PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,

Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 1 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Permanent Facility
CHEMICAL- METALS &
1 Aluminium & its alloys Chromium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
2 Aluminium & its alloys Copper ASTM E 1251
ALLOYS
CHEMICAL- METALS &
3 Aluminium & its alloys Iron ASTM E 1251
ALLOYS
CHEMICAL- METALS &
4 Aluminium & its alloys Lead ASTM E 1251
ALLOYS
CHEMICAL- METALS &
5 Aluminium & its alloys Magnesium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
6 Aluminium & its alloys Manganese ASTM E 1251
ALLOYS
CHEMICAL- METALS &
7 Aluminium & its alloys Nickel ASTM E 1251
ALLOYS
CHEMICAL- METALS &
8 Aluminium & its alloys Silicon ASTM E 1251
ALLOYS
CHEMICAL- METALS &
9 Aluminium & its alloys Titanium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
10 Aluminium & its alloys Vanadium ASTM E 1251
ALLOYS
CHEMICAL- METALS &
11 Aluminium & its alloys Zinc ASTM E 1251
ALLOYS
CHEMICAL- METALS &
12 Cast Iron Aluminum IS 15338
ALLOYS
CHEMICAL- METALS &
13 Cast Iron Carbon ASTM E1999
ALLOYS
CHEMICAL- METALS &
14 Cast Iron Carbon IS 15338
ALLOYS
CHEMICAL- METALS &
15 Cast Iron Copper ASTM E1999
ALLOYS
CHEMICAL- METALS &
16 Cast Iron Copper IS 15338
ALLOYS
CHEMICAL- METALS &
17 Cast Iron Manganese IS 15338
ALLOYS
CHEMICAL- METALS &
18 Cast Iron Manganese ASTM E1999
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 2 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
19 Cast Iron Molybdenum ASTM E1999
ALLOYS
CHEMICAL- METALS &
20 Cast Iron Molybdenum IS 15338
ALLOYS
CHEMICAL- METALS &
21 Cast Iron Phosphorus ASTM E1999
ALLOYS
CHEMICAL- METALS &
22 Cast Iron Phosphorus IS 15338
ALLOYS
CHEMICAL- METALS &
23 Cast Iron Silicon ASTM E1999
ALLOYS
CHEMICAL- METALS &
24 Cast Iron Silicon IS 15338
ALLOYS
CHEMICAL- METALS &
25 Cast Iron Sulphur ASTM E1999
ALLOYS
CHEMICAL- METALS &
26 Cast Iron Sulphur IS 15338
ALLOYS
CHEMICAL- METALS &
27 Cast Iron Vanadium ASTM E1999
ALLOYS
CHEMICAL- METALS &
28 Cast Iron Vanadium IS 15338
ALLOYS
CHEMICAL- METALS &
29 Copper & its alloys Aluminium BSEN 15079
ALLOYS
CHEMICAL- METALS &
30 Copper & its alloys Antimony BSEN 15079
ALLOYS
CHEMICAL- METALS &
31 Copper & its alloys Arsenic BSEN 15079
ALLOYS
CHEMICAL- METALS &
32 Copper & its alloys Bismuth BSEN 15079
ALLOYS
CHEMICAL- METALS &
33 Copper & its alloys Iron BSEN 15079
ALLOYS
CHEMICAL- METALS &
34 Copper & its alloys Lead BSEN 15079
ALLOYS
CHEMICAL- METALS &
35 Copper & its alloys Manganese BSEN 15079
ALLOYS
CHEMICAL- METALS &
36 Copper & its alloys Nickel BSEN 15079
ALLOYS
CHEMICAL- METALS &
37 Copper & its alloys Phosphorus BSEN 15079
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 3 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
38 Copper & its alloys Silicon BSEN 15079
ALLOYS
CHEMICAL- METALS &
39 Copper & its alloys Silver BSEN 15079
ALLOYS
CHEMICAL- METALS &
40 Copper & its alloys Sulphur BSEN 15079
ALLOYS
CHEMICAL- METALS &
41 Copper & its alloys Tin BSEN 15079
ALLOYS
CHEMICAL- METALS &
42 Copper & its alloys Zinc BSEN 15079
ALLOYS
CHEMICAL- METALS &
43 Plain carbon & Low Alloy Steel Aluminium ASTM E 415
ALLOYS
CHEMICAL- METALS &
44 Plain carbon & low alloy steel Aluminium IS 8811
