Scribd
Upload
89 views

Guideline Ta2 Engine Grader 14M-3

This document provides guidelines for grading the performance of a steering system. It lists 6 items to check including cooling system temperature, engine speed, fuel system pressure, engine oil pressure, and exhaust temperature. Specifications are provided for acceptable measurements of each item using various tools like a thermometer, tachometer, and pressure gauges at both low and high engine speeds and idle conditions.

Uploaded by

Muhamad Dwi Cahyono
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
89 views

Guideline Ta2 Engine Grader 14M-3

This document provides guidelines for grading the performance of a steering system. It lists 6 items to check including cooling system temperature, engine speed, fuel system pressure, engine oil pressure, and exhaust temperature. Specifications are provided for acceptable measurements of each item using various tools like a thermometer, tachometer, and pressure gauges at both low and high engine speeds and idle conditions.

Uploaded by

Muhamad Dwi Cahyono
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GUIDELINE TA2 STEERING SYSTEM GRADER 14M3/16M(E9S)

NO. ITEM PERFORMANCE TOOLS CONDITION SPECIFICATION REMARKS/PICTURE


1 Cooling system Temperature THERMOMETER Engine Coolant Temperature
Different Temperature 10-20 C

2 Engine Speed Tachometer


Monitor High Idle 1975 RPM
Low Idle 830 Rpm

3 Fuel System Pressure *Pressure gauge Gp (0 to 3,445 kPa) Low Idle 538 kPa (78 psi)
(0 to 500 psi)) High Idle 641 kPa (93 psi)

4 Engine Oil Pressure *Pressure gauge Gp (0 to 3,445 kPa) 1800 rpm Min. 275 to 414 kPa (40 to 59 psi)
(0 to 500 psi)) low idle rpm (600 to 800 rpm) Min.68 kPa (10 psi).

5 Exhaust Temperature Termometer Cylinder #1 (TC stall condition).


Cylinder #2 (TC stall condition).
Cylinder #3 (TC stall condition).
Cylinder #4 (TC stall condition).
Cylinder #5 (TC stall condition).
Cylinder #6 (TC stall condition).

You might also like