The ordinary

function and
cases
VERSION 1.2 2021-08

Zhida wang
WWW.ZYCOO.COM
 the contents
The installation of a virtual machine ..................................................................................3

How to make a system disc .....................................................................................................6

How to change the server IP ..................................................................................................7

How to change the time zone ............................................................................................ 10

How to add a dispatch user ................................................................................................. 11

How to set a dispatch phone .............................................................................................. 12

The chosen of video resource for IV03/IA03 .............................................................. 13

PRESS-to-Talk ............................................................................................................................... 13

How to start a meeting........................................................................................................... 14

Audio Collection(eg:X10) ....................................................................................................... 15

How to use P2P ........................................................................................................................... 16

How to use Anoymous Call .................................................................................................. 19

How to add a camera .............................................................................................................. 21

Error 2 ............................................................................................................................................... 22

The using of NAT function .................................................................................................... 23

The server internal error......................................................................................................... 24

How to make a schedule ....................................................................................................... 24

the configuration of the hot-standby function ......................................................... 25

IP Audio Center Integrate PBX............................................................................................ 28

How to solve the playing of MP3 ...................................................................................... 32

1 | 50
How to use the interface of API ......................................................................................... 33

How to use Auto Provision(Static Provisioning Server) ........................................... 35

How to use Auto Provision(Dynamic Provisioning Server) ..................................... 39

How to use Auto Provision(the method of HTTP) ...................................................... 42

How to use Auto Provision(the method of HTTPS) ................................................... 45

How to use Modbus ................................................................................................................. 47

How to use Multicast ............................................................................................................... 49

2 | 50
The installation of a virtual machine

3 | 50
Case1: the success page has no IP
【solution】reboot the machine
Case2: using the ip in the success page, the visit is failure
【solution】check the bridge is if via the correct net-card

4 | 50
Case3:the machine doesn’t support the virtualizing real mode

【solution】edit this file，C:\ProgramData\VMware\VMware Workstation\config.ini

monitor.allowLegacyCPU = "true"

Case4: using the software of VirtulBOX, there has no the type of Centos

Case5: using the software of VirtualBox, the installation is not to the ending

【solution】when the installation is over，the normal time is about half an hour, you

should remove the ISO and reboot the virtual Machine.

5 | 50
How to make a system disc
1. Install the tool software

https://www.zycoo.com.cn/downloads/tools/balenaEtcher-Setup-latest.exe
2. Download the ISO of IPAC
https://www.zycoo.com.cn/downloads/iso/Zycoo-IAC-x86_64-Full-KS_latest.iso
3. Plug in the U-disc and begin to make the disc

4. Waiting the ending of the flash

【TIPS】if you the IP Audio Center on a virtual machine or on the cloud server, you need not

to make a system disc。

6 | 50
How to change the server IP

The solution of No 1

1、visit the 9090 page or enter the machine

2、enter the machine

3、edit the file and reboot the system

7 | 50
The solution of No 2

1、visit the 9090 page

2、click the Networking and edit the IP

8 | 50
9 | 50
How to change the time zone

1. visit the 9090 page

2. edit the time

【TIPS】

10 | 50
How to add a dispatch user

11 | 50
How to set a dispatch phone

12 | 50
The chosen of video resource for IV03/IA03

PRESS-to-Talk

13 | 50
How to start a meeting

14 | 50
Audio Collection(eg:X10)

15 | 50
How to use P2P

The case:
Use the first X10 with an audio inputting, the other X10 begin to call the

former and broadcast its inputting, the following is the solution

一、 The callee

16 | 50
二、 The caller

17 | 50
【TIPS】in this case, you need not join the IP Audio Center, the two devices can begin a

session。

18 | 50
How to use Anoymous Call

The case:
Use the IA03 to call the phone by Press-to-Talk, and the phone can call the

IA03 by the function key, the following is the solution.

一、 The setting of IA03

19 | 50
二、 The setting of the Phone

【TIPS】

1. in this case, you can dial “192.168.17.172” directly, for the dot use the * for substitute
2. the method of P2P, you need not own a server for communication

20 | 50
How to add a camera

【TIPS】

1. The format of RTSP depends on your camera’s type, you should look the introduction
2. You should test the video by the software of VLC before you add a camera

21 | 50
Error 2

【TIPS】

1. when the power is off，the devices is restarting，Error 2 may occur

2. the port mapping is incomplete(you want to visit PA in public)，Error 2 may occur
3. the license is not activated or effective，Error 2 may occur

4. change an account before you have ever registered, Error 2 may occur

【TIPS】in this case, you can use the device liking before ,only paging maybe is not in use

22 | 50
The using of NAT function

【TIPS】

1. you may need to configurate the mapping of the ports used in our PA in your

router

UTP：554,5060,10001~12000

TCP：80,443,554,1883,8000,8001,8089

2. this function is for our PA could be visited in the public internet

3. IF the server in the cloud owns the mapping function, we needn’t open the

NAT of the IPAC in this page

How to
configurate NAT.docx

23 | 50
The server internal error

【TIPS】

1. In the updating, if the version is widely different from the old, this error maybe

occurs.

