Scribd
Upload
225 views1 page

Hyposeal: Made With LIQUILON

Uploaded by

Tiffany Dacino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
225 views1 page

Hyposeal: Made With LIQUILON

Uploaded by

Tiffany Dacino
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

528

HYPOSEAL
Made with LIQUILON ®
PRODUCT DESCRIPTION TYPICAL OBSERVATIONS
528 Hyposeal effectively reduces or completely Appearance Gel Form
seals leaks in tubing, casing, surface units, wellhead Color Pale Green
flanges, production lines, and pressure control Odor Mild
equipment used in the oilfield, petrochemical, and Active Component LIQUILON
general industries. A seal can be affected even in Manufacturing Process Fluoromation
instances where the exact location of the leak can Density, lb/gal @ 77°F (25°C) 9.8
not be determined. The ID of the line is not reduced Specific Gravity @ 77°F (25°C) 1.17
by the use of this product. Flash Point, ASTM D-92 245°F (118°C)
Freezing Point -40°F (-40°C)
528 Hyposeal is made with LIQUILON, which Shelf Life (unopened container) One year
produces a seal that controls leakage in operating
systems. LIQUILON is inert and unaffected by
RELATED PRODUCTS
acids, oils, caustics, alkalies, common solvents,
or extreme well conditions. 527 Hyposeal

528 Hyposeal seals by differential pressure, never Ask about our GX® Safety Seal, a safety valve
becoming brittle but providing a flexible, permanent sealant for hydraulically controlled surface and
seal, which does not restrict the production flow. subsurface safety control systems.
In addition, it seals under high or low pressure
Also available is GX 818 Safety Valve Gel Sealant
and remains effective at high well temperatures.
for Umbilical Line.
Because of its effective sealing capabilities,
Hyposeal 528 eliminates downtime and shutdown
of equipment.

BENEFITS
▪▪ Excellent sealing of leaks in piping systems
▪▪ Controls leakage in operating systems
▪▪ Eliminates downtime and shutdown of
equipment
▪▪ Easily mixes with fresh or salt water

APPLICATION
528 Hyposeal is recommended for openings up to
.20 inches (0.5 cm) (large leaks), and one kit is
recommended for every 2,500 feet (762 m) of 2⅜
inches (6.04 cm) tubing. The one step time-saving
application eliminates the need for rigging up for
a workover job, pulling tubing, or disassembling
processing equipment. It is effective on oil or gas
wells and on-stream work in refineries and plants.
Its sealing characteristics are aided by differential
pressure to form a seal-lock action from within
resulting in a permanent seal.

© 2012, BALMAR LLC


01/06/16

You might also like