ALUMINUM

FLAT ROLLED
Product

Aluminum Sheet and Plate

Aluminum Strip and Coil
Aluminum Foil
Aluminum Tread or Embossed Sheet
Aluminum Disc
Coated Aluminum Sheet and Coil
PROFESSIONAL
O N AL
RELIABLE
EFFICIENT
ww w. y i e h . c o m
ww w. a l u m i n u m.yi eh .co m
 MANUFACTURING
Yieh United
Yieh Phui

EDUCATION
I-Shou University
E-Da International
Elementary
I-Shou Kindergarten

Yieh Mau
Yieh Hsing

E UNITED
GROUP

HEALTH CARE ESTATE &

E-Da Hospital ENTERTAINMENT
BUSINESS
E-Da World
Eliter International
E-Da Development

ABOUT YIEH CORP.

Yieh Corp. belongs to E United Group, which is the largest private metal
making group in Taiwan, accumulated more than 35 years of experience in
metal industry.

As one of most important sales outlet of E United Group, Yieh Corp.

successfully integrates internal and external metal resource in Taiwan and
Chinese mainland to provide total solution for client’s various needs.

Hereby we recommend one of our most popular metal products, aluminum flat
rolled product. We not only provide sheet, plate, coil, strip, foil and disc with quality
assurance, but also optimize complete supply chain to facilitate customer time
saving and cost effectiveness.

01
 This valuable metal possesses the whiteness of silver, the
indestructibility of gold, the tenacity of iron, the fusibility of
copper, the lightness of glass. It is easily wrought, is
very widely distributed, forming the base of most rocks,
is three times lighter than iron, and seems to have been
created for express purpose of furnishing us with the
material for our projectile.”

- Jules Vernes, “From the Earth to the Moon”, 1865

ADVANTAGES
EASY FORMING
LONG-LASTING
VERY DUCTILE

STRONG COST SAVING

ODORLESS & HARMLESS

BEAUTIFUL

EXCELLENT HEAT CONDUCTOR

LIGHT
HIGHLY CORROSION RESISTANT

ABUNDANT EXCELLENT ELECTRICAL CONDUCTOR

GOOD REFLECTIVE PROPERTIES

INFINITELY RECYCLABLE

ENERGY CONSERVATION

02
 STANDARD SPECIFICATION
The products from Yieh Corp. will be strictly produced according to national
or international standard, or sometimes to mutually agreed standard.

CHINESE STANDARD
GB/T 3190 Wrought Aluminum and Aluminum Alloy Chemical Composition
GB/T 3880 Wrought Aluminum and Aluminum Alloy Plates, Sheets and
Strips for General Engineering
GB/T 3618 Wrought Aluminum and Aluminum Alloys Tread Sheets
GB/T 3198 Aluminum and Aluminum Alloy Foils
YS/T 431 Aluminum and Aluminum Alloys Coil Coated Sheet and Strip

EUROPEAN STANDARD
EN 573 Aluminum and Aluminum Alloys Chemical Composition and
Form of Wrought Products
EN 485 Aluminum and Aluminum Alloys Sheet, Strip and Plate
EN 546 Aluminum and Aluminum Alloys Foil

AMERICAN STANDARD
ASTM B209 Standard Specification for Aluminum and Aluminum-Alloy
Sheet and Plate

ANSI 35.1 Alloy and Temper Designation Systems for Aluminum

ANSI 35.2 Dimensional Tolerances for Aluminum Mill Products

NOTE /
Chinese Standard is able to cover both ASTM and EN standard,
unless otherwise specified, Chinese GB Standard will be applied

