Scribd
Upload
252 views3 pages

API Flanged - Studded Crosses and Tees Slide Rule

This document contains a slide rule for calculating the dimensions of flanged studded crosses and tees based on the inlet and outlet sizes, pressure rating, and material. It provides the center-to-face measurements for vertical and horizontal runs for various pipe sizes from 2 1/16 inches to 5 1/8 inches at pressure ratings from 2,000 PSI to 15,000 PSI. The slide rule can be used to determine the required dimensions to construct flanged pipe fittings like crosses and tees for different piping configurations and pressures.

Uploaded by

Ramzi BEN AHMED
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
252 views3 pages

API Flanged - Studded Crosses and Tees Slide Rule

This document contains a slide rule for calculating the dimensions of flanged studded crosses and tees based on the inlet and outlet sizes, pressure rating, and material. It provides the center-to-face measurements for vertical and horizontal runs for various pipe sizes from 2 1/16 inches to 5 1/8 inches at pressure ratings from 2,000 PSI to 15,000 PSI. The slide rule can be used to determine the required dimensions to construct flanged pipe fittings like crosses and tees for different piping configurations and pressures.

Uploaded by

Ramzi BEN AHMED
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

FLANGED_STUDDED CROSSES AND TEES SLIDE RULE Run Outlet PSI

5 1/8 - 1 13/16 - 15,000

22.88

11.44
5 1/8

9.38

1 13/16

18.76

Centre to face Centre to face


Vertical Horizontal Pressure vertical run horizontal run
run outlet
Bv Bo rating HHv HHo
±0.03 ±0.03
2 1/16 2 1/16 2000 5.81 5.81
2 9/16 2 1/16 2000 5.94 6.31
2 9/16 2 9/16 2000 6.56 6.56
3 1/8 2 1/16 2000 6.06 6.69
3 1/8 2 9/16 2000 6.56 6.81
3 1/8 3 1/8 2000 7.06 7.06
4 1/16 2 1/16 2000 6.31 7.94
4 1/16 2 9/16 2000 6.81 8.06
4 1/16 3 1/8 2000 7.19 8.19
4 1/16 4 1/16 2000 8.56 8.56
3 1/8 2 1/16 3000 7.31 7.81
3 1/8 2 9/16 3000 7.88 7.94
3 1/8 3 1/8 3000 7.56 7.56
4 1/16 2 1/16 3000 7.56 8.81
4 1/16 2 9/16 3000 8.12 8.94
4 1/16 3 1/8 3000 8.06 8.81
4 1/16 4 1/16 3000 9.06 9.06
2 1/16 2 1/16 5000 7.31 7.31
2 9/16 2 1/16 5000 7.44 7.88
2 9/16 2 9/16 5000 8.31 8.31
3 1/8 2 1/16 5000 7.69 8.31
3 1/8 2 9/16 5000 8.25 8.44
3 1/8 3 1/8 5000 9.31 9.31
4 1/16 2 1/16 5000 7.94 9.19
4 1/16 2 9/16 5000 8.50 9.31
4 1/16 3 1/8 5000 8.94 9.56
4 1/16 4 1/16 5000 10.81 10.81
5 1/8 2 1/16 5000 9.06 10.56
5 1/8 2 9/16 5000 9.62 10.69
5 1/8 3 1/8 5000 10.06 10.94
5 1/8 4 1/16 5000 10.93 11.19
5 1/8 5 1/8 5000 12.19 12.19

Page1 of 3
FLANGED_STUDDED CROSSES AND TEES SLIDE RULE Run Outlet PSI
5 1/8 - 1 13/16 - 15,000

22.88

11.44
5 1/8

9.38

1 13/16

18.76

Centre to face Centre to face


Vertical Horizontal Pressure vertical run horizontal run
run outlet
Bv Bo rating HHv HHo
±0.03 ±0.03
2 1/16 1 13/16 10,000 6.67 6.84
2 1/16 2 1/16 10,000 6.92 6.92
2 9/16 1 13/16 10,000 6.95 7.47
2 9/16 2 1/16 10,000 7.20 7.55
2 9/16 2 9/16 10,000 7.83 7.83
3 1/16 1 13/16 10,000 7.23 8.22
3 1/16 2 1/16 10,000 7.48 8.30
3 1/16 2 9/16 10,000 8.11 8.58
3 1/16 3 1/16 10,000 8.86 8.86
4 1/16 1 13/16 10,000 7.81 9.25
4 1/16 2 1/16 10,000 8.06 9.33
4 1/16 2 9/16 10,000 8.69 9.61
4 1/16 3 1/16 10,000 9.44 9.89
4 1/16 4 1/16 10,000 10.34 10.34
5 1/8 1 13/16 10,000 8.19 10.06
5 1/8 2 1/16 10,000 8.44 10.12
5 1/8 2 9/16 10,000 9.06 10.42
5 1/8 3 1/16 10,000 9.81 10.69
5 1/8 4 1/16 10,000 10.72 11.19
5 1/8 5 1/8 10,000 11.53 11.53
2 1/16 1 13/16 15,000 7.34 7.41
2 1/16 2 1/16 15,000 7.62 7.62
2 9/16 1 13/16 15,000 7.59 8.03
2 9/16 2 1/16 15,000 7.88 8.25
2 9/16 2 9/16 15,000 8.50 8.50
3 1/16 1 13/16 15,000 7.86 8.69
3 1/16 2 1/16 15,000 8.16 8.91
3 1/16 2 9/16 15,000 8.78 9.16
3 1/16 3 1/16 15,000 9.44 9.44
4 1/16 1 13/16 15,000 8.69 10.25
4 1/16 2 1/16 15,000 8.97 10.47
4 1/16 2 9/16 15,000 9.59 10.72

Page2 of 3
FLANGED_STUDDED CROSSES AND TEES SLIDE RULE Run Outlet PSI
5 1/8 - 1 13/16 - 15,000

22.88

11.44
5 1/8

9.38

1 13/16

18.76

Centre to face Centre to face


Vertical Horizontal Pressure vertical run horizontal run
run outlet
Bv Bo rating HHv HHo
±0.03 ±0.03
4 1/16 3 1/16 15,000 10.25 11.00
4 1/16 4 1/16 15,000 11.69 11.69
5 1/8 1 13/16 15,000 9.38 11.44
5 1/8 2 1/16 15,000 9.63 11.63
5 1/8 2 9/16 15,000 10.25 11.88
5 1/8 3 1/16 15,000 10.94 12.18
5 1/8 4 1/16 15,000 12.38 12.75
5 1/8 5 1/8 15,000 13.50 13.50
1 13/16 1 13/16 20,000 8.94 8.94
2 1/16 1 13/16 20,000 9.25 9.53
2 1/16 2 1/16 20,000 9.84 9.84
2 9/16 1 13/16 20,000 9.56 10.28
2 9/16 2 1/16 20,000 10.16 10.59
2 9/16 2 9/16 20,000 10.91 10.91
3 1/16 1 13/16 20,000 9.94 10.91
3 1/16 2 1/16 20,000 10.53 10.22
3 1/16 2 9/16 20,000 11.28 11.53
3 1/16 3 1/16 20,000 11.91 11.91
4 1/16 1 13/16 20,000 11.12 12.66
4 1/16 2 1/16 20,000 11.72 12.66
4 1/16 2 9/16 20,000 12.47 13.28
4 1/16 3 1/16 20,000 13.09 13.66
4 1/16 4 1/16 20,000 14.84 14.84

Page3 of 3

You might also like