Scribd
Upload
38 views1 page

Relay C

The document shows the coordination curves for three overcurrent protection relays - Relay2, Relay3, and Relay21 - on Bus16, which has a nominal voltage of 34.5 kV. Relay2 is a phase overcurrent relay with a pickup setting of 0.79 and a time delay of 0.24 seconds. Relay3 is also a phase overcurrent relay with a pickup setting of 0.92, time dial of 3.5, and time delay of 0.59 seconds. Relay21 provides backup protection with a longer time delay.

Uploaded by

Institute For Engineering Training and Placement
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

Relay C

The document shows the coordination curves for three overcurrent protection relays - Relay2, Relay3, and Relay21 - on Bus16, which has a nominal voltage of 34.5 kV. Relay2 is a phase overcurrent relay with a pickup setting of 0.79 and a time delay of 0.24 seconds. Relay3 is also a phase overcurrent relay with a pickup setting of 0.92, time dial of 3.5, and time delay of 0.59 seconds. Relay21 provides backup protection with a longer time delay.

Uploaded by

Institute For Engineering Training and Placement
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Amps X 100 Bus16 (Nom. kV=34.5, Plot Ref. kV=34.

5)
.5 1 3 5 10 30 50 100 300 500 1K 3K 5K 10K
1K 1K

500 500

300 300

Relay2 - P
OC1
100
ABB 100
RET 615
CT Ratio 500:1
Group 1
50 50
ANSI Extremely Inverse
Pickup = 0.79 (0.05 - 5 xCT Sec)
30 Time Dial = 0.1 30
3x = 0.365 s, 5x = 0.13 s, 8x = 0.0569 s
Inst = 1.37 (1 - 40 xCT Sec)
Time Delay = 0.24 s

10 Relay3 - P 10
OC1
ABB
5 RET 615 5

Seconds
Seconds

CT Ratio 200:1
3 Group 1 3
IEC Extremely Inverse
Pickup = 0.92 (0.05 - 5 xCT Sec)
Time Dial = 3.5
3x = 35 s, 5x = 11.7 s, 8x = 4.44 s
1
Inst = 13.611 (1 - 40 xCT Sec) 1
Time Delay = 0.59 s

.5 .5

.3 .3

.1 R .1

Relay3
.05 .05

.03 .03
Relay2 - 3P

R
.01 .01

Relay21
.5 3 5 10 30 50 100 300 500 1K 3K 5K 10K

Amps X 100 Bus16 (Nom. kV=34.5, Plot Ref. kV=34.5) ETAP Star 19.0.1C

Project: Date: 10-03-2021


Location: SN:
Contract: Rev: Base
Engineer: Fault: Phase
Filename: C:\ETAP 1901\Raghav\Raghav.OTI

You might also like