03
ALLOY DESIGNATIONS
Comparison of alloy designations for aluminum flat products

Alloy Series Chinese Standard American Standard European Standard

1050
1050A EN AW-1050A

1060 1060
1100 1100
1xxx Series
1200 EN AW-1200

1145 1145
1235 1235 EN AW-1235

2014 2014 EN AW-2014

2017
2xxx Series
EN AW-2017A
2024 2024 EN AW-2024

3003 3003 EN AW-3003

3004 3004 EN AW-3004

3xxx Series
3005 3005 EN AW-3005

3105 3105 EN AW-3105

5005 5005 EN AW-5005
5052 5052 EN AW-5052
5xxx Series
5754 EN AW-5754

5083 5083 EN AW-5083

6061 6061 EN AW-6061

6xxx Series
6082 EN AW-6082

7xxx Series 7075 7075 EN AW-7075

8011
8xxx Series 8011A EN AW-8011A

8079 EN AW-8079

04
 TEMPER DESIGNATIONS
Temper Definition
F As fabricated (no mechanical property limits specified)
O Annealed

H12 Stain Hardened, 1/4 Hard

H14 Stain Hardened, 1/2 Hard
H16 Stain Hardened, 3/4 Hard
H18 Stain Hardened, Full Hard
H19 Stain Hardened, Extra Hard

H111 Annealed and slightly strain hardened (less than H11)

H112 Slightly strain harden from working at an elevated temperature or from limited
amount of cold work

Applies to alloys in the 5xxx series with a magnesium content of 3% or more, slightly
H116 strain harden at last operation, exfoliation and intergranular corrosion resistance are
specified.

H22 Stain Hardened and Partially Annealed, 1/4 Hard

H24 Stain Hardened and Partially Annealed, 1/2 Hard
H26 Stain Hardened and Partially Annealed, 3/4 Hard
H28 Stain Hardened and Partially Annealed, Full Hard

H32 Stain Hardened and stabilized, 1/4 Hard

H34 Stain Hardened and stabilized, 1/2 Hard
H36 Stain Hardened and stabilized, 3/4 Hard
H38 Stain Hardened and stabilized, Full Hard

Applies to alloys in the 5xxx series with a magnesium content of 3% or more, strain
H321 hardened and stabilized at last operation, exfoliation and intergranular corrosion
resistance are specified.

H42 Stain Hardened and painted or lacquered, 1/4 Hard

H44 Stain Hardened and painted or lacquered, 1/2 Hard
H46 Stain Hardened and painted or lacquered, 3/4 Hard
H48 Stain Hardened and painted or lacquered, Full Hard

T351 Solution heat-treated, cold worked, stress relived by stretching, and naturally aged

T4 Solution heat-treated and naturally aged

T451 Solution heat-treated , stress relived by stretching, and naturally aged

T6 Solution heat-treated and then artificially aged

T651 Solution heat-treated, stress relived by stretching, and artificially aged

05
ALUMINUM AND ALUMINUM ALLOY
SHEET AND PLATE
Standard Specification/ GB/T 3880, ASTM B209, EN 485

Alloy and Temper :

Alloy Temper
1xxx: 1050, 1050A, 1060, 1100
O, H112, H12, H14, H16, H18, H22, H24, H26
3xxx: 3003, 3004, 3005, 3105
O, H111, H112, H22, H24, H26, H28, H32, H34,
5xxx: 5005, 5052, 5754, 5083
H36, H38
6xxx: 6061, 6082 T4, T451, T6, T651
2xxx: 2014, 2017, 2024 T351, T451
7xxx: 7075 T651
*H116 and H321 for alloy 5083 are provided as per Mill’s Standard or by agreement

AVAILABLE SIZE RANGE

Dimension Range
Thickness: 0.5 ~ 6.0mm for sheet,
6.0 ~ 120mm for plate
Width: 900 ~ 2,200mm
Length: 2,000 ~ 10,000mm

STANDARD WIDTH AND LENGTH

1000x2000mm, 1250x2500mm, 1500x3000mm,

SURFACE FINISH

SURFACE PROTECTION

06
 ALUMINUM AND ALUMINUM ALLOY
STRIP AND COIL
Standard Specification/ GB/T 3880, ASTM B209, EN 485

Alloy and Temper :

