Scribd
Upload
189 views2 pages

IOT Based Automatic Vehicle Accident Detection and Rescue System

This document describes an automatic vehicle accident detection and rescue system. The system uses sensors in vehicles to detect accidents and send alerts to emergency services via SMS with the location. It then guides ambulances to the accident site while controlling traffic lights en route to allow faster access. This aims to reduce delays in emergency response times and increase chances of survival for accident victims.

Uploaded by

hamed raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
189 views2 pages

IOT Based Automatic Vehicle Accident Detection and Rescue System

This document describes an automatic vehicle accident detection and rescue system. The system uses sensors in vehicles to detect accidents and send alerts to emergency services via SMS with the location. It then guides ambulances to the accident site while controlling traffic lights en route to allow faster access. This aims to reduce delays in emergency response times and increase chances of survival for accident victims.

Uploaded by

hamed raza
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

IOT Based Automatic Vehicle Accident Detection and

Rescue System
The rapid rise of technology and infrastructure has made our lives easier. The high demand of
automobiles has also increased the traffic hazards and road accidents. Life of the people is under high
risk. The delay in reaching of the ambulance to the accident location and the traffic congestion in
between accident location and hospital increases the chances of death of the victim. To overcome this
problem our automatic ambulance rescue system comes to the rescue.
This system consists of traffic congestion that was recognized as major problems in modern urban areas,
which have caused much uncomfortable for the ambulance. Moreover, road accidents in the city have
been nonstop and to bar the loss of life due to accidents is even more crucial. We are implementing the
AARS system is called (Automatic ambulance rescue system). The main aim of this scheme is to
provide a smooth flow for the ambulance to reach the hospitals in time. The aim of implementing which
would control mechanically the traffic lights in the path of the ambulance. The ambulance is controlled
by the central unit which furnishes the scantest route to the ambulance and also controls the traffic light
according to the ambulance location and thus reaching the hospital safely. From SMS we are,
identifying the location of the accident spot through the sensor systems in the vehicle which encountered
the accident and thus the server walks through the ambulance to the spot. This system is fully
automated, to finds the accident spot, controls the traffic lights, helping to reach the hospital in time.

Block Diagram:

 Hardware Specifications

 
 Atmega 328 Microcontroller

 
 GSM Modem

 
 Accelerometer Sensor

 
 Wifi modem

 
 Crystal Oscillator

 
 Resistors

 
 Capacitors

 
 Transistors

 
 Cables and Connectors

 
 Diodes

 
 PCB and Breadboards

 
 LED

 
 Transformer/Adapter

 
 Push Buttons

 
 Switch

 
 IC

 
 IC Sockets

You might also like