2015 Product Catalogue

RESIDENTIAL, COMMERCIAL, AND GOLF IRRIGATION | Built on Innovation®

Petco Park — San Diego, California, USA

hunterindustries.com
YOUR SUCCESS
Is Our Inspiration

For three generations, the Hunter family has been dedicated to engineering
innovations for you, the irrigation professional. With more than 250 patents,
our goal is to ensure that all new products and enhancements are aimed at
making your job easier and more profitable. If they don’t, we won’t build them.

This year, we are proud to introduce three new products to take your business
to the next level. These innovations are designed to improve your bottom line,
and all of them are conservation focused, which is good for business and good
for the planet.

As always, we back our products with our world-class, in-house technical

support and customer service. From the manufacturing floor to our area
managers, we set the bar high because we know that you need more than
a high-quality manufacturer, you need a partner.
 Boston Public Gardens — Boston, Massachusetts, USA

Alexander’s Garden — Moscow, Russia

Tramway — France
Grand Mosque — Abu Dhabi, United Arab Emirates

San Diego, California, USA

National Stadium — Olympic Park, Beijing, China

 Napa Valley, California, USA Napa Valley, California, USA

TPC Cancun at Cancun Country Club — Cancun, Mexico

Siam Country Club, Plantation Course

Carnoustie Golf Links — Carnoustie, Scotland — Chon Buri, Thailand
MP800SR: THE ONLY
HIGH-EFFICIENCY SOLUTION
For Short-Radius Needs

Hunter Products

MP800SR-90, MPTOOL
You asked, we listened. Now, the popular features
of the MP Rotator® can be used in even the smallest
landscapes. Our engineering team spent years
perfecting the design of the MP800SR to include the
same high distribution uniformity and wind-resistant
streams of our other MP Rotator products.

We’re offering the MP800SR in two

models, the adjustable 90° to 210° arc
and a 360° full circle. The MP800SR
features a debris-resistant double-pop
design and construction with the highest-
quality materials available.

Now, you can use the whole family of

MP Rotators to solve virtually any overhead
watering need from 1.8 to 3.5 metres.
ELIMINATE GUESSWORK
With Hunter’s Soil-Clik™

Hunter Products

SOIL-CLIK, SOLAR-SYNC
Because climate conditions are only part of the picture,
many customers told us they’d like a device that monitors
the amount of moisture in the soil to complement
our other Clik sensors and Solar Sync®.

Soil-Clik™ Soil-Clik Probe

We responded with our new Soil-Clik, which The probe is easy to install—simply bury it at
senses moisture levels in the soil at the root any depth required by the root zone of the plant
zone, and prevents watering when user- material. Because the sensor is underground,
determined levels are adequate. Soil-Clik it is protected from damage by animals, sunlight,
has two components: a moisture sensor probe vandalism, foot traffic, mowers, and aerators.
which is placed in the soil, and an electronic
module which communicates with the probe
and the controller.

For total environmental awareness,

the Soil-Clik can be paired with Solar Sync.
Solar Sync will make ET-based adjustments
to run times and application amounts, while
Soil-Clik will ensure that Solar Sync never allows
irrigation when the soil is still wet. It’s a perfect
water-saving pairing, designed to make your
job easier, and to help conserve one of our
most precious natural resources.
PRO-C®
New Advanced
Features Help You
Build Your Business
We’ve improved the Pro-C with a dial position to easily accommodate
the Hunter Solar Sync® without additional wiring or modules. When
paired with Solar Sync, the Pro-C is an EPA WaterSense® labeled
smart device that will make automatic ET-based adjustments to
run times, saving water.

The Pro-C now comes with a 4-station base controller with expansion
to 16 stations. Plus, we added three built-in lighting programs which
enable the Pro-C to control landscape lighting as well.

Hunter Product

PRO-C
BLUEPRINT OF AN
Efficient Irrigation System

A properly designed, managed, and maintained irrigation

system is an essential tool for a healthy, functional landscape.
The Hunter products featured here will maximise the
effectiveness of the water you use.

PGP® Ultra & I-20 Drip/Micro Irrigation

Hunter rotors are the best choice when Drip irrigation is an efficient choice for certain landscape
watering a large turf or landscape area. situations. It applies water directly to the root zone area of
Our nozzles are engineered for excellent landscape plants, helping to limit excess irrigation. Micro
water distribution at low precipitation rates  spray emitters can be used to cover small planting beds
to keep a landscape looking its best, while efficiently.
still using water efficiently.

Pro-Spray® & Nozzles

Smaller areas require spray sprinklers Pro-C®/I-Core®
for proper watering. Hunter’s spray bodies The correct controller for the job is essential to meet the
are available with pressure regulation to needs of any landscape, from unpredictable weather to
ensure the most accurate watering of any municipal watering requirements. Having a customisable
landscape. Hunter’s spray nozzles are controller that is sensor compatible is the first step to a
meticulously engineered and tested to water-efficient system.
provide even watering and efficient use.

MP Rotator®
The ultimate solution for small- t o
medium-sized areas, this high-efficiency,
low precipitation rate sprinkler offers
unmatched performance and proven Flow-Clik®/Flow-Sync®
water savings up to 30% over sprays. Flow sensors prevent systems from
running when there is a leak or broken
component. The Flow-Clik will work
with most Hunter controllers to
suspend irrigation, and the Flow-Sync
is compatible with specific Hunter
PGV, ICV, & Drip Control Zone Kits controllers to m
 onitor overflow and 
Hunter’s trusted valve line ensures provide flow totaling for
system reliability and accuracy. better management.
Accu-Sync® can be used on
systems with excess pressure
to extend the life of the system
components and provide the
correct operating pressure to
the sprinklers. Drip kits are Solar Sync®
equipped with pressure regulators Solar Sync monitors weather,
and filters to provide drip and micro working with the controller to adjust
irrigation components with the correct the system for changing conditions,
pressure and contaminant-free water. ensuring water is n
 ot wasted.
SPRAY HEADS

ROTORS

MP ROTATORS

CONTROL VALVES

LANDSCAPE DRIPLINE

WEATHER SENSOR

FLOW SENSOR

CONTROLLER
Governor’s Mansion — Sacramento, California, USA
Table of

CONTENTS
ROTORS CONTROLLERS ACCESSORIES
20 PGJ 98 Eco Logic 142 Accessories
22 SRM 99 X-Core® 144 Tools
23 PGP® 100 Pro-C® & PCC NEW 145 Golf Tools
26 PGP® Ultra 102 I-Core®
27 I-20 103 DUAL®
31 I-25 104 ACC
GOLF ROTORS
34 I-40 106 ACC-99D 154 G900 Series
37 I-90 107 ICD-HP 156 G800 Series
39 ST System 108 ROAM 164 B Series
109 ROAM XL 171 Rotor Accessories
110 XC HYBRID 172 RT Series
MP ROTATOR®
111 NODE 173 HSJ Swing Joints
46 Eco Rotator 112 WVP & WVC
48 MP Rotator 113 PSR
52 MP Rotator SR NEW
CENTRAL CONTROL
CENTRAL 176 Pilot® Software
SPRAYS 178 Pilot Controller
116 IMMS® 180 Pilot Decoders
58 PS Ultra 182 Weather Station
61 Pro-Spray® SENSORS 183 Maintenance Radio
62 PRS30 183 ICD-HP
63 PRS40 122 Solar Sync®
123 Soil-Clik™ NEW
TECHNICAL INFORMATION
124 Rain-Clik®
NOZZLES 125 Mini-Clik® 186 Hunter Technical Services
65 Pro Adjustable Nozzles 125 Freeze-Clik® 187 Product Specialist Program
69 Pro-Spray® Fixed Arc Nozzles 126 Mini Weather Station 188 Replacement Guide
72 Short Radius Nozzles 126 Wind-Clik® 192 Precipitation Rates
73 Strip Pattern Nozzles 127 Flow-Clik® 193 Slope Equivalents/Irrigation
74 Stream Nozzles 128 Flow-Sync® 194 Height of Spray
75 Bubbler Nozzles 196 PLD Charts
76 Bubblers MICRO 197 Drip Control Zone Kit Charts
198 Conversion Factors
132 Eco-Mat® & PLD-ESD 199 Friction Loss Charts
VALVES
134 PLD-16 MM 207 Wire Data
82 1" PGV & PGV Jar Top 135 PLD-17 MM 208 Wire Sizing
84 PGV 136 Point Source Emitters 209 Additional Data
86 ICV 137 Micro Sprays
88 IBV 138 Drip Control Zone Kits
STATEMENT OF WARRANTY
90 Quick Couplers 139 RZWS
92 Accu-Sync® 210 Statement of Warranty
 16
ROTORS
SECTION 01:

ROTORS
ROTORS

17
 ROTORS
ADVANCED FEATURES
ROTORS

RELIABLE STRENGTH & DURABILITY EASY IN-THE-FIELD IDENTIFICATION

AUTOMATIC ARC RETURN RECLAIMED WATER ID

rn This patented feature returns the Purple caps indicate where non-potable
retu des
ire turret to the original arc regardless irrigation water is being used.
to
au d
ed of where it is turned. This ensures
se

orc PGJ, PGP Ultra, I-20, I-25, I-40, I-90

If f
ta

vandal protection in any environment.

rc

PGP® Ultra, I-20, I-25, I-40

STAINLESS STEEL RISER COLOUR-CODED NOZZLES

For unforgiving soil conditions, Nozzles are easier to differentiate
unpredictable climates, or heavy foot in the field for simple installation
traffic, stainless steel is the best choice. and quick organisation.
Standard on I-40 I-25, I-40, I-90
Optional on I-20 and I-25

NON-STRIPPABLE DRIVE
EASY AS-NEEDED ADJUSTMENTS
The patented, non-strippable, vandal-
proof drive mechanism enables the turret PART- AND FULL-CIRCLE IN ONE MODEL
to be turned without causing damage. 
Patented non-reversing 360°
PGP Ultra, I-20, I-25, I-40
for part- and full-circle in one
in 1 model, from 50° to 360°.
PGP Ultra, I-20, I-25, I-40

DRAIN CHECK VALVE FLOSTOP® CONTROL

The drain check valve keeps lines from FloStop closes the flow of water
draining when the system is shut off. from individual sprinkler heads while
This saves water, reduces liability, the system is running. This is ideal
and increases system life. for changing nozzles or turning off
specific heads during maintenance
PGJ, PGP Ultra, I-20, I-25, I-40, I-90
and construction.
I-20

HEADED AND SLOTTED SET SCREW

VALUE-ADDED OPTIONS
Use a slotted screwdriver or the
OPPOSING NOZZLE 360° Hunter wrench for easier and simpler
MODEL adjustments as needed.

The opposing nozzle design offers PGJ, PGP Ultra, I-20

excellent water distribution. With
primary and secondary nozzles on
opposing sides of the turret, streams
arc in opposite directions as the
sprinkler rotates for outstanding
mid-range and close-in watering.
I-40, I-90

18
ROTORS COMPARISON CHART

ROTORS
QUICK SPECS PGJ SRM PGP®-ADJ PGP ULTRA I-20 I-25 I-40 I-40-ON I-90

INLET SIZE ½" ½" ¾" ¾" ¾" 1" 1" 1" 1½"

RADIUS m 4.3–11.6 4.0–9.4 6.4–15.8 4.9–14.0 4.9–14.0 14.0–21.6 13.1–23.3 15.2–23.2 22.3–31.7

m /hr 0.13–1.23 0.08–0.82 0.10–3.22

3
0.07–3.23 0.07–3.23 0.82–7.24 1.63–6.84 2.75–7.76 6.7–19.04
FLOW
l/min 2.2–20.5 1.4–13.7 1.7–53.7 1.2–53.8 1.2–53.8 13.6–120.7 27.2–114.1 45.8–129.4 111.7–317.2

FEATURES
RECOMMENDED bar 1.7–3.8 1.7–3.8 1.7–4.5 1.7–4.5 1.7–4.5 2.5–7.0 2.8–7.0 2.8–7.0 5.5–8.0
PRESSURE RANGE kPa 170–380 170–380 170–450 170–450 170–450 250-700 280–700 280–700 550–800

OPERATING bar 1.4–7.0 1.4–7.0 1.4–7.0 1.4–7.0 1.4–7.0 2.8–6.9 2.5–7.0 2.5–7.0 5.0–8.0
PRESSURE RANGE kPa 140–700 140–700 140–700 140–700 140–700 280–690 250–700 250–700 500–800

NOZZLE TRAJECTORY 15° 15° 25° 25° 25° 25° 25° 25° 22.5°
Pre- Pre- Pre- Pre-
SPECIFIC NOZZLES --- --- --- Optional Optional
Installed Installed Installed Installed
NOZZLE OPTIONS 8 6 27 34 34 12 6 6 16

WARRANTY 2 Years 1 Year 2 Years 5 Years 5 Years 5 Years 5 Years 5 Years 5 Years

ADVANCED FEATURES
LOW ANGLE
⬤ ⬤ ⬤ ⬤
NOZZLE CHOICES
AUTOMATIC ARC
⬤ ⬤ ⬤ ⬤
RETURN
NON-STRIPPABLE DRIVE ⬤ ⬤ ⬤ ⬤
PART- AND FULL-CIRCLE IN
⬤ ⬤ ⬤ ⬤
ONE MODEL
HEADED AND SLOTTED
⬤ ⬤ ⬤
SET SCREW
RECLAIMED WATER ID ⬤ ⬤ ⬤ ⬤ ⬤ ⬤ ⬤
AVAILABLE SHORT
⬤ ⬤
RADIUS NOZZLES
FLOSTOP® CONTROL ⬤

OPPOSING NOZZLE ⬤ ⬤
STAINLESS STEEL
⬤ ⬤ ⬤ ⬤
RISER OPTION
OPTIONAL OR FACTORY
⬤ ⬤ ⬤ ⬤ ⬤ ⬤ ⬤
INSTALLED DRAIN
(2 m) (2 m) (3 m) (3 m) (4.5 m) (4.5 m) (2 m)
CHECK VALVE

19
 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 4.3 to 11.6 m

PGJ Flow: 0.13 to 1.23 m3/hr; 2.2 to 20.5 l/min
Inlet: ½"

FEATURES
• Models: Shrub, 10 cm, 15 cm, 30 cm
• Arc setting: 40° to 360°
• Nozzle choices: 8
ROTORS

PGJ-00
• Nozzle range: 0.75 to 5.0 Overall height: 18 cm
• Standard factory installed nozzle: 2.0 only Exposed diameter: 3 cm
Inlet size: ½"
• Factory installed rubber cover
• Through-the-top arc adjustment
• QuickCheck™ arc mechanism
• Water lubricated gear-drive
• Warranty period: 2 years
►► Headed and slotted set screw
►► Optional reclaimed water ID
►► Drain check valve PGJ-04
(up to 2 m of elevation) Overall height: 18 cm
Pop-up height: 10 cm
Exposed diameter: 3 cm
OPERATING SPECIFICATIONS Inlet size: ½"

• Radius: 4.3 to 11.6 m

• Flow: 0.13 to 1.23 m3/hr; 2.2 to 20.5 l/min
• Recommended pressure range: 1.7 to 3.8 bar; 170 to 380 kPa
• Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
• Precipitation rates: 15 mm/hr approximately
• Nozzle trajectory: 14° approximately

► = Advanced Feature descriptions on page 18

PGJ-06
Overall height: 23 cm
Pop-up height: 15 cm
Exposed diameter: 3 cm
Inlet size: ½"

PGJ Reclaimed
Available as a factory installed
option on all models

PGJ – SPECIFICATION BUILDER: ORDER 1 + 2 + 3

PGJ-12
1 Model 2 Standard Features 3 Feature Options Overall height: 41 cm
Pop-up height: 30 cm
PGJ-00 = Shrub Adjustable arc, (blank) = No option
8 standard nozzles
Exposed diameter: 3 cm
PGJ-04 = 10 cm Pop-up V = Drain check valve Inlet size: ½"

PGJ-06 = 15 cm Pop-up R = Drain check valve and

reclaimed water ID
PGJ-12 = 30 cm Pop-up (pop-up models only)

Examples:
PGJ-04 = 10 cm Pop-up, adjustable arc
PGJ-06 - V = 15 cm Pop-up, adjustable arc, with drain check valve
PGJ-12 - R = 30 cm Pop-up, adjustable arc, with drain check valve and reclaimed water ID

20 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

PGJ RED NOZZLE PERFORMANCE DATA PGJ NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
1.7 170 4.3 0.13 2.2 14 17
.75 2.0 200 4.6 0.14 2.4 14 16
Red 2.5 250 4.9 0.16 2.7 13 15

