0% found this document useful (0 votes)
84 views1 page

Proposed: 1 STOREY Residential Building: Support Midspan Plan Plan Plan

The document shows engineering drawings of reinforced concrete beam designs. There are two designs labeled with different reinforcement configurations. The first design has 4 top and 2 bottom longitudinal reinforcing bars and deformed bars for stirrups spaced at varying intervals. The second design has 2 top and 4 bottom longitudinal bars along with vertical deformed bars tied with 10mm diameter bars spaced every 0.20m. Dimensioning and labeling is provided for both cross section views.

Uploaded by

Chy Gomez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
84 views1 page

Proposed: 1 STOREY Residential Building: Support Midspan Plan Plan Plan

The document shows engineering drawings of reinforced concrete beam designs. There are two designs labeled with different reinforcement configurations. The first design has 4 top and 2 bottom longitudinal reinforcing bars and deformed bars for stirrups spaced at varying intervals. The second design has 2 top and 4 bottom longitudinal bars along with vertical deformed bars tied with 10mm diameter bars spaced every 0.20m. Dimensioning and labeling is provided for both cross section views.

Uploaded by

Chy Gomez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

20
1.20

0.40 0.40 0.40 0.45 0.30 0.45


7 - 16mm DIA. DEF. BARS 7 - 16mm DIA. DEF. BARS
0.20 0.20 BOTHWAYS BOTHWAYS
4-16mm Ø REBARS (TOP BARS) 2-16mm∅ REBARS (TOP BARS)

0.45
0.50
0.40

0.40
2-16mm∅ REBARS (BOTTOM BARS) 4-16mm Ø REBARS (BOTTOM BARS) 4 - 16 mm DIA. VERTICAL
4 - 16 mm DIA. VERTICAL BARS W/ 10 mm DIA. FOR TIES

0.20

0.30
1.20

1.20
BARS W/ 10 mm DIA. FOR TIES

0.10 C1
SUPPORT MIDSPAN C1

0.50

0.45
0.20
F2 F2
USED:
LB-2
10mm Ø DEF. BARS STIRRUPS SPACED
AT 5 AT 0.05m, 5 AT 0.10m, REST AT .15m,
REST @ .20m O.C.
2-12MMØ DEFORMED BARS W/
10MMØ TIES SPACED @ 0.20M O.C.
PLAN PLAN
L 0.15

L/3 L/3
0.31 0.31

0.20
3-16mm Ø REBARS
(TOP BARS)
C1 C1
LB-1 4 - 16 mm DIA. VERTICAL BARS 4 - 16 mm DIA. VERTICAL BARS

0.30
0.40

2-12MMØ DEFORMED BARS W/ W/ 10mm DIA. FOR TIES W/ 10mm DIA. FOR TIES
10MMØ TIES SPACED @ 0.15M O.C. PROVIDE: PROVIDE:
LATERAL TIES 10mm DIA. DEF BARS LATERAL TIES 10mm DIA. DEF BARS
NOTE: SPACING @5-0.05, 5 - O.10, 5 - 0.15m, SPACING @5-0.05, 5 - O.10, 5 - 0.15m,
2-16mm∅ REBARS (BOTTOM BARS) -PROVIDE LB -2 ON TOP OF DOORS AND WINDOWS REST @ 0.20m O.C REST @ 0.20m O.C
L/4 L/4 AND AT WINDOW SILLS.
SECTION -PROVIDE LB -1 AT GROUND FLOOR SLAB LEVEL
ALONG EXTERIOR WALLS.
FIN. FLR. LINE FIN. FLR. LINE

VARIES

VARIES
0.60

0.60
23 TYPICAL ROOF BEAM DETAIL (RB-1) 26 TYPICAL LINTEL BEAM DETAIL (LB-1) N.G.L. N.G.L.
SCALE 1:25m SCALE 1:25m

7 - 16mm DIA. DEF. BARS 7 - 16mm DIA. DEF. BARS

0.70

0.70
BOTHWAYS BOTHWAYS

1.00

1.00
0.30 0.10 NOTE:

