 0.625 (±.005) 9.0900 ALFLR00684 0.75 10.3680 ALFLR01095 1.75 24.6960
ALFLR00810 9 127.0080
ALFLR00605 0.75 (±.005) 10.9080 ALFLR02985 0.875 12.0960 ALFLR00243 2 28.2240
ALFLR00811 10 141.1200
ALFLR00187 0.875 (±.005) 12.7260 ALFLR02686 1 13.8240 ALFLR00351 2.25 31.7520
ALFLR00812 11 155.2320
ALFLR00921 1 (±.005) 14.5440 ALFLR02986 1.25 17.2800 ALFLR00455 2.5 35.2800
ALFLR00813 12 169.3440
ALFLR00922 1.125 (±.005) 16.3620 ALFLR00681 1.5 20.7360 ALFLR00882 2.75 38.8080
ALFLR00814 13 183.4560
ALFLR00923 1.25 (±.005) 18.1800 ALFLR02684 1.75 24.1920 ALFLR00221 3 42.3360
ALFLR00815 14 197.5680
ALFLR00924 1.5 (±.005) 21.8160 ALFLR00084 2 27.6480 ALFLR00316 3.5 49.3920
ALFLR00816 16 225.7920
ALFLR00925 1.75 (±.005) 25.4520 ALFLR00704 2.25 31.1040 ALFLR02803 4 56.4480
ALFLR00926 2 (±.005) 29.0880 ALFLR00085 2.5 34.5600 ALFLR00064 4.625 65.2680
ALFLR00927 2.25 (±.005) 32.7240 ALFLR02860 3 41.4720 Max 5 ® Typical Properties (Data courtesy of PCP Canada) ALFLR01104 5 70.5600
ALFLR00928 2.5 (±.005) 36.3600 ALFLR02987 3.5 48.3840 ALFLR00383 5.5 77.6160
ALFLR00929 2.75 (±.005) 39.9960 Tolerances
ALFLR02988 4 55.2960 ALFLR02837 6 84.6720
ALFLR00930 3 (±.005) 43.6320 Width, length and thicknesses................................................ +.250/-.000 in.
ALFLR03048 5 69.1200
ALFLR00931 3.5 (±.005) 50.9040 Flatness....................................................................................... 0.125 in.
ALFLR03049 6 82.9440
Surface condition................................................................. Precision Sawed ALUMEC 99 ® Typical Properties
ALFLR02759 4 (±.005) 58.1760
Physical Properties
Density......................................................................................... 0.096 lb/in3 Yield Strength
CAST5000 Typical Properties
Elastic Modulus...................................................................... 10.3 x 106 psi 1 inch thick ............................................................................................... 70 ksi
MIC 6® Typical Properties (Data courtesy of Alcoa) 4 inches thick............................................................................................. 65 ksi
Density .......................................................................................... 0.096 lb/in3 Coefficient of Thermal Expansion......................... 13.2 μin/in °F (68°F – 212°F)
6 inches thick............................................................................................. 64 ksi
Tensile Strength .............................................................................. Typical 24 ksi Elastic Modulus............................................................................. 10.3 x 106 psi Thermal Conductivity (68°F)................................................ 69 - 80 Btu/ft.h°F
Ultimate Tensile Strength
Yield Strength ................................................................................. Typical 15 ksi Coefficient of Thermal Expansion (68 - 212 °F) .......................... 13.2 micro in/in·°F Electrical Conductivity (68°F).......................................................... 28% IACS
1 inch thick ............................................................................................... 78 ksi
Percent of Elongation ..................................................................................... 3% Thermal Conductivity (68 °F) ........................................................ 69.3 Btu/ft·h·°F Mechanical Properties (Typical)
4 inches thick............................................................................................. 74 kis
Brinell Hardness ............................................................................................. 65 Yield YS..................................................................................... 16 – 21 ksi 6 inches thick............................................................................................. 73 ksi
Electrical Conductivity (68 °F) ............................................................... 27% IACS
Tensile UTS............................................................................... 34 – 38 ksi Percent Elongation
Coefficient of Thermal Expansion (average) Tensile Strength UTS ..........................................................................41,000 psi
Elongation.......................................................................................... 15 % 1 inch thick ...................................................................................................... 12%
68 to 212 °F (20 to 100 °C) ................................................... 13.1 x 10-6 in/in·°F Yield Strength YS ...............................................................................18,000 psi Brinell Hardness....................................................................... 70 - 80 HRB 4 inches thick................................................................................................... 11%
68 to 392 °F (20 to 200 °C) ................................................... 13.6 x 10-6 in/in·°F Elongation in 2" ......................................................................................... 16% Processing Characteristics 6 inches thick.....................................................................................................9%
Thermal Conductivity ....................................................................... 82 Btu/ft·h·°F Brinell Hardness .................................................................................... 70 HRB Machinability.................................................................................. Excellent Surface Hardness ........................................................................................ 165 Hb
Electrical Conductivity, IACS.......................................................................... 36% Thickness Tolerance ............................................................................. ±0.005" Weldability (Mig/Tig 5183 filler)........................................................ Excellent Coefficient of Thermal Expansion (average)
Modulus of Elasticity ....................................................................... 10.3 x 106 psi Width and Length Tolerance ..................................................... +0.125" / -0.000" Corrosion Resistance...................................................................... Excellent 68 to 212 °F (20 to 100 °C) ...................................................... 13.0 x 10-6 in/in·°F
MIC 6 is a registered trademark of Alcoa Inc. Flatness Polishing............................................................................................ Good Thermal Conductivity .......................................................................... 96 Btu/ft·h·°F
0.250" – 0.500" ............................................................................... ±0.015" Anodize response......................................................... Good, Not Decorative Modulus of Elasticity ........................................................................... 10.4 x 106 psi
Stability......................................................................................... Excellent Density.................................................................................................. 0.102 lb/in3
0.625" – 4" ..................................................................................... ±0.005"
Formability...................................................................... Not Recommended ALUMEC 99 is a registered trademark of Alcoa Inc.
Surface Finish ................................................................. ≤ 20 µinch / ≤ 0.50 µm
Max 5 is a registered trademark of PCP Canada.