ROTORS
3.0 300 5.2 0.18 3.0 13 15
3.5 350 5.2 0.19 3.2 14 17
3.8 380 5.5 0.20 3.4 13 15
1.7 170 5.2 0.18 3.0 13 15
1.0 2.0 200 5.5 0.19 3.2 13 15
Red 2.5 250 5.5 0.21 3.5 14 16
3.0 300 5.8 0.23 3.8 14 16
3.5 350 5.8 0.24 4.1 15 17
3.8 380 6.1 0.25 4.2 14 16
1.7 170 6.1 0.27 4.5 15 17
1.5 2.0 200 6.4 0.29 4.8 14 16
Red 2.5 250 6.4 0.32 5.4 16 18
3.0 300 6.7 0.36 6.0 16 18
3.5 350 6.7 0.39 6.4 17 20
3.8 380 7.0 0.40 6.7 16 19
1.7 170 7.0 0.34 5.6 14 16
2.0 2.0 200 7.3 0.37 6.2 14 16
Red 2.5 250 7.3 0.42 7.1 16 18
3.0 300 7.6 0.48 8.0 17 19
3.5 350 7.6 0.53 8.8 18 21
3.8 380 7.9 0.56 9.3 18 20
1.7 170 7.9 0.46 7.6 15 17
2.5 2.0 200 8.2 0.49 8.1 14 17
Red 2.5 250 8.2 0.54 9.0 16 18
3.0 300 8.5 0.59 9.8 16 19
3.5 350 8.5 0.63 10.5 17 20
3.8 380 8.8 0.65 10.9 17 19
1.7 170 8.8 0.51 8.5 13 15
3.0 2.0 200 9.1 0.56 9.3 13 15
Red 2.5 250 9.1 0.64 10.6 15 18 PGJ
3.0 300 9.4 0.72 12.0 16 19
3.5 350 9.4 0.78 13.1 18 20
3.8 380 9.8 0.82 13.7 17 20
1.7 170 9.8 0.80 13.3 17 19
4.0 2.0 200 10.1 0.83 13.8 16 19
Red 2.5 250 10.1 0.89 14.8 18 20
3.0 300 10.4 0.94 15.7 17 20
3.5 350 10.4 0.98 16.3 18 21
3.8 380 10.7 1.00 16.7 18 20
1.7 170 10.7 1.02 17.0 18 21
5.0 2.0 200 11.0 1.06 17.6 18 20
Red 2.5 250 11.0 1.11 18.5 18 21
3.0 300 11.3 1.17 19.4 18 21
3.5 350 11.3 1.21 20.1 19 22
3.8 380 11.6 1.23 20.5 18 21

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 21

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 4.0 to 9.4 m

SRM Flow: 0.08 to 0.82 m3/hr; 1.4 to 13.7 l/min

Inlet: ½"

FEATURES
• Model: 10 cm
• Arc setting: 40° to 360°
• Nozzle choices: 6 SRM-04
ROTORS

• Nozzle range: 0.50 to 3.0 Overall height: 18 cm

Pop-up height: 10 cm
• Standard factory installed nozzle: 3.0 only Exposed diameter: 3 cm
• Through-the-top arc adjustment Inlet size: ½"
• QuickCheck™ arc mechanism
• Water lubricated gear-drive
• Warranty period: 1 year

OPERATING SPECIFICATIONS
• Radius: 4.0 to 9.4 m SRM GREEN NOZZLE PERFORMANCE DATA
• Flow: 0.08 to 0.82 m3/hr; 1.4 to 13.7 l/min Nozzle Pressure Radius Flow Precip mm/hr
• Recommended pressure range: 1.7 to 3.8 bar; 170 to 380 kPa bar kPa m m3/hr l/min
• Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa 1.7 170 4.0 0.08 1.4 11 12
• Precipitation rates: 11 mm/hr approximately .50 2.0 200 4.3 0.09 1.6 10 12
• Nozzle trajectory: 18° approximately Dk. Green 2.5 250 4.3 0.11 1.8 12 14
3.0 300 4.6 0.12 2.0 12 13
3.5 350 4.6 0.13 2.2 13 15
3.8 380 4.9 0.14 2.3 12 14
1.7 170 4.9 0.13 2.2 11 13
.75 2.0 200 5.2 0.14 2.4 11 12
Dk. Green 2.5 250 5.2 0.16 2.7 12 14
SRM SRM NOZZLES
3.0 300 5.5 0.18 3.0 12 14
Model Description 3.5 350 5.5 0.19 3.2 13 15
3.8 380 5.8 0.20 3.4 12 14
1.7 170 5.8 0.18 2.9 11 12
SRM-04
10 cm Pop-up, adjustable arc, 1.0 2.0 200 6.1 0.19 3.2 10 12
6 standard nozzles
Dk. Green 2.5 250 6.1 0.21 3.5 11 13
3.0 300 6.4 0.24 3.9 12 13
3.5 350 6.4 0.25 4.2 12 14
3.8 380 6.7 0.26 4.4 12 14
1.7 170 6.7 0.27 4.5 12 14
1.5 2.0 200 7.0 0.29 4.8 12 14
Dk. Green 2.5 250 7.0 0.32 5.4 13 15
3.0 300 7.3 0.36 6.0 13 16
3.5 350 7.3 0.39 6.5 15 17
SRM
3.8 380 7.6 0.40 6.7 14 16
1.7 170 7.3 0.35 5.8 13 15
2.0 2.0 200 7.9 0.38 6.3 12 14
Dk. Green 2.5 250 7.9 0.43 7.1 14 16
3.0 300 8.2 0.48 8.0 14 16
3.5 350 8.2 0.53 8.8 16 18
3.8 380 8.5 0.55 9.2 15 17
1.7 170 8.2 0.51 8.5 15 17
3.0 2.0 200 8.5 0.56 9.3 15 18
Dk. Green 2.5 250 8.5 0.64 10.6 17 20
3.0 300 9.1 0.72 12.0 17 20
3.5 350 9.1 0.78 13.1 19 22
3.8 380 9.4 0.82 13.7 18 21

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

22 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 6.4 to 15.8 m

PGP® Flow: 0.10 to 3.22 m3/hr; 1.7 to 53.7 l/min

Inlet: ¾"

FEATURES
• Model: 10 cm
• Arc setting: 40° to 360°
• Factory installed rubber cover PGP-ADJ

ROTORS
Overall height: 19 cm
• Through-the-top arc adjustment Pop-up height: 10 cm
• QuickCheck™ arc mechanism Exposed diameter: 4 cm
• Water lubricated gear-drive Inlet size: ¾"
• Nozzle choices: 27 total
• Nozzle racks: Red, Blue, Grey Low Angle
• Warranty period: 2 years

OPERATING SPECIFICATIONS
• Radius: 6.4 to 15.8 m
• Flow: 0.10 to 3.22 m3/hr; 1.7 to 53.7 l/min
• Recommended pressure range: 1.7 to 4.5 bar; 170 to 450 kPa
• Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
• Precipitation rates: 10 mm/hr approximately
• Nozzle trajectory: Standard = 25°, Low Angle = 13°

PGP-ADJ
Easy arc and radius adjustment

PGP-ADJ – SPECIFICATION BUILDER: ORDER 1 + 2 + 3

PGP Red Nozzle
1 Model 2 Standard Features 3 Feature Options

PGP-ADJ-B = 10 cm Pop-up Adjustable arc with Blue 1.5 to 4.0 = Factory-installed

nozzle rack Blue nozzle number

PGP-ADJ = 10 cm Pop-up Adjustable arc with Red #5 to #8 = Factory-installed

nozzle rack Red nozzle number

#7 = Factory-installed Red
nozzle number

Examples:
PGP-ADJ = 10 cm Pop-up, adjustable arc
PGP-ADJ-B - 3.0 = 10 cm Pop-up, adjustable arc, and #3.0 Blue nozzle
PGP-ADJ - 07 = 10 cm Pop-up, adjustable arc, and #7 Red nozzle

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 23

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

PGP GREY LOW ANGLE NOZZLE PERFORMANCE

PGP® BLUE NOZZLE PERFORMANCE DATA PGP NOZZLES
DATA
Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
1.7 170 8.8 0.27 4.5 7 8 1.7 170 6.4 0.30 4.9 14 17
1.5 2.0 200 9.1 0.29 4.8 7 8 4 2.0 200 6.7 0.32 5.3 14 16 Blue
Blue 2.5 250 9.4 0.32 5.4 7 8 LA 2.5 250 7.0 0.35 5.9 14 17 (P/N 665300)
ROTORS

3.0 300 9.8 0.35 5.9 7 9 Grey 3.0 300 7.3 0.39 6.5 15 17
3.5 350 9.8 0.38 6.4 8 9 3.5 350 7.9 0.42 7.0 13 15
4.0 400 9.8 0.41 6.8 9 10 4.0 400 8.5 0.45 7.5 12 14
4.5 450 9.4 0.43 7.2 10 11 4.5 450 8.5 0.47 7.9 13 15
1.7 170 10.1 0.32 5.4 6 7 1.7 170 7.3 0.33 5.6 12 14 Grey
2.0 2.0 200 10.1 0.35 5.8 7 8 5 2.0 200 7.6 0.36 6.0 12 14 (P/N 233200)
Blue 2.5 250 10.1 0.39 6.5 8 9 LA 2.5 250 7.9 0.40 6.7 13 15
3.0 300 10.4 0.43 7.2 8 9 Grey 3.0 300 8.2 0.45 7.4 13 15
3.5 350 10.4 0.47 7.8 9 10 3.5 350 8.5 0.48 8.0 13 15
4.0 400 10.4 0.50 8.3 9 11 4.0 400 8.8 0.52 8.6 13 15
4.5 450 10.4 0.53 8.8 10 11 4.5 450 9.1 0.55 9.1 13 15
1.7 170 10.1 0.39 6.6 8 9 1.7 170 8.8 0.44 7.3 11 13
2.5 2.0 200 10.4 0.43 7.1 8 9 6 2.0 200 9.1 0.47 7.9 11 13
Blue 2.5 250 10.7 0.48 8.0 8 10 LA 2.5 250 9.4 0.53 8.8 12 14
3.0 300 10.7 0.54 8.9 9 11 Grey 3.0 300 9.8 0.59 9.8 12 14
3.5 350 10.7 0.58 9.7 10 12 3.5 350 10.1 0.64 10.6 13 15
4.0 400 10.7 0.62 10.4 11 13 4.0 400 10.7 0.68 11.3 12 14
4.5 450 10.7 0.66 11.1 12 13 4.5 450 10.7 0.72 12.0 13 15
1.7 170 10.7 0.50 8.4 9 10 1.7 170 8.5 0.58 9.7 16 18
3.0 2.0 200 10.7 0.54 9.1 10 11 7 2.0 200 8.8 0.62 10.3 16 18
Blue 2.5 250 11.0 0.61 10.2 10 12 LA 2.5 250 9.4 0.68 11.4 15 18
3.0 300 11.6 0.68 11.4 10 12 Grey 3.0 300 10.1 0.75 12.5 15 17
3.5 350 11.9 0.74 12.3 10 12 3.5 350 10.7 0.80 13.3 14 16
4.0 400 11.9 0.79 13.2 11 13 4.0 400 11.3 0.85 14.1 13 15
4.5 450 11.9 0.84 14.0 12 14 4.5 450 11.3 0.89 14.8 14 16
1.7 170 11.3 0.68 11.3 11 12 1.7 170 9.1 0.71 11.8 17 20
4.0 2.0 200 11.6 0.73 12.2 11 13 8 2.0 200 9.4 0.76 12.7 17 20
Blue 2.5 250 11.9 0.81 13.6 12 13 LA 2.5 250 9.8 0.84 14.1 18 20
3.0 300 12.2 0.90 15.0 12 14 Grey 3.0 300 10.4 0.93 15.5 17 20
3.5 350 12.2 0.97 16.2 13 15 3.5 350 11.3 1.00 16.6 16 18
4.0 400 12.5 1.04 17.3 13 15 4.0 400 11.6 1.06 17.6 16 18
4.5 450 12.5 1.10 18.3 14 16 4.5 450 11.6 1.12 18.6 17 19
1.7 170 11.3 0.84 14.0 13 15 1.7 170 9.8 0.89 14.9 19 22
5.0 2.0 200 11.6 0.91 15.2 14 16 9 2.0 200 10.1 0.96 16.0 19 22
Blue 2.5 250 11.9 1.02 17.1 15 17 LA 2.5 250 10.7 1.07 17.9 19 22
3.0 300 12.8 1.14 19.0 14 16 Grey 3.0 300 11.3 1.19 19.8 19 22
3.5 350 12.8 1.24 20.6 15 17 3.5 350 12.2 1.28 21.3 17 20
4.0 400 12.8 1.32 22.1 16 19 4.0 400 12.8 1.37 22.8 17 19
4.5 450 12.8 1.41 23.4 17 20 4.5 450 12.8 1.45 24.1 18 20
1.7 170 11.6 1.01 16.8 15 17 1.7 170 10.1 1.17 19.5 23 27
6.0 2.0 200 11.9 1.09 18.2 15 18 10 2.0 200 10.7 1.26 21.0 22 26
Blue 2.5 250 12.2 1.22 20.4 16 19 LA 2.5 250 11.3 1.40 23.4 22 25
3.0 300 13.1 1.36 22.7 16 18 Grey 3.0 300 11.6 1.55 25.9 23 27
3.5 350 13.1 1.47 24.5 17 20 3.5 350 12.2 1.67 27.8 22 26
4.0 400 13.4 1.57 26.2 18 20 4.0 400 12.8 1.78 29.7 22 25
4.5 450 13.4 1.67 27.9 19 21 4.5 450 12.8 1.89 31.4 23 27
1.7 170 11.3 1.35 22.5 21 25
8.0 2.0 200 11.9 1.46 24.3 21 24 Note:
All precipitation rates calculated for 180° operation. For the
Blue 2.5 250 12.5 1.63 27.2 21 24
precipitation rate for a 360° sprinkler, divide by 2.
3.0 300 13.4 1.81 30.2 20 23
3.5 350 13.7 1.95 32.6 21 24
4.0 400 14.0 2.09 34.8 21 25
4.5 450 14.0 2.22 36.9 23 26

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

24 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

PGP® RED NOZZLE PERFORMANCE DATA PGP RED NOZZLE PERFORMANCE DATA PGP NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
1.7 170 8.2 0.10 1.7 3 3 1.7 170 11.0 0.66 11.0 11 13
1 2.0 200 8.5 0.11 1.8 3 3
8 2.0 200 11.3 0.71 11.8 11 13 Red (P/N 130900)
Red 2.5 250 8.5 0.13 2.1 4 4 Red 2.5 250 11.6 0.79 13.2 12 14
3.0 300 8.8 0.15 2.4 4 4 3.0 300 11.9 0.87 14.5 12 14

ROTORS
3.5 350 8.8 0.16 2.7 4 5 3.5 350 12.5 0.94 15.6 12 14
4.0 400 9.1 0.18 2.9 4 5 4.0 400 12.5 1.00 16.6 13 15
4.5 450 9.1 0.19 3.2 5 5 4.5 450 12.8 1.05 17.6 13 15
1.7 170 8.5 0.14 2.4 4 5 1.7 170 11.3 0.73 12.2 11 13
2 2.0 200 8.8 0.16 2.6 4 5
9 2.0 200 11.6 0.80 13.4 12 14
Red 2.5 250 8.8 0.17 2.9 4 5 Red 2.5 250 11.6 0.92 15.4 14 16
3.0 300 9.1 0.19 3.2 5 5 3.0 300 12.5 1.05 17.5 13 16
3.5 350 9.1 0.21 3.5 5 6 3.5 350 13.4 1.15 19.2 13 15
4.0 400 9.4 0.22 3.7 5 6 4.0 400 13.4 1.25 20.9 14 16
4.5 450 9.4 0.23 3.9 5 6 4.5 450 13.7 1.35 22.4 14 17
1.7 170 8.8 0.18 3.0 5 5 2.0 200 12.2 1.14 19.0 15 18
3 2.0 200 9.1 0.20 3.3 5 5
10 2.5 250 12.8 1.29 21.4 16 18
Red 2.5 250 9.1 0.22 3.7 5 6 Red 3.0 300 13.4 1.44 24.0 16 18
3.0 300 9.4 0.25 4.1 6 6 3.5 350 14.0 1.56 26.1 16 18
3.5 350 9.4 0.27 4.5 6 7 4.0 400 14.3 1.68 28.0 16 19
4.0 400 9.8 0.29 4.8 6 7 4.5 450 14.3 1.79 29.9 17 20
4.5 450 9.8 0.31 5.1 6 7 5.0 500 14.6 1.90 31.7 18 21
1.7 170 9.4 0.24 4.1 5 6 2.0 200 12.8 1.55 25.9 19 22
4 2.0 200 9.8 0.27 4.4 6 6
11 2.5 250 13.7 1.73 28.7 18 21
Red 2.5 250 9.8 0.30 5.0 6 7 Red 3.0 300 14.0 1.90 31.7 19 22
3.0 300 10.1 0.34 5.6 7 8 3.5 350 14.6 2.05 34.1 19 22
3.5 350 10.1 0.37 6.2 7 8 4.0 400 14.9 2.18 36.3 20 23
4.0 400 10.4 0.40 6.6 7 9 4.5 450 15.2 2.30 38.4 20 23
4.5 450 10.4 0.43 7.1 8 9 5.0 500 15.5 2.42 40.4 20 23
1.7 170 10.1 0.33 5.5 7 8 2.0 200 12.8 2.03 33.8 25 29
5 2.0 200 10.4 0.36 5.9 7 8
12 2.5 250 13.4 2.26 37.7 25 29
Red 2.5 250 10.4 0.39 6.5 7 8 Red 3.0 300 14.3 2.51 41.8 24 28
3.0 300 11.0 0.43 7.2 7 8 3.5 350 14.6 2.70 45.0 25 29
3.5 350 11.6 0.46 7.7 7 8 4.0 400 14.9 2.88 48.1 26 30
4.0 400 11.6 0.49 8.1 7 8 4.5 450 15.2 3.06 50.9 26 30
4.5 450 11.6 0.51 8.6 8 9 5.0 500 15.8 3.22 53.7 26 30
1.7 170 10.1 0.42 6.9 8 10
6 2.0 200 10.4 0.45 7.5 8 10 Note:
Red 2.5 250 10.7 0.51 8.5 9 10 All precipitation rates calculated for 180° operation. For the
3.0 300 11.0 0.57 9.4 9 11 precipitation rate for a 360° sprinkler, divide by 2.
3.5 350 11.6 0.61 10.2 9 11
4.0 400 11.6 0.66 10.9 10 11
4.5 450 11.9 0.70 11.6 10 11
1.7 170 10.1 0.54 9.0 11 12
7 2.0 200 10.4 0.58 9.7 11 12
Red 2.5 250 11.0 0.65 10.8 11 12
3.0 300 11.6 0.72 12.0 11 12
3.5 350 12.2 0.78 12.9 10 12
4.0 400 12.2 0.83 13.8 11 13
4.5 450 12.2 0.88 14.6 12 14

