Scribd
Upload
68 views3 pages

Bursting Check Rectangular Pile v1.2

This document provides details of a calculation for bursting check of a rectangular pile for a DE6 panel in the KPEd project. It includes input parameters such as number of studs, embedment length, shear forces, tension forces on shear links, properties of the shear links, and check of link capacity against required tension. The calculation template version is v1.1 dated 1/5/2021 which divides the shear links direction into length and width.

Uploaded by

Yanfei Jin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
68 views3 pages

Bursting Check Rectangular Pile v1.2

This document provides details of a calculation for bursting check of a rectangular pile for a DE6 panel in the KPEd project. It includes input parameters such as number of studs, embedment length, shear forces, tension forces on shear links, properties of the shear links, and check of link capacity against required tension. The calculation template version is v1.1 dated 1/5/2021 which divides the shear links direction into length and width.

Uploaded by

Yanfei Jin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Version Date Comment

v1.1 1/5/2021 Divide shear links direction length and width


Contract: N103 - NSC
Design Engineer: SKA
SURBANA JURONG INFRASTRUCTURE PTE. LTD
Approving Engineer:
Date: 12/23/2021
Calculation Template: Bursting check rectangular pile v1.1
Calculation For: DE6 panel, KPEd
Utilization ratio 0.743 OK

Reacton taken by stud N = 4329 kN

No of studs in length n legth = 6


No of studs in width n width = 4
Embedment length l embed = 2000 m

Longitudinal shear force per unit length (in length) Ved,l = 649.35 kN/m/side
Longitudinal shear force per unit length (in width) Ved,w = 432.90 kN/m/side

Angle θ = 45

Tension force, horizontal force (length) Hed,l = 649.35 kN/m/side


Tension force, horizontal force (width) Hed,w = 432.90 kN/m/side

Assumption, tension force (horizontal) on links will be spread by all of links uniformly in each respective direction

No of links legs in length direction n links,l = 1


No of links legs in width direction n links,w = 1

Tension in 1 link leg (length) T,l = 1298.70 kN


Tension in 1 link leg (width) T,w = 865.80 kN

Used links VARIES


Links leg area (length) Asw,l = 804.25 mm2
Links spacing (length) s,l = 200
Links leg area (width) Asw,w = 549.78 mm2
Links spacing (width) s,w = 200
Steel yield stress, fyk fyk = 500 N/mm2
Links capacity (length) = 1748.36 N/mm
= 1748.36 kN/m
Links capacity (width) = 1195.17 N/mm
= 1195.17 kN/m
10 Beam
13 Slab
16
20
25
32
40

You might also like