Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    Final Drive Chain and Sprocket Wear Inspection

    Uploaded by

    Anonymous nIcSGEw
    The document provides instructions for inspecting the final drive chain and sprockets of a motorcycle. It lists the following steps: (1) measure the length of 20 chain links and compare to the maximum service limit of 319mm, (2) inspect the chain for damaged rollers and loose pins, (3) inspect sprockets for worn or damaged teeth, (4) replace chain and/or sprockets if irregularities are found. It warns to have maintenance done by an authorized dealer and only use genuine Triumph parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Final Drive Chain and Sprocket Wear Inspection

    Uploaded by

    Anonymous nIcSGEw
    143 views2 pages
    The document provides instructions for inspecting the final drive chain and sprockets of a motorcycle. It lists the following steps: (1) measure the length of 20 chain links and compare to the maximum service limit of 319mm, (2) inspect the chain for damaged rollers and loose pins, (3) inspect sprockets for worn or damaged teeth, (4) replace chain and/or sprockets if irregularities are found. It warns to have maintenance done by an authorized dealer and only use genuine Triumph parts.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for inspecting the final drive chain and sprockets of a motorcycle. It lists the following steps: (1) measure the length of 20 chain links and compare to the maximum service limit of 319mm, (2) inspect the chain for damaged rollers and loose pins, (3) inspect sprockets for worn or damaged teeth, (4) replace chain and/or sprockets if irregularities are found. It warns to have maintenance done by an authorized dealer and only use genuine Triumph parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    143 views2 pages

    Final Drive Chain and Sprocket Wear Inspection

    Uploaded by

    Anonymous nIcSGEw
    The document provides instructions for inspecting the final drive chain and sprockets of a motorcycle. It lists the following steps: (1) measure the length of 20 chain links and compare to the maximum service limit of 319mm, (2) inspect the chain for damaged rollers and loose pins, (3) inspect sprockets for worn or damaged teeth, (4) replace chain and/or sprockets if irregularities are found. It warns to have maintenance done by an authorized dealer and only use genuine Triumph parts.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    2/2/2020 Final Drive Chain and Sprocket Wear Inspection

    Final Drive Chain and Sprocket Wear Inspection

    WARNING

    Before starting work, ensure the motorcycle is stabilised and adequately supported. This
    will help prevent it from falling and causing injury to the operator or damage to the
    motorcycle.

    1. Measure across 20 links


    2. Weight

    1. Remove the chain guard.


    2. Stretch the chain taut by hanging a 10 - 20 kg (20 - 40 lb) weight on the chain.
    3. Measure the length of 20 links on the straight part of the chain from pin centre of the 1st
    pin to the pin centre of the 21st pin. Since the chain may wear unevenly, take
    measurements in several places.
    4. If the length exceeds the maximum service limit of 319 mm, the chain must be replaced.
    5. Rotate the rear wheel and inspect the drive chain for damaged rollers, and loose pins
    and links.
    6. Also inspect the sprockets for unevenly or excessively worn or damaged teeth.

    https://www.tritun.net/tritun/content/document/view?id=3936&groupId=2#InfoType04-1644888843-54043197416625931!!94!532 1/2
    2/2/2020 Final Drive Chain and Sprocket Wear Inspection

    7. If there is any irregularity, have the drive chain and/or the sprockets replaced by an
    authorised Triumph dealer.
    8. Refit the chain guard, tightening the fixings to 4 Nm.

    WARNING

    Never neglect chain maintenance and always have chains installed by an authorised
    Triumph dealer.
    Use a genuine Triumph-supplied chain as specified in the Triumph Parts Catalogue.
    The use of non-approved chains may result in a broken chain or may cause the chain to
    jump off the sprockets leading to loss of motorcycle control or an accident.

    CAUTION

    If the sprockets are found to be worn, always replace the sprockets and drive chain
    together.
    Replacing worn sprockets without also replacing the chain will lead to premature wear of
    the new sprockets.

    https://www.tritun.net/tritun/content/document/view?id=3936&groupId=2#InfoType04-1644888843-54043197416625931!!94!532 2/2

    You might also like