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 25

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 4.9 to 14.0 m

PGP® ULTRA Flow: 0.07 to 3.23 m3/hr; 1.2 to 53.8 l/min

Inlet: ¾"

FEATURES
• Models: Shrub, 10 cm, 30 cm
• Arc setting: 50° to 360°
PGP-00
• Factory installed rubber cover
ROTORS

Overall height: 19 cm
• Through-the-top arc adjustment Exposed diameter: 4.5 cm
Inlet size: ¾"
• QuickCheck™ arc mechanism
• Water lubricated gear-drive
• Nozzle choices: 22
• Nozzle racks: 1.5 to 8.0 Blue, 2.0 Low Angle to 4.0 Low Angle Grey,
0.50 Short Radius to 3.0 Short Radius Black, 6.0 to 13.0 Green,
MPR-20, MPR-30, MPR-35
• Warranty period: 5 years
►► Automatic arc return
►► Non-strippable drive PGP-04
►► Part- and full-circle in one model Overall height: 19 cm
Pop-up height: 10 cm
►► Headed and slotted set screw Exposed diameter: 4.5 cm
►► Optional reclaimed water ID Inlet size: ¾"
►► Drain check valve (up to 3 m of elevation)

OPERATING SPECIFICATIONS
• Radius: 4.9 to 14.0 m
• Flow: 0.07 to 3.23 m3/hr; 1.2 to 53.8 l/min
• Recommended pressure range: 1.7 to 4.5 bar; 170 to 450 kPa
• Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
• Precipitation rates: 10 mm/hr approximately
• Nozzle trajectory: Standard = 25°, Low Angle = 13°
PGP-12
► = Advanced Feature descriptions on page 18 Overall height: 43 cm
Pop-up height: 30 cm
Exposed diameter: 4.5 cm
Inlet size: ¾"
PGP Ultra Reclaimed
PGP Ultra
Available as a factory installed
Easy arc and radius adjustment
option on all models

PGP-ULTRA - SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

PGP-00 = Shrub Adjustable arc, plastic riser, 8 standard CV = Drain check valve Blue 1.5 - 8.0
nozzles, and 4 low angle nozzles
Grey Low Angle
PGP-04 = 10 cm Pop-up CV-R = Drain check valve and reclaimed water ID
Black Short Radius
Green High Flow
PGP-12 = 30 cm Pop-up
MPR-25-Q, T, H, F
MPR-30-Q, T, H, F
MPR-35-Q, T, H, F
1.5 to 4.0 = only nozzles 1.5 - 4.0
can be factory-installed

Examples:
PGP-04 = 10 cm Pop-up, adjustable arc
PGP-04 - 2.5 = 10 cm Pop-up, adjustable arc and 2.5 nozzle
PGP-12 - CV-R - 4.0 = 30 cm Pop-up, adjustable arc, with drain check valve and reclaimed water ID with 4.0 nozzle

26 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 4.9 to 14.0 m

I-20 Flow: 0.07 to 3.23 m3/hr; 1.2 to 53.8 l/min

Inlet: ¾"

FEATURES
• Models plastic riser: Shrub, 10 cm, ►► Automatic arc return
15 cm, 30 cm ►► Non-strippable drive
• Models stainless steel riser: 10 cm, 15 cm

ROTORS
►► Part- and full-circle in one model I-20-00
• Arc setting: 50° to 360° ►► Headed and slotted set screw Overall height: 12 cm
• Factory installed rubber cover Exposed diameter: 4.5 cm
►► FloStop® control
Inlet size: ¾"
• Through-the-top arc adjustment ►► Optional reclaimed water ID
• QuickCheck™ arc mechanism ►► Stainless steel riser
• Water lubricated gear-drive ►► Drain check valve (up to 3 m of elevation)
• Nozzle choices: 22
• Nozzle racks: 1.5 to 8.0 Blue,
2.0 to 4.0 Low Angle Grey, 0.50 to 3.0 I-20-04
Short Radius Black, 6.0 to 13.0 Green, Overall height: 19 cm
MPR-20, MPR-30, MPR-35 Pop-up height: 10 cm
• Warranty period: 5 years Exposed diameter: 4.5 cm
Inlet size: ¾"

OPERATING SPECIFICATIONS
• Radius: 4.9 to 14.0 m
• Flow: 0.07 to 3.23 m3/hr; 1.2 to 53.8 l/min
• Recommended pressure range: 1.7 to 4.5 bar; 170 to 450 kPa
• Operating pressure range: 1.4 to 7.0 bar; 140 to 700 kPa
• Precipitation rates: 10 mm/hr approximately I-20-06
I-20 Reclaimed Overall height: 25 cm
• Nozzle trajectory: Standard = 25°, Low angle = 13°
Available as a factory Pop-up height: 15 cm
installed option on all models Exposed diameter: 4.5 cm
► = Advanced Feature descriptions on page 18
Inlet size: ¾"

I-20 (PLASTIC) - SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-20-00 = Shrub Adjustable arc, plastic, (blank) = no option Blue 1.5 - 8.0
check valve, 8 standard Grey Low Angle
I-20-04 = 10 cm Pop-up nozzles, and 4 low-angle NCV = Without check valve Black Short Radius
nozzles (only available on 10 cm Green High Flow
I-20-12
I-20-06 = 15 cm Pop-up model) MPR-25-Q, T, H, F
MPR-30-Q, T, H, F Overall height: 43 cm
R = Reclaimed water ID MPR-35-Q, T, H, F Pop-up height: 30 cm
I-20-12 = 30 cm Pop-up
1.5 to 4.0 = only nozzles 1.5 - 4.0 Exposed diameter: 4.5 cm
can be factory-installed Inlet size: ¾"

I-20 (STAINLESS STEEL) - SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-20-04-SS = 10 cm Adjustable arc, stain- (blank) = no option Blue 1.5 - 8.0

Pop-up less steel, check valve, 8 Grey Low Angle
NCV = Without check valve Black Short Radius
standard nozzles, and 4
(only available on 10 cm Green High Flow
I-20-06-SS = 15 cm low-angle nozzles
model) MPR-25-Q, T, H, F
Pop-up
R = Reclaimed water ID MPR-30-Q, T, H, F
MPR-35-Q, T, H, F
1.5 to 4.0 = only nozzles 1.5 - 4.0
can be factory-installed

Examples:
I-20-04 = 10 cm Pop-up, adjustable arc
I-20-12 - R - 4.0 = 30 cm Pop-up, adjustable arc, check valve, with reclaimed water ID, and 4.0 nozzle
I-20-06-SS - R - 3.0 = 15 cm Pop-up, adjustable arc, stainless steel riser, with reclaimed water ID,
and 3.0 nozzle

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 27

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

PGP® ULTRA / I-20 BLUE STANDARD NOZZLE PGP ULTRA / I-20 GREY LOW ANGLE PGP ULTRA / I-20
PERFORMANCE DATA NOZZLE PERFORMANCE DATA NOZZLES
Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
1.7 170 8.8 0.27 4.5 7 8 1.7 170 7.3 0.33 5.6 12 14
1.5 2.0 200 9.1 0.29 4.8 7 8 2.0 2.0 200 7.6 0.36 6.0 12 14 Blue Standard /
Blue 2.5 250 9.4 0.32 5.4 7 8 LA 2.5 250 7.9 0.40 6.7 13 15 Grey Low Angle
(P/N 782900)
ROTORS

3.0 300 9.8 0.35 5.9 7 9 Grey 3.0 300 8.2 0.45 7.4 13 15
3.5 350 9.8 0.38 6.4 8 9 3.5 350 8.5 0.48 8.0 13 15
4.0 400 9.8 0.41 6.8 9 10 4.0 400 8.8 0.52 8.6 13 15 Nozzle screw allows
4.5 450 9.4 0.43 7.2 10 11 4.5 450 9.1 0.55 9.1 13 15 you to adjust the way
1.7 170 10.1 0.32 5.4 6 7 1.7 170 7.9 0.44 7.3 14 16 you want to. Square
2.0 2.0 200 10.1 0.35 5.8 7 8
2.5 2.0 200 8.2 0.47 7.9 14 16 top nozzle makes

Blue 2.5 250 10.1 0.39 6.5 8 9 LA 2.5 250 8.8 0.53 8.8 14 16
installation easy.
3.0 300 10.4 0.43 7.2 8 9 Grey 3.0 300 9.4 0.59 9.8 13 15
3.5 350 10.4 0.47 7.8 9 10 3.5 350 10.1 0.64 10.6 13 15
4.0 400 10.4 0.50 8.3 9 11 4.0 400 10.4 0.68 11.3 13 15
4.5 450 10.4 0.53 8.8 10 11 4.5 450 10.7 0.72 12.0 13 15
1.7 170 10.1 0.39 6.6 8 9 1.7 170 8.5 0.58 9.7 16 18
2.5 2.0 200 10.4 0.43 7.1 8 9 3.5 2.0 200 8.8 0.62 10.3 16 18
Blue 2.5 250 10.7 0.48 8.0 8 10 LA 2.5 250 9.1 0.68 11.4 16 19
3.0 300 10.7 0.54 8.9 9 11 Grey 3.0 300 10.1 0.75 12.5 15 17
3.5 350 10.7 0.58 9.7 10 12 3.5 350 10.7 0.80 13.3 14 16
4.0 400 10.7 0.62 10.4 11 13 4.0 400 11.0 0.85 14.1 14 16
4.5 450 10.7 0.66 11.1 12 13 4.5 450 11.3 0.89 14.8 14 16
1.7 170 10.7 0.50 8.4 9 10 1.7 170 8.2 0.71 11.8 21 24
3.0 2.0 200 10.7 0.54 9.1 10 11
4.0 2.0 200 8.8 0.76 12.7 19 23
Blue 2.5 250 11.0 0.61 10.2 10 12 LA 2.5 250 9.1 0.84 14.1 20 23
3.0 300 11.6 0.68 11.4 10 12 Grey 3.0 300 10.1 0.93 15.5 18 21
3.5 350 11.9 0.74 12.3 10 12 3.5 350 10.7 1.00 16.6 18 20
4.0 400 11.9 0.79 13.2 11 13 4.0 400 11.0 1.06 17.6 18 20
4.5 450 11.9 0.84 14.0 12 14 4.5 450 11.3 1.12 18.6 18 20
1.7 170 11.3 0.68 11.3 11 12
4.0 2.0 200 11.6 0.73 12.2 11 13
Blue 2.5 250 11.9 0.81 13.6 12 13
3.0 300 12.2 0.90 15.0 12 14
3.5 350 12.2 0.97 16.2 13 15
4.0 400 12.5 1.04 17.3 13 15
4.5 450 12.5 1.10 18.3 14 16
1.7 170 11.3 0.84 14.0 13 15
5.0 2.0 200 11.6 0.91 15.2 14 16 PGP Ultra
Blue 2.5 250 11.9 1.02 17.1 15 17
3.0 300 12.8 1.14 19.0 14 16
3.5 350 12.8 1.24 20.6 15 17
4.0 400 12.8 1.32 22.1 16 19
4.5 450 12.8 1.41 23.4 17 20
1.7 170 11.6 1.01 16.8 15 17
6.0 2.0 200 11.9 1.09 18.2 15 18
Blue 2.5 250 12.2 1.22 20.4 16 19
3.0 300 13.1 1.36 22.7 16 18
3.5 350 13.1 1.47 24.5 17 20
4.0 400 13.4 1.57 26.2 18 20
4.5 450 13.4 1.67 27.9 19 21
1.7 170 11.3 1.35 22.5 21 25
8.0 2.0 200 11.9 1.46 24.3 21 24
Blue 2.5 250 12.5 1.63 27.2 21 24
3.0 300 13.4 1.81 30.2 20 23
3.5 350 13.7 1.95 32.6 21 24
4.0 400 14.0 2.09 34.8 21 25
4.5 450 14.0 2.22 36.9 23 26

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

28 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

PGP® ULTRA / I-20 GREEN HIGH FLOW PGP ULTRA / I-20 BLACK SHORT RADIUS NOZZLE PGP ULTRA / I-20
NOZZLE PERFORMANCE DATA PERFORMANCE DATA NOZZLES
Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
1.7 170 10.7 1.48 24.6 26 30 1.7 170 4.9 0.07 1.2 6 7
10 2.0 200 11.9 1.60 26.7 23 26 .50 2.0 200 5.2 0.08 1.3 6 7
2.5 250 12.5 1.80 30.0 23 27 SR 2.5 250 5.2 0.09 1.5 7 8 Dk. Green
High Flow

ROTORS
Dk. Green 3.0 300 12.8 2.01 33.5 25 28 Black 3.0 300 5.2 0.10 1.7 8 9
3.5 350 13.1 2.18 36.3 25 29 3.5 350 5.5 0.12 1.9 8 9 (P/N 444800)
4.0 400 13.7 2.34 39.0 25 29 4.0 400 5.5 0.13 2.1 8 10
4.5 450 14.0 2.49 41.5 25 29 4.5 450 5.5 0.14 2.3 9 10
1.7 170 11.0 1.91 31.9 32 37 1.7 170 4.9 0.16 2.7 14 16
13 2.0 200 12.2 2.08 34.6 28 32
1.0 2.0 200 5.2 0.17 2.9 13 15
Dk. Green 2.5 250 12.8 2.34 38.9 29 33 SR 2.5 250 5.2 0.19 3.2 14 17
Black Short Radius
3.0 300 13.1 2.61 43.4 30 35 Black 3.0 300 5.2 0.21 3.6 16 18 (P/N 466100)
3.5 350 13.4 2.83 47.1 31 36 3.5 350 5.5 0.23 3.8 15 18
4.0 400 13.7 3.03 50.5 32 37 4.0 400 5.5 0.25 4.1 16 19
4.5 450 14.0 3.23 53.8 33 38 4.5 450 5.5 0.26 4.3 17 20
1.7 170 9.1 0.86 14.3 21 24 1.7 170 4.9 0.28 4.7 24 27
6.0 2.0 200 9.4 0.94 15.6 21 24 2.0 2.0 200 5.2 0.31 5.2 23 27
LA 2.5 250 10.1 1.07 17.8 21 24 SR 2.5 250 5.2 0.36 6.0 27 31
Dk. Green 3.0 300 10.7 1.20 20.0 21 24 Black 3.0 300 5.2 0.41 6.9 31 35
3.5 350 11.3 1.31 21.9 21 24 3.5 350 5.5 0.45 7.6 30 35
4.0 400 11.6 1.42 23.6 21 24 4.0 400 5.5 0.49 8.2 33 38
4.5 450 11.9 1.52 25.3 21 25 4.5 450 5.5 0.53 8.9 35 41
1.7 170 10.1 1.17 19.5 23 27 1.7 170 6.7 0.12 2.0 5 6
8.0 2.0 200 10.7 1.28 21.3 22 26
.75 2.0 200 7.0 0.13 2.2 5 6
LA 2.5 250 11.3 1.44 24.0 23 26 SR 2.5 250 7.0 0.15 2.4 6 7
Dk. Green 3.0 300 11.6 1.61 26.9 24 28 Black 3.0 300 7.3 0.16 2.7 6 7
3.5 350 11.9 1.76 29.3 25 29 3.5 350 7.6 0.17 2.9 6 7
4.0 400 12.5 1.89 31.5 24 28 4.0 400 7.6 0.19 3.1 6 7
4.5 450 12.5 2.01 33.6 26 30 4.5 450 7.6 0.20 3.3 7 8
1.7 170 6.7 0.23 3.8 10 12
1.5 2.0 200 7.0 0.25 4.1 10 12
SR 2.5 250 7.0 0.28 4.6 11 13
Black 3.0 300 7.3 0.31 5.2 12 13
3.5 350 7.6 0.34 5.6 12 13
4.0 400 7.6 0.36 6.0 12 14
4.5 450 7.6 0.39 6.4 13 15
1.7 170 6.7 0.53 8.9 24 27
I-20 with Blue Standard Nozzle
3.0 2.0 200 7.0 0.56 9.3 23 26
SR 2.5 250 7.0 0.60 10.0 24 28
Black 3.0 300 7.3 0.64 10.7 24 28
3.5 350 7.6 0.67 11.2 23 27
4.0 400 7.6 0.70 11.7 24 28
4.5 450 7.6 0.73 12.1 25 29

