N30U DIGITAL PANEL METER

• Measurement: temperature, resistance, standard signals.

• 3-colour display (14 mm high), programmable in 3 ranges
FeATUReS: of the measured value.
• Meter programming from keyboard or through the RS-485
LPConfig interface by means of the free LPConfig program.
Program • 4 alarm outputs with signalling on LED diodes,
working in 6 different modes.
MOD • Conversion of any measured value into an analog signal
BUS RTC 0/4...20 mA or 0...10 V.
21 points
• Storage of minimal and maximal values for all measured
Password
charact.
protection quantities.
• Supply of object transducers (ver. N30U-1XXXXXXX).
• 21-point individual characteristic for the measured value.
IP65

Example of Application
INPUTS: Measurement and
Alarms visualization of analog
RS485, standard signals: Pt100,
Modbus TC, 20 mA, 60 mV, 10 V.
Wireless transmission
SM7 modules
HMI panel Measured parameters
N30U
-10..10 -20..20 digital
are transmitted to the
V mA meter HMI operator panel
through radio modules.
RS485/USB
converter PC Computer/programming
60 mV (e.g. PD10) using the LPConfig
Temperature program
Pt100 probe
oUTPUTS: Shunt

0 .. 20 0..10
mA V Input
Input kind Maximal measuring range Class Additional error
Pt100 - due to automatic com-
Pt500 -205...855°C (-200...850°C) pensation of the reference
junction temperature
Pt1000  1°C
2x 400 Ω 0...410 Ω (0...400 Ω)
4000 Ω 0...4010 Ω (0...4000 Ω) - due to automatic com-
Thermocouple of J type -200..1200 °C (-100..1200 °C) pensation of the cable resi-
Thermocouple of K type -200..1370 °C (-100..1370 °C) stance for thermoresistors
RS 0.1  0,5°C
Thermocouple of N type -200..1300 °C (-100..1300 °C)
485 Thermocouple of E type -200..1000 °C (-100..1000 °C)
- due to automatic com-
Thermocouple of R type -50..1768 °C (-50..1760 °C) pensation of the cables for
GAlVANIC Thermocouple of S type -50..1768 °C (-50..1760 °C) resistance measurement
ISolATIoN: Voltage input 0...10 V -13...13 V (-10...10 V)  0,2Ω
Current input -24...24 mA (-20...20 mA)
- from temperature changes
Voltage input -10...63 mV (0...60 mV) 100 % of the class / 10 K
Current time 00.00...23.59 0.5 sec./ 24h

Outputs
RS Output kind Properties Remarks
Supply 485 • 2 x relays, voltageless NOC contacts
Relay load-carrying capacity 250 V a.c./ 0.5 A a.c.
output • 2 x relays, voltageless switched contacts
Export department:
+48 68 45 75 139/ 233/ load-carrying capacity 250 V a.c./ 0.5 A a.c.
321/ 386 • current programmable 0/4..20mA, Error of analog output: 0.2% of the set range
Fax: +48 68 32 54 091 Analog
load resistance ≤ 500 Ω Additional error from temperature changes: 50% of the
e-mail: [email protected] output
• voltage programmable 0...10 V load resistance ≥ 500 Ω class/10K
OC output • typu OC, passive npn, 30 V d.c./30 mA Voltageless output
Auxiliary
LUMEL S.A. • 24 V d.c./ 30mA only for meter version: N30U-1XXXXXXX
supply
ul. Sulechowska 1
65-022 Zielona Góra
POLAND
Digital Interface
WWW.LUMEL.COM.PL Interface type transmission protocol modes baud rates
RS-485 MODBUS RTU 8N2, 8E1, 8O1, 8N1 4.8, 9.6, 19.2, 38.4, 57.6, 115.2 kbit/s
 N30U DIGITAL PANEL METER
External Features
5 digit LED display -
three-color display (colour changes depending on
Readout field indication range -19999..99999
displayed value): red, green, orange
digit height: 14 mm
Weight < 0.2 kg See Also:
Dimensions 96 ´ 48 ´ 93 mm Panel cut-out: 92+0,6 ´ 45+0,6 mm
Protection grade (acc. to EN 60529) from frontal side: IP65 from rear side: IP 10
Rated Operating Conditions
Supply voltage 85...253 V a.c. (40...400 Hz) or d.c., power consumption < 6 VA
Free LPConfig
20...40 V a.c. (40...400 Hz), 20...60 V d.c. software for easy
Temperature ambient: -25...23...55°C storage: -30...70°C programming
Relative humidity 25...95% condensation inadmissible of products.
Operating position any
External magnetic field 0...400 A/m

Safety And Compatibility Requirements

Noise immunity acc. to EN 61000-6-2
Electromagnetic compatibility
Noise emissions acc. to EN 61000-6-4
Isolation between circuits basic
Pollution grade 2
Installation category III
acc. to EN 61010-1
for the supply circuit: 300 V
Maximal phase-to-earth operating voltage
for remaining circuits: 50 V
Altitude above sea level < 2000 m KD7 recorder with
MODBUS master
Connection Diagrams protocol for recording
data measured by
N30U.

Shunts for
measurement DC
Supply Supply Supply current from 5A up
to 15 kA.

Fig. 1 Description of signals on connection Fig. 2 Ways of the meter connection.

strips.

Ordering
Table 1. Ordering codes: Table 2. Codes of highlighted unit:
N30U - X X XX XX X X Code Unit Code Unit Code Unit
Supply: 00 lack of unit 20 kVAh 40 szt.
85...253 V a.c./d.c. 1 01 V 21 MVAh 41 imp
20...40 V a.c., 20...60 V d.c. 2 02 A 22 Hz 42 rps
Additional outputs: 03 mV 23 kHz 43 m/s
lack 0
04 kV 24 Ω 44 l/s
OC output, RS-485, analog outputs 1
05 mA 25 kΩ 45 obroty/min
OC output, RS-485, analog outputs
switched-over relay outputs 2 06 kA 26 °C 46 rpm
Unit: 07 W 27 °F 47 mm/min
unit code acc. to the table 2 XX 08 kW 28 K 48 m/min
Version: 09 MW 29 % 49 l/min
standard 00
10 var 30 %RH 50 m3/min
custom-made* XX
11 kvar 31 pH 51 pcs/h
Language:
Polish P 12 Mvar 32 kg 52 m/h
Export department:
English E 13 VA 33 bar 53 km/h +48 68 45 75 139/ 233/
other* X 14 kVA 34 m 54 m3/h 321/ 386
Acceptance tests: 15 MVA 35 l 55 kg/h Fax: +48 68 32 54 091
without extra requirements 0 e-mail: [email protected]
16 kWh 36 s 56 l/h
with an extra quality inspection certificate 1
17 MWh 37 h
acc. to customer’s request* X
18 kvarh 38 m3 XX on order*
Order example: The code N30U - 1 0 26 00 E 0 means LUMEL S.A.
19 Mvarh 39 obroty
N30U - programmable N30U digital panel meter ul. Sulechowska 1
1 - supply: 85...253 V a.c./d.c.
0 - lack of additional outputs 65-022 Zielona Góra
26 - unit "°C" acc. to tabel 2 * - after agreeing with the manufacturer POLAND
00 - standard option
E - English language WWW.LUMEL.COM.PL
0 - without extra requirements
N30U-19A/2