Scribd
Upload
65 views12 pages

GR-1/GR-2/GR-3: Lab Scale Glass Reactors

The document summarizes lab scale glass reactors models GR-1, GR-2, and GR-3 with capacities of 1L, 2L, and 3L respectively. The reactors feature a borosilicate glass vessel, temperature range of -80 to 200°C, PTFE shaft stirrer, glass cover with 5 openings, and drain valve without dead volume. They are CE certified and produced according to ISO quality standards.

Uploaded by

Summer Q
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views12 pages

GR-1/GR-2/GR-3: Lab Scale Glass Reactors

The document summarizes lab scale glass reactors models GR-1, GR-2, and GR-3 with capacities of 1L, 2L, and 3L respectively. The reactors feature a borosilicate glass vessel, temperature range of -80 to 200°C, PTFE shaft stirrer, glass cover with 5 openings, and drain valve without dead volume. They are CE certified and produced according to ISO quality standards.

Uploaded by

Summer Q
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Lab scale Glass Reactors

GR-1/GR-2/GR-3 (1L/2L/3L)
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

GR-2 GR-2
Model GR-1/GR-2/GR-3
Electrical Requirements 1～，220V/50Hz
Glass Vessel Capacity 1L / 2L / 3L
Cooling/Heating Jacket Capacity 1.2L / 1.7L / 2L

Glass Type Food grade borosilicate 3.3


Temperature Range -80～200℃
Vessel endurable pressure -0.1～0.0 Mpa

Glass Parts Jacket endurable pressure ≤+0.03 Mpa

Cooling Surface of Condenser 250cm2

Capacity of Constant Pressure Funnel 200ml

Endurable Temperature Difference (∆T) ≤80℃


Bench-top
Vessel Cover Domed with 5 openings
Glass Reactor
GR-1 /GR-2/GR-3 Opening for Stirring Shaft 24# standard Ground Mouth

Opening for Temperature Sensor 24# standard Ground Mouth

5 Openings Opening to Connect Condenser 24# standard Ground Joint

Opening to Feed Liquid Material 19# standard Ground Mouth

Opening for Constant Pressure Funnel 24# standard Ground Joint


Model GR-1/GR-2/GR-3

1. No dead volume design


Drain Valve
2. 100mm Above Floor (adjustable)

Inlet/Outlet of Jacket Rc 1/2 and Rc 3/4

Vacuum Sealing PTFE

Pt100, stainless steel with PTFE sleeve,


Temperature Sensor
Chemical Resistant

Bench-top Display Accuracy ±0.1℃

Glass Reactor Supporting Frame Stainless Steel 304

GR-1
Safety Over-heat, Over-load protection

GR-1/GR-2: 480W×420D×1100H
Dimensions(mm)
GR-3: 480W×480D×1200H
Net Weight 50-55 KG
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

Certification
 CE certified by TUV (Germany).
 Production is strictly in accordance with ISO and 6S management.
 CE certificate, Test report, ISO certificates (ISO-9001, ISO-14001, ISO-45001) available.
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

Overhead Stirrer
 German brand overhead stirrer.
 Motor power: 70W.
 Turn and push to set rpm: 40~500rpm.
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

Vacuum Gauge/ Temp Display


 Vacuum Gauge: display the vacuum level in the reactor.
 Temperature display: ±0.1℃.
 Temperature range: -80~200 ℃.
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

Glass Cover (with 5 necks)

 Neck for reflux condenser.

 Neck for liquid feeding valve.

 Neck for temperature probe.

 Neck for shaft stirrer.

 Neck for pressure dropping funnel.


Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

PTFE shaft stirrer—— made in UK


 Stirring shaft : PTFE reinforced stainless steel.
 Stirring agitator: pure PTFE, smooth, no burrs.
 Chemically inert, unbreakable, non scratch, easy to
clean, no cross contamination.
 Use up to 280 ℃.
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

Shaft Stirrer Sealing Guide (PTFE) —— made in UK


 Exceptional chemical resistance.
 Anti-whip and reduced vibration.
 Vacuum (5mmHg) and pressure (3~5psi)
 No shedding. (Recommended speed: continuous 500rpm)
Lab scale Glass Reactors
GR-1/GR-2/GR-3 (1L/2L/3L)

Glass Drain Port with PTFE Valve


 No dead volume design.
 Open/Close valve to start/stop draining.
One-stop Solution
At GWSI, our relationship with
you does not end with delivery of
the products, it is just the
Temperature Distillation Vacuum
Control Reaction Pumps beginning of our service.

www.gwsi-online.com

[email protected]

+86-371-68000368

You might also like