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 29

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

PGP® ULTRA / I-20 MPR-25 NOZZLE MPR-25 PGP ULTRA / I-20 MPR-35 NOZZLE MPR-35
PERFORMANCE DATA NOZZLE PERFORMANCE DATA NOZZLE
Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
1.7 170 7.0 0.17 3.0 13.7 15.8 1.7 170 9.8 0.32 5.4 13.4 15.4
90° 2.4 240 7.3 0.20 3.6 14.9 17.3 90° 2.4 240 10.4 0.38 6.6 14.1 16.3
3.1 310 7.6 0.23 3.6 15.6 18.1 3.1 310 10.7 0.44 7.2 15.3 17.7
ROTORS

3.8 380 7.6 0.25 4.2 17.4 20.1 3.8 380 10.7 0.48 7.8 17.0 19.6
4.5 450 7.6 0.27 4.8 18.9 21.9 4.5 450 10.7 0.52 9.0 18.4 21.3
1.7 170 7.0 0.23 3.6 13.9 16.0 1.7 170 9.8 0.40 6.6 12.7 14.6
120° 120°
2.4 240 7.3 0.27 4.8 15.4 17.8 2.4 240 10.4 0.49 8.4 13.6 15.8
3.1
3.8
310
380
7.6
7.6
0.31
0.35
5.4
6.0
16.2
18.0
18.7
20.7
NEW 3.1
3.8
310
380
10.7
10.7
0.56
0.62
9.6
10.2
14.7
16.4
17.0
18.9
NEW
4.5 450 7.6 0.38 6.6 19.6 22.6 4.5 450 10.7 0.68 11.4 17.9 20.7
1.7 170 7.0 0.33 5.4 13.3 15.4 1.7 170 9.8 0.62 10.2 13.1 15.2
180° 2.4 240 7.3 0.39 6.6 14.7 17.0 180° 2.4 240 10.4 0.76 12.6 14.1 16.3
3.1 310 7.6 0.45 7.2 15.5 17.9 3.1 310 10.7 0.87 14.4 15.2 17.6
3.8 380 7.6 0.50 8.4 17.3 20.0 3.8 380 10.7 0.96 16.2 16.9 19.5
4.5 450 7.6 0.55 9.0 18.9 21.8 4.5 450 10.7 1.05 17.4 18.4 21.3
1.7 170 7.0 0.63 10.8 12.8 14.8 1.7 170 9.8 1.22 20.4 12.8 14.8
360° 360°
2.4 240 7.3 0.76 12.6 14.2 16.4 2.4 240 10.4 1.50 25.2 14.0 16.2
3.1 310 7.6 0.87 14.4 14.9 17.3 3.1 310 10.7 1.72 28.8 15.1 17.5
3.8 380 7.6 0.97 16.2 16.6 19.2 3.8 380 10.7 1.91 31.8 16.8 19.4
4.5 450 7.6 1.05 17.4 18.1 20.9 4.5 450 10.7 2.09 34.8 18.3 21.2

PGP ULTRA / I-20 MPR-30 NOZZLE MPR-30

PERFORMANCE DATA NOZZLE
Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min
1.7 170 8.8 0.23 3.6 12.0 13.8
90° 2.4 240 9.1 0.28 4.8 13.4 15.4
3.1 310 9.1 0.32 5.4 15.2 17.6
3.8 380 9.1 0.35 6.0 17.0 19.6
4.5 450 9.1 0.38 6.6 18.4 21.2
1.7 170 8.8 0.30 4.8 11.7 13.5
120°
2.4 240 9.1 0.37 6.0 13.2 15.2
3.1
3.8
310
380
9.1
9.1
0.42
0.47
7.2
7.8
15.1
16.8
17.4
19.4
NEW
4.5 450 9.1 0.51 8.4 18.3 21.1
1.7 170 8.8 0.49 8.4 12.5 14.4
180° 2.4 240 9.1 0.59 9.6 14.1 16.2
3.1 310 9.1 0.67 11.4 16.1 18.6
3.8 380 9.1 0.75 12.6 17.9 20.7
4.5 450 9.1 0.82 13.8 19.6 22.6
1.7 170 8.8 0.96 16.2 12.3 14.2
360°
2.4 240 9.1 1.15 19.2 13.8 15.9
3.1 310 9.1 1.31 21.6 15.7 18.1
3.8 380 9.1 1.45 24.0 17.4 20.0
4.5 450 9.1 1.57 26.4 18.8 21.7

Note:
All precipitation rates calculated for 180 degree operation. For the
precipitation rate for a 360 degree sprinkler, divide by 2.

30 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 11.9 to 21.6 m

I-25 Flow: 0.82 to 7.24 m3/hr; 13.6 to 120.7 l/min

Inlet: 1" BSP

FEATURES
• Models plastic riser: 10 cm, 15 cm ►► Automatic arc return
• Models stainless steel riser: 10 cm, 15 cm ►► Non-strippable drive
• Arc setting: 50° to 360° ►► Part- and full-circle in one model

ROTORS
• Factory installed rubber cover ►► Colour-coded nozzles
• Through-the-top arc adjustment ►► Stainless steel riser I-25-04
Overall height: 20 cm
• QuickCheck™ arc mechanism ►► Drain check valve Pop-up height: 10 cm
• Water lubricated gear-drive (up to 3 m of elevation) Exposed diameter: 5 cm
• Nozzle choices: 12 Inlet size: 1" BSP

• Nozzle range: #4 to #28

• Warranty period: 5 years

OPERATING SPECIFICATIONS
• Radius: 11.9 to 21.6 m
• Flow: 0.82 to 7.24 m3/hr; 13.6 to 120.7 l/min
• Recommended pressure range: 2.5 to 7.0 bar; 250 to 700 kPa
• Operating pressure range: 2.5 to 7.0 bar; 250 to 700 kPa
• Precipitation rates: 15 mm/hr approximately I-25-06
• Nozzle trajectory: 25° Overall height: 26 cm
Pop-up height: 15 cm
► = Advanced Feature descriptions on page 18 Exposed diameter: 5 cm
Inlet size: 1" BSP

I-25 Reclaimed
Available as a factory installed
option on all models

I-25 (PLASTIC) - SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-25-04 = 10 cm Pop-up Adjustable arc, plastic riser, check B = BSP inlet threads #4 - #28 = Factory installed
valve, and 5 nozzles nozzle number
I-25-06 = 15 cm Pop-up R = Reclaimed water ID

I-25 (STAINLESS STEEL) - SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-25-04-SS = 10 cm Pop-up Adjustable arc, stainless steel riser, B = BSP inlet threads #4 - #28 = Factory installed
check valve, and 5 nozzles nozzle number
I-25-06-SS = 15 cm Pop-up
R = Reclaimed water ID

HS = High-Speed

HS-R = High-speed and reclaimed water ID

Examples:
I-25-04 - B = 10 cm Pop-up, adjustable arc, BSP inlet threads
I-25-04-SS - R - B - 18 = 10 cm Pop-up, adjustable arc, stainless steel riser, reclaimed water ID, and #18 nozzle, BSP inlet threads
I-25-06-SS - B = 15 cm Pop-up, adjustable arc, stainless steel riser, BSP inlet threads

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 31

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

I-25 STANDARD NOZZLE PERFORMANCE DATA I-25 NOZZLE

Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
2.5 250 11.9 0.82 13.6 12 13 3.0 300 16.8 2.86 47.7 20 24
4 3.0 300 12.2 0.91 15.2 12 14
15 3.5 350 17.1 3.05 50.8 21 24
Yellow 3.5 350 12.5 0.98 16.4 13 15 Grey* 4.0 400 17.4 3.22 53.7 21 25
ROTORS

4.0 400 12.5 1.05 17.5 13 16 4.5 450 17.4 3.38 56.3 22 26
Standard
4.5 450 12.8 1.11 18.6 14 16 5.0 500 17.4 3.53 58.8 23 27
5.0 500 13.1 1.18 19.6 14 16 5.5 550 17.7 3.69 61.5 24 27
5.5 550 13.4 1.24 20.7 14 16 6.0 600 18.0 3.82 63.7 24 27
2.5 250 12.8 0.95 15.9 12 13 6.2 620 18.3 3.88 64.6 23 27
5 3.0 300 13.1 1.04 17.3 12 14 3.0 300 17.4 30.8 51.4 20 24
3.5 350 13.4 1.11 18.5 12 14
18 3.5 350 17.7 3.31 55.2 21 24
White
4.0 400 13.4 1.17 19.6 13 15 Red 4.0 400 18.0 3.52 58.7 22 25
4.5 450 13.7 1.24 20.6 13 15 4.5 450 18.3 3.72 62.0 22 26
5.0 500 14.0 1.29 21.5 13 15 5.0 500 18.9 3.91 65.2 22 25
5.5 550 14.3 1.35 22.6 13 15 5.5 550 19.2 4.11 68.5 22 26
2.5 250 13.4 1.44 24.0 16 19 6.0 600 19.5 4.28 71.4 23 26
7 3.0 300 14.0 1.54 25.6 16 18 6.2 620 19.5 4.35 72.5 23 26
Orange* 3.5 350 14.3 1.61 26.9 16 18 3.5 350 18.0 3.72 62.1 23 27
4.0 400 14.3 1.68 28.0 16 19
20 4.0 400 18.6 3.97 66.2 23 27
4.5 450 14.6 1.75 29.1 16 19 Dk. 4.5 450 18.9 4.20 70.1 24 27
5.0 500 14.9 1.81 30.1 16 19 Brown* 5.0 500 19.2 4.42 73.7 24 28
5.5 550 15.2 1.87 31.1 16 19 5.5 550 19.5 4.66 77.7 25 28
2.5 250 14.0 1.65 27.5 17 19 6.0 600 19.8 4.86 81.0 25 29
8 3.0 300 14.3 1.81 30.1 18 20 6.5 650 20.1 5.05 84.2 25 29
3.5 350 14.9 1.94 32.3 17 20 6.9 690 20.4 5.21 86.8 25 29
Lt. Brown 4.0 400 15.2 2.05 34.2 18 20 3.5 350 18.6 4.56 76.0 26 30
4.5 450 15.2 2.16 36.0 19 22
23 4.0 400 19.2 4.88 81.3 26 31
5.0 500 15.5 2.27 37.8 19 22 Dk. Green 4.5 450 19.5 5.18 86.3 27 31
5.5 550 15.8 2.38 39.6 19 22 5.0 500 19.8 5.47 91.1 28 32
3.0 300 15.2 2.15 35.8 18 21 5.5 550 20.1 5.78 96.3 29 33
10 3.5 350 15.5 2.32 38.6 19 22 6.0 600 20.1 6.04 100.6 30 34
Lt. Green* 4.0 400 15.8 2.48 41.3 20 23 6.5 650 20.4 6.29 104.8 30 35
4.5 450 16.2 2.63 43.9 20 23 6.9 690 20.7 6.50 108.3 30 35
5.0 500 16.2 2.78 46.3 21 25 3.5 350 19.2 4.86 80.9 26 30
5.5 550 16.5 2.94 48.9 22 25
25 4.0 400 19.8 5.23 87.1 27 31
6.0 600 16.8 3.07 51.1 22 25 Dk. Blue* 4.5 450 20.1 5.58 93.1 28 32
3.0 300 15.8 2.38 39.6 19 22 5.0 500 20.4 5.92 98.7 28 33
13 3.5 350 16.2 2.57 42.8 20 23 5.5 550 21.0 6.29 104.9 28 33
Lt. Blue 4.0 400 16.5 2.75 45.7 20 23 6.0 600 21.0 6.60 110.0 30 34
4.5 450 16.5 2.91 48.5 21 25 6.5 650 21.3 6.90 115.1 30 35
5.0 500 16.8 3.04 51.2 22 25 6.9 690 21.6 7.15 119.2 31 35
5.5 550 16.8 3.24 54.0 23 27 3.5 350 18.3 5.31 88.5 32 37
6.0 600 17.1 3.39 56.4 23 27 28 4.0 400 19.2 5.63 93.8 31 35
Black 4.5 450 20.1 5.93 98.8 29 34
5.0 500 20.7 6.21 103.5 29 33
5.5 550 21.3 6.52 108.6 29 33
6.0 600 21.3 6.77 112.8 30 34
6.5 650 21.6 7.01 116.9 30 35
6.9 690 21.6 7.21 120.2 31 36

* 5 standard nozzles included with each sprinkler.

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

32 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

I-25 HIGH-SPEED NOZZLE PERFORMANCE DATA I-25 NOZZLE

Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
2.5 250 11.0 0.81 13.6 14 16 3.0 300 14.6 2.86 47.7 27 31
4 3.0 300 11.3 0.91 15.1 14 16
15 3.5 350 14.9 3.05 50.8 27 32
Yellow 3.5 350 11.6 0.99 16.4 15 17 Grey* 4.0 400 15.2 3.22 53.7 28 32

ROTORS
4.0 400 11.6 1.06 17.6 16 18 4.5 450 15.5 3.38 56.3 28 32
High-Speed
4.5 450 11.6 1.13 18.8 17 19 5.0 500 16.2 3.53 58.8 27 31
5.0 500 11.9 1.19 19.9 17 19 5.5 550 16.5 3.69 61.5 27 31
5.5 550 11.9 1.26 21.1 18 21 6.0 600 16.5 3.82 63.7 28 33
2.5 250 11.3 0.93 15.5 15 17 6.2 620 16.5 3.88 64.6 29 33
5 3.0 300 11.6 1.04 17.3 16 18 3.0 300 14.9 3.08 51.4 28 32
3.5 350 11.9 1.13 18.9 16 18
18 3.5 350 15.2 3.31 55.2 29 33
White
4.0 400 12.2 1.22 20.3 16 19 Red 4.0 400 15.5 3.52 58.7 29 34
4.5 450 12.2 1.30 21.6 17 20 4.5 450 16.2 3.72 62.0 29 33
5.0 500 12.5 1.38 22.9 18 20 5.0 500 16.8 3.91 65.2 28 32
5.5 550 12.5 1.46 24.4 19 22 5.5 550 17.4 4.11 68.5 27 31
2.5 250 11.9 1.32 22.0 19 22 6.0 600 17.4 4.28 71.4 28 33
7 3.0 300 12.2 1.46 24.3 20 23 6.2 620 17.4 4.35 72.5 29 33
Orange* 3.5 350 12.5 1.57 26.2 20 23 3.5 350 15.5 3.72 62.1 31 36
4.0 400 12.8 1.68 27.9 20 24
20 4.0 400 16.2 3.97 66.2 30 35
4.5 450 13.1 1.78 29.6 21 24 Dk. 4.5 450 16.5 4.20 70.1 31 36
5.0 500 13.4 1.87 31.1 21 24 Brown* 5.0 500 17.1 4.42 73.7 30 35
5.5 550 13.4 1.97 32.8 22 25 5.5 550 17.7 4.66 77.7 30 34
2.5 250 12.5 1.54 25.7 20 23 6.0 600 17.7 4.86 81.0 31 36
8 3.0 300 12.8 1.72 28.6 21 24 6.5 650 18.0 5.05 84.2 31 36
Lt. Brown 3.5 350 13.1 1.86 31.0 22 25 6.9 690 18.0 5.21 86.8 32 37
4.0 400 13.4 2.00 33.3 22 26 3.5 350 16.5 4.56 76.0 34 39
4.5 450 13.4 2.13 35.4 24 27
23 4.0 400 17.1 4.88 81.3 33 39
5.0 500 13.7 2.25 37.5 24 28 Dk. Green 4.5 450 17.4 5.18 86.3 34 40
5.5 550 13.7 2.38 39.7 25 29 5.0 500 17.7 5.47 91.1 35 40
3.0 300 13.7 2.15 35.8 23 26 5.5 550 18.3 5.78 96.3 35 40
10 3.5 350 14.0 2.32 38.6 24 27 6.0 600 18.3 6.04 100.6 36 42
Lt. Green* 4.0 400 14.3 2.48 41.3 24 28 6.5 650 18.6 6.29 104.8 36 42
4.5 450 14.6 2.63 43.9 25 28 6.9 690 18.6 6.50 108.3 38 43
5.0 500 14.9 2.78 46.3 25 29 3.5 350 17.1 4.86 80.9 33 38
5.5 550 15.2 2.94 48.9 25 29
25 4.0 400 17.7 5.23 87.1 33 39
6.0 600 15.2 3.07 51.1 26 31 Dk. Blue* 4.5 450 18.3 5.58 93.1 33 39
3.0 300 14.3 2.38 39.6 23 27 5.0 500 18.9 5.92 98.7 33 38
13 3.5 350 14.6 2.57 42.8 24 28 5.5 550 19.5 6.29 104.9 33 38
Lt. Blue 4.0 400 14.9 2.75 45.7 25 28 6.0 600 19.8 6.60 110.0 34 39
4.5 450 15.2 2.91 48.5 25 29 6.5 650 20.1 6.90 115.1 34 39
5.0 500 15.5 3.07 51.2 25 29 6.9 690 20.1 7.15 119.2 35 41
5.5 550 15.5 3.24 54.0 27 31 3.5 350 17.4 5.31 88.5 35 41
6.0 600 15.5 3.39 56.4 28 32 28 4.0 400 17.7 5.63 93.8 36 42
Black 4.5 450 18.0 5.93 98.8 37 42
5.0 500 18.3 6.21 103.5 37 43
5.5 550 18.9 6.52 108.6 36 42
6.0 600 19.5 6.77 112.8 36 41
6.5 650 19.8 7.01 116.9 36 41
6.9 690 20.4 7.21 120.2 35 40

* 5 standard nozzles included with each sprinkler.