Alloy Temper
1xxx: 1050, 1050A, 1060, 1100 O, F, H12, H14, H16, H18, H22, H24,
3xxx: 3003, 3004, 3005, 3105 H26, H28

O, F, H22, H24, H26, H28, H32, H34,

5xxx: 5005, 5052, 5754, 5083
H36, H38

AVAILABLE SIZE RANGE

Dimension Range
Thickness: 0.2 ~ 4.0mm
Width: 200 ~ 2,200mm

STANDARD WIDTH
1000mm, 1250mm, 1500mm, 1219mm, 1524mm

SURFACE FINISH
Mill Finish, unless otherwise specified

SURFACE PROTECTION
Without paper interleaved for all aluminum coils
With PE/PVC filming on main side (if specified)

COIL ID
405mm, 505mm

07
ALUMINUM AND ALUMINUM ALLOY FOIL

Standard Specification/ GB/T 3198, EN 546

Alloy and Temper :

Alloy Temper

1xxx: 1050, 1050A, 1060, 1100

1145, 1235, 1200 O, H14, H16, H18, H19, H22, H24, H26
3xxx: 3003
8xxx: 8011, 8011A,8079 O, H18, H19, H22, H24, H26

AVAILABLE SIZE RANGE

Dimension Range
Thickness: 0.006 ~ 0.2mm
Width: 200 ~ 1,800mm

SURFACE CONDITION
One side bright, the other side matte (for double rolled)
Two sides bright (for single rolled)

SURFACE TREATMENT

Lubrication, Lamination, Coating

CORE TYPE AND SIZE

Type: Aluminum, Steel, Fiber
Core ID: 75mm, 76.2mm, 150mm, 152.4mm,
300mm, 400mm

08
 ALUMINUM AND ALUMINUM ALLOY
TREAD SHEET
Standard Specification/ GB/T 3618, Base material conforms to GB/T 3880

Alloy and Temper :

Alloy Temper Remarks

1xxx: 1050, 1060, 1100 H114 fabricated from Temper O

O, H114, H194 H194 fabricated from Temper H18
3xxx: 3003, 3105
Temper H12, H14, H22, H24, H32 and H34,
which are applied to base material, are
5xxx: 5052, 5754 O, H114 provided as per client’s request and mutually
agreed

AVAILABLE SIZE RANGE

Dimension: Thickness Width Length

Range 1.5~4.5mm 1,000~1,600mm 2,000~4,000mm

SURFACE FINISH PATTERN TYPE

Bright Finish, Mill Finish Small Five Bar, Big Five Bar, Diamond

RAISED PATTERN

Pattern Type: Small Five Bar Big Five Bar Diamond

Pattern Height 1.0mm, +/-0.4mm 1.0mm, +/-0.4mm 1.0mm, +/-0.4mm
Pattern Length 35mm, +/-3.0mm 45mm, +/-3.0mm 33mm, +/-2.0mm

SURFACE PROTECTION
With paper interleaved

Small Five Bar Big Five Bar Diamond

09
ALUMINUM AND ALUMINUM ALLOY
EMBOSSED SHEET
Standard Specification/ Base material conforms to GB/T 3880

Alloy and Temper :

Alloy Temper

1xxx: 1050, 1060, 1100

O, H12, H14, H22, H24
3xxx: 3003

AVAILABLE SIZE RANGE

Dimension Range
Thickness: 0.3~1.5mm for coil
0.5~1.5mm for sheet
Width: 1,000~1,500mm
Length: Coiled, or 2,000~4,000mm

THE EMBOSSED PATTERN SHALL BE USUALLY CONFIRMED

BY CUSTOMER WHEN PLACING ORDER

#1 Classical #2 Varied

#3 Varied #4 Varied

10
 ALUMINUM AND ALUMINUM ALLOY DISC

Standard Specification/ GB/T 3880

Alloy and Temper :

