Scribd
Upload
809 views3 pages

Activity 26: Bjective Aterial Equired

This activity aims to measure the shortest distance between two skew lines and verify it analytically. Students will construct two skew lines using wooden blocks placed at coordinates on a grid paper pasted on plywood. They will measure the actual shortest distance between the lines and calculate it analytically by finding the equations of the lines and using a formula. The results of the actual and analytical shortest distances will then be compared.

Uploaded by

AKM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
809 views3 pages

Activity 26: Bjective Aterial Equired

This activity aims to measure the shortest distance between two skew lines and verify it analytically. Students will construct two skew lines using wooden blocks placed at coordinates on a grid paper pasted on plywood. They will measure the actual shortest distance between the lines and calculate it analytically by finding the equations of the lines and using a formula. The results of the actual and analytical shortest distances will then be compared.

Uploaded by

AKM
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Activity 26

OBJECTIVE MATERIAL REQUIRED


To measure the shortest distance A piece of plywood of size
between two skew lines and verify it 30 cm × 20 cm, a squared paper,
analytically. three wooden blocks of size
2cm × 2 cm × 2 cm each and one
wooden block of size 2 cm × 2 cm
× 4 cm, wires of different lengths,
set squares, adhesive, pen/pencil,
etc.

METHOD OF CONSTRUCTION
1. Paste a squared paper on a piece of plywood.
2. On the squared paper, draw two lines OA and OB to represent x-axis,
and y-axis, respectively.
3. Name the three blocks of size 2 cm × 2 cm × 2 cm as I, II and III. Name the
other wooden block of size 2 cm × 2 cm × 4 cm as IV.
4. Place blocks I, II, III such that their base centres are at the points
(2, 2), (1, 6) and (7, 6), respectively, and block IV with its base centre at
(6, 2). Other wooden block of size 2 cm × 2 cm × 4 cm as IV.
5. Place a wire joining the points P and Q, the centres of the bases of the
blocks I and III and another wire joining the centres R and S of the tops of
blocks II and IV as shown in Fig. 26.
6. These two wires represent two skew lines.
7. Take a wire and join it perpendicularly with the skew lines and measure the
actual distance.

24/04/18
Fig. 26

DEMONSTRATION
1. A set-square is placed in such a way that its one perpendicular side is along
the wire PQ.
2. Move the set-square along PQ till its other perpendicular side touches the
other wire.
172 Laboratory Manual

24/04/18
3. Measure the distance between the two lines in this position using set-square.
This is the shortest distance between two skew lines.
4. Analytically, find the equation of line joining P (2, 2, 0) and Q (7, 6, 0) and
other line joining R (1, 6, 2) and S (6, 2, 4) and find S.D. using

( )( )
   
a2 – a1 ⋅ b1 × b2
 . The distance obtained in two cases will be the same.
b1 × b2
OBSERVATION
1. Coordinates of point P are ________.
2. Coordinates of point Q are ________.
3. Coordinates of point R are ________.
4. Coordinates of point S are ________.
5. Equation of line PQ is ________.
6. Equation of line RS is ________.

Shortest distance between PQ and RS analytically = ________.

Shortest distance by actual measurement = ________.

The results so obtained are ________.

APPLICATION
This activity can be used to explain the concept of skew lines and of shortest
distance between two lines in space.

Mathematics 173

24/04/18

You might also like