Fieldbus Power Hub, Motherboard for Gateway and Power Supply Modules MBHC-FB-4.

GT*

Features Assembly

• 4 segments, simplex, individual modules per segment

• For PROFIBUS PA
• For gateway and power supply modules
• High-power trunk: Live work on devices in any hazardous
area
• Optional advanced diagnostics
• Installation in Zone 2/Class I, Div. 2
• Spring terminals or screw terminals selectable

Function

The motherboard is a system component of the

FieldConnex®Power Hub, a modular fieldbus power supply for
4 segments. It is the wiring interface for one gateway,
one advanced diagnostic module, and 4 power supply
modules. The power supply supports explosion protection,
e. g., the high–power trunk for long cable lengths and high
device counts. The Power Hub supports advanced
diagnostics for fast fieldbus commissioning and online
monitoring.
Sockets for all modules enable simple installation and
replacement without tools. Wire connections can be selected
as spring terminals or screw terminals.
The motherboard supports a choice of gateways for different
host protocols. A PROFIBUS PA master for each segment
enables short bus cycle times. The DCS can access the
advanced diagnostic module directly via the gateway without
additional wiring or configuration.
R R

This design allows the most compact cabinet layout. Excellent

availability and a long service life are achieved through the
following features: A passive impedance filter per segment
without active electronic components, a high–availability
fieldbus termination, and plugs with retaining screws.

Connection
t177582_eng.xml

Diagnostic Shield/
Alarm Bus Host Screen
+- GND
-+

+-S +-S +-S +-S

Bulk
Date of issue 2017-08-08

Address
T
x10 x100

Trunk
T 1 ... 4
x1

T
Bulk
-+
Release date 2017-08-08 13:37

T
+-
Alarm Diagnostic
Bus

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
[email protected]
Germany: +49 621 776 2222
[email protected]
Singapore: +65 6779 9091
[email protected]
1
 Technical data MBHC-FB-4.GT*

General specifications
Design / Mounting Motherboard based
Supply
Connection redundant
Rated voltage Ur 19.2 ... 35 V SELV/PELV
Rated current Ir 12 A
Power dissipation typ. 0.4 W per segment
Fieldbus interface
Number of segments 4 simplex
Terminating resistor 100 Ω integrated
Indicators/operating means
Fault signal VFC alarm 1 A, 50 V DC, normally closed
Rotary switch bus addressing, gateway-specific
Galvanic isolation
Fieldbus segment/Fieldbus segment functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff
Fieldbus segment/Supply functional insulation acc. to IEC 61010, rated insulation voltage 50 Veff
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 61326-1:2013
Standard conformity
Electromagnetic compatibility NE 21:2011
Degree of protection IEC 60529
Fieldbus standard IEC 61158-2
Shock resistance EN 60068-2-27
Vibration resistance EN 60068-2-6
Ambient conditions
Ambient temperature -40 ... 70 °C (-40 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Relative humidity < 95 % non-condensing
Shock resistance 10 g , 11 ms
Vibration resistance 1 g , 10 ... 150 Hz
Pollution degree max. 2, according to IEC 60664
Corrosion resistance acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type plug-in terminals , spring terminal and screw terminal
Core cross-section 2.5 mm2
Housing material Polycarbonate
Degree of protection IP20
Mass approx. 540 g
Mounting DIN mounting rail
Data for application in connection
with hazardous areas
Certificate TÜV 15 ATEX 7735 X
Marking ¬ II 3G Ex ec IIC T4 Gc
Directive conformity

Directive 2014/34/EU EN 60079-0:2012 , EN 60079-7:2015 , EN 60079-11:2012

t177582_eng.xml

International approvals
IECEx approval IECEx TUR 16.0007X
Approved for Ex ec IIC T4 Gc
Certificates and approvals
Marine approval pending
Date of issue 2017-08-08

General information
Supplementary information Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be
observed where applicable. For information see www.pepperl-fuchs.com.
Release date 2017-08-08 13:37

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
[email protected]
Germany: +49 621 776 2222
[email protected]
Singapore: +65 6779 9091
[email protected]
2
 Technical data MBHC-FB-4.GT*

System Component Overview

169 mm (6.6")
39 mm
(1.5")
150 mm (5.9") 135 mm (5.3")
1
180 mm (7.1")
11

10
2

7
4 3

8
4 4

9
4 5

8
4 6

7
4

Description:
1 Motherboard MBHC-FB-4.GT
2 Gateway module
3 Diagnostic module
4 Power supply modules (x 4)
5 Trunk connection
6 Shielding/grounding kit for trunk shields, optional accessory
7 Connections: Volt-free contact alarm and diagnostic bus (x 2)
8 Connection for bulk power supply (x 2)
9 Rotary switches for gateway addressing x1, x10, x100
10 Shield connection
11 Mounting slot for DIN rail mounting

Accessories

Type Code Description

t177582_eng.xml

ACC-MB-HDC Diagnostic link cable, length 6 cm

ACC-MB-HSK Shielding/grounding kit
ACC-LBF-EB.4 Earth bar for surge protectors
TPH-LBF-IA1.36.DE* Surge protector
Date of issue 2017-08-08

Available Product Variants

Type Code Description

MBHC-FB-4.GT Motherboard with pluggable screw terminals
Release date 2017-08-08 13:37