Alloy Temper

1xxx: 1050, 1060, 1070, 1100 O, H14, H24

3xxx: 3003 O, H12, H14, H22, H24

5xxx: 5052 O, H22, H24, H32, H34

6xxx: 6061 O, T4

AVAILABLE SIZE RANGE

Dimension Range
Thickness: 0.5 ~ 4.0mm
Diameter: 150 ~ 1,000mm

*Note / the diameter to be a multiple of 5mm due to the limit of die

DIAMETER TOLERANCE

Nominal Diameter Tolerance

Multiple of 5mm +/- 0.5mm
Non-multiple of 5mm +/- 3.0mm

SURFACE PROTECTION

With PE/PVC coating on main side (if specified)

11
COATED ALUMINUM AND ALUMINUM ALLOY
COIL AND SHEET
Standard Specification/
YS/T 431, GB/T17748, Mill’s Standard, Mutually Agreed Standard
Based material conforms to GB/T 3880

Alloy and Temper :

Alloy Temper Remarks

1xxx: 1050, 1100 Temper H12, H14, H16, H18,

H22, H24, H32 and H34, for
3xxx: 3003, 3105 H42, H44, H46, H48 base material, are provided
as per client’s request and
5xxx: 5005, 5052 mutually agreed

AVAILABLE SIZE RANGE

Dimension Range
Thickness: 0.25 ~ 1.8mm
Diameter: 500 ~ 1,550mm
Length: Coiled, or 2,000~4,000mm

COATING

Paint: PE (Polyester), PVDF

Thickness: Front > 18 microns (PE), >24 microns (PVDF)
Back > 8~10 microns (PE or EP)
Color: RAL colors or by confirmed sample

GLOSS

20% to 80%, depends on client’s requirement

SURFACE PROTECTION

With PE/PVC film on main side (if specified)

12
 TOLERANCE CONTROL
Thickness Tolerances for Cold Rolled Sheet, Coil, Strip and Disc

Specified Specified Width

Thickness =<1000mm >1000~1250mm >1250~1600mm >1600~2000mm

0.2~0.4mm +/- 0.02mm +/- 0.03mm +/- 0.03mm -

>0.4~0.6mm +/- 0.03mm +/- 0.04mm +/- 0.04mm +/- 0.04mm

>0.6~0.8mm +/- 0.03mm +/- 0.05mm +/- 0.05mm +/- 0.07mm

>0.8~1.0mm +/- 0.04mm +/- 0.06mm +/- 0.07mm +/- 0.08mm

>1.0~1.2mm +/- 0.04mm +/- 0.07mm +/- 0.07mm +/- 0.09mm

>1.2~1.5mm +/- 0.05mm +/- 0.08mm +/- 0.08mm +/- 0.11mm

>1.5~2.0mm +/- 0.06mm +/- 0.09mm +/- 0.09mm +/- 0.12mm

>2.0~3.0mm +/- 0.07mm +/- 0.09mm +/- 0.09mm +/- 0.15mm

>3.0~4.0mm +/- 0.10mm +/- 0.15mm +/- 0.16mm +/- 0.18mm

>4.0~6.0mm +/- 0.18mm +/- 0.22mm +/- 0.22mm +/- 0.25mm

>6.0~8.0mm +/- 0.24mm +/- 0.28mm +/- 0.28mm +/- 0.30mm

Thickness Tolerances for Hot Rolled Plate

Specified Specified Width
Thickness >1000~1250mm >1250~1600mm >1600~2000mm
6.0~8.0mm +/- 0.35mm +/- 0.40mm +/- 0.40mm
>8.0~10.0mm +/- 0.45mm +/- 0.50mm +/- 0.50mm
>10.0~15.0mm +/- 0.50mm +/- 0.60mm +/- 0.65mm
>15.0~20.0mm +/- 0.60mm +/- 0.70mm +/- 0.75mm
>20.0~30.0mm +/- 0.65mm +/- 0.75mm +/- 0.85mm
>30.0~40.0mm +/- 0.75mm +/- 0.85mm +/- 1.00mm
>40.0~50.0mm +/- 0.90mm +/- 1.00mm +/- 1.10mm
>50.0~60.0mm +/- 1.10mm +/- 1.20mm +/- 1.40mm
>60.0~80.0mm +/- 1.40mm +/- 1.50mm +/- 1.70mm
>80.0~100.0mm +/- 1.70mm +/- 1.80mm +/- 1.90mm
>100.0~150.0mm +/- 2.10mm +/- 2.20mm +/- 2.50mm