Notes:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 33

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 13.1 to 23.2 m

I-40 Flow: 1.63 to 6.84 m3/hr; 27.2 to 114.1 l/min

Inlet: 1" BSP

FEATURES
• Models stainless steel riser: ►► Opposing nozzle 360° model
10 cm to 15 cm ►► Automatic arc return
• Arc setting: 50° to 360° ►► Non-strippable drive
ROTORS

• Factory installed rubber cover ►► Part- and full-circle in one model I-40-04
• Nozzle choices: 12 ►► Colour-coded nozzles Overall height: 20 cm
• Nozzle ranges I-40: #8 to #25 ►► Optional reclaimed water ID Pop-up height: 10 cm
• Nozzle ranges I-40-ON: #15 to #28 Exposed diameter: 5 cm
►► Stainless steel riser Inlet size: 1" BSP
• Through-the-top arc adjustment ►► Drain check valve
• QuickCheck™ arc mechanism (up to 3 m of elevation)
• Water lubricated gear-drive
• Warranty period: 5 years

OPERATING SPECIFICATIONS
• Radius I-40: 13.1 to 21.3 m
• Radius I-40-ON: 15.2 to 23.2 m
• Flow I-40: 1.63 to 6.84 m3/hr; 27.2 to 114.1 l/min
• Flow I-40-ON: 2.75 to 7.76 m3/hr; 45.8 to 129.4 l/min I-40-06
• Recommended pressure range: 2.5 to 7.0 bar; 250 to 700 kPa Overall height: 26 cm
Pop-up height: 15 cm
• Operating pressure range: 2.5 to 7.0 bar; 250 to 700 kPa Exposed diameter: 5 cm
• Precipitation rates: 15 mm/hr approximately Inlet size: 1" BSP
• Nozzle trajectory: 25°

► = Advanced Feature descriptions on page 18

I-40 Reclaimed
Available as a factory
installed option on all models

I-40 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-40-04-SS = 10 cm Pop-up Adjustable arc, stainless B = BSP inlet threads #8 to #25 = Factory
steel riser, check valve and installed nozzle number
I-40-06-SS = 15 cm Pop-up R = Reclaimed water ID
6 nozzles
HS = High speed
HS-R = High speed and reclaimed water ID

I-40-ON – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-40-04-SS-ON = 10 cm Pop-up Full-circle, opposing nozzle, B = BSP inlet threads #15 to #28 = Factory
stainless steel riser, check installed nozzle number
I-40-06-SS-ON = 15 cm Pop-up valve and 6 nozzles R = Reclaimed water ID
ON = Full circle opposing nozzle

ON-R = Full circle opposing nozzles, reclaimed water ID

Examples:
I-40-04-SS - B = 10 cm Pop-up, BSP inlet threads
I-40-04-SS - ON-R - B - 23 = 10 cm Pop-up, full-circle opposing nozzles, reclaimed water ID, #23 nozzle, BSP inlet threads
I-40-06-SS - 15 - B = 15 cm Pop-up, #15 nozzle, BSP inlet threads

34 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

I-40 STANDARD NOZZLE PERFORMANCE DATA I-40 HIGH-SPEED NOZZLE PERFORMANCE DATA I-40 NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
2.5 250 13.1 1.63 27.2 19 22 2.5 250 12.2 1.63 27.2 22 25
8 3.0 300 13.4 1.80 30.0 20 23 8 3.0 300 12.5 1.80 30.0 23 27
(40) 3.5 350 13.7 1.94 32.3 21 24 (40) 3.5 350 12.8 1.94 32.3 24 27

ROTORS
Lt. Brown 4.0 400 14.0 2.06 34.4 21 24 Lt. Brown 4.0 400 12.8 2.06 34.4 25 29
4.5 450 14.0 2.18 36.3 22 26 4.5 450 13.1 2.18 36.3 25 29
5.0 500 14.3 2.29 38.2 22 26 5.0 500 13.4 2.29 38.2 25 29 Standard/
5.5 550 14.6 2.41 40.2 23 26 5.5 550 13.4 2.41 40.2 27 31 High-Speed
3.0 300 14.6 2.20 36.6 21 24 3.0 300 13.4 2.20 36.6 34 28
10 3.5 350 14.9 2.37 39.4 21 24 10 3.5 350 13.7 2.37 39.4 25 29
(41) (41)
4.0 400 15.2 2.52 42.0 22 25 4.0 400 14.0 2.52 42.0 26 30
Lt. Green 4.5 450 15.5 2.67 44.5 22 25 Lt. Green 4.5 450 14.0 2.67 44.5 27 31
5.0 500 15.5 2.81 46.8 23 27 5.0 500 14.3 2.81 46.8 27 32
5.5 550 15.8 2.96 49.3 24 27 5.5 550 14.6 2.96 49.3 28 32
6.0 600 16.2 3.08 51.4 24 27 6.0 600 14.6 3.08 51.4 29 33
3.0 300 14.9 2.36 39.4 21 24 3.0 300 13.7 2.36 39.4 25 29
13 3.5 350 15.2 2.55 42.6 22 25 13 3.5 350 14.0 2.55 42.6 26 30
(42) (42)
4.0 400 15.5 2.73 45.5 23 26 4.0 400 14.3 2.73 45.5 27 31
Lt. Blue 4.5 450 15.5 2.90 48.3 24 28 Lt. Blue 4.5 450 14.3 2.90 48.3 28 33
5.0 500 15.8 3.06 51.0 24 28 5.0 500 14.6 3.06 51.0 29 33
5.5 550 16.2 3.23 53.9 25 29 5.5 550 14.9 3.23 53.9 29 33
6.0 600 16.5 3.38 56.3 25 29 6.0 600 14.9 3.38 56.3 30 35
3.0 300 16.2 2.93 48.8 22 26 3.0 300 15.2 2.93 48.8 25 29
15 3.5 350 16.5 3.19 53.2 24 27 15 3.5 350 15.5 3.19 53.2 26 30
(43) (43)
4.0 400 16.8 3.44 57.3 24 28 4.0 400 15.8 3.44 57.3 27 32
Grey 4.5 450 17.1 3.67 61.2 25 29 Grey 4.5 450 15.8 3.67 61.2 29 34
5.0 500 17.4 3.89 64.9 26 30 5.0 500 16.2 3.89 64.9 30 34
5.5 550 18.0 4.14 68.9 26 30 5.5 550 16.5 4.14 68.9 31 35
6.0 600 18.3 4.34 72.4 26 30 6.0 600 16.5 4.34 72.4 32 39
6.2 620 18.3 4.43 73.8 26 31 6.2 620 16.5 4.43 73.8 33 38
3.5 350 18.6 4.48 74.6 26 30 3.5 350 16.8 4.48 74.6 32 37
23 4.0 400 18.9 4.76 79.4 27 31 23 4.0 400 17.4 4.76 79.4 32 36
(44) (44)
4.5 450 19.2 5.03 83.9 27 32 4.5 450 17.7 5.03 83.9 32 37
Dk. Green 5.0 500 19.5 5.29 88.1 28 32 Dk. Green 5.0 500 17.7 5.29 88.1 34 39
5.5 550 19.8 5.56 92.7 28 33 5.5 550 18.0 5.56 92.7 34 40
6.0 600 20.1 5.79 96.5 29 33 6.0 600 18.3 5.79 96.5 35 40
6.2 620 20.1 5.89 98.1 29 34 6.2 620 18.6 5.89 98.1 34 39
6.5 650 20.1 6.01 100.2 30 34 6.5 650 18.6 6.01 100.2 35 40
6.9 690 20.4 6.19 103.2 30 34 6.9 690 18.6 6.19 103.2 36 41
3.5 350 19.8 4.98 83.0 25 29 3.5 350 17.4 4.98 83.0 33 38
25 4.0 400 20.1 5.33 88.7 26 30 25 4.0 400 18.0 5.33 88.7 33 38
(45) (45)
4.5 450 20.4 5.65 94.2 27 31 4.5 450 18.3 5.65 94.2 34 39
Dk. Blue 5.0 500 20.7 5.96 99.3 28 32 Dk. Blue 5.0 500 18.6 5.96 99.3 34 40
5.5 550 21.0 6.29 104.9 28 33 5.5 550 18.9 6.29 104.9 35 41
6.0 600 21.0 6.57 109.6 30 34 6.0 600 19.2 6.57 109.6 36 41
6.2 620 21.0 6.69 111.5 30 35 6.2 620 19.5 6.69 111.5 35 41
6.5 650 21.3 6.84 114.1 30 35 6.5 650 19.5 6.84 114.1 36 42
6.9 690 21.3 7.07 117.8 31 36 6.9 690 19.5 7.07 117.8 37 43

Note:
All precipitation rates calculated for 180° operation. For the
precipitation rate for a 360° sprinkler, divide by 2.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 35

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

I-40 DUAL OPPOSING NOZZLE PERFORMANCE DATA I-40 NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
3.0 300 15.2 2.75 45.8 12 14
15 3.5 350 15.8 2.91 48.5 12 13
Grey 4.0 400 16.2 3.06 51.0 12 14
ROTORS

4.5 450 16.8 3.20 53.3 11 13

5.0 500 17.1 3.32 55.4 11 13
5.5 550 17.4 3.46 57.7 11 13
Opposing
6.0 600 17.7 3.58 59.6 11 13
6.2 620 17.7 3.62 60.4 12 13 Front Back
3.0 300 17.4 2.90 48.3 10 11
18 3.5 350 17.7 3.15 52.5 10 12
Red 4.0 400 18.0 3.38 56.4 10 12
4.5 450 18.0 3.61 60.1 11 13
5.0 500 18.3 3.82 63.7 11 13
5.5 550 18.9 4.05 67.5 11 13
6.0 600 19.2 4.25 70.8 12 13
6.2 620 19.2 4.33 72.1 12 14
6.5 650 19.5 4.43 73.9 12 13
3.5 350 18.3 3.98 66.2 12 14
20 4.0 400 18.9 4.26 71.1 12 14
Dk. Brown 4.5 450 19.2 4.54 75.6 12 14
5.0 500 19.5 4.80 80.0 13 15
5.5 550 20.1 5.08 84.7 13 15
6.0 600 19.8 5.32 88.7 14 16
6.2 620 19.8 5.42 90.4 14 16
6.5 650 20.1 5.55 92.5 14 16
6.9 690 20.1 5.74 95.7 14 16
3.5 350 18.9 4.23 70.6 12 14
23 4.0 400 19.5 4.55 75.8 12 14
Dk. Green 4.5 450 19.8 4.85 80.8 12 14
5.0 500 20.1 5.14 85.6 13 15
5.5 550 20.4 5.45 90.8 13 15
6.0 600 20.7 5.71 95.1 13 15
6.2 620 20.7 5.82 97.0 14 16
6.5 650 20.7 5.96 99.4 14 16
6.9 690 21.0 6.17 102.9 14 16 I-40 Opposing Nozzle 360° Model
3.5 350 19.5 4.60 76.7 12 14
25 4.0 400 20.1 4.92 82.1 12 14
Dk. Blue 4.5 450 20.4 5.23 87.2 13 14
5.0 500 20.7 5.52 92.0 13 15
5.5 550 21.0 5.84 97.3 13 15
6.0 600 21.3 6.10 101.7 13 15
6.2 620 21.3 6.22 103.6 14 16
6.5 650 21.3 6.36 106.0 14 16
6.9 690 21.6 6.57 109.5 14 16
3.5 350 19.8 5.73 95.5 15 17
28 4.0 400 20.4 6.07 101.1 15 17
Black 4.5 450 21.0 6.38 106.4 14 17
5.0 500 21.3 6.68 111.3 15 17
5.5 550 21.9 7.00 116.7 15 17
6.0 600 22.3 7.27 121.1 15 17
6.2 620 22.3 7.38 122.9 15 17
6.5 650 22.6 7.52 125.3 15 17
6.9 690 23.2 7.73 128.8 14 17

Note:
Precipitation rates for the ON-Opposing Nozzles models are
calculated at 360°. For the precipitation rate for a
360° sprinkler, divide by 2.

36 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 22.3 to 31.4 m

I-90 Flow: 6.7 to 19.04 m3/hr; 111.7 to 317.2 l/min

Inlet: 1½" BSP

FEATURES
• Model: 8 cm • Water lubricated gear-drive
• Arc setting: 40° to 360° • Standard factory installed
• Dual trajectory nozzle choices: nozzle: #53

ROTORS
• Factory installed rubber logo cap I-90
-- 8 standard trajectory (22.5°) Overall height:
-- 8 low angle trajectory (15°) • Warranty period: 5 years ADV/36V: 28 cm
• Nozzle range: #25 to #73 ►► Opposing nozzle 360° model Pop-up height: 8 cm
►► Dual trajectory colour-coded nozzles Exposed diameter: 9 cm
• Exclusive Pressure Port™ Inlet size: 1½" BSP
nozzle technology ►► Optional reclaimed water ID
• Through-the-top arc adjustment ►► Drain check valve
• QuickCheck™ arc mechanism (up to 2 m of elevation)

OPERATING SPECIFICATIONS
• Radius: • Recommended pressure range:
-- I90-ADV: 20.1 m to 29.6 m 5.5 to 8.0 bar; 550 to 800 kPa
-- 190-36V: 22.3 m to 31.4 m • Operating pressure range:
5.0 to 8.0 bar; 500 to 800 kPa
• Flow:
• Precipitation rates: 19 mm/hr
-- I90-ADV: 6.70 to 19.04 m3/hr;
approximately (360°)
111.7 to 317.2 l/min
-- I90-36V: 6.93 to 18.92 m3/hr;
115.5 to 315.3 l/min

USER-INSTALLED OPTIONS Turf cup kit

P/N 467955
• Turf Cup Kit
-- I-90 all: P/N 467955
• Rubber Cover Kit
-- I-90-ADV: P/N 234200 (all)
-- I-90-36V: P/N 234200 (0711 date code and after)
-- I-90-36V: P/N 234201 (0611 date code and prior only)
• Low-Angle Nozzles: #25 to #73

► = Advanced Feature descriptions on page 18 Rubber cover kits

I90-ADV: P/N 234200
I90-36V: P/N 234201

I-90 Reclaimed
Available as a factory
installed option on all models

I-90 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Standard Features 3 Feature Options 4 Nozzle Options

I-90 = 8 cm Pop-up Plastic riser, check valve, ADV = Adjustable arc #25 to #73 = Factory installed nozzle
and 8 standard trajectory number
nozzles ARV = Adjustable arc and reclaimed water ID
36V = Full-circle, opposing nozzles
3RV = Full-circle, opposing nozzles and reclaimed water ID
B = BSP inlet threads

Examples:
I-90 - ADV - B = 8 cm Pop-up, adjustable arc, with BSP inlet threads
I-90 - 36V - B - 43 = 8 cm Pop-up, full-circle, opposing nozzles, with BSP inlet threads, and #43 nozzle
I-90 - 3RV - B - 63 = 8 cm Pop-up, full-circle, opposing nozzles, reclaimed water ID, with BSP inlet threads, and #63 nozzle

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 37

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

I-90-ADV NOZZLE PERFORMANCE DATA I-90-36V NOZZLE PERFORMANCE DATA I-90 NOZZLE

Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
5.5 550 20.1 6.70 111.7 33.1 38.2 5.5 550 22.3 6.93 115.5 14.0 16.2
25 6.0 600 20.4 7.16 119.2 34.3 39.6 25 6.0 600 22.9 7.36 122.6 14.1 16.3
Lt. Blue 7.0 700 20.7 7.54 125.7 35.1 40.5 Lt. Blue 7.0 700 23.2 7.79 129.8 14.5 16.8
ADV & 36V
ROTORS

7.5 750 21.0 8.09 134.8 36.6 42.2 7.5 750 23.8 8.29 138.2 14.7 16.9
5.5 550 20.7 8.22 137.0 38.3 44.2 5.5 550 23.5 8.25 137.4 15.0 17.3
33 6.0 600 21.0 8.68 144.6 39.2 45.3 33 6.0 600 23.8 8.72 145.4 15.4 17.8
Grey 7.0 700 21.3 9.18 152.9 40.3 46.6 Grey 7.0 700 24.4 9.22 153.7 15.5 17.9
7.5 750 21.6 9.68 161.3 41.3 47.7 7.5 750 24.7 9.70 161.6 15.9 18.4
5.5 550 21.9 9.22 153.7 38.3 44.2 5.5 550 24.4 9.22 153.7 15.5 17.9
38 6.0 600 22.3 9.77 162.8 39.5 45.6 38 6.0 600 25.0 9.75 162.4 15.6 18.0 Low Angle ADV & 36V**
Red 7.0 700 22.9 10.31 171.9 39.5 45.6 Red 7.0 700 25.3 10.29 171.5 16.1 18.6
7.5 750 23.2 10.81 180.2 40.3 46.5 7.5 750 25.9 10.84 180.6 16.1 18.6 ** For low angle nozzle
5.5 550 22.6 10.47 174.5 41.2 47.5 5.5 550 25.3 10.49 174.9 16.4 18.9 performance, reduce
43 6.0 600 22.6 11.02 183.6 43.3 50.0 43 6.0 600 25.6 11.04 184.0 16.8 19.4
radius by 15%.

