Operating Instructions: Thermo Top Evo - B (Petrol) Thermo Top Evo - D (Diesel)
Operating Instructions: Thermo Top Evo - B (Petrol) Thermo Top Evo - D (Diesel)
Introduction
Dear Webasto Customer,
Thank you for choosing the Webasto Thermo Top Evo Water Heater.
We hope you will enjoy many years of additional comfort during your travels with it.
The Thermo Top Evo heater is used in conjunction with the original vehicle heating system
– to heat the passenger compartment,
– to defrost the vehicle windows and
– to preheat water-cooled engines.
We presume that the principle and mode of operation of your new heater has been explained
to your complete satisfaction by the workshop/service centre which installed the heater. In
these operating instructions we would like to once again provide you with an overview of the
safe use of the Thermo Top Evo heater.
To become familiar with and understand all functions of the heater, you must
read these operating instructions carefully.
Then you can be sure that you can use all functions to your satisfaction and
feel completely comfortable and safe.
If you should loose these instructions, please contact an authorised Webasto
dealer immediately to obtain a replacement copy.
Repair or maintenance work not described here may only be carried out by an
authorised Webasto dealer.
Note:
We recommend that the heating time be set in accordance with the driving time.
Heating time = driving time
Example: For a journey lasting approx. 20 minutes (one way), the duty period should
not exceed 20 minutes.
Maintenance
It is recommended that you have the vehicle maintained and checked at regular intervals by
an authorised Webasto dealer.
All repair or maintenance work must always be carried out by your authorised Webasto deal-
er. The dealer can also help with the specification of the required maintenance.
Warning.
A great deal of repair and maintenance work performed on the heater requires spe-
cialised knowledge and special tools. Incorrect settings and maintenance can lead to
damage to the heater or accidents resulting in serious damage.
• For optimum performance, your authorised Webasto dealer should check and perform the
necessary maintenance work on the heating system at least every 2 years regardless of use.
• The heater must be switched off prior to cleaning.
• The heater may NOT be cleaned with high-pressure cleaning systems or compressed air.
Faults
Action in the event of faults
If a fault occurs, check that the fuses and plug connections are in perfect condition and
secure.
When a fault occurs, the heater switches to the fault interlock; no error is indicated on the
heater control.
Always try to cancel the fault interlock before calling a Webasto service centre.
The following faults can be remedied directly by the user:
Heater switches off No combustion after Switch off heater and switch
automatically starting and restarting. on again (not more than
(= fault lock-out) Flame goes out during twice).
operation.
Heater does not switch on. Heater is without electric Check power supply to heater
power. and ground connections.
Heater switches off during Heater has overheated Refill coolant as directed by
operation (= fault lock-out). due to lack of coolant. manufacturer.
Part no. 9021174B • 11/09 • Modifications and errors excepted • Printed in Germany• © Webasto AG, GCS 2009
Webasto AG
Postfach 80
D - 82132 Stockdorf
Germany
National:
Hotline: 01805 951 159
(€ 0,14 aus dem deutschen Festnetz)
Hotmail: [email protected]
http://www.webasto.de
International:
http://www.webasto.com