Scribd
Upload
481 views

Phoenixcard: Manual Document/4.1.2

The PhoenixCard software manual describes: 1. How to start the PhoenixCard software and its user interface for burning SD cards. 2. The software allows users to choose different card types (e.g. product, startup) and firmware files to burn onto SD cards inserted into the computer. 3. The burning process involves selecting the card drive, burning type, and starting the burn which is displayed in the information list. Warnings are provided if burns fail.

Uploaded by

Jodete Mendonça
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
481 views

Phoenixcard: Manual Document/4.1.2

The PhoenixCard software manual describes: 1. How to start the PhoenixCard software and its user interface for burning SD cards. 2. The software allows users to choose different card types (e.g. product, startup) and firmware files to burn onto SD cards inserted into the computer. 3. The burning process involves selecting the card drive, burning type, and starting the burn which is displayed in the information list. Warnings are provided if burns fail.

Uploaded by

Jodete Mendonça
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 13

PhoenixCard

Manual Document/4.1.2
第 1 页 共 13 页

Document history
Version Date Author Description
4.0.0 2015-12-01 Sam Liu
4.1.1 2017-03-01 zhubin
4.1.2 2019-04-15 shanqiu 1. Update the ‘refresh drive’ info.
第 2 页 共 13 页

Contents
PhoenixCard.................................................................................................................................................................. 1
Manual Document/4.1.2............................................................................................................................................ 1
Contents ...................................................................................................................................................................... 2
1.
. Start up.................................................................................................................................................................3
2.
. Software description........................................................................................................................................ 4
2.1. Profile......................................................................................................................................................... 4
2.2. Software UI................................................................................................................................................ 4
3.. Operation of burning card.........................................................................................................................................7
4.. Restore the card.......................................................................................................................................................11
5.. Refresh Drive.......................................................................................................................................................... 12
第 3 页 共 13 页

1. Start up
There are two ways to start the software

A．Start from APST

B． Start In Foulder
Execute the application PhoenixCard.exe ，
第 4 页 共 13 页

2. Software description

2.1.Profile

The PhoenixCard software is used to write the SD card reader into the SD card. Users can
choose different patterns of SD card will burn written production mode or is startup mode,
programming is completed can use burn written SD card of production equipment or start

2.2. Software UI
PhoenixCard UI as below

1）．
Mouse click the button to pop up the IMG file selection dialog box, users can choose to burn the need to
burn the firmware file。

2) ．
Here are three types of production cards (Product, Start up, Key Card)
第 5 页 共 13 页

Select the card production burn for mass production of the SD card；

Select "card start" burn for the start of the SD card。

Select the "Key Card" for the production of the burning serial number tool for the SD card

3）Equipment list

The equipment list will automatically insert TF card mobile storage equipment, all the enumeration to
the list, for the user to choose writing. Users only need to write the corresponding letter on the card you can
check. (suggest not to burn the card or U disk please pull out)
Note: this software can also write to multiple TF Card

5).
Mouse click the button to start the card's burning, burning process do not do other operations.（Please
backup the important data on the card before operation）

6）．
Mouse click the button to restore the card format for ordinary card。

7）．
The mouse click the button to remove the information from the list。
第 6 页 共 13 页

9）．
Click the mouse button to check if there is any card inserted into PC. If yes, the related information will
be updated in the ‘information’ list.

10）．Prompt information list

Tips information during the burn card。


第 7 页 共 13 页

3. Operation of burning card


Step 1 , Lunch The phoenixcard executable file.

Step2, Click button to select the image file.


Step3, Plug in the SD or TF Card with the Card adapter.
Step4, Select the drive you want to burn.

Step5, Select the work type

Step6. Click the button


Burning tips information will be displayed in the middle of the prompt message list

The result Screenshot as below


A．Interface in the process of burning
第 8 页 共 13 页

B． Burn successful interface


第 9 页 共 13 页

C． Burning failure interface


第 10 页 共 13 页

Failed to show a red prompt, as shown in figure M card tips。


第 11 页 共 13 页

4. Restore the card


Step 1 , Lunch The phoenixcard executable file.

Step2, Click button to select the image file.


Step3, Plug in the SD or TF Card with the Card adapter.
Step4, Select the drive you want to burn.

Step4, Click the button to restore the card

Step5, Plugin out the card

Note：
A．Before the operation of production card is completed, click on the closure will prompt

B． In the process of buring, the operation of the plug card will directly cause the failure of burning
第 12 页 共 13 页

5. Refresh Drive
If you want to check if there is any newly inserted card to the PC, you can click the ‘Refresh Drive’
button. And the related information will show as below if there is any, otherwise will show ‘No drive’ in the
information list:

You might also like