Thickness Tolerances for Foil

Specified Thickness (T) Tolerance (%)

0.006 ~ 0.009mm +/- 6% T

>0.009 ~ 0.200mm +/- 5% T

13
 Width Tolerances for Foil, Strip and Coil
Specified Specified Width
Thickness 300mm >300~500mm >500~1250mm >1250~1650mm >1650~2000mm

0.006~0.200mm +/- 1.0mm +/- 1.0mm +/- 1.0mm +/- 2.0mm +/- 2.0mm

>0.20~0.60mm + 0.4mm + 0.6mm + 1.5mm + 2.5mm + 3.0mm

>0.60~1.00mm + 0.5mm + 1.0mm + 1.5mm + 2.5mm + 3.0mm

>1.00~2.00mm + 0.7mm + 1.2mm + 2.0mm + 2.5mm + 3.0mm

>2.00~4.00mm + 1.0mm + 1.5mm + 2.0mm + 2.5mm + 4.0mm

Flatness Tolerances for Sheet and Plate

Total Deviation Partial Deviation
Specified %
Thickness %(for a chord of at least 300mm)
On Length On Width dmax/l
dmax/L dmax/W
>0.20~0.50mm By agreement By agreement By agreement

>0.50~3.0mm 0.4% 0.5% 0.5%

>3.0~6.0mm 0.3% 0.4% 0.4%

>6.0~50mm 0.2% 0.4% 0.3%

Note:
L=Length of the sheet or plate, W=width of the sheet or plate, d=deviation from flatness, l=length of chord

Squareness Tolerances for Sheet and Plate

Specified Specified Squareness tolerances for specified width
Length Thickness ”PP >1000~1500mm >1500~2000mm
”PP 4mm - -
”PP
>6.0mm 5mm - -
”PP 4mm 5mm 6mm
>1000~2000mm
>6.0mm 5mm 7mm 8mm
”PP 5mm 5mm 7mm
>2000~3000mm
>6.0mm 7mm 7mm 9mm
”PP 6mm 8mm 8mm
>3000~5000mm
>6.0mm 8mm 10mm 10mm
”PP 10mm 10mm 12mm
>5000mm
>6.0mm 12mm 12mm 15mm

14
 DENSITY & THEORETICAL WEIGHT
Density of Aluminum and Aluminum Alloy

Density Density Density Density

Alloy Alloy Alloy Alloy
( kg/m 3 ) ( kg/m 3 ) ( kg/m 3 ) ( kg/m 3 )
1050,
1050A 2,705 2014 2,800 3105 2,720 6082 2,700

1060 2,705 2017 2,790 5005 2,700 7075 2,810

1100 2,710 2024 2,780 5052 2,680 8011 2,710
1145 2,700 3003 2,730 5083 2,660 8011A 2,710
1200 2,700 3004 2,720 5754 2,670 8079 2,720
1235 2,705 3005 2,730 6061 2,700

THEORETICAL WEIGHT
Sheet and Plate (Plain)
Formula Theoretical Weight of Pcs = Thickness x Width x Length x Density = Kgs/pcs

For Example Theoretical Weight per pcs for standard size:

Standard Size Weight/pcs

1.0 x 1000 x 2000mm 5.400 kgs
1.0 x 1250 x 2500mm 8.438 kgs
1.0 x 1500 x 3000mm 12.150 kgs
1.0 X 1219 x 2438mm 8.024 kgs
1.0 x 1524 x 3048mm 12.542 kgs
3
*Note: Based on density of 2700 kg/m

