Scribd
Upload
53 views

Method of Sections - Analysis of Simple Trusses

Uploaded by

Yani Franz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
53 views

Method of Sections - Analysis of Simple Trusses

Uploaded by

Yani Franz
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Method of Sections | Analysis of Simple

Trusses
Method of Sections
In this method, we will cut the truss into two sections by passing a cutting plane through the
members whose internal forces we wish to determine. This method permits us to solve directly
any member by analyzing the left or the right section of the cutting plane.

To remain each section in equilibrium, the cut members will be replaced by forces equivalent to
the internal load transmitted to the members. Each section may constitute of non-concurrent
force system which three equilibrium equations can be written.

ΣFH=0, ΣFV=0, and ΣMO=0

Because we can only solve up to three unknowns, it is important not to cut more than three
members of the truss. Depending on the type of truss and which members to solve, one may have
to repeat Method of Sections more than once to determine all the desired forces.
Problem 001
From the truss in Fig. T-01, determine the force in members BC, CE, and EF.

Solution 001

ΣMA=0

3RD=50(2)+80(0.75)

RD=53.33 kN

From the FBD of the section through a-a


ΣME=0

0.75FBC+2RD=0.75(80)+1(50)

0.75FBC+2(53.33)=60+50

FBC=4.45 kN tension Answer


ΣMC=0

0.75FEF=1(RD)

0.75FEF=53.33

FEF=71.11 kN tension answer

ΣFV=0

3/5FCE+50=RD

3/5FCE+50=53.33

FCE=5.55 kN tension answer


Problem 002
Refer to the truss described in problem and compute the force in members BD, CD, and CE by
the method of sections.

Solution

ΣMF=0

15RA=12(400+200)+6(800+200)

RA=880 kN
From section through MN
ΣMC=0

6(2/√5FBD)=3(880)

FBD=491.93 kN compression answer

ΣMF=0

12(1/√5FCD)+12(400+200)=15(880)

FCD=1118.03 kN compression answer

ΣMD=0

3FCE+6(400+200)=9(880)

FCE=1440 kN tension answer

You might also like