Scribd
Upload
2K views

Test Questions: Part 1: Drafting Competencies

This document contains test questions to assess competency in SOLIDWORKS drafting and part modeling. The questions involve creating different views of a part drawing, building and modifying a tool block part model by changing dimensions and material removal, and calculating the mass of the modified parts. Dimensions and views provided must be used to answer multiple choice or short answer questions requiring part modification and mass property calculation in SOLIDWORKS. An answer key is provided.

Uploaded by

4112 - Subhash N
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Test Questions: Part 1: Drafting Competencies

This document contains test questions to assess competency in SOLIDWORKS drafting and part modeling. The questions involve creating different views of a part drawing, building and modifying a tool block part model by changing dimensions and material removal, and calculating the mass of the modified parts. Dimensions and views provided must be used to answer multiple choice or short answer questions requiring part modification and mass property calculation in SOLIDWORKS. An answer key is provided.

Uploaded by

4112 - Subhash N
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Test Questions

Part 1: Drafting Competencies

1. To create drawing view ‘B’ it is necessary to sketch a spline (as shown) on drawing
view ‘A’ and insert which SOLIDWORKS view type?

a) Section
b) Crop
c) Projected
d) Isometric

16
2. To create drawing view ‘B’ it is necessary to sketch a spline (as shown) on drawing
view ‘A’ and insert which SOLIDWORKS view type?

a) Aligned Section
b) Detail
c) Broken-out Section
d) Section

17
Part 2: Part Modeling
The following images are to be used to answer Questions #3 – 4.

18
3. Part (Tool Block) - Step 1
Build this part in SOLIDWORKS.

Unit system: MMGS (millimeter, gram, second)


Decimal places: 2
Part origin: Arbitrary
All holes through all unless shown otherwise.
Material: AISI 1020 Steel
Density = 0.0079 g/mm^3

A = 81.00
B = 57.00
C = 43.00

What is the overall mass of the part (grams)?

Hint: If you don't find an option within 1% of your answer please re-check your solid
model.

a) 1028.33
b) 118.93
c) 577.64
d) 939.54

REMINDER: Save your part in a different file after each question in case it must be
reviewed.

19
4. Part (Tool Block) - Step 2
Modify the part in SOLIDWORKS.

Unit system: MMGS (millimeter, gram, second)


Decimal places: 2
Part origin: Arbitrary
All holes through all unless shown otherwise.
Material: AISI 1020 Steel
Density = 0.0079 g/mm^3

Use the part created in the previous question and modify it by changing the following
parameters:

A = 84.00
B = 59.00
C = 45.00

Note: Assume all other dimensions are the same as in the previous question.

What is the overall mass of the part (grams)?

20
Part Modeling (continued)
These images are to be used to answer Question #5.

21
22
5. Part (Tool Block) - Step 3
Modify the part in SOLIDWORKS.

Unit system: MMGS (millimeter, gram, second)


Decimal places: 2
Part origin: Arbitrary
All holes through all unless shown otherwise.
Material: AISI 1020 Steel
Density = 0.0079 g/mm^3

Use the part created in the previous question and modify it by removing material and
also by changing the following parameters:

A = 86.00
B = 58.00
C = 44.00

What is the overall mass of the part (grams)?

23
Part Modeling (continued)
These images are to be used to answer Question #6.

24
6. Part (Tool Block) - Step 4
Modify this part in SOLIDWORKS.

Unit system: MMGS (millimeter, gram, second)


Decimal places: 2
Part origin: Arbitrary
All holes through all unless shown otherwise.
Material: AISI 1020 Steel
Density = 0.0079 g/mm^3

Use the part created in the previous question and modify it by adding a pocket.

Note 1: Only one pocket on one side is to be added. This modified part is not
symmetrical.

Note 2: Assume all unspecified dimensions are the same as in the previous question
#5.

What is the overall mass of the part (grams)?

25
Answer Key
Answers:
1. b) Crop
2. c) Broken-out Section
3. d) 939.54 g
4. 1032.32 g
5. 628.18 g
6. 432.58 g
7. a) X = 348.66, Y = -88.48, Z = -91.40
8. X = 327.67, Y = -98.39, Z = -102.91

29

You might also like