Scribd
Upload
122 views

Dosing Signals

This document provides a wiring diagram and descriptions for connecting external devices to the signal inputs of a pump. It warns that electric circuits connected to the pump inputs must be separated from dangerous voltages through double or reinforced insulation. The diagram shows the pin assignments for various signal functions including analog input and output, external stop signals, pulse signals, low-level signals, empty signals, and connections for relays and GENIbus communication.

Uploaded by

Kundai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views

Dosing Signals

This document provides a wiring diagram and descriptions for connecting external devices to the signal inputs of a pump. It warns that electric circuits connected to the pump inputs must be separated from dangerous voltages through double or reinforced insulation. The diagram shows the pin assignments for various signal functions including analog input and output, external stop signals, pulse signals, low-level signals, empty signals, and connections for relays and GENIbus communication.

Uploaded by

Kundai
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Signal connections

English (GB)
WARNING
Electric shock
Death or serious personal injury
- Electric circuits of external devices
connected to the pump inputs must be
separated from dangerous voltage by
means of double or reinforced
insulation!

2 1 2 1

3 4 3 4

2 1 2 1
5 5
3 4 3 4

4 3

1 2

TM06 7054 3818


4 5 4 5 3
3 4 3 4 2
2 2 3 GND 2 2 3 GND 4
Ź GND 1
1 1 BUS BUS 1 1
GND
2
1

Fig. 12 Wiring diagram of the electrical connections

Symbol Function Pin assignment


1/brown 2/white 3/blue 4/black
Analog GND/(-) mA (+) mA
External stop GND X
Pulse GND X
1 2 3 4
Low-level signal X GND
Empty signal X GND
1/brown 2/white 3/blue 4/black 5/yellow/green
Analog output (+) mA GND/(-) mA
1 2/brown 3/blue 4 5/black
GENIbus RS-485 A RS-485 B GND

1/brown 2/white 3/blue 4/black


Relay 1 X X
Relay 2 X X

17

You might also like