Dk. Brown 7.0 700 22.9 11.52 191.9 44.1 50.9 Dk. Brown 7.0 700 25.9 11.56 192.7 17.2 19.9
7.5 750 23.5 12.13 202.1 44.0 50.9 7.5 750 26.2 12.13 202.1 17.7 20.4
5.5 550 23.5 11.40 190.0 41.4 47.8 5.5 550 26.2 11.27 187.8 16.4 18.9
48 6.0 600 24.1 11.95 199.1 41.2 47.6 48 6.0 600 27.1 11.93 198.7 16.2 18.7
Dk. Green 7.0 700 24.7 12.52 208.6 41.1 47.4 Dk. Green 7.0 700 27.4 12.45 207.4 16.5 19.1
7.5 750 25.0 13.06 217.7 41.8 48.3 7.5 750 27.7 13.02 216.9 16.9 19.5
5.5 550 24.7 12.47 207.8 40.9 47.2 5.5 550 27.1 12.31 205.2 16.7 19.3
53 6.0 600 25.6 12.99 216.5 39.6 45.8 53 6.0 600 27.4 12.88 214.6 17.1 19.8
Dk. Blue 7.0 700 26.2 13.52 225.2 39.3 45.4 Dk. Blue* 7.0 700 28.0 13.45 224.1 17.1 19.7
7.5 750 26.5 14.11 235.1 40.1 46.3 7.5 750 28.3 14.02 233.6 17.4 20.1
8.0 800 26.8 14.63 243.8 40.7 47.0 8.0 800 28.7 14.58 243.0 17.8 20.5
5.5 550 26.2 14.15 235.8 41.2 47.6 5.5 550 28.0 14.36 239.2 18.3 21.1
63 6.0 600 26.8 14.88 247.9 41.4 47.8 63 6.0 600 28.7 14.97 249.5 18.2 21.1
Black 7.0 700 27.4 15.67 261.2 41.7 48.1 Black 7.0 700 29.3 15.76 262.7 18.4 21.3
7.5 750 27.7 16.33 272.2 42.5 49.0 7.5 750 29.6 16.36 272.5 18.7 21.6
8.0 800 28.0 16.97 282.8 43.2 49.8 8.0 800 29.9 17.01 283.5 19.1 22.0
5.5 550 27.1 16.51 275.2 44.9 51.8 5.5 550 29.3 16.38 272.9 19.1 22.1
73 6.0 600 27.7 17.13 285.4 44.5 51.4 73 6.0 600 29.9 17.04 283.9 19.1 22.0
Orange 7.0 700 28.3 17.74 295.6 44.2 51.0 Orange 7.0 700 30.2 17.67 294.5 19.4 22.4
7.5 750 29.0 18.38 306.2 43.8 50.6 7.5 750 31.1 18.29 304.7 18.9 21.8
8.0 800 29.6 19.04 317.2 43.5 50.3 8.0 800 31.4 18.92 315.3 19.2 22.2

* Factory installed nozzle

Notes:
Precipitation rates for ADV models are calculated for 180°
operation. Precipitation rates for 36V models are calculated for
360° operation. All triangular rates are equilateral.
Complies to ASAE standard.

I-90

38 Visit hunterindustries.com
 8 cm pop-up, jar top cap, adjustable arc, plastic riser,
ST-90-B-83
BSP inlet threads, and 2 nozzles
PGJ SRM PGP®
8 cm pop-up,
PGP® ULTRA I-20
top service, I-25 arc, I-40
adjustable I-90
plastic riser, ST SYSTEM
STG-900-83
ACME inlet threads, and 2 nozzles

Radius: 31.4 to 36.6 m

STK-1 / STK-2 Flow: 16.9 to 20.9 m3/hr; 282.0 to 348 l/min

Inlet: 1½" BSP (ST-90), 1½" ACME (STG-900)
ST SYSTEM FOR COOLING AND
CLEANING SYNTHETIC TURF
ST ROTOR
FEATURES
Model Description
• Standard installed nozzle: #83
13 cm pop-up, top service, adjustable arc, stainless steel riser,
• ST-1600-B
Arc setting: 40° to 360°
BSP inlet threads, and 6 nozzles
• QuickCheck™ arc mechanism

ROTORS
High-speed ST-1600B, up to 65 seconds for 180° at
ST-1600-HS-B ST-90*
• Through-the-top arc 8 bar; 800 kPa
adjustment Overall height: 29 cm
• ST-1600-BR
Water lubricated gear-drive
Riser mount, adjustable arc, BSP inlet threads and 6 nozzles Pop-up height: 8 cm
• Factory installed rubber logo cap
High-speed ST-1600BR, up to 65 seconds for 180° at Diameter: 14 cm
ST-1600-HS-BR Inlet size: 1½" (40 mm) BSP
8 bar; 800 kPa
• Nozzle trajectory: 22.5°
* not for use with the ST Vault
• Warranty period: 5 years

OPERATING SPECIFICATIONS
• Radius: 31.4 m to 36.6 m
• Flow: 16.9 to 20.9 m3/hr; 282 to 348 l/min
STK-5V / STK-6V COMPONENTS
• Operating pressure range: 6.9 to 8.3 bar; 690 to 830 kPa
• Kit Description rate: 35 mm/hr approximately
Precipitation STK-5V STK-6V
For specification ease and to ensure the correct product is installed, ST-1600 Block System ST-1600 VAH System
the ST System is available in kit configurations below. (remotely located valve) (valve adjacent to head)
USER INSTALLED OPTIONS
ST Rotor: Synthetic turf rotor ST-1600B ST-1600B
• Rubber Cover Kit ST-90: P/N 234200
ST IBS: Infill barrier system rubber cover kit ST-IBS1600 ST-IBS1600
• Rubber Cover Kit STG-900: P/N 473900
ST BKT: Rotor vault hanger & elevation adjustment bracket ST-BKT1600 ST-BKT1600
STG-900*
ST Vault: Vault with 4-piece polymer-concrete cover set ST-243636B ST-243636B Overall height: 36 cm
Pop-up height: 8 cm
ST Manifold: 3" (80 mm) Fittings, isolation valve and drain valve ST-BVF30K ST-BVF30K
Diameter: 20 cm
ST Valve:
ST ROTOR 3" (80 mm) valve with remote on-off-auto selector — STV30KV Inlet size: 1½" (40 mm) ACME

ST Support: AdjustableDescription
Model manifold support (2 required) ST-SPTK ST-SPTK * for use with the
ST173026B Vault
ST Inlet Hose: Flexible stainless steeljar
8 cm pop-up, braided alignment
top cap, hose
adjustable arc, plastic riser, ST-H30K ST-H30K
ST-90-B-83
BSP inlet threads, and 2 nozzles
BSP Inlet Adapter: 3" (80 mm) NPT male x BSP female adpater 855000 855000
8 cm pop-up, top service, adjustable arc, plastic riser,
STG-900-83
BSP Drain Valve Adapter: 1" (25 mm) NPT male 855100 855100
ACME inlet threads, andx2BSP male adapter (2 req'd)
nozzles
Quick Coupler Valve: 1" (25 mm) BSP inlet 1¼" (32 mm) outlet for key HQ5RC-BSP HQ5RC-BSP

KIT CONFIGURATIONS

STK-1 / STK-2 COMPONENTS

ST ROTOR
Kit Descriptions STK-1 STK-2
For specification ease and
Model to ensure the correct product is installed,
Description STG-900 Block System STG-900 VAH System
the ST System is available in kit configurations below. (remotely located valve) (valve adjacent to head)
13 cm pop-up, top service, adjustable arc, stainless steel riser,
ST-1600-B
ST Rotor: Synthetic TurfBSP inlet
Rotor threads,
without and 6cover
rubber nozzles
kit STG-900 STG-900
High-speed ST-1600B, up to 65 seconds for 180° at
ST Vault: Vault with 3-piece polymer-concrete cover
ST-1600-HS-B ST-173026B ST-173026B
8 bar; 800 kPa
ST Swing Joint: “VA” 2"Riser
ST-1600-BR (50mm) PVCadjustable
mount, swing jointarc,
with 7 pivot
BSP inlet points ST-2008VA
threads and 6 nozzles ST-2008VA
ST Valve & Fitting Kit: ICV-151 valve,ST-1600BR,
High-speed high pressure
uprated
to 65ball valvefor
seconds & fi180°
ttingat
kit — ST-VBVFK
ST-1600-HS-BR
ST Adapter Elbow Fitting*8 bar; 800 kPa 239800 239800
ST Rotor Adapter Fitting** 239300 —
Rubber Cover Kit: STG-900 Rubber Cover Kit 473900 473900
Quick-Coupler Valve: 1" (25mm) inlet with 1¼" (32 mm) outlet for key HQ5RC-BSP HQ5RC-BSP
BSP Inlet Adapter: Converts swing joint to 2" (50 mm) male BSP threads 241400 241400
STK-5V / STK-6V COMPONENTS
Notes:
*ST Adapter Elbow Fitting connects ST-2008VA swing joint to rotor adapter fitting (STK-1B) also connects ST-VBVFK to STG-900 rotor (STK-2B)
Kit Description STK-5V STK-6V
**ST Rotor Adapter Fitting connects 239800 adapter elbow fitting to STG-900 rotor’s ACME inlet (STK-1B)
For specification ease and to ensure the correct product is installed, ST-1600 Block System ST-1600 VAH System
the ST System is available in kit configurations below. (remotely located valve) (valve adjacent to head)

ST Rotor: Synthetic turf rotor ST-1600B ST-1600B

ST IBS: Infill barrier system rubber cover kit ST-IBS1600 ST-IBS1600
Visit hunterindustries.com
ST BKT: Rotor vault hanger & elevation adjustment bracket
RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation®
ST-BKT1600 ST-BKT1600
39
 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

ST-90 / STG-900 NOZZLE PERFORMANCE DATA ST SWING JOINTS

Multi-axis 22 bar; 2,200 kPa rated vertical alignment PVC swing joints
p mm/hr Nozzle Pressure Radius Flow Precip mm/hr
with seven O-Ring sealed pivot points allow the rotor to be perfectly
bar kPa m m3/hr l/min placed within the ST Vault’s cover set opening.
47.8 7.0 700 31.4 16.9 282 34.3 39.6
45.9
73 7.5 750 33.2 17.5 291 31.7 36.6
45.1 Orange 8.0 800 35.1 18.1 301 29.4 34.0 ST2008VA: 2" (50 mm) for ST-90, STG-900
ROTORS

43.9 7.0 700 34.1 19.1 319 32.8 37.9

42.9
83 7.5 750 35.4 20.0 333 32.0 37.0 Inlet: 2" (50 mm) Slip*
48.6 Tan 8.0 800 36.6 20.9 348 31.2 36.1 Outlet: 1½" ACME
45.8 * Use P/N 241400 adapter to male BSP threads
45.2 Notes:
All precipitation rates calculated for 180° operation.
45.2
For precipitation rate of a 360° sprinkler, divide by 2.
43.5
61.7 Requires minimum 7.0 bar; 700 kPa dynamic pressure supplied
55.5 to swing joint inlet.
50.1
51.6
52.9
INSTALLATION DETAILS
69.4 ST VALVE SETS
64.5
STK-1 STK-2 Heavy-duty control valves configured to complement
56.9 the ST Rotors and ST Vaults.
53.9
55.3
77.4 STVBVFK: for STG-900 in STK-2 Kit
72.2
64.1 Valve: 1½" (40 mm) NPT ICV
62.2 Ball Valve: 22 bar (2,200 kPa) rating
63.3 Inlet: 1½" (40 mm) ACME
82.9 Outlet: 1½" (40 mm) ACME
79.5 Low Pressure Loss Design: 0.7 bar; 70 kPa
ON FIELD SIDE ON FIELD SIDE at 22.7 m3/hr; 378 l/min from swing joint inlet through to rotor
70.4
Includes: 1½" (40 mm) connection fittings
67.7
67.8

ST VAULTS
Heavy-duty tapered fiberglass and polymer-concrete construction with
pre-cast holes for rotor and quick coupler valve.
VIEW FROM ON FIELD SIDE VIEW FROM ON FIELD SIDE

ST173026B for STG-900 includes 51 mm thick 3-piece

PC cover set
ST Rotor

Main Cover: 43 cm x 76 cm
Overall Height: 66 cm ①
Body Weight: 47 kg
Total Weight: 73 kg
Base Pad: 68 cm x 104 cm
Quick Access Ports: 1

All ST Vaults include convenient quick access ports.

Quick-couplers provide a convenient source of
water for washing down spills and water-soluble
paint. Integrated in-vault design eliminates the
need for additional quick-coupler enclosures.
① Quick-Coupler

40 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

Radius: 32.5 to 50.3 m

STK-5V / STK-6V Flow: 21.8 to 74.2 m3/hr; 364 to 1,237 l/min

Inlet: 2" BSP
ST SYSTEM FOR COOLING AND
CLEANING SYNTHETIC TURF

FEATURES
• Nozzle choices: 6
• Standard nozzle: #20
• Nozzle range: #16 to #26

ROTORS
• Nozzle trajectory: 22.5° ST-1600B
• Gear-drive: Isolated, grease lubricated gear-drive Overall height: 57 cm
• Factory installed rubber logo cap (ST-1600B) Pop-up height: 13 cm
Diameter: 36 cm
• Arc Adjustment: Moveable stops (left and right) arc adjustment Inlet size: 2" (50 mm) BSP*
• Arc setting: 40° to non-reversing 360°
* Use P/N 241400 adapter
• Ratcheting nozzle turret to 2" (50 mm) pipe
• ST ROTOR rubber infill barrier on riser
Telescoping
• ST
Adjustable
ROTOR speed ofDescription
Model rotation: 0 to 65 seconds (180° at 8 bar; 800 kPa)
• Warranty period: 5 8year component
cm pop-up, jar toppart
cap, adjustable arc, plastic riser,
Model
ST-90-B-83 Description
• Internal construction: BSPBrass,
inlet threads,
stainless and 2 nozzles
steel and ball-bearings
88 cm
cm pop-up,
pop-up, jar
toptop cap, adjustable
service, adjustablearc,
arc,plastic
plasticriser,
riser,
• ST-90-B-83
Optional
STG-900-83 Infill Barrier System (ST-1600B)
BSP inlet threads, and 2 nozzles
ACME inlet threads, and 2 nozzles
8 cm pop-up, top service, adjustable arc, plastic riser,
STG-900-83
OPERATING SPECIFICATIONS
ACME inlet threads, and 2 nozzles

• Radius: 32.5 to 50.3 m

• Flow: 21.8 to 74.2 m3/hr; 364 to 1,237 l/min
• Operating pressure range: 4.0 to 8.0 bar; 400 to 800 kPa
• Precipitation rate: 60 mm/hr approximately
ST ROTOR
Model
ST ROTOR Description ST-1600BR
(Riser Mounted Model)
13 cm pop-up, top service, adjustable arc, stainless steel riser,
Model
ST-1600-B Description Overall height: 22 cm
BSP inlet threads, and 6 nozzles
Diameter: 21 cm
13 cm pop-up,
High-speed top service,
ST-1600B, adjustable
up to arc,for
65 seconds stainless
180° atsteel riser,
ST-1600-B
ST-1600-HS-B Inlet size: 2" (50 mm) BSP*
BSP inlet
8 bar; 800threads,
kPa and 6 nozzles
High-speed ST-1600B, up to 65 seconds for 180° at * Use P/N 241400 adapter
ST-1600-BR
ST-1600-HS-B Riser mount, adjustable arc, BSP inlet threads and 6 nozzles to 2" (50 mm) pipe
8 bar; 800 kPa
High-speed ST-1600BR, up to 65 seconds for 180° at
ST-1600-HS-BR
ST-1600-BR Riser mount, adjustable arc, BSP inlet threads and 6 nozzles
8 bar; 800 kPa
High-speed ST-1600BR, up to 65 seconds for 180° at
ST-1600-HS-BR
8 bar; 800 kPa

