W005F....

W10F

1.5 Amp. Glass Passivated Bridge Rectifier

Voltage Current
50 V to 1000 V 1.5 A
ROUND
FEATURES
• High case dielectric strength
• High forward surge current capability
• Ideal for printed circuit boards
• Solder dip 260ºC, 40s
• Component in accordance to RoHS 2002/95/EC
and WEEE 2002/96/EC
• Typical IR less than 0.1µA

MECHANICAL DATA
• Case: ROUND
Epoxy meets UL 94V-0 flammability rating.
• Polarity: As marked on body.
• Terminals: Silver plated leads, solderable per J-STD-002
and JESD22-B102.
+ ~ Consumer grade.

TYPICAL APPLICATIONS
Used in ac-to-dc bridge full wave rectification for SMPS,
~ - lighting ballaster, adapter, battery charger, home appliances, office
equipment, and telecommunication applications..

Maximun Ratings and Electrical Characteristics at 25°C

W005F W01F W02F W04F W06F W08F W10F
Marking code W005F W01F W02F W04F W06F W08F W10F
VRRM Peak recurrent reverse voltage (V) 50 100 200 400 600 800 1000
VRMS Maximum RMS voltage (V) 35 70 140 280 420 560 700
VDC Maximum DC blocking voltage (V) 50 100 200 400 600 800 1000
R Load 1.5 A
IF (AV) Forward current at Tamb = 25°C
C Load 1.2 A
IFRM Recurrent peak forward current 15 A
10 ms. peak forward surge current
IFSM 50 A
(Jedec Method)

I2t I2t value for fusing (t = 10 ms) 12 A2sec

Tj Operating temperature range – 55 to + 125 °C
Tstg Storage temperature range – 55 to + 150 °C

Electrical Characteristics at Tamb = 25 °C

VF Max. forward voltage drop per 1.0 V
element at IF = 1.0 A

IR Max. reverse current per element at VRRM 10 µA

www.fagorelectronica.com Version: Mar-12

Document Name: wf Page Number: 1/4
 W005F....W10F

1.5 Amp. Glass Passivated Bridge Rectifier

Ordering information

PREFERRED P/N PACKAGE CODE DELIVERY MODE BASE QUANTITY UNIT WEIGHT (g)

W06F BU BULK 1,000 1.12

W06FA BU BULK 3,000 1.09

W06FB BU BULK 3,000 1.09

Package Outline Dimensions: (mm) ROUND

Long leads Short leads
±0.5
9.5
5±0.5

Suffix L±0.5
8.5±0.5

"A" 4
±0.5 "B" 3
5
L±0.5
4.1±0.5
4.1±0.5

ø0.8±0.05
30±1

C Serie W Serie

Marking code
ø0.8±0.05
Year code
Test sorting code Week code
Marking code
Year code
Week code

www.fagorelectronica.com Version: Mar-12

Document Name: wf Page Number: 2/4
 W005F....W10F

1.5 Amp. Glass Passivated Bridge Rectifier

Ratings and Characteristics (Ta 25 ºC unless otherwise noted)

1.6 1.6
50 to 60 Hz 50 to 60 Hz
Resistive or Resistive or
Bridge Output Full Wave Rectified

Bridge Output Full Wave Rectified

1.4 1.4
Inductive Load Inductive Load
1.2 Capacitive Load 1.2 0 - 10 µF
Capacitive
Current Average (A)

Current Average (A)

< 500 µF 10 - 100 µF
Load
1.0 500 - 5000 µF 1.0 > 100 µF

0.8 0.8

0.6 0.375" P.C.B. 0.6 P.C.B.

0.375"
(9.5 mm) (9.5 mm)
0.4 0.4

0.2 Copper Pads 0.2 Copper Pads

0.22 x 0.22" (5.5 x 5.5 mm) 0.22 x 0.22" (5.5 x 5.5 mm)
0 0
20 40 60 80 100 120 140 20 40 60 80 100 120 140
Ambient Temperature (°C) Ambient Temperature (°C)

Figure 1. Derating Curves Output Rectified Current for Figure 2. Derating Curves Output Rectified Current for
W005F...W04F W06F...W10F

75 10
TJ = 25 °C
Instantaneous Reverse Current (µA)

10 ms Single Sine-Wave
Peak Forward Surge Current (A)

60

1 TJ = 100 °C
45

30
0.1

15

1.0 Cycle TJ = 25 °C
0 0.01
1 10 100 0 20 40 60 80 100
Number of Cycles at 50 Hz Percent of Rated Peak Reverse Voltage (%)

Figure 3. Maximum Non-Repetitive Peak Forward Surge Figure 4. Typical Reverse Characteristics Per Diode
Current Per Diode

100 100
Instantaneous Forward Surge Current (A)

TJ = 25 °C TJ = 25 °C
Pulse Width = 300 µs f = 1.0 MHz
1 % Duty Cycle Vsig = 50 mVp-p
Junction Capacitance (pF)

10

1 10

0.1

0.01 1
0.4 0.6 0.8 1.0 1.2 1.4 0.1 1 10 100
Instantaneous Forward Voltage (V) Reverse Voltage (V)

Figure 5. Typical Forward Characteristics Per Diode Figure 6. Typical Junction Capacitance Per Diode

www.fagorelectronica.com Version: Mar-12

Document Name: wf Page Number: 3/4
 W005F....W10F

1.5 Amp. Glass Passivated Bridge Rectifier

Disclaimer
All product, product specifications and data are subject to change without notice to improve reliability,
function or design or otherwise.

Fagor Electrónica, S.Coop., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, "Fagor"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained
in any datasheet or in any other disclosure relating to any product.

Fagor makes no warranty, representation or guarantee regarding the suitability of the products for any particular
purpose or the continuing production of any product. To the maximum extent permitted by applicable law,
Fagor disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for particular purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Fagor's knowledge
of typical requirements that are often placed on Fagor products in generic applications. Such statements are not
binding statements about the suitability of products for a particular application. It is the customer's responsibility
to validate that a particular product with the properties described in the product specification is suitable for use in a
particular application. Parameters provided in datasheets and/or specifications may vary in different applications
and performance may vary over time. All operating parameters, including typical parameters, must be validated
for each customer application by the customer's technical experts. Product specifications do not expand or
otherwise modify Fagor's terms and conditions of purchase, including but nos limited to the warranty expressed
therein.

Except as expressly indicated in writing. Fagor products are not designed for use in medical, life-saving, or
life-sustaining applications or for any other application in which the failure of the Fagor product could result in
personal injury or death. Customers using or selling Fagor products not expressly indicated for use in such
applications do so at their own risk and agree to fully indemnify and hold Fagor and its distributors harmless from
and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use
or sale, including attomeys fees, even if such claim alleges that Fagor or its distributor was negligent regarding
the design or manufacture of the part. Please contact authorized Fagor personnel to obtain written terms and
conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Fagor, Product names and markings noted herein may be trademarks of their
respective owners.

www.fagorelectronica.com Version: Mar-12

Document Name: wf Page Number: 4/4