ALLOYS
CHEMICAL- METALS &
45 Plain carbon & Low Alloy Steel Boron ASTM E 415
ALLOYS
CHEMICAL- METALS &
46 Plain carbon & low alloy steel Boron IS 8811
ALLOYS
CHEMICAL- METALS &
47 Plain Carbon & Low alloy steel Carbon ASTM E 415
ALLOYS
CHEMICAL- METALS &
48 Plain carbon & low alloy steel Carbon IS 8811
ALLOYS
CHEMICAL- METALS &
49 Plain carbon & Low Alloy Steel Chromium ASTM E 415
ALLOYS
CHEMICAL- METALS &
50 Plain carbon & low alloy steel Chromium IS 8811
ALLOYS
CHEMICAL- METALS &
51 Plain carbon & Low Alloy Steel Cobalt ASTM E 415
ALLOYS
CHEMICAL- METALS &
52 Plain carbon & low alloy steel Cobalt IS 8811
ALLOYS
CHEMICAL- METALS &
53 Plain carbon & Low Alloy Steel Copper ASTM E 415
ALLOYS
CHEMICAL- METALS &
54 Plain carbon & low alloy steel Copper IS 8811
ALLOYS
CHEMICAL- METALS &
55 Plain Carbon & Low alloy steel Manganese ASTM E 415
ALLOYS
CHEMICAL- METALS &
56 Plain carbon & low alloy steel Manganese IS 8811
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 4 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
57 Plain carbon & Low Alloy Steel Molybdenum ASTM E 415
ALLOYS
CHEMICAL- METALS &
58 Plain carbon & low alloy steel Molybdenum IS 8811
ALLOYS
CHEMICAL- METALS &
59 Plain carbon & Low Alloy Steel Nickel ASTM E 415
ALLOYS
CHEMICAL- METALS &
60 Plain carbon & low alloy steel Nickel IS 8811
ALLOYS
CHEMICAL- METALS &
61 Plain carbon & Low Alloy Steel Niobium ASTM E 415
ALLOYS
CHEMICAL- METALS &
62 Plain carbon & low alloy steel Niobium IS 8811
ALLOYS
CHEMICAL- METALS &
63 Plain carbon & Low Alloy Steel Nitrogen ASTM E 415
ALLOYS
CHEMICAL- METALS &
64 Plain carbon & low alloy steel Nitrogen IS 8811
ALLOYS
CHEMICAL- METALS &
65 Plain Carbon & Low alloy steel Phosphorus ASTM E 415
ALLOYS
CHEMICAL- METALS &
66 Plain carbon & low alloy steel Phosphorus IS 8811
ALLOYS
CHEMICAL- METALS &
67 Plain carbon & Low Alloy Steel Silicon ASTM E 415
ALLOYS
CHEMICAL- METALS &
68 Plain carbon & low alloy steel Silicon IS 8811
ALLOYS
CHEMICAL- METALS &
69 Plain Carbon & Low alloy steel Sulphur ASTM E 415
ALLOYS
CHEMICAL- METALS &
70 Plain carbon & low alloy steel Sulphur IS 8811
ALLOYS
CHEMICAL- METALS &
71 Plain carbon & Low Alloy Steel Titanium ASTM E 415
ALLOYS
CHEMICAL- METALS &
72 Plain carbon & low alloy steel Titanium IS 8811
ALLOYS
CHEMICAL- METALS &
73 Plain carbon & low alloy steel Tungsten IS 8811
ALLOYS
CHEMICAL- METALS &
74 Plain carbon & Low Alloy Steel Vanadium ASTM E 415
ALLOYS
CHEMICAL- METALS &
75 Plain carbon & low alloy steel Vanadium IS 8811
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 5 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
76 Stainless Steel Aluminium IS 9879
ALLOYS
CHEMICAL- METALS &
77 Stainless Steel Boron IS 9879
ALLOYS
CHEMICAL- METALS &
78 Stainless Steel Carbon ASTM E 1086
ALLOYS
CHEMICAL- METALS &
79 Stainless steel Carbon IS 9879
ALLOYS
CHEMICAL- METALS &
80 Stainless Steel Chromium ASTM E 1086
ALLOYS
CHEMICAL- METALS &
81 Stainless Steel Chromium IS 9879
ALLOYS
CHEMICAL- METALS &
82 Stainless Steel Cobalt IS 9879
ALLOYS
CHEMICAL- METALS &
83 Stainless Steel Copper ASTM E 1086
ALLOYS
CHEMICAL- METALS &
84 Stainless Steel Copper IS 9879
ALLOYS
CHEMICAL- METALS &
85 Stainless Steel Manganese ASTM E 1086
ALLOYS
CHEMICAL- METALS &