7022-T6511 Aluminum Half Round Bar

Extruded – 13.13 Foot Mill Lengths

This high strength custom aluminum shape is often used in mold construction and has
higher hardness and strength than 7075-T651. The consistency of these properties do
not decrease as rapidly through thickness as 7075-T651.

Diameter Pounds
CBS Part No. mm (Inches) Per Foot
ALCUS00098 154 (6.063) 17.314


47 For more information call (800) 926-260048

Now, an advanced aluminum alloy

to replace P-20 in production
Advanced Aluminum Alloy
injection molds. Mold Products
QC-10® Aluminum Mold Plate is the only alloy specifically designed to QC-10 ® Typical Properties (Data courtesy of Alcoa)
the meet the unique needs of the plastic injection molding industry. Yield Strength
With its high strength, high surface hardness, high through-thickness 2 – 6 inches .............................................................................................. 76 ksi
8 – 12 inches ............................................................................................ 72 ksi
hardness, and superior corrosion resistance, QC-10® delivers a new
14 – 18 inches .......................................................................................... 68 ksi
standard of performance in demanding mold applications. > 20 inches ............................................................................................... 66 ksi
QC-10® has been successfully substituted for P-20 steel in a number Ultimate Strength
2 – 6 inches .............................................................................................. 82 ksi
of production injection mold applications making hundreds-of-
8 – 12 inches ............................................................................................ 77 ksi
thousands of parts with greatly reduced cycle times. 14 – 18 inches .......................................................................................... 74 ksi
Some of the advantages of QC-10® over P-20 are: > 20 inches ............................................................................................... 72 ksi
Elongation
• From 20% – 30% improved cycle times 2 – 6 inches ............................................................................................... 10%
(much higher thermal conductivity). 8 –12 inches ................................................................................................ 8%
14 – 18 inches ............................................................................................. 6%
• Over 50% faster CNC feeds and speeds. > 20 inches .................................................................................................. 3%
Density ................................................................................................ 0.103 lb/in3
• One-third the weight of steel. Hardness at Center ............................................................................. 150 - 170 BH
Coefficient of Thermal Expansion........................................................... 13.7 x 10-6/°F
Thermal Conductivity ................................................................................ 92 Btu/°F
Specific Heat ....................................................................................0.210 Btu/lb/°F
Modulus of Elasticity ........................................................................... 10.4 x 106 psi
QC-10 is a registered trademark of Alcoa Inc.

QC-10® Aluminum Mold Plate

Mill Width x Mill Length

QC-10 is a very high strength 7xxx series aluminum mold plate especially developed for the injection mold and blow mold industries. It combines the highest strength and hardness
®

by thickness of any aluminum mold product and maintains very high thermal conductivity. The product has very low quench sensitivity, therefore it has very uniform through-thick-
ness hardness and strength, even in very thick sections. This results in very good stability when machining. QC-10® also has superior corrosion resistance for a 7xxx series alloy. It is
produced to a minimum of .030 inch over the nominal thickness.

