Scribd
Upload
72 views1 page

Chose The Correct Answer Only: Subject: Basic Electrical Engineering Code: EE 101

1. The document is a 20 question multiple choice quiz for a Basic Electrical Engineering course. It covers topics like parallel connections of cells, efficiency of power transfer, AC waveform parameters, phasor diagrams, linearity of circuit elements, and maximum power transfer. 2. The questions test understanding of key electrical engineering concepts such as equivalent circuits, superposition theorem, impedance of series-parallel RLC circuits, power in AC circuits, and resonance in parallel RLC circuits. 3. Maximum power transfer is assessed through questions about optimal load resistance in a voltage source-resistor circuit and applications of the maximum power transfer theorem.

Uploaded by

Bhumika Kedia XI C 9799
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
72 views1 page

Chose The Correct Answer Only: Subject: Basic Electrical Engineering Code: EE 101

1. The document is a 20 question multiple choice quiz for a Basic Electrical Engineering course. It covers topics like parallel connections of cells, efficiency of power transfer, AC waveform parameters, phasor diagrams, linearity of circuit elements, and maximum power transfer. 2. The questions test understanding of key electrical engineering concepts such as equivalent circuits, superposition theorem, impedance of series-parallel RLC circuits, power in AC circuits, and resonance in parallel RLC circuits. 3. Maximum power transfer is assessed through questions about optimal load resistance in a voltage source-resistor circuit and applications of the maximum power transfer theorem.

Uploaded by

Bhumika Kedia XI C 9799
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

NATIONAL INSTITUTE OF TECHNOLOGY SILCHAR

Electrical Engineering Department


First Semester, BTech
Minor Test 1, 28th May 2021
Subject: Basic Electrical Engineering Code: EE 101
Time: 30 Minutes Max. marks: 20
Chose the correct answer only
1. The condition for connecting two cells in parallel that they have (a) identical internal resistances (b) same make
(c) same ampere-hour capacity (d) equal emfs
2. The efficiency of power transfer in a circuit when maximum power transfer takes place is
(a) 100% (b) 25% (c) 50% (d) 75%
3. The rating of an electric iron is 230V, 500W, AC. The value of 230V refers to
(a) average value (b) r.m.s value (c) peak-value (d) peak to peak value
4. An alternating current is given as i=62.35 sin 333t A; the maximum value and frequency are-
(a) 62.35A, 53 Hz (b) 62.35A, 52.43 Hz (c) 44.088A, 9539.74 Hz (d) none
5. Thevenin's equivalent resistance is ------Norton's equivalent resistance (a) same as (b) not same as (c)
reciprocal of (d) different from
6. While drawing a phasor diagram for a parallel circuit ------ is taken as reference phasor.
(a) current (b) voltage (c) power (d) none
7. The symbol j represents rotation of a phasor ------ degrees
(a) clockwise, 90 (b) counter-clockwise, 45 (c) counter-clockwise, 90 (d) clockwise, 180
8. Which of the following is a non-linear circuit parameter
(a) inductor (b) capacitor (c) wire wound resistor (d) transistor
9. A circuit having a voltage source in the input is termed as (a) Linear circuit (b) Unilateral circuit (c) Bilateral
circuit (d) Active circuit
10. Superposition theorem can be applied only to circuits having (a) Resistive element (b) Passive element (c)
Linear and bilateral (d) Nonlinear elements
11. A series RLC circuit is operating above the resonant frequency. The current in the circuit (a) Leads the applied
voltage (b) Lags the applied voltage (c) Is in phase with the applied voltage (d) Is zero
12. All the rules and laws of D.C. circuit also apply to A.C. circuit containing
(a) Resistance only (b) Inductance only (c) Capacitance only (d) All the above
13. 200 V is the r.m.s. value of a half wave rectified sine wave. The r.m.s. value of full wave rectified AC. will be (a)
141.4 V (b) 282.8 V (c) 111 V (d) 100 V
14. When the phase difference between the current and voltage is -------the power consumed in a circuit element will
be least (a) 180° (b) 90° (c) 60° (d) 0°
15. A parallel circuit at resonance magnifies the (a) Current (b) Power (c) Voltage (d) Frequency
16. The circuit element that opposes the change in circuit current is---(a) Capacitance (b) Conductance (c)
Resistance (d) Inductance
17. The impedances of two parallel branches of a circuit are (10 + j10) and (10 -j10) respectively. The impedance
of the parallel combination is (a) 20 + j0 (b) 0 -j20 (c) 5 -j5 (d) 10 + j0
18. In an a.c. circuit----(a) real power is more than reactive power (b) Reactive power is more than apparent power
(c) Apparent power is more than real power (d) Reactive power is more than reactive power.
19. For the circuit shown in Fig. below, the power transferred will be maximum when RL is equal to

(a) 4.5 Ω (b) 6 Ω (c) 3 Ω (d) 7.4 Ω


20. The maximum power transfer theorem is useful in (a) electronic circuit (b) power system (c) lighting system
(d) network connecting motor.

You might also like