Disc
Formula
Theoretical Weight of Pcs = Thickness x 3.14 x (Diameter/2) 2 x Density = Kgs/pcs

For Example
Alloy 1050, Thickness 3.0mm x Diameter 500mm
Weight/pcs = 3.0 x 10-3 x 3.14 x (0.5/2) 2 x 2705 = 1.593 kgs/pcs

15
PACKAGE DIMENSION
For Reference Only

Estimated height of pallet and outside diameter of coil

For Sheet & Plate(Plain) For Coil(Coil ID is 505mm)

Standard Pallet Estimated Estimated Standard Coil Estimated
Size Weight PCS Pallet Height Size Weight Coil OD
mm Kg for Thickness for any mm Kg for any
1.0mm only thickness thickness

1,000 185 pcs 335mm 2,500 1,240mm

1,500 278 pcs 428mm 3,000 1,340mm
1000 x 2000 1000 x C
2,000 370 pcs 520mm 4,000 1,520mm
2,500 463 pcs 613mm 5,000 1,680mm
1,000 119 pcs 269mm 2,500 1,135mm
1,500 178 pcs 328mm 3,000 1,220mm
1250 x 2500 1250 x C
2,000 237 pcs 387mm 4,000 1,375mm
2,500 296 pcs 446mm 5,000 1,520mm
1,000 82 pcs 232mm 2,500 1,055mm
1,500 123 pcs 273mm 3,000 1,135mm
1500 x 3000 1500 x C
2,000 165 pcs 315mm 4,000 1,275mm
2,500 206 pcs 356mm 5,000 1,400mm
1,000 125 pcs 275mm 2,500 1,145mm
1,500 187 pcs 337mm 3,000 1,230mm
1219 x 2438 1219 x C
2,000 249 pcs 399mm 4,000 1,390mm
2,500 312 pcs 462mm 5,000 1,535mm
1,000 80 pcs 230mm 2,500 1,050mm
1,500 120 pcs 270mm 3,000 1,125mm
1524 x 3048 1524 x C
2,000 159 pcs 309mm 4,000 1,265mm
2,500 199 pcs 349mm 5,000 1,390mm

*NOTE / Based on density of 2,700 kg/m 3

16
 STANDARD EXPORT PACKAGING

EYE TO SIDE
Coil Weight / 2.0~6.0MT

To be recommended when the coil width is

less than 1200mm to maximize container loading

EYE TO SKY
Coil Weight / 2.0~3.0MT

To be recommended when the coil width is

over 1200mm to maximize container loading and
coil weight to be about 2.5MT

17
WOODEN PALLET
Pallet Weight/ 1.0~3.0MT

Pallet weight of 2.0 to 2.5MT is recommended

to maximize container loading

LABEL AND SHIPPING MARK

18
 APPLICATION
Aluminum & its alloy are widely used in more than 90% of the industries in the world,
especially in transportation, construction, packaging, appliances and equipment.

ALUMINUM APPLICATION
Transportation
Packaging & Vessel
Others
Machine & Equipment
Electronics & Appliances

