Scribd
Upload
222 views2 pages

Euromold Elastimold PITO E Plug in Termination Up To 24kV 250A

The document discusses various types of cable joints, terminations, and bushings for medium voltage power cables up to 24kV. It provides specifications for plug-in cable terminations and equipment bushings including applicable standards, voltage and current ratings, dimensions, and ordering information. Images and tables of technical data are included.

Uploaded by

Mosa Elnaid Elnaid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
222 views2 pages

Euromold Elastimold PITO E Plug in Termination Up To 24kV 250A

The document discusses various types of cable joints, terminations, and bushings for medium voltage power cables up to 24kV. It provides specifications for plug-in cable terminations and equipment bushings including applicable standards, voltage and current ratings, dimensions, and ordering information. Images and tables of technical data are included.

Uploaded by

Mosa Elnaid Elnaid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

CABLE JOINTS, CABLE TERMINATIONS, CABLE GLANDS, CABLE CLEATS

FEEDER PILLARS, FUSE LINKS, ARC FLASH, CABLE ROLLERS, CUT-OUTS

11KV 33KV CABLE JOINTS & CABLE TERMINATIONS


FURSE EARTHING
www.cablejoints.co.uk
Thorne and Derrick UK
Tel 0044 191 490 1547 Fax 0044 191 477 5371
Tel 0044 117 977 4647 Fax 0044 117 9775582

PITO-E
PLUG-IN
TERMINATION

Application Technical characteristics Up to 24 kV - 250 A


• Separable termination Each plug-in termination is tested
designed to connect overhead for AC withstand prior to leaving
lines or bus bars to equipment. the factory.
• Is suitable for indoor and
outdoor use for medium
polluted atmosphere. 6/10 (12) kV
6.35/11 (12) kV
8.7/15 (17.5) kV
12/20 (24) kV
12.7/22 (24) kV

Design Dia. 80

The plug-in termination is a Dia. 20 A


moulded epoxy insulated part. M12
It meets the type A - 250 A
interface as described in 30
CENELEC EN 50180 and
50181.

Specifications and
standards
The separable termination
267
PITO-E meets the requirements
of IEC 137. 235

Dia. 8.2

Ordering instructions
To order the plug-in termination
10
for 12 or 24 kV, specify PITO-E.
The kit includes the bail 35
restraint and 2 brass nuts.

Dia. 70
90 B
Dia. 110

In mm.

Plug-in Voltage Current Creepage distance


termination Ur Ir A-B
type (kV) (A) (mm)
PITO-E 12 250 510
PITO-E 24 250 510

13
180AR-1 /-2 /-3
INTERFACE A
EQUIPMENT BUSHING

Application Specifications and Up to 24 kV - 250 A


For use in equipment insulated standards
with oil fluid, typically for The plug-in type equipment
transformers, switch gear, bushings 180AR-X meet the
capacitors... requirements of CENELEC EN
50180 and IEC 137.

Technical characteristics 6/10 (12) kV


Each bushing is tested for
6.35/11 (12) kV
AC withstand and partial
8.7/15 (17.5) kV
discharge prior to leaving the
12/20 (24) kV
factory.
12.7/22 (24) kV

Design
• The equipment bushing is a
moulded epoxy insulated part
in accordance with CENELEC
EN 50180.
The 180AR-2 bushing has a
length B outside this standard.
• The standard bushings,
28
(K)180AR-1 /-2 /-3, are
equipped with 6 tabs for the
8
bail restraint.
• The (K)180AR-1-G and A
(K)180AR-3-G are equipped
with 4 tabs and 2 threaded
inserts M6x1 (-G version).
B

Minimum oil level:


Ordering instructions - 12 kV: 40 mm
- 24 kV: 50 mm
To order the equipment
bushing, specify the type.
The bushings are supplied
19
with an earth lead (/J) or an
earth plate (/GS). This earth
M10
connection must be specified
Dia. 75
when ordering.
Dia. 80
In mm.

Equipment Voltage Current Dimensions (mm)


bushing Ur Ir
type (kV) (A) A B
180AR-1 12 250 222 106
K180AR-1 24 250 222 106
180AR-2 12 250 284 168
K180AR-2 24 250 284 168
180AR-3 12 250 171 55
K180AR-3 24 250 171 55

14

You might also like