CAPEL-205: Capillary Electrophoresis System
Uploaded by
abdurahman143CAPEL-205: Capillary Electrophoresis System
Uploaded by
abdurahman143CAPEL-205
Capillary electrophoresis system
MAIN APPLICATIONS
Environmental analysis Food testing
Natural, drinking, and waste water Bottled water
(F −, Cl−, Br−, I−, NO2−, NO3−, PO43−, SO42−, (inorganic and organic anions and cations)
acetate, NH4+ , Ba2+, Ca2+, K+, Mg2+, Na+, and
Carbonated drinks and juices
other inorganic and organic ions)
(sweeteners, preservatives, synthetic dyes,
Soils, sludge, and sediments antioxidants, vitamins, inorganic cations and
(inorganic and organic anions and cations) anions, organic acids, sugars)
Animal feeding & Veterinary Beer (inorganic cations and anions, hop and
bitter acids (humulones and isohumulones),
Fodder, mixed fodder, and mixed fodder raw amino acids, organic acids, vitamins)
materials
(amino acids, cations and anions, organic Strong drinks
acids, vitamins) (inorganic cations and anions, aromatic
aldehydes, organic acids, sugars)
Veterinary drugs
(antibiotics, antiprotozoal agents) Tea, coffee
(caffeine, polyphenols)
Biopharma
Foodstuff
Quality control of therapeutic recombinant (preservatives and other food additives,
proteins organic acids, amino acids, amines, proteins)
Protein separation Milk and milk products
(sugars, inorganic cations and anions,
Enantiomers separation
organic acids, vitamins, proteins,
Pharmacokinetics studies sweeteners, preservatives)
WWW.LUMEXINSTRUMENTS.COM
ADVANTAGES OF CAPEL-205
High capacity autosampler for sealed vials SPECIFICATIONS
with automatic opening
Detection wavelength 190–400 nm, light source – deuterium lamp
Standard Eppendorf® type vial (1.5 mL) Constant voltage, from –30 kV to +30 kV in 1 kV steps
No sample evaporation Automatic (electronic) polarity switch
No sample contamination Current 0–300 μА
Analysis
Pressure, up to 100 mbar
Easy-to-change capillary cassette
Programmable changing of wavelength, pressure
Capillary cassette change just in and voltage during analysis
a few seconds
By voltage, from –30 kV to +30 kV in 1 kV steps;
Injection
by pressure, from –100 to 100 mbar in 1 mbar steps
Extended instrumental options
Rinsing By pressure, 500–2000 mbar in 1 mbar steps
Complete control of the instrument
from a PC Length 30–120 cm
Capillary
Broad range of controlled injection Internal diameter 50, 75 μm
pressures allows analysis of viscous Temperature control Liquid thermostating, from –10 up to +30 °C
samples of capillary from ambient temperature, ±0.1°C
Reverse sample injection under Autosampler for 59 vials
vacuum: ultra-short analysis time Sampler
(standard Eppendorf®-type 1.5 mL)
(less than 1 min) and sample stacking
Power requirements 110–240 VAC, 50/60 Hz
to decrease detection limit
Power consumption 170 W
Spectra scanning facilitates peak
identification Dimensions/Weight 470x530x410 mm, 30 kg
Control Elforun software
Precise liquid temperature control
of capillary (± 0.1°C)
Extended range of applied buffers, EQUIPMENT & OPTIONS
increased efficiency in separation Capillary electrophoresis system CAPEL-205
Powerful software package «Elforun» Spare capillary cassette
Elforun software package
Increased flexibility in performing
analyses of various complexity Kits & sets for analysis (by request)
Any kinds of complex runs are possible SERVICES
including those with pre-programming Installation of instruments can be carried out at a Customer's
of changes in analysis conditions site by our service engineers. Personnel training specific to the
Customized report, data export Customer needs can be also provided.
to other programs
WARRANTY
Streaming potential control technique All CAPEL-205 capillary electrophoresis systems are covered
Improving repeatability of migration by a 12-month warranty.
time and accuracy of analysis
Find your local Lumex Instruments distributor
www.lumexinstruments.com
[email protected]
The information and specifications in this publication are subject to change without notice. 19LEN03.20.01-1