Durable Goods
Building & Construction

TRANSPORTATION

Aircraft & Aerospace

Automobile, Bus, Truck, Tank
Train, Metro Line
Ship, Boat, Yacht

BUILDING & CONSTRUCTION

Curtain Wall, Roofing

Decoration, Celling
Door, Window, Floor
Framework, Structure

19
PACKAGING & VESSEL

Can, Box, Case, Container

Seal, Lid, Cover
Flexible Package, Tube
Household Foil

ELECTRONICS & APPLIANCES

Computer, Laptop
Communication Tools
Consumer Electric
Heat Exchanger

MACHINE & EQUIPMENT

Catering Equipment
Textile Machinery
Precision Instrument
Medical Equipment

DURABLE GOODS

Cookware, Kitchen Utensils

Lamp Cover, Air Outlet
Light Reflecting Plate
Traffic Sign, Nameplate

OTHERS

Furniture, Partition
Hardware, Accessories
Sport Goods
PS plate

20
 ISO CERTIFICATION
Reliable Quality Control

Professional Services
Efficient Order Management

CE CERTIFICATION
An Important Passport
to European Market

Environmental Material
Assurance

21
ORDERING INFORMATION
Required Information in firm enquiry

Item Information Example

1.Product Name* Aluminum Sheet, Aluminum Foil Aluminum Sheet

2.Standard Specification* GB/T3880, ASTM B209, EN 485 GB/T 3880

3.Alloy* 1050, 1050A,3003,5052, 6061 1050

4.Temper* H14, H24, H32, T6, T651 H14

5.Dimension* Thickness x Width x Length 0.5 x 1219 x 2438mm

6.Order Quantity* Specific Quantity per each size 20MT

7.Surface Finish Bright Finish, Mill Finish

Mill Finish
(if any) Coating (paint, color, thickness)

8.Surface Protection Paper interleaved, PE coating

With Paper Interleaved
(if any) on main side

9.Coil ID (if specified) 405mm, 505mm N/A

10.Coil / Pallet Weight

3.0~5.0MT/coil, 1.5~2.5MT/pallet 2.0MT/pallet Max.
(if specified)

11.Application Catering Equipment, Curtain Wall Catering Equipment

12.Other Requirements Chemical Composition, Mechanical Thickness tolerance

(if any) Properties, Dimensional Tolerance on light side

The items with red star are required to be clarified for any enquiry.
Other specifications unlisted in our catalogue are available up to request, or will be
provided by agreement.

Minimum Order Quantity (MOQ)

5MT per size for popular items
7MT to 10MT per size for special dimensions
2MT per size for disc

NOTE /
The order with quantity less than MOQ may be acceptable on condition of that other
clients order same specifications at the time of ordering

22
ANNEX
Chemical Composition
Chemical Composition conforms to the standard specification of GB/T 3190,
EN 573 and ASTM B209

Others Al
Alloy Si Fe Cu Mn Mg Cr Zn Ti
Each Total Min.