KIT CONFIGURATIONS

STK-5V / STK-6V COMPONENTS

Kit Description
STK-5V / STK-6V COMPONENTS STK-5V STK-6V
For specification ease and to ensure the correct product is installed, ST-1600 Block System ST-1600 VAH System
Kit
theDescription
ST System is available in kit configurations below. STK-5V
(remotely located valve) STK-6V
(valve adjacent to head)
For specification ease and to ensure the correct product is installed, ST-1600 Block System ST-1600 VAH System
ST Rotor:
the Synthetic
ST System turf rotor
is available in kit configurations below. ST-1600Blocated valve)
(remotely ST-1600B
(valve adjacent to head)
ST Rotor:
ST IBS: Infi ll barrier system
Synthetic rubber cover kit
turf rotor ST-IBS1600
ST-1600B ST-IBS1600
ST-1600B
ST IBS:
ST BKT:Infi
Rotor vaultsystem
ll barrier hangerrubber
& elevation
coveradjustment
kit bracket ST-BKT1600
ST-IBS1600 ST-BKT1600
ST-IBS1600
ST BKT:
ST Vault:Rotor
Vaultvault
with hanger
4-piece&polymer-concrete coverbracket
elevation adjustment set ST-243636B
ST-BKT1600 ST-243636B
ST-BKT1600
ST Vault:
ST Manifold: 3"with
Vault (80 4-piece
mm) Fittings, isolation valve
polymer-concrete andset
cover drain valve ST-BVF30K
ST-243636B ST-BVF30K
ST-243636B
ST Manifold:
ST Valve: 3" (80 mm)
3" (80 valve
mm) with remote
Fittings, on-off
isolation -auto
valve and selector
drain valve —
ST-BVF30K STV30KV
ST-BVF30K
ST Valve:
ST Support: Adjustable
3" (80 manifold
mm) valve support
with remote (2 required)
on-off -auto selector ST-SPTK
— ST-SPTK
STV30KV
ST Support:
ST Inlet Hose: Flexible stainless
Adjustable manifoldsteel braided
support alignment hose
(2 required) ST-H30K
ST-SPTK ST-H30K
ST-SPTK
BSP
ST Inlet
Inlet Adapter:
Hose: 3" (80
Flexible mm) NPT
stainless steelmale x BSP
braided female adpater
alignment hose 855000
ST-H30K 855000
ST-H30K
BSP Inlet
BSP DrainAdapter:
Valve Adapter: 1" (25NPT
3" (80 mm) mm) NPTxmale
male x BSP male
BSP female adapter (2 req'd)
adpater 855100
855000 855100
855000
Quick
BSP Coupler
Drain Valve:
Valve 1" (25
Adapter: 1" mm) BSPNPT
(25 mm) inletmale
1¼" (32 mm)
x BSP outlet
male for key
adapter (2 req'd) HQ5RC-BSP
855100 HQ5RC-BSP
855100
Quick Coupler Valve: 1" (25 mm) BSP inlet 1¼" (32 mm) outlet for key HQ5RC-BSP HQ5RC-BSP

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 41

 PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

ST Infill Barrier System ST H-Block Manifold Supports

ST-IBS1600 ST-SPTK
The unique IBS rubber cover kit includes vertical Adjustable support stands include a large
rubber barriers to retain infill material creating footprint base made from recycled tire rubber
a safe transition where the rotor pops up. and a 50 mm vertically adjustable support rail
The IBS can also be trimmed to create a flat (two required under manifold).
exposed surface area.
ROTORS

ST Adjustable Hanger Bracket

ST-BKT1600
This bracket supports the rotor within the vault
and provides vertical elevation adjustments
allowing for a perfect surface transition.

ST Manifold and Isolation Valve ST Flexible Stainless Inlet Hose

ST-BVF30K ST-H30K
Rated to 35 bar; 350 kPa working pressure, 3" (80 mm) ultra-flexible stainless steel
this 3" (80 mm) galvanized ductile iron assembly corrugated hose with stainless steel support
includes Victaulic™ type grooved connections, braiding. Provides for minor offset
a butterfly isolation valve, a point of connection and alignment of sub-mainline to the
for the quick coupler, and a 1" (25 mm) brass ST Manifold's inlet connection.
drain valve.

ST Low-Loss, Slow-Opening Valve

ST-V30KV: Heavy-duty control valves for STK-6V.

Valve: 3" (80 mm) Grooved Vic Type
Opening Speed: Slow
Pressure Loss: Ultra Low (0.15 bar; 15 kPa at 65.0 m3/hr; 1,082 l/min)
Manual Control: Remote On-Off-Auto Selector and Solenoid (not shown)

ST Rotors have many uses

While ST Rotors are specifically designed for cleaning and cooling synthetic turf sports fields, they are also great for other applications such
as pastures, horse arenas, dust control and even natural turf areas.

INSIDE THE ST SYSTEM FROM THE TOP SEAMLESS INTEGRATION

 pen access to all components for ease

O Smooth and safe surface area with  lends in perfectly with the surrounding
B
of ongoing maintenance quick-access ports synthetic surface

42 Visit hunterindustries.com
PGJ SRM PGP® PGP® ULTRA I-20 I-25 I-40 I-90 ST SYSTEM

ST VAULTS INSTALLATION DETAILS

Heavy-duty tapered fiberglass and polymer-concrete construction with
pre-cast holes for rotor, quick coupler valve, and two quick access ports. STK-5V STK-6V

Quick-couplers provide a convenient source of water for washing down

spills and water-soluble paint. Integrated in-vault design eliminates the
need for additional quick-coupler enclosures.

ROTORS
The ST-V30KV valve kit includes a remotely located On-Off-Auto selector
and solenoid manifold assembly. These convenient features bring valve
manual control functions and solenoid splice connections closer to the
surface for easy access.
ON FIELD SIDE ON FIELD SIDE

ST-243636B: includes 76 mm thick 4-piece PC cover set

Main Cover: 61 cm x 91 cm
Overall Height: 91 cm
Body Weight: 70 kg
Total Weight: 138 kg
Base Pad: 106 cm x 122 cm
Quick Access Ports: 2

① Quick-Coupler ② On-Off-Auto VIEW FROM ON FIELD SIDE VIEW FROM ON FIELD SIDE
Selector

①
ST-1600 NOZZLE PERFORMANCE DATA ST-90 /

Nozzle Pressure Radius Flow Precip mm/hr Nozzle

bar kPa m m3/hr l/min
4.0 400 32.5 21.8 364 41.4 47.8
② 16 5.0 500 35.0 24.4 406 39.8 45.9
73
Black 6.0 600 37.0 26.8 446 39.1 45.1 Orange
7.0 700 39.0 28.9 482 38.0 43.9
8.0 800 41.0 31.2 520 37.1 42.9
83
4.0 400 34.0 24.3 405 42.0 48.6 Tan
18 5.0 500 37.0 27.1 452 39.6 45.8
Notes:
Black 6.0 600 39.0 29.8 496 39.1 45.2
All precip
7.0 700 40.5 32.1 535 39.1 45.2
For prec
8.0 800 43.0 34.8 580 37.6 43.5
4.0 400 35.0 32.7 545 53.4 61.7
20 5.0 500 39.0 36.5 609 48.1 55.5
Requires
to swing
Black 6.0 600 43.0 40.1 668 43.4 50.1
7.0 700 44.0 43.3 721 44.7 51.6
ST-1600 Rotor in Action
8.0 800 45.0 46.4 773 45.8 52.9
4.0 400 36.0 38.9 649 60.1 69.4
22 5.0 500 39.5 43.6 726 55.8 64.5
Black 6.0 600 44.0 47.7 795 49.3 56.9
7.0 700 47.0 51.5 859 46.7 53.9
8.0 800 48.0 55.2 920 47.9 55.3
4.0 400 37.0 45.9 765 67.1 77.4
24 5.0 500 40.5 51.3 855 62.6 72.2
Black 6.0 600 45.0 56.2 937 55.5 64.1
7.0 700 47.5 60.7 1012 53.8 62.2
8.0 800 48.7 65.0 1084 54.9 63.3
4.0 400 38.4 53.0 883 71.8 82.9
26 5.0 500 41.4 59.2 986 68.8 79.5
Black 6.0 600 46.0 64.6 1077 61.0 70.4
7.0 700 48.7 69.7 1162 58.6 67.7
8.0 800 50.3 74.2 1237 58.7 67.8

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 43

 SECTION 02:
MP ROTATOR
®
MP ROTATOR

44
ADVANCED
FEATURES

MP ROTATOR
AUTOMATIC MATCHED PRECIPITATION

The MP Rotator® has the unique ability to control the amount of water
flowing through the nozzle at various arc and radius settings, resulting
in matched precipitation regardless of the nozzle setting.

DOUBLE-POP

The MP Rotator’s nozzle pops up from its protected position only

after the riser is fully extended, providing superior defense against
dirt and debris.

DISTRIBUTION UNIFORMITY

The various streams of the MP Rotator allow it to target all areas of

the landscape evenly, yielding superior uniformity over traditional
spray nozzles. Each stream targets specific areas to achieve higher
efficiency and even coverage.

LOW PRECIPITATION RATE

Since the vast majority of soils have an infiltration rate of less than
25 mm/hr, irrigating at a low precipitation rate is essential
to achieve efficiency.

The standard MP Rotator line applies water at 10 mm/hr, while

the SR Series has a precipitation rate of 20 mm/hr. Either choice
will avoid runoff, saving water and preventing erosion.

SHORT RADIUS (SR) SERIES

Achieve efficient irrigation in narrow spaces with the SR Series.

MP800SR allows for radius adjustment down to 1.8 m, providing
opportunity for overhead irrigation in smaller spaces than
ever before possible.

45
 ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

ECO ROTATOR Radius: 2.5 to 9.1 m

FEATURES
• Model: 10 cm
• Adjustable arc and radius offer precise settings
• Drain check valve (up to 2 m of elevation)
• Two-piece ratchet Eco Rotator
Overall height: 19 cm
MP ROTATOR

• Warranty period: 2 years Exposed diameter: 3 cm

• Nozzle choices: Inlet size: ½"
MP1000-90, MP2000-90
MP3000-90, MP1000-360
MP2000-360, MP3000-360
►► Automatic matched precipitation
►► Double-pop
►► Distribution uniformity
►► Low precipitation rate

OPERATING SPECIFICATIONS
• Flow rate: 0.04 to 0.96 m3/hr; 0.61 to 16.07 l/min
• Radius: 2.5 to 9.1 m
• Recommended pressure range: 1.7 to 3.8 bar; 170 to 380 kPa
• Precipitation rates: 10 mm/hr approximately

USER INSTALLED OPTIONS

• Drain check valve (up to 2 m of elevation; P/N 462237)
► = Advanced Feature descriptions on page 45

ECO ROTATOR
Model Description
ECO-04 - 1090 10 cm pop-up, MP1000 2.5 to 4.5 m radius, adjustable from 90° to 210°
ECO-04 - 10360 10 cm pop-up, MP1000 2.5 to 4.5 m radius, 360°
ECO-04 - 2090 10 cm pop-up, MP2000 4.0 to 6.4 m radius, adjustable from 90° to 210°
ECO-04 - 20360 10 cm pop-up, MP2000 4.0 to 6.4 m radius, 360°
ECO-04 - 3090 10 cm pop-up, MP3000 6.7 to 9.1 m radius, adjustable from 90° to 210°
ECO-04 - 30360 10 cm pop-up, MP3000 6.7 to 9.1 m radius, 360°

46 Visit hunterindustries.com
ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

ECO ROTATOR PERFORMANCE DATA

ECO-04 MP1000 ECO-04 MP2000 ECO-04 MP3000

Radius: 2.5 to 4.5 m Radius: 4.0 to 6.4 m Radius: 6.7 to 9.1 m
Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle
Maroon: 90° to 210° Black: 90° to 210° Blue: 90° to 210°
Olive: 360° Red: 360° Grey: 360°

Arc Pressure Radius Flow Flow Precip mm/hr Radius Flow Flow Precip mm/hr Radius Flow Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min m m3/hr l/min

MP ROTATOR
1.7 170 -- -- -- -- -- 5.2 0.07 1.18 11 12 7.6 0.16 2.63 11 13
90° 2.0 200 3.7 0.04 0.61 11 12 5.5 0.07 1.23 10 11 8.2 0.17 2.77 10 11
2.5 250 4.0 0.04 0.68 10 12 5.8 0.09 1.43 10 12 8.5 0.19 3.08 10 12
2.8 280 4.1 0.04 0.70 10 11 6.1 0.09 1.52 10 11 9.1 0.20 3.25 9 11
3.0 300 4.3 0.04 0.73 10 11 6.4 0.09 1.57 9 10 9.1 0.20 3.38 10 11
3.5 350 4.4 0.05 0.78 10 11 6.4 0.10 1.68 10 11 9.1 0.22 3.67 11 12
3.8 380 4.5 0.05 0.81 9 11 6.4 0.11 1.77 11 12 9.1 0.23 3.80 11 13
1.7 170 -- -- -- -- -- 4.9 0.13 2.22 11 12 7.6 0.32 5.48 11 13
180° 2.0 200 3.7 0.07 1.20 11 12 5.2 0.14 2.35 11 12 8.2 0.35 5.88 10 12
2.5 250 4.0 0.08 1.35 10 12 5.5 0.16 2.67 11 12 8.5 0.40 6.55 11 12
2.8 280 4.1 0.08 1.40 10 11 5.8 0.17 2.80 10 12 9.1 0.41 6.88 10 11
3.0 300 4.3 0.09 1.46 10 11 6.1 0.17 2.90 10 11 9.1 0.43 7.18 10 12
3.5 350 4.4 0.09 1.56 10 11 6.4 0.19 3.15 9 10 9.1 0.47 7.77 11 13
3.8 380 4.5 0.10 1.62 9 11 6.4 0.19 3.22 9 11 9.1 0.45 8.02 12 13
1.7 170 -- -- -- -- -- 4.9 0.16 2.58 11 12 7.6 0.38 6.40 11 13
210° 2.0 200 3.7 0.09 1.41 11 13 5.2 0.17 2.75 11 13 8.2 0.41 6.85 10 12
2.5 250 4.0 0.10 1.58 10 12 5.5 0.19 3.08 10 12 8.5 0.46 7.65 11 12
2.8 280 4.1 0.10 1.63 10 11 5.8 0.20 3.25 10 12 9.1 0.48 8.02 10 11
3.0 300 4.3 0.10 1.71 10 11 6.1 0.21 3.42 10 11 9.1 0.50 8.37 10 12
3.5 350 4.4 0.11 1.82 10 11 6.4 0.22 3.70 9 10 9.1 0.54 9.03 11 13
3.8 380 4.5 0.11 1.89 9 11 6.4 0.23 3.80 10 11 9.1 0.56 9.37 12 13
1.7 170 -- -- -- -- -- 4.9 0.27 4.42 11 12 7.6 0.66 10.98 11 13
360° 2.0 200 3.5 0.14 2.40 12 14 5.2 0.28 4.72 11 13 8.2 0.70 11.72 10 12
2.5 250 4.0 0.16 2.69 10 12 5.5 0.32 5.28 10 12 8.5 0.79 13.10 11 12
2.8 280 4.1 0.17 2.81 10 12 5.8 0.33 5.55 10 12 9.1 0.83 13.75 10 11
3.0 300 4.3 0.18 2.94 10 11 6.1 0.35 5.80 10 11 9.1 0.87 14.37 10 12
3.5 350 4.4 0.19 3.17 10 11 6.4 0.37 6.25 9 10 9.1 0.93 15.52 11 13
3.8 380 4.5 0.20 3.25 10 11 6.4 0.38 6.40 9 10 9.1 0.96 16.07 12 13

Bold = Recommended pressure

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 47

 ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

MP ROTATOR® Radius: 2.5 to 10.7 m

FEATURES MP1000 2.6 to 4.5 m radius

• Radius can be reduced up to 25% on all models
• Easy arc adjustment
• Colour-coded for easy identification
• Removable filter screen ensures hassle-free service
MP ROTATOR

• Wind-resistant multi-stream technology

►► Automatic matched precipitation
►► Double-pop
►► Distribution uniformity MP1000-90 MP1000-210 MP1000-360
►► Low precipitation rate 90° to 210° 210° to 270° 360°

OPERATING SPECIFICATIONS MP2000 4.0 to 6.4 m radius

• Recommended operating pressure: 2.8 bar; 280 kPa

OPTIONS
• Pair with Pro-Spray® PRS40 to achieve pressure regulation at
the head of 2.8 bar; 280 kPa
• Adding “HT” will specify male threaded nozzles
► = Advanced Feature descriptions on page 45
MP2000-90 MP2000-210 MP2000-360
90° to 210° 210° to 270° 360°

