Scribd
Upload
71 views

Combisteamer: S Oftware Update

The document provides instructions for performing a software update on a Combisteamer unit. It explains that the update file needs to be copied to a USB stick in a specific folder structure. It then outlines the steps to launch the update within the unit's settings menu, noting that the process can take up to 15 minutes to complete as the software restarts multiple times. A confirmation message will appear once finished and the unit may need to be restarted if the software fails to load after the update is complete.

Uploaded by

Luis Jose Peñate Hoyos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views

Combisteamer: S Oftware Update

The document provides instructions for performing a software update on a Combisteamer unit. It explains that the update file needs to be copied to a USB stick in a specific folder structure. It then outlines the steps to launch the update within the unit's settings menu, noting that the process can take up to 15 minutes to complete as the software restarts multiple times. A confirmation message will appear once finished and the unit may need to be restarted if the software fails to load after the update is complete.

Uploaded by

Luis Jose Peñate Hoyos
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Software update

Combisteamer

Unit Energy type Unit type Model


SpaceCombi Electric Tabletop unit SKECOD610TG2
MagicPilot
Built-in unit EKECOD610TG2
Junior MagicPilot Countertop unit SKECOD623TG2
Built-in unit EKECOD623TG2

10000008764ASAE- en-US
Software

8 Software
8.1 Overview

USB

8.2 Opening the basic settings menu

Switch on the unit.


Tap the "Unit functions" field.
Display of Appliance functions menu.

Tap the "Settings" field.


Display of window "PIN".

Enter password and touch Confirmation field.


The password for the Settings menu is 111.
Display of the basic settings menu.
Software

8.3 Software update


Prerequisite
USB stick.
Maximum size 32 GB.
FAT formatting (default).
The disk should be empty if possible.
Current software update.
The update is provided as packed ZIP file.

Preparing the USB stick


Open and download Zip file and unzip. In general, the unzipped
folder is in the same directory as the previously compressed one.
Copy unzipped folder "MMIUpdate" to the USB stick.
The update file is in the folder.
The file has the extension "sw2".
For instance, "020026.sw2" (software update V2.0.26).

Performing the update


Open the basic settings menu or service menu
Select the "Software update" field on the left area of the menu by
swiping.
Tap the "Software update" field.
Tap the "OK" field.
The update begins.

The update can take up to 15 minutes. The software is restarted


several times. Do not switch unit off.

A confirmation then appears on the touchscreen.


Tap the "OK" field.
The software restarts automatically.

After the update, a blue screen may appear and the software
does not start. In this case, switch the unit off and then back on.
In rare cases, this may happen again.

You might also like