86 Stainless Steel Manganese IS 9879
ALLOYS
CHEMICAL- METALS &
87 Stainless Steel Molybdenum ASTM E 1086
ALLOYS
CHEMICAL- METALS &
88 Stainless Steel Molybdenum IS 9879
ALLOYS
CHEMICAL- METALS &
89 Stainless Steel Nickel ASTM E 1086
ALLOYS
CHEMICAL- METALS &
90 Stainless Steel Nickel IS 9879
ALLOYS
CHEMICAL- METALS &
91 Stainless steel Niobium IS 9879
ALLOYS
CHEMICAL- METALS &
92 Stainless Steel Nitrogen IS 9879
ALLOYS
CHEMICAL- METALS &
93 Stainless Steel Phosphorus ASTM E 1086
ALLOYS
CHEMICAL- METALS &
94 Stainless Steel Phosphorus IS 9879
ALLOYS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 6 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- METALS &
95 Stainless Steel Silicon ASTM E 1068
ALLOYS
CHEMICAL- METALS &
96 Stainless Steel Silicon IS 9879
ALLOYS
CHEMICAL- METALS &
97 Stainless Steel Sulphur ASTM E 1086
ALLOYS
CHEMICAL- METALS &
98 Stainless steel Sulphur IS 9879
ALLOYS
CHEMICAL- METALS &
99 Stainless Steel Titanium IS 9879
ALLOYS
CHEMICAL- METALS &
100 Stainless Steel Vanadium IS 9879
ALLOYS
MECHANICAL-
101 MECHANICAL PROPERTIES Aluminium & its alloys 0.2 % Proof Stress ASTM B557
OF METALS
MECHANICAL-
102 MECHANICAL PROPERTIES Aluminium & its alloys Elongation % ASTM B557
OF METALS
MECHANICAL-
103 MECHANICAL PROPERTIES Aluminium & its alloys Tensile Strength (UTS) ASTM B557
OF METALS
MECHANICAL-
104 MECHANICAL PROPERTIES Aluminium & its alloys Yield Strength ASTM B557
OF METALS
MECHANICAL-
105 MECHANICAL PROPERTIES Aluminium & its alloys % Reduction in area ASTM B557
OF METALS
MECHANICAL-
106 MECHANICAL PROPERTIES Aluminium & its alloys % Reduction in area ASTM E8/E8M
OF METALS
MECHANICAL-
107 MECHANICAL PROPERTIES Aluminium & its alloys % Reduction in area ISO 6892 (Part 1)
OF METALS
MECHANICAL-
108 MECHANICAL PROPERTIES Aluminium & its alloys 0.2 % Proof Stress ASTM E8/E8M
OF METALS
MECHANICAL-
109 MECHANICAL PROPERTIES Aluminium & its alloys 0.2% proof stress ISO 6892 (Part 1)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 7 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
110 MECHANICAL PROPERTIES Aluminium & its alloys Elongation % ASTM E8/E8M
OF METALS
MECHANICAL-
111 MECHANICAL PROPERTIES Aluminium & its alloys Elongation % ISO 6892 (Part 1)
OF METALS
MECHANICAL-
112 MECHANICAL PROPERTIES Aluminium & its alloys Tensile strength (UTS) ASTM E8/E8M
OF METALS
MECHANICAL-
113 MECHANICAL PROPERTIES Aluminium & its alloys Tensile Strength (UTS) ISO 6892 (Part 1)
OF METALS
MECHANICAL-
114 MECHANICAL PROPERTIES Aluminium & its alloys Yield strength ASTM E8/E8M
OF METALS
MECHANICAL-
115 MECHANICAL PROPERTIES Aluminium & its alloys Yield Strength ISO 6892 (Part 1)
OF METALS
MECHANICAL-
116 MECHANICAL PROPERTIES Fastener / Bolt Tensile load for full size bolt IS 1367 (Part 3) Clause 8.2
OF METALS
MECHANICAL-
117 MECHANICAL PROPERTIES Fasteners / Nut Proof Load Test IS1367 (Part 6) Clause 8.1
OF METALS
MECHANICAL-
118 MECHANICAL PROPERTIES Fasteners / Bolt Proof load Test IS 1367 (Part 3) Clause 8.5
OF METALS
MECHANICAL-
119 MECHANICAL PROPERTIES Fasteners / Bolt Shear Strength IS 12427
OF METALS
MECHANICAL-
Tensile load under Wedge
120 MECHANICAL PROPERTIES Fasteners / Bolts IS 1367 (Part 3) Clause 8.6
loading
OF METALS
MECHANICAL-