MP3000 6.7 to 9.1 m radius

MP ROTATOR – SPECIFICATION BUILDER: ORDER 1 + 2

1 Model 2 Options
MP1000-90 = 2.5 to 4.5 m radius,
(blank) = No option
adjustable from 90º to 210º
MP1000-210 = 2.5 to 4.5 m radius, HT = Male threaded version
adjustable from 210º to 270º (Not available in 3500)
MP1000-360 = 2.5 to 4.5 m radius, 360º MP3000-90 MP3000-210 MP3000-360
MP2000-90 = 4.0 to 6.4 m radius, 90° to 210° 210° to 270° 360°
adjustable from 90º to 210º
MP2000-210 = 4.0 to 6.4 m radius,
adjustable from 210º to 270º
MP2000-360 = 4.0 to 6.4 m radius, 360º
MP3000-90 = 6.7 to 9.1 m radius,
adjustable from 90º to 210º
MP3000-210 = 6.7 to 9.1 m radius,
adjustable from 210º to 270º
MP3000-360 = 6.7 to 9.1 m radius, 360º
MP3500-90 = 9.4 to 10.7 m radius,
adjustable from 90° to 210°
MPLCS515 = Left corner strip, 1.5 m to 4.5 m
MPRCS515 = Right corner strip, 1.5 m to 4.5 m
MPSS530 = Side strip, 1.5 m to 9.1 m
MPCORNER = 2.5 to 4.5 m radius,
adjustable from 45º to 105º

Examples:
MP1000-210 = 2.5 to 4.5 m radius, adjustable from 210º to 270º
PROS-06-PRS40-CV-MP2000-90 = 15 cm pop-up regulated at 2.8 bar;
280 kPa, drain check valve, with MP2000-90

48 Visit hunterindustries.com
ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

MP ROTATOR PERFORMANCE DATA

MP1000 MP2000 MP3000

Radius: 2.5 to 4.6 m Radius: 4.0 to 6.4 m Radius: 6.7 to 9.1 m
Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle Adjustable Arc and Full-Circle
Maroon: 90° to 210° Black: 90° to 210° Blue: 90° to 210°
Lt. Blue: 210° to 270° Green: 210° to 270° Yellow: 210° to 270°
Olive: 360° Red: 360° Grey: 360°
Arc Pressure Radius Flow Flow Precip mm/hr Radius Flow Flow Precip mm/hr Radius Flow Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min m m3/hr l/min
1.7 170 -- -- -- -- -- 5.2 0.07 1.18 11 12 7.6 0.16 2.63 11 13

MP ROTATOR
90° 2.0 200 3.7 0.04 0.61 11 12 5.5 0.07 1.23 10 11 8.2 0.17 2.77 10 11
2.5 250 4.0 0.04 0.68 10 12 5.8 0.09 1.43 10 12 8.5 0.19 3.08 10 12
2.8 280 4.1 0.04 0.70 10 11 6.1 0.09 1.52 10 11 9.1 0.20 3.25 9 11
3.0 300 4.3 0.04 0.73 10 11 6.4 0.09 1.57 9 10 9.1 0.20 3.38 10 11
3.5 350 4.4 0.05 0.78 10 11 6.4 0.10 1.68 10 11 9.1 0.22 3.67 11 12
3.8 380 4.5 0.05 0.81 9 11 6.4 0.11 1.77 11 12 9.1 0.23 3.80 11 13
1.7 170 -- -- -- -- -- 4.9 0.13 2.22 11 12 7.6 0.32 5.48 11 13
180° 2.0 200 3.7 0.07 1.20 11 12 5.2 0.14 2.35 11 12 8.2 0.35 5.88 10 12
2.5 250 4.0 0.08 1.35 10 12 5.5 0.16 2.67 11 12 8.5 0.4 6.55 11 12
2.8 280 4.1 0.08 1.40 10 11 5.8 0.17 2.80 10 12 9.1 0.41 6.88 10 11
3.0 300 4.3 0.09 1.46 10 11 6.1 0.17 2.90 10 11 9.1 0.43 7.18 10 12
3.5 350 4.4 0.09 1.56 10 11 6.4 0.19 3.15 9 10 9.1 0.47 7.77 11 13
3.8 380 4.5 0.10 1.62 9 11 6.4 0.19 3.22 9 11 9.1 0.45 8.02 12 13
1.7 170 -- -- -- -- -- 4.9 0.16 2.58 11 12 7.6 0.38 6.40 11 13
210° 2.0 200 3.7 0.09 1.41 11 13 5.2 0.17 2.75 11 13 8.2 0.41 6.85 10 12
2.5 250 4.0 0.10 1.58 10 12 5.5 0.19 3.08 10 12 8.5 0.46 7.65 11 12
2.8 280 4.1 0.10 1.63 10 11 5.8 0.20 3.25 10 12 9.1 0.48 8.02 10 11
3.0 300 4.3 0.10 1.71 10 11 6.1 0.21 3.42 10 11 9.1 0.50 8.37 10 12
3.5 350 4.4 0.11 1.82 10 11 6.4 0.22 3.70 9 10 9.1 0.54 9.03 11 13
3.8 380 4.5 0.11 1.89 9 11 6.4 0.23 3.80 10 11 9.1 0.56 9.37 12 13
1.7 170 -- -- -- -- -- 4.9 0.20 3.32 11 12 7.6 0.50 8.35 12 13
270° 2.0 200 3.7 0.11 1.80 11 13 5.2 0.21 3.53 11 13 8.2 0.53 8.83 10 12
2.5 250 4.0 0.12 2.05 10 12 5.5 0.24 3.97 10 12 8.5 0.59 9.82 11 12
2.8 280 4.1 0.13 2.10 10 11 5.8 0.25 4.15 10 12 9.1 0.62 10.32 10 11
3.0 300 4.3 0.13 2.20 10 11 6.1 0.26 4.35 10 11 9.1 0.65 10.77 10 12
3.5 350 4.4 0.14 2.35 10 11 6.4 0.28 4.70 9 10 9.1 0.70 11.68 11 13
3.8 380 4.5 0.15 2.45 9 11 6.4 0.29 4.88 9 11 9.1 0.73 12.12 12 13
1.7 170 -- -- -- -- -- 4.9 0.27 4.42 11 12 7.6 0.66 10.98 11 13
360° 2.0 200 3.7 0.14 2.40 12 14 5.2 0.28 4.72 11 13 8.2 0.70 11.72 10 12
2.5 250 4.0 0.16 2.69 10 12 5.5 0.32 5.28 10 12 8.5 0.76 13.10 11 12
2.8 280 4.1 0.17 2.81 10 12 5.8 0.33 5.55 10 12 9.1 0.83 13.75 10 11
3.0 300 4.3 0.18 2.94 10 11 6.1 0.35 5.80 10 11 9.1 0.87 14.37 10 12
3.5 350 4.4 0.19 3.17 10 11 6.4 0.37 6.25 9 10 9.1 0.93 15.52 11 13
3.8 380 4.5 0.20 3.25 10 11 6.4 0.38 6.40 9 10 9.1 0.96 16.07 12 13

Bold = Optimal pressure for the MP Rotator is 2.8 bar; 280 kPa. This can easily be achieved by using the MP Rotator with the Hunter
PRS40 Spray Body, pressure regulated at 2.8 bar; 280 kPa.

Works best with PRS40

For PRS40 information see page 63

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 49

 ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

MP3500 9.4 to 10.7 radius

MP ROTATOR PERFORMANCE DATA

MP ROTATOR PERFORMANCE DATA

MP3500
Radius: 9.4 to 10.7 m
MP Corner
Adjustable Arc
Radius:Light
2.5 toBrown:
4.5 m 90° to 210°
Adjustable Arc
Arc Pressure Radius45° to Flow
Turquoise: 105° Flow Precip. mm/hr
bar kPa m m3/hr l/min
Arc Pressure Radius Flow Flow
1.7
bar kPa170 m10.1 0.24
m3/hr3.94 9l/min 11
90° 2.0 200 10.4 0.26 4.28 10 11 MP3500-90
MP ROTATOR

1.7 170 -- -- -- 90° to 210°

45° 2.5
2.0
250
200
10.4
3.5
0.28
0.04
4.58 10
0.61
12
2.8 280 10.7 0.29 4.84 10 12
2.5 250 4.0 0.04 0.68
3.0 300 10.7 0.31 5.22 11 13
2.8 280 4.1 0.04 0.70
3.5 350 10.7 0.33 5.41 11 13
3.0 300 4.3 0.04 0.73
3.8 380 10.7 0.34 5.68 12 14
3.5 350 4.4 0.05 0.78
1.7 170 10.1 0.50 8.36 10 11
180° 2.0 3.8 380
200
4.5
10.4
0.05
0.51 8.48 9
0.81
11
1.7 170 3.2 0.07 1.15
90° 2.5 2.0
250
200
10.4
3.5
0.60 10.03
0.08
11
1.27
13
2.8 280 10.7 0.65 10.83 11 13
2.5 250 4.0 0.08 1.40
3.0 300 10.7 0.70 11.73 12 14
2.8 280 4.1 0.09 1.44
3.5 350 10.7 0.73 12.15 13 15
3.0 300 4.3 0.09 1.57
3.8 380 10.7 0.75 12.41 13 15
3.5 350 4.4 0.10 1.67
1.7 170 10.1 0.59 9.80 10 12
210° 2.0 3.8 380
200
4.5
10.4
0.10
0.65 10.75 10
1.73
12
1.7 170 3.2 0.08 1.34
105° 2.5 2.0
250
200
10.4
3.5
0.70
0.09
11.66 11
1.48
13
2.8 280 10.7 0.75 12.45 11 13
2.5 250 4.0 0.10 1.63
3.0 300 10.7 0.80 13.40 12 14
2.8 280 4.1 0.10 1.70
3.5 350 10.7 0.85 14.23 13 15
3.0 300 4.3 0.11 1.83
3.8 380 10.7 0.90 14.91 13 16
3.5 350 4.4 0.12 1.94
Bold = Optimal
3.8 pressure
380 for the MP Rotator
4.5 is 2.8 bar; 280 kPa. This can
0.12 2.00easily be
achieved by using the MP Rotator with the Hunter PRS40 Spray Body, pressure
Bold = Recommended
regulated pressure
at 2.8 bar; 280 kPa.

MP ROTATOR PERFORMANCE DATA MP Strips

MPLCS515: Ivory, MP Left Corner Strip
MPRCS515: Copper, MP Right Corner Strip
MPSS530: Brown, MP Side Strip
Pressure Radius Flow Flow
bar kPa m m3/hr l/min
1.7 170 1.1 x 4.2 0.04 0.67
MP Left 2.0 200 1.2 x 4.3 0.04 0.72
Corner 2.5 250 1.4 x 4.5 0.05 0.79
2.8 280 1.5 x 4.6 0.05 0.84
Strip MPLCS515 MPRCS515 MPSS530
3.0 300 1.6 x 4.7 0.06 0.87 Left Corner Strip Side Strip
Right Corner Strip
3.5 350 1.7 x 4.8 0.06 0.94 1.5 x 4.6 m 1.5 x 4.6 m 1.5 x 9.1 m
3.8 380 1.8 x 4.9 0.06 0.99
1.7 170 1.1 x 4.2 0.04 0.67
MP 2.0 200 1.2 x 4.3 0.04 0.72
Right 2.5 250 1.4 x 4.5 0.05 0.79
2.8 280 1.5 x 4.6 0.05 0.84
Corner 3.0 300 1.6 x 4.7 0.05 0.87
Strip 3.5 350 1.7 x 4.8 0.06 0.94
3.8 380 1.8 x 4.9 0.06 0.99
1.7 170 1.1 x 8.3 0.08 1.34
MP Side 2.0 200 1.2 x 8.6 0.09 1.43
2.5 250 1.4 x 8.9 0.09 1.57
Strip
2.8 280 1.5 x 9.1 0.10 1.66
3.0 300 1.6 x 9.3 0.10 1.72
3.5 350 1.7 x 9.6 0.11 1.87
3.8 380 1.8 x 9.9 0.12 1.96
Notes:
Strip pattern radius can be adjusted by 25%. MP Rotator is designed to maintain
matched precipitation after radius adjustment. Optimal pressure for the
MP Rotator is 2.8 bar; 280 kPa. This can easily be achieved by using the MP Rotator
with the Hunter PRS40 Spray Body, pressure regulated at 2.8 bar; 280 kPa.

50 Visit hunterindustries.com
ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

MP Corner Male Threaded

MP ROTATOR PERFORMANCE DATA

MP Corner
Radius: 2.5 to 4.5 m
Adjustable Arc
Turquoise: 45° to 105°
Arc Pressure Radius Flow Flow
bar kPa m m3/hr l/min
1.7 170 -- -- --
45° 2.0 200 3.5 0.04 0.61 MPCORNER MP-HT

MP ROTATOR
2.5 250 4.0 0.04 0.68 Corner Male Threaded
2.8 280 4.1 0.04 0.70 2.5 to 4.5 m
3.0 300 4.3 0.04 0.73
3.5 350 4.4 0.05 0.78
3.8 380 4.5 0.05 0.81
1.7 170 3.2 0.07 1.15 MP Accessories
90° 2.0 200 3.5 0.08 1.27
2.5 250 4.0 0.08 1.40
2.8 280 4.1 0.09 1.44
3.0 300 4.3 0.09 1.57
3.5 350 4.4 0.10 1.67
3.8 380 4.5 0.10 1.73
1.7 170 3.2 0.08 1.34
105° 2.0 200 3.5 0.09 1.48 MPTOOL
2.5 250 4.0 0.10 1.63 Adjusts all MP Rotators
MPSTICK
2.8 280 4.1 0.10 1.70
Snaps onto any length of
3.0 300 4.3 0.11 1.83
1" (25 mm) PVC to allow
3.5 350 4.4 0.12 1.94 standing adjustment.
3.8 380 4.5 0.12 2.00 PVC pipe not included.
Bold = Recommended pressure

MP ROTATOR PERFORMANCE DATA

MP Rotator MPLCS515: Ivory, MP Left Corner Strip MP Tool for easy adjustments
MPRCS515: Copper, MP Right Corner Strip
MPSS530: Brown, MP Side Strip
Pressure Radius Flow Flow
bar kPa m m3/hr l/min
1.7 170 1.1 x 4.2 0.04 0.67
MP Left 2.0 200 1.2 x 4.3 0.04 0.72
Corner 2.5 250 1.4 x 4.5 0.05 0.79
2.8 280 1.5 x 4.6 0.05 0.84
Strip
3.0 300 1.6 x 4.7 0.06 0.87
3.5 350 1.7 x 4.8 0.06 0.94
3.8 380 1.8 x 4.9 0.06 0.99
1.7 170 1.1 x 4.2 0.04 0.67
MP 2.0 200 1.2 x 4.3 0.04 0.72
Right 2.5 250 1.4 x 4.5 0.05 0.79
2.8 280 1.5 x 4.6 0.05 0.84
Corner 3.0 300 1.6 x 4.7 0.05 0.87
Strip 3.5 350 1.7 x 4.8 0.06 0.94
3.8 380 1.8 x 4.9 0.06 0.99
1.7 170 1.1 x 8.3 0.08 1.34
MP Side 2.0 200 1.2 x 8.6 0.09 1.43
2.5 250 1.4 x 8.9 0.09 1.57
Strip
2.8 280 1.5 x 9.1 0.10 1.66
3.0 300 1.6 x 9.3 0.10 1.72
3.5 350 1.7 x 9.6 0.11 1.87
3.8 380 1.8 x 9.9 0.12 1.96
Notes:
Strip pattern radius can be adjusted by 25%. MP Rotator is designed to maintain
matched precipitation after radius adjustment. Optimal pressure for the
MP Rotator is 2.8 bar; 280 kPa. This can easily be achieved by using the MP Rotator
with the Hunter PRS40 Spray Body, pressure regulated at 2.8 bar; 280 kPa.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 51

 ECO ROTATOR MP ROTATOR® MP ROTATOR® SR

MP ROTATOR® SR Radius: 1.8 to 3.5 m

FEATURES MP800SR 1.8 to 3.5 m radius

• Provides coverage from 1.8 to 3.5 m
• Colour-coded for easy identification
• Removable filter screen prevents large objects from
clogging nozzle NEW
• Wind-resistant multi-stream technology
MP ROTATOR

• Adjustable arc and radius

►► Automatic matched precipitation
►► Double-pop
MP800SR-90 MP800SR-360
►► Distribution uniformity 1.8 to 3.5 m radius adjustable 1.8 to 3.5 m radius
►► Low precipitation rate from 90°-210° 360°

OPERATING SPECIFICATIONS
• Recommended operating pressure: 2.8 bar, 280 kPa
-- 2.8 bar; 280 kPa for max radius settings
-- 2.1 bar; 210 kPa for min radius settings
• Recommended to use with clean water
• MP800SR-90 uses a 60 mesh built-in nozzle filter
• MP800SR-360 uses a 40 mesh built-in nozzle filter MP ROTATOR PERFORMANCE DATA - MP800SR
• Use 150 mesh pre-filter arrangement MP800SR Radius: 1.8 to 3.5 m
• Hunter ACZ, PCZ, or ICZ drip filters are a great solution Adjustable Arc
for zone-specific MP800SR arrangements Orange and Grey: 90° to 210°
Lime Green and Grey: 360°

OPTIONS MAX RADIUS MIN RADIUS

• Specify Pro-Spray PRS40 pop-up for accurate

® Arc Pressure Radius Flow Precip. mm/hr Radius Flow
pressure regulation to achieve typical radius settