Scribd
Upload
304 views2 pages

6.1.5.3 Packet Tracer - Control IoT Devices

The document provides instructions for configuring an IoT home security system using a home gateway, motion sensor, security camera, smart door, and smart lamp. The instructions include configuring the home gateway to trigger the security camera and lock the smart door when the motion sensor is activated. It also describes testing the system by activating the motion sensor and unlocking the smart door when it is deactivated. Finally, it discusses setting the air conditioning and examining the programming scripts that control the smart lamp and temperature control.

Uploaded by

Samuel Souza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
304 views2 pages

6.1.5.3 Packet Tracer - Control IoT Devices

The document provides instructions for configuring an IoT home security system using a home gateway, motion sensor, security camera, smart door, and smart lamp. The instructions include configuring the home gateway to trigger the security camera and lock the smart door when the motion sensor is activated. It also describes testing the system by activating the motion sensor and unlocking the smart door when it is deactivated. Finally, it discusses setting the air conditioning and examining the programming scripts that control the smart lamp and temperature control.

Uploaded by

Samuel Souza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Packet Tracer - Control IoT Devices

Introduction
In this activity, you have just installed various IoT devices around the house and wish to configure them as a
home security system.
 Configure the Home Gateway to use a Motion Sensor
 Test and reset security features
 Set the air conditioning

Instructions
Step 1: Configure Home Gateway to use a Motion Sensor.
a. From the Desktop tab on Tablet, click Web Browser.
b. Type in the IP address of the home gateway 192.168.25.1 and press Enter.
c. Login to Home Gateway. When asked for username and password, use admin for both. This is the
default.
d. Click Conditions after logging in. Add a new rule and name it MotionDetectorOn.
e. From the pull down menu under If: choose Motion Detector. To the right of that menu, select on and to
the right again, select true.
f. From the pull down menu under Then set: choose Security Camera. To the right of that menu, select on
and to the right again, select true.
g. Add another Action. From the second pull down menu under Then set: choose Smart Door. To the right
of that menu, select Lock and to the right again, select Lock.
h. Add another Action. From the third pull down menu under Then set: choose Smart Lamp. To the right of
that menu, select Status and to the right again, select Dim.
i. Click OK to save this Action and return to the Conditions page.
j. Add another rule named MotionDetectorOff.
k. From the pull down menu under If: choose Motion Detector. To the right of that menu, select on and to
the right again, select false.
l. From the pull down menu under Then set: choose Security Camera. To the right of that menu, select on
and to the right again, select false.
m. Click OK to save this Action and return to the Conditions page.

Step 2: Test and reset security features.


a. From the Browser on Tablet, return to the home page of the Home Gateway at
http://192.168.25.1/home.html.
b. Click the arrows to the left of the Smart Door, Smart Lamp, Motion Detector, and Security Camera to
open their interfaces.
c. With the website visible, hold down the Alt key and click the Motion Detector.

 2019 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 1 of 2 www.netacad.com
Packet Tracer - Control IoT Devices

Question:
What is happening on the website, and in the Logical Interface of Packet Tracer?
Type your answers here.
d. When the motion detector turns off, so does the security camera. Unfortunately, you have managed to
lock yourself out of the house.
Question:
How can you easily unlock the door?
Type your answers here.
e. Alt-click the unlocked Smart Door to open it.
f. Alt-click the Switch to turn the dim Smart Lamp fully on. Alt-click the Switch again to turn the Smart
Lamp off. The Smart Lamp can also be controlled remotely through the Home Gateway home page.
g. Examine the Python script which manages the Smart Lamp under the Programming tab of the MCU.

Step 3: Set the air conditioning.


a. While you were outside, a cold front moved in. Alt-click the Temperature Control to cool the house,
twice, to heat the house, and three times to automatically cool or heat to a comfortable temperature.
b. Open the Temperature Control Programming tab from the Advanced menu to examine the Java script
that controls the unit.
c. The Home Gateway home page, Temperature Control and Temperature Meter display different
numbers.
Question:
What line of code in the Temperature Meter could be responsible for this discrepancy?
Type your answers here.
End of Document

 2019 - 2019 Cisco and/or its affiliates. All rights reserved. Cisco Public Page 2 of 2 www.netacad.com

You might also like