2. the solution is to reboot & reset

How to make a schedule

24 | 50
the configuration of the hot-standby function

1. visiting the page of 9090

2. To STOP the service of NetworkManager.service

25 | 50
3. The configuration of the primary server

26 | 50
4. The configuration of the secondary server

【TIPS】

1. using the virtual IP provides services, even one of the two machines is broken down ,the
system can go on working normally
2. The configuration of the secondary server must be done after the primary server is ready,
otherwise the system would be in the disordered state
3. The operations of Enable option on the two hosts must be consistent, for example: you
close the Enable option in the second, you must close the Enable option in the primary
once. Otherwise, a prompt of inconsistent secret key will pop up

27 | 50
IP Audio Center Integrate PBX

[case]using the phone of the existing PBX, we can send the order by DSS method to
make the IPAC start a task of dial number, eg:888,begin to play the music。

一、 The setting of PBX

28 | 50
【TIPS】in the example, when you dial the no like 8***, the system will use the trunk of PA

29 | 50
二、 The setting of Audio Center

30 | 50
【NOTE】

In the IPAC, executing a task of dial number need to add the prefix ，starting a task
use ,ending a task use “*12”

三、 The setting of Phone

31 | 50
【TIPS】close the Smart DID, if not , maybe the IPX does not work normally

How to solve the playing of MP3

【TIPS】

1. Some music is different from our default setting, you should convert its sampling rate to
44.1K. otherwise, the things maybe occurs that the music is playing with no sound or
discontinuously

32 | 50
How to use the interface of API
From the version of 1.08, IPAC provide the interface of API. By this, you can use the devices
directly, not via the server, the following is an example.

The case:
A phone use IA03 to play music by API

一、 The target

1) Login the page of the device

2) Open the API that you want to use

33 | 50
 3) The detail of the method

二、 The setting of the phone

三、 USAGE
Dialling the FUNCTION KEY, you can hear the music of the IA03

【TIPS】

1. The phone should support the function of URL

2. Using the API means to use the device without the server’s dispatching, only your
dispatching devices have the interface of URL

34 | 50
How to use Auto Provision(Static Provisioning Server)
Using this function, you need a server(eg:TFTP). In the server，you put your configuration
of the devices and edit them on it, the following is the steps

1. Build a server of TFTP

a) yum install tftp-server -y

b) systemctl start tftp.service

c) check the port of TFTP

d) download the configuration

35 | 50
 e) edit the configuration

2. Put the configuration

a) Open the transfer tool, like the WinSCP

b) Upload the edited file to the server

36 | 50
3. Check the configuration on the server

4. Fill the TFTP’s IP

5. Reboot

a) Before rebooting

37 | 50
 b) After rebooting

【TIPS】

1. The service of tftp.service is alive on the TFTP server

2. The configuration on the TFTP server is newer the device’s , after rebooting it will replace
the old

38 | 50
How to use Auto Provision(Dynamic Provisioning Server)

If you have zycoo’s PBX ,you need not to set up a TFTP server specially, only opening the
DHCP option 066, the following is the steps
1. Open the DHCP

2. Download the configuration

3. Edit the configuration

39 | 50
4. Upload the configuration

5. Reset the device

6. Query the device’s new IP

7. Reboot the device

40 | 50
8. Check the information

【TIPS】

1. The PBX support TFTP

2. The PBX and all the devices are the same network
3. The configuration on the TFTP server is newer the device’s , after rebooting it will replace
the old

41 | 50
How to use Auto Provision(the method of HTTP)
1. Login the PBX’s background

2. Start the service of HTTP

cd /srv/tftpboot;
nohup python -m SimpleHTTPServer 8999 &

3. Visit the WEB

4. Upload the configuration

42 | 50
5. Fill the information

6. Reboot

a) Before rebooting

43 | 50
 b) After rebooting

【TIPS】

1. The service of HTTP is alive

2. The configuration on the server is newer the device’s , after rebooting it will replace the
old
3. If you don’t have a PBX as the server, you need to build a HTTP server by yourself

44 | 50
How to use Auto Provision(the method of HTTPS)
1. Upload the configuration

2. Check the file

3. Fill the information

45 | 50
4. Reboot the device

a. Before rebooting

b. After rebooting

【TIPS】

1. The directory of the configuration on the server

2. The configuration on the server is newer the device’s , after rebooting it will replace the
old
3. If you don’t have a PBX as the server, you need to build a HTTPS server by yourself

46 | 50
How to use Modbus
1. Open the function in the server

2. Login the dispatch console

3. Make a task that you want to achieve

47 | 50
4. Visit the Modbus setting

5. Add the setting

In this case ,IPAC get the signal of the Modbus device and invoke the dial number task of
1234 starting and ending

【TIPS】

1. Using the Modbus, you can accept more inputting information from different system, do
more work and achieve better
2. Using the Modbus, watch to check the modbus device’s link status

48 | 50
How to use Multicast

The case:

Use the phone to call many devices, the following is the solution

一、 The callee

【TIPS】if you have many devices, you can make the same setting

49 | 50
二、 The caller

【TIPS】you dial the function key, you can make a multicast to many devices

50 | 50