Scribd
Upload
100 views

Central Processing Unit

The CPU is the central processing unit that carries out instructions from computer programs. It relies on the system clock, memory, storage, and buses to function. The CPU contains a control unit that handles processor control signals and directs data flow. It also contains an arithmetic logic unit that performs arithmetic and logical operations on instruction words. Registers temporarily store data and instructions for processing. Buses carry data, addresses, and control signals between the CPU and other computer components. The data bus transfers data, the address bus specifies memory locations, and the control bus determines processing through signals.

Uploaded by

Avisek shrestha
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100 views

Central Processing Unit

The CPU is the central processing unit that carries out instructions from computer programs. It relies on the system clock, memory, storage, and buses to function. The CPU contains a control unit that handles processor control signals and directs data flow. It also contains an arithmetic logic unit that performs arithmetic and logical operations on instruction words. Registers temporarily store data and instructions for processing. Buses carry data, addresses, and control signals between the CPU and other computer components. The data bus transfers data, the address bus specifies memory locations, and the control bus determines processing through signals.

Uploaded by

Avisek shrestha
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Unit: V

Central Processing Unit


CPU or central processing unit in computer is an electronic circuitry that carries out the
instruction given by a computer program.

The central processing unit (CPU) is the unit which performs most of the processing inside a
computer. To control instructions and data flow to and from other parts of the computer, the
CPU relies heavily on a chipset, which is a group of microchips located on the motherboard.

To function properly, the CPU relies on the system clock, memory, secondary storage, and
data and address buses.

This term is also known as a central processor, microprocessor or chip.

Functions of CPU in computer: 

1. Controlling all other parts of the machine and sending timing signals.
2. Transferring data between memory and I/O devices
3. Fetching data and instructions from memory
4. Decoding instruction
5. Performing arithmetical and logical operations
6. Executing programs stored in memory
7. Performing communication among the I/O devices etc.

Control Unit (CU)


A control unit (CU) handles all processor control signals. It directs all input and output flow,
fetches code for instructions from micro programs and directs other units and models by
providing control and timing signals. A CU component is considered the processor brain
because it issues orders to just about everything and ensures correct instruction execution.

CU functions are as follows:

 Controls sequential instruction execution


 Interprets instructions
 Guides data flow through different computer areas
 Regulates and controls processor timing
 Sends and receives control signals from other computer devices
 Handles multiple tasks, such as fetching, decoding, execution handling and storing
results
CUs are designed in two ways:

 Hardwired control: Design is based on a fixed architecture. The CU is made up of


flip-flops, logic gates, digital circuits and encoder and decoder circuits that are wired
in a specific and fixed way. When instruction set changes are required, wiring and
circuit changes must be made. This is preferred in a reduced instruction set computing
(RISC) architecture, which only has a small number of instructions.
 Micro program control: Micro programs are stored in a special control memory and
are based on flowcharts. They are replaceable and ideal because of their simplicity.

Arithmetic and Logic Unit (ALU)


An arithmetic logic unit (ALU) is a major component of the central processing unit of
a computer system. It does all processes related to arithmetic and logic operations that
need to be done on instruction words.

In some microprocessor architectures, the ALU is divided into the arithmetic unit
(AU) and the logic unit (LU).

An arithmetic logic unit is also known as an integer unit (IU).

ALUs routinely perform the following operations:

 Logical Operations: These include AND, OR, NOT, XOR, NOR, NAND, etc.
 Bit-Shifting Operations: This pertains to shifting the positions of the bits by a certain
number of places to the right or left, which is considered a multiplication operation.
 Arithmetic Operations: This refers to bit addition and subtraction. Although
multiplication and division are sometimes used, these operations are more expensive
to make. Addition can be used to substitute for multiplication and subtraction for
division.

Register Set
A processor register (CPU register) is one of a small set of data holding places that are
part of the computer processor.

A register may hold an instruction, a storage address, or any kind of data (such as a bit
sequence or individual characters). Some instructions specify registers as part of the
instruction. For example, an instruction may specify that the contents of two defined
registers be added together and then placed in a specified register.

There are various types of computer registers… Such as,

 Data Register.
 Accumulator Register.
 Memory Address Register.
 Memory Buffer Register.
 Program Counter.
 Instruction Register.
 Stack Control Register.
 Flag Register.
 I/O Address Register.
 I/O Buffer Register.

Introduction to Bus

The system bus is a pathway composed of cables and connectors used to carry data
between a computer microprocessor and the main memory. The bus provides a
communication path for the data and control signals moving between the major
components of the computer system. 

In short:

 Data Bus: Carries the data that needs processing


 Address Bus: Determines where data should be sent
 Control Bus: Determines data processing
Data bus
-Bi-directional

- The data lines provide a path for moving data between system modules.

-The data bus may consist of from 32 to hundreds of separate lines, the number of lines
being referred to as the width of the data bus.

-The width determines the overall system performance.

- The bandwidth of a data bus is the number of bits it can transfer in a single operation,
called a bus cycle.

Address Bus
-unidirectional

The computer must be able to access every character of memory rapidly, so every
character has its own address number. The central processor specifies which addresses it
wants to read or write and the address bus carries this information to a memory controller
circuit, which locates and fetches the information.

Control bus
A control bus is a computer bus that is used by the CPU to communicate with devices that
are contained within the computer. This occurs through physical connections such as
cables or printed circuits. The CPU transmits a variety of control signals to components
and devices to transmit control signals to the CPU using the control bus. One of the main
objectives of a bus is to minimize the lines that are needed for communication. An
individual bus permits communication between devices using one data channel. The
control bus is bidirectional and assists the CPU in synchronizing control signals to
internal devices and external components. It is comprised of interrupt lines, byte enable
lines, read/write signals and status lines.

You might also like