Thickness Pounds Thickness Pounds

CBS Part No. (Inches) Square Foot CBS Part No. (Inches) Square Foot
ALFLR00653 1 14.8320 ALFLR00129 4.5 66.7440
ALFLR00604 1.25 18.5400 ALFLR01085 5 74.1600
ALFLR01080 1.5 22.2480 ALFLR01086 6 88.9920
ALFLR01084 1.75 25.9560 ALFLR01088 7 103.8240
ALFLR00437 2 29.6640 ALFLR01087 8 118.6560
ALFLR01079 2.25 33.3720 ALFLR01089 9 133.4880
ALFLR01082 2.5 37.0800 ALFLR00111 10 148.3200
ALFLR02722 2.75 40.7880 ALFLR02979 11 163.1520
ALFLR00392 3 44.4960 ALFLR01090 12 177.9840
ALFLR00514 3.25 48.2040 ALFLR01091 14 207.6480
ALFLR00444 3.5 51.9120 ALFLR00394 16 237.3120
ALFLR00534 3.75 55.6200 ALFLR00395 18 266.9760
ALFLR01081 4 59.3280 ALFLR00440 20 296.6400
ALFLR00449 4.25 63.0360
49 For more information call (800) 926-260050

Comparative Characteristics of
Aluminum Plate
Avg. Coefficient
Typical Properties Corrosion Resistance
Thermal of Thermal
Surface Conductivity Specific Heat Stress Expansion Modulus of
Thickness UTS YTS Elongation Hardness (Btu/ft/hr/ @ 70°F Poission’s Corrosion (x10 -6/in/in/°F, Elasticity Density
Alloy Description (Inches) (ksi) (ksi) (%) (Hb) ft 2/°F) (Btu/Lb) Ratio General Exfoliation Cracking Weldability Machinability Polishability 68 - 212°F) (x106 lb/in2) (lb/in3)
QC-10® Alcoa High Strength 1 81 78 15
Wrought Aluminum 4 80 74 14
6 80 74 6
8 77 71 8
150 - 170 92 0.210 0.33 B A A D B 70% Excellent 13.7 10.4 0.103
10 76 70 6
12 74 68 6
16 74 67 5
20 74 65 5
Alumec 99® Alcoa High Strength 1 78 70 12
Wrought Aluminum 4 74 65 11 165 96 0.33 B A A D B 70% Excellent 13.0 10.4 0.102
6 73 64 9
7075-T651 High Strength 1 83 75 13
Wrought Aluminum 4 75 63 11
6 67 53 11 150 75 0.229 0.33 C C C D B 70% Very Good 13.1 10.4 0.101
8 57 39 14
10 52 32 14
2024-T351 Medium Strength 1 67 46 18
Wrought Aluminum 4 68 47 16 120 70 0.209 0.33 D D D B B 70% Good 12.9 10.6 0.100
6 62 43 12
6013-T651 Alcoa Medium Strength 1 57 51 11
wWrought Aluminum 4 60 54 6
120 95 0.33 A A A A B 70% Very Good 13.0 10.1 0.096
6 59 52 7
8 56 51 5
6061-T651 Medium Strength 1 46 42 14
Wrought Aluminum 4 48 43 13
6 47 43 11 95 96 0.214 0.33 A A A A C 50% Good 13.1 10.0 0.096
8 45 39 11
10 45 39 11
6061-T6 Medium Strength 12 38 33 9
Wrought Aluminum 95 96 0.214 0.33 A A A A C 50% Good 13.1 10.0 0.096
16 38 29 11
Cast 5000 Cast 5083 Machined 3 – 41 41 18 16 70 81 0.33 A A A A B 70% Very Good 13.2 10.3 0.096
Cast 5000 Cast 5083 Tool & Jig 1/4 – 6 41 18 16 70 81 0.33 A A A A B 70% Very Good 13.2 10.3 0.096
Mic-6® Alcoa Cast Tool & Jig 1/4 – 4 24 15 3 65 83 0.33 C C C D C 50% Good 13.1 10.3 0.101
 51

Materials Services thyssenkrupp Materials NA

Copper and Brass Sales Copper and Brass Sales

thyssenkrupp Materials NA For more information call (800) 926-2600

22355 West Eleven Mile Road
Southfield, MI 48033
P: (800) 926-2600
www.tkmna.com

CBS 031-04-17 Revised