0.20

0.20
STIFFENERS SHALL BE INSTALLED ON TOP OF DOORS,
F2 F2

0.10

0.10
WINDOWS, & WALLS AS INDICATED IN THE PLAN
0.10m THK. REINFORCED
100mm THK. CHB WALL CONCRETE SLAB
FIN. FLR. LINE
7 - 16mm DIA. DEF. 7 - 16mm DIA. DEF.
0.30
0.30

0.10 m GRAVEL BED BARS BOTHWAYS 1.20 BARS BOTHWAYS 1.20


NAT. GR. LINE
PROVIDE EXTRA PROVIDE EXTRA
0.10 m GRAVEL BED 0.10 m GRAVEL BED

0.20
1-10mm TIE BAR 1-10mm TIE BAR
0.30

USE 10mm DIA. DEF. BARS


SECTION SECTION
0.60

SPACED @.60m O.C.(VERTICAL


0.80

3-12mm DIA. & HORIZONTAL BARS)


CONTINOUS USED 10mm Ø DEF. BARS
0.30

DEF. BARS USED 12mm Ø DEF. BARS STIRRUPS SPACED @ 0.20m 0.10
3 - 12mm DIA. CONTINOUS
0.20

10mm DIA. O.C.


DEF. BARS DEF. BARS 29 COLUMN AND FOOTING DETAIL (C1-F1) 30 COLUMN AND FOOTING DETAIL (C2-F1)
SPACE @ SCALE 1:25m SCALE 1:25m
0.30m O.C 0.10 m GRAVEL BED
0.30

PLAN SECTION 27 STIFFINER DETAIL


SCALE 1:15m

24 TYPICAL WALL FOOTING DETAIL (WF-1)


SCALE 1:25m

FASCIA FRAME SPECIFICATIONS:


0.10m THK. REINFORCED
CONCRETE SLAB 1
1. TOP CHORD L- 1''X 1''X
4'' (STD)
SCHEDULE OF ROOF BEAM
2. BOTTOM CHORD L - 1''X41''''X(STD)
1
3. VERTICAL, ALL L- 1''X1''X
4'' (STD) AT LEFT AT RIGHT
2-0.10m CHB WITH
10mm DEF. BARS 0.30
THREAD
2
LANDING
ELEV. ± 0.40 4. DERUSTED, PAINTED WITH PRIMER
EPOXY PAINT DETAIL SUPPORT MIDSPAN SUPPORT STIRRUPS
1 5. WELDING CONNECTION MUST BE AT
RISER
0.20

LEAST THREE PASSES.


STRP: 10mm

0.10

FIN. GRADE LN. 0.10 m GRAVEL BED 6. USE FUJI 6011 SERIES.
0.20 0.20 0.20
4 @ 0.05, 4 @ 0.075
0.30

RB-1 4-16mm
∅ 2-16mm
∅ ∅ 5 @ 0.10, 2 @ 0.15
4-16mm
(200 X 250)
0.60

2-10mm Ø
LONGITUDINAL BARS 0.34
2 @ 0.20
0.100.20

0.40

0.40

0.40
SPACE @ 0.30m O.C
0.10 m GRAVEL BED 2-16mm
∅ 4-16mm
∅ ∅ REST 0.25 @ M O.C
2-16mm
0.40
0.40

SECTION
25 ZOCCALO FOOTING DETAIL 28 FASCIA FRAME DETAIL
SCALE 1:25m SCALE 1:25m

ARCHITECT: SEAL HOW TO CONTACT: PROJECT TITLE: DRAFTED BY: SHEET NO.
SHEET CONTENTS:
CITY ENGINEER'S OFFICE - ARCHITECTURAL DIVISION
N.S. VALDEROSA ST. ZAMBOANGA CITY Proposed: 1 STOREY S-2

PRC NO. : 11375


AR. RODEL S. FALCASANTOS, MPA
TIN NO. : 945 263 616
992-1936, 991-6446. 0922 800 9462 / 0927 405 4327
EMAIL: [email protected]
RESIDENTIAL BUILDING MR.& MRS. FALCASANTOS 08
PTR NO. : 1849666 VLDT: 01/28/20 LOCATION: LICOMO, ZAMBOANGA CITY OWNER

You might also like