MBHC-FB-4.GT.1 Motherboard with pluggable spring terminals

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
[email protected]
Germany: +49 621 776 2222
[email protected]
Singapore: +65 6779 9091
[email protected]
3
 Technical data MBHC-FB-4.GT*

Compatible Power Supply Modules

HCD2-FBPS-1.23.500 HCD2-FBPS-1.500
Power Output
Voltage (V) 21 ... 23 28 ... 29.5
Current (mA) 500 500
Limit U0 (V) 24 30
Device in ... Type of Protection Required Installation Components
Zone 0/Div. 1 Intrinsically safe Ex ia „ FieldBarrier
Zone 1/Div. 1 Intrinsically safe Ex ia „ FieldBarrier
Zone 1/Div. 1 Flameproof Ex d „ Segment Protector R-SP-E12 or any
Segment Protector installed in Zone 2
Zone 2 Intrinsically safe Ex ic (Entity) „ „ Selected Segment Protectors
Div. 2 Non-incendive „ „ Any Segment Protector; power module
selection depends on voltage of field device
Safe Area No specific type of protection „ Segment Protector recommended

For more details on the power supply modules see respective data sheets.

Diagnostic module selection

The following diagnostic modules are compatible with this motherboard.

Type code Description
HD2-DM-B Diagnostic Module, basic version
HD2-DM-A Diagnostic Module, advanced version
HD2-DM-A.RO Diagnostic Module, advanced version, relay output

The stationary and mobile Advanced Diagnostic Module (ADM) and related components provide measurement tools for the
fieldbus physical layer. The ADM monitors many quality indicating values of the fieldbus physical layer. An expert system, which
is included, analyzes the values and issues easy to understand messages indicating cause and remedy. The ADM is
recommended for:
- Faster commissioning and plant start-up: Installation issues are known and corrected before loop check commences
- Reliable operation through online monitoring: The quality of the physical layer and installation is monitored making
fieldbus a manageable asset
- Efficient troubleshooting: An expert system guides the user through issues and faults in the fieldbus installation
Many other tools are included that enhance fieldbus installation and upkeep. Please see datasheet on HD2-DM-A.

Available PROFIBUS and PROFINET Power Hub System Components

The following list describes all available PROFIBUS and PROFINET Power Hub system components as an overview and quick
reference beyond the component described in this datasheet.
Type Code Description
HD2-GTR-4PA PROFIBUS DP to PROFIBUS PA gateway module, 4 PROFIBUS PA segments.
HD2-GTR-4PA.PN PROFINET to PROFIBUS PA gateway module, 4 PROFIBUS PA segments.
HCD2-FBPS-1.500 Power supply module 30 V/500 mA.
HCD2-FBPS-1.23.500 Power supply module 23 V/500 mA.
t177582_eng.xml

HD2-DM-A* Advanced physical layer diagnostic module.

HD2-DM-B Basic diagnostic module.
MB-FB-GTR1 Motherboard for gateway redundancy, slots for 2 gateway modules.
MBHC-FB-4.GT* Compact Power Hub motherboard for 4 segments,
slots for 4 power supply modules, 1 diagnostic module, and 1 gateway module.
Date of issue 2017-08-08

Connector options: Removable screw terminals or spring terminals.

MBHC-FB-4.HSC* Compact Power Hub motherboard for 4 segments,
slots for 4 power supply modules and 1 diagnostic module.
Connector options: Removable screw terminals or spring terminals.
MBHC-FB-4R.HSC* Compact Power Hub motherboard for 4 redundant segments,
slots for 8 power supply modules and 1 diagnostic module.
Connector options: Removable screw terminals or spring terminals.
Release date 2017-08-08 13:37

KT-MB-FB-D-4R.GEN DART high-density Power Hub with generic interface for 4 redundant segments,
slots for 8 power supply modules with 1 diagnostic module.

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
[email protected]
Germany: +49 621 776 2222
[email protected]
Singapore: +65 6779 9091
[email protected]
4
 Technical data MBHC-FB-4.GT*

Applicable Combinations of Gateway Motherboards, System Modules with Motherboards

GW MBs GW Modules Power Supplies Diagnostic Modules

HCD2-FBPS-1.23.500

HCD2-FBPS-1.500
HD2-GTR-4PA.PN
HD2-GTR-4PA
MB-FB-GTR1

HD2-DM-A*

HD2-DM-B
MBHC-FB-4.HSC* x x x x x
Power Hub Kits

MBHC-FB-4R.HSC* x x x x x
MBs or

KT-MB-FB-D-4R.GEN x x x

MB-FB-GTR1 x x
GW MBs

MBHC-FB-4.GT x x x x x x

For more details on the components see respective datasheets.

Example: Simplex Power Hub for 4 Segments

The table lists the components of a typical Power Hub.

Optional accessories are also listed.

No. Product Component Model Type/Order Number

1 Motherboard MBHC-FB-4.GT
4 Power supply modules HCD2-FBPS-1.500
4 Surge protectors TPH-LBF-IA1.36.DE*
1 Earth bar for surge protectors ACC-LBF-EB.4
1 Advanced diagnostic module HD2-DM-A
1 PROFIBUS or PROFINET gateway module HD2-GTR-4PA*
t177582_eng.xml
Date of issue 2017-08-08
Release date 2017-08-08 13:37

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group
www.pepperl-fuchs.com
USA: +1 330 486 0002
[email protected]
Germany: +49 621 776 2222
[email protected]
Singapore: +65 6779 9091
[email protected]
5