121 MECHANICAL PROPERTIES Ferrous materials, alloys & products % Reduction in area ASTM A370
OF METALS
MECHANICAL-
122 MECHANICAL PROPERTIES Ferrous materials, alloys & products % Reduction in area ASTM E8/E8M
OF METALS
MECHANICAL-
123 MECHANICAL PROPERTIES Ferrous materials, alloys & products % Reduction in area IS 1608 part1
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 8 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
124 MECHANICAL PROPERTIES Ferrous materials, alloys & products % Reduction in area ISO 6892 (Part 1)
OF METALS
MECHANICAL-
125 MECHANICAL PROPERTIES Ferrous materials, alloys & products 0.2 % Proof Stress IS 1608 part1
OF METALS
MECHANICAL-
126 MECHANICAL PROPERTIES Ferrous materials, alloys & products 0.2 % Proof Stress ISO 6892 (Part 1)
OF METALS
MECHANICAL-
127 MECHANICAL PROPERTIES Ferrous materials, alloys & products 0.2% proof stress ASTM E8/E8M
OF METALS
MECHANICAL-
128 MECHANICAL PROPERTIES Ferrous materials, alloys & products Bend Test ASME BPVC IX
OF METALS
MECHANICAL-
129 MECHANICAL PROPERTIES Ferrous materials, alloys & products Bend Test ASTM E 290
OF METALS
MECHANICAL-
130 MECHANICAL PROPERTIES Ferrous materials, alloys & products Bend Test IS 1599
OF METALS
MECHANICAL-
131 MECHANICAL PROPERTIES Ferrous materials, alloys & products Bend Test ISO 7438
OF METALS
MECHANICAL-
Bend Test & Re- Bend Test for
132 MECHANICAL PROPERTIES Ferrous materials, alloys & products IS 1786
Reinforcement bars
OF METALS
MECHANICAL-
133 MECHANICAL PROPERTIES Ferrous materials, alloys & products Brinell Hardness 10/3000 IS 1500 (Part 1)
OF METALS
MECHANICAL-
134 MECHANICAL PROPERTIES Ferrous materials, alloys & products Brinell Hardness 10/3000 ISO 6506 (Part 1)
OF METALS
MECHANICAL-
135 MECHANICAL PROPERTIES Ferrous materials, alloys & products Brinell Hardness 5/750 Is 1500 (Part 1)
OF METALS
MECHANICAL-
136 MECHANICAL PROPERTIES Ferrous materials, alloys & products Brinell Hardness 5/750 ISO 6506 (Part 1)
OF METALS
MECHANICAL-
Charpy Impact test "V" notch (
137 MECHANICAL PROPERTIES Ferrous materials, alloys & products ISO 148
ambient to -60 degree C)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 9 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
138 MECHANICAL PROPERTIES Ferrous materials, alloys & products Elongation % ASTM A370
OF METALS
MECHANICAL-
139 MECHANICAL PROPERTIES Ferrous materials, alloys & products Elongation % ASTM E8/E8M
OF METALS
MECHANICAL-
140 MECHANICAL PROPERTIES Ferrous materials, alloys & products Elongation % IS 1608 part1
OF METALS
MECHANICAL-
141 MECHANICAL PROPERTIES Ferrous materials, alloys & products Elongation % ISO 6892 (Part 1)
OF METALS
MECHANICAL-
Flattening test (Steel pipes &
142 MECHANICAL PROPERTIES Ferrous materials, alloys & products IS 2328
tubes)
OF METALS
MECHANICAL-
Flattening test (Steel pipes &
143 MECHANICAL PROPERTIES Ferrous materials, alloys & products ISO 8492
tubes)
OF METALS
MECHANICAL-
144 MECHANICAL PROPERTIES Ferrous materials, alloys & products Rockwell Hardness HRC IS 1586 (Part 1)
OF METALS
MECHANICAL-
145 MECHANICAL PROPERTIES Ferrous materials, alloys & products Rockwell Hardness HRA IS 1586 (Part 1)
OF METALS
MECHANICAL-
146 MECHANICAL PROPERTIES Ferrous materials, alloys & products Rockwell Hardness HRA ISO 6508 (Part 1)
OF METALS
MECHANICAL-
147 MECHANICAL PROPERTIES Ferrous materials, alloys & products Rockwell Hardness HRBW IS 1586 (Part 1)
OF METALS
MECHANICAL-
148 MECHANICAL PROPERTIES Ferrous materials, alloys & products Rockwell Hardness HRBW ISO 6508 (Part 1)
OF METALS
MECHANICAL-
149 MECHANICAL PROPERTIES Ferrous materials, alloys & products Tensile Strength (UTS) ASTM E 8/E8M
OF METALS
MECHANICAL-
150 MECHANICAL PROPERTIES Ferrous materials, alloys & products Tensile strength (UTS) IS 1608 part1
OF METALS
MECHANICAL-
151 MECHANICAL PROPERTIES Ferrous materials, alloys & products Tensile strength (UTS) ISO 6892 (Part 1)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 10 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
152 MECHANICAL PROPERTIES Ferrous materials, alloys & products Yield Strength ASTM A370
OF METALS
MECHANICAL-
153 MECHANICAL PROPERTIES Ferrous materials, alloys & products Yield Strength ASTM E 8/E8M
OF METALS
MECHANICAL-
154 MECHANICAL PROPERTIES Ferrous materials, alloys & products Yield strength IS 1608 part1
OF METALS
MECHANICAL-
155 MECHANICAL PROPERTIES Ferrous materials, alloys & products Yield Strength ISO 6892 (Part 1)
OF METALS
MECHANICAL-
156 MECHANICAL PROPERTIES Ferrous materials,alloy & products 0.2% proof stress ASTM A 370
OF METALS
MECHANICAL-
157 MECHANICAL PROPERTIES Ferrous materials,alloys & products Double Shear strength IS 5242
OF METALS
MECHANICAL-
158 MECHANICAL PROPERTIES Ferrous materials,alloys & products Tensile strength (UTS) ASTM A370
OF METALS
MECHANICAL-
Charpy Impact test "V" notch (
159 MECHANICAL PROPERTIES Ferrous metal & alloys IS 1757 (Part 1)
ambient to -60 degree C)
OF METALS
MECHANICAL-
160 MECHANICAL PROPERTIES Other Non- Ferrous metals, alloys & products 0.2 % Proof Stress IS 1608 part1
OF METALS
MECHANICAL-
161 MECHANICAL PROPERTIES Other Non-Ferrous materials, alloys & products Brinell Hardness 10/3000 IS 1500 (Part 1)
OF METALS
MECHANICAL-
162 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products % Reduction in area IS 1608 part1
OF METALS
MECHANICAL-
163 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Brinell Hardness 10/3000 ISO 6506 (Part 1)
OF METALS
MECHANICAL-
164 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Brinell hardness 5/750 IS 1500 (Part 1)
OF METALS
MECHANICAL-
165 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Brinell Hardness 5/750 ISO 6506 (Part 1)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 11 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
166 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Elongation % IS 1608 part1
OF METALS
MECHANICAL-
167 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Rockwell Hardness HRBW IS 1586 (Part 1)
OF METALS
MECHANICAL-
168 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Rockwell Hardness HRBW ISO 6508 (Part 1)
OF METALS
MECHANICAL-
169 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Tensile strength (UTS) IS 1608 part1
OF METALS
MECHANICAL-
170 MECHANICAL PROPERTIES Other Non-Ferrous metals, alloys & products Yield Strength IS 1608 part1
OF METALS
MECHANICAL-
171 MECHANICAL PROPERTIES Reinforcement Bars Mass per meter IS 1786
OF METALS
MECHANICAL-