1050 0.25 0.40 0.05 0.05 0.05 - 0.05 0.03 0.03 - 99.50

1050A 0.25 0.40 0.05 0.05 0.05 - 0.07 0.05 0.03 - 99.50

1060 0.25 0.35 0.05 0.03 0.03 - 0.05 0.03 0.03 - 99.60

1100 0.95 Si + Fe 0.05~0.20 0.05 - - 0.10 - 0.05 0.15 99.00

1200 1.00 Si + Fe 0.05 0.05 - - 0.10 0.05 0.05 0.15 99.00

1145 0.55 Si + Fe 0.05 0.05 0.05 - 0.05 0.03 0.03 - 99.45

1235 0.65 Si + Fe 0.05 0.05 0.05 - 0.10 0.06 0.03 - 99.35

2014 0.5~1.2 0.7 3.9~5.0 0.4~1.2 0.2~0.8 0.10 0.25 0.15 0.05 0.15 remainder

2017 0.2~0.8 0.7 3.5~4.5 0.4~1.0 0.4~0.8 0.10 0.25 0.15 0.05 0.15 remainder

2024 0.50 0.50 3.8~4.9 0.3~0.9 1.2~1.8 0.10 0.25 0.15 0.05 0.15 remainder

3003 0.60 0.70 0.05~0.20 1.0~1.5 - - 0.10 - 0.05 0.15 remainder

3004 0.30 0.70 0.25 1.0~1.5 0.8~1.3 - 0.25 - 0.05 0.15 remainder

3005 0.60 0.70 0.30 1.0~1.5 0.2~0.6 0.10 0.25 0.10 0.05 0.15 remainder

3105 0.60 0.70 0.30 0.3~0.8 0.2~0.8 0.20 0.40 0.10 0.05 0.15 remainder

5005 0.30 0.70 0.20 0.20 0.5~1.1 0.1 0.25 - 0.05 0.15 remainder

5052 0.25 0.40 0.10 0.10 2.2~2.8 0.15~0.35 0.10 - 0.05 0.15 remainder

5754 0.40 0.40 0.10 0.50 2.6~3.6 0.30 0.15 0.05 remainder
0.20 0.15

5083 0.40 0.40 0.10 0.4~1.0 4.0~4.9 0.05~0.25 0.25 0.15 0.05 0.15 remainder

6061 0.4~0.8 0.70 0.15~0.4 0.15 0.8~1.2 0.04~0.35 0.25 0.15 0.05 0.15 remainder

6082 0.7~1.3 0.50 0.10 0.4~1.0 0.6~1.2 0.25 0.20 0.10 0.05 0.15 remainder

7075 0.40 0.50 1.2~2.0 0.30 2.1~2.9 0.18~0.28 5.1~6.1 0.20 0.05 0.15 remainder

8011 0.5~0.9 0.6~1.0 0.10 0.20 0.05 0.05 0.10 0.08 0.05 0.15 remainder

8011A 0.4~0.8 0.5~1.0 0.10 0.10 0.10 0.10 0.10 0.05 0.05 0.15 remainder

8079 0.05~0.3 0.7~1.3 0.05 - - - 0.10 - 0.05 0.15 remainder

NOTE /
Limits are in mass percent maximum unless shown as a range or sated otherwise

23
MECHANICAL For Foil
PROPERTIES General Use
Elongation, %
Specified Tensile Strength
Alloy Temper Thickness MPa A50mm A100mm
-
-
-
O

-
-
1050
- - -
1060
H22 -
1100
1145 -
1200 - - -
1235 H14, H24
-
- - -
H16, H26 -
-
H18 - -
H19 - -
- -
O
- -
-
H22

H14 140~170 - -
3003
H24 140~170 -
H16 - -
H26 -
H18 -
H19 - -
-
-
-
O -
-
8011 -
8011A -
8079 H22

H24

H26
H18 - -
H19 - -

NOTE / Based on GB/T 3198

24
MECHANICAL For Sheet and Plate
PROPERTIES General Use
Tensile Strength (MPa) Yield Strength (MPa) Elongation % (A50mm / A)
Specified
Alloy Temper Thickness GB/T 3880 ASTM B209 EN 485 GB/T ASTM EN GB/T ASTM EN
(mm)
3880 B209 485 3880 B209 485
Min Max Min Max Min Max

1050
H14, H24

H18
O
H14
1050A H24

H18

O
1060 H14, H24
H18
O
1100 H14, H24
H18
O
H12
3003 H22
H14
H24
O, H111
3004 H22, H32
H24, H34
O, H111
3005 H14
H24
O, H111
3105 H14
H24
O, H111
5005 H22, H32
H24, H34

H112

O, H111
H22, H32
5052
H24, H34

H112

25
 Tensile Strength (MPa) Yield Strength (MPa) Elongation % (A50mm / A)
Specified
Alloy Temper Thickness
(mm) GB/T 3880 ASTM B209 EN 485 GB/T ASTM EN GB/T ASTM EN
3880 B209 485 3880 B209 485
Min Max Min Max Min Max
O
O, H111
H22, H32
5754 H24, H34

H112

O, H111

5083 H22, H32

H24, H34

H112

2014 T451

2017 T451

2024 T351

T4, T451
6061
T6, T651

T4, T451

6082 T6

T651

7075 T651

NOTE / 7KH$YDOXHIRUHORQJDWLRQLVWKHHORQJDWLRQPHDVXUHGRYHUDJDXJHOHQJWKRI¥6ZKHUH60

is the initial cross-sectional area of the test piece), and expressed in percent

26