172 MECHANICAL PROPERTIES Welded test specimens Fracture test ASME BPVC IX
OF METALS
MECHANICAL-
173 MECHANICAL PROPERTIES Welds & welded test specimens Tensile Strength (UTS) ASME BPVC IX
OF METALS
MECHANICAL-
174 Aluminium materials, alloys & products Macro structural analysis IS 12573
METALLOGRAPHY TEST
MECHANICAL-
175 Aluminium materials, alloys & products Micro structural analysis ASM metal handbook vol. 9
METALLOGRAPHY TEST
MECHANICAL- Type, size and distribution of
176 Cast Iron & Products IS 7754
METALLOGRAPHY TEST graphite flakes & nodules
MECHANICAL-
177 Copper material, alloys & products Micro structural analysis ASM metal handbook vol. 9
METALLOGRAPHY TEST
MECHANICAL- Case depth measurement by
178 Ferrous materials, alloys & products IS 6416
METALLOGRAPHY TEST Macroscopic method
MECHANICAL- Case Depth measurement by
179 Ferrous materials, alloys & products IS 6416
METALLOGRAPHY TEST microscopic method
Estimating depth of Complete
MECHANICAL-
180 Ferrous materials, alloys & products Decarburization by microscopic ASTM E 1077 (01)
METALLOGRAPHY TEST
method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 PARTH METALLURGICAL SERVICES, B-15/16, MIDC, HINGNA ROAD, NAGPUR,
Laboratory Name :
MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-5451 Page No 12 of 12
Validity 29/11/2021 to 28/11/2023 Last Amended on 04/01/2022

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Estimating depth of Complete
MECHANICAL-
181 Ferrous materials, alloys & products Decarburization by microscopic IS 6396
METALLOGRAPHY TEST
method
Estimating depth of partial
MECHANICAL-
182 Ferrous materials, alloys & products decarburization by microscopic IS 6396
METALLOGRAPHY TEST
method
Estimating Partial depth of
MECHANICAL-
183 Ferrous materials, alloys & products Decarburization by Microscopic ASTM E 1077 (01)
METALLOGRAPHY TEST
method
MECHANICAL- Estimation of grain size by
184 Ferrous materials, alloys & products ASTM E 112
METALLOGRAPHY TEST comparison method
MECHANICAL- Estimation of grain size by
185 Ferrous materials, alloys & products IS 4748
METALLOGRAPHY TEST comparison method
MECHANICAL- Estimation of Grain size by
186 Ferrous materials, alloys & products ISO 643
METALLOGRAPHY TEST comparison method
MECHANICAL- Inclusion rating A to D by
187 Ferrous materials, alloys & products ASTM E 45 (Method E)
METALLOGRAPHY TEST microscopic method
MECHANICAL- Inclusion rating A to D by
188 Ferrous materials, alloys & products IS 4163
METALLOGRAPHY TEST microscopic method
MECHANICAL- Inclusion rating A to D by
189 Ferrous materials, alloys & products ISO 4967
METALLOGRAPHY TEST microscopic method
MECHANICAL-
190 Ferrous materials, alloys & products Macro structural Analysis ASTM E 340
METALLOGRAPHY TEST
MECHANICAL-
191 Ferrous materials, alloys & products Macro structural Analysis ASTM E 381
METALLOGRAPHY TEST
MECHANICAL-
192 Ferrous materials, alloys & products Macro structural analysis IS 11371
METALLOGRAPHY TEST
MECHANICAL-
193 Ferrous materials, alloys & products Macro structural Analysis IS 13015
METALLOGRAPHY TEST
MECHANICAL-
194 Ferrous materials, alloys & products Micro structural analysis ASM Metal handbook Vol. 9
METALLOGRAPHY TEST

This is annexure to 'Certificate of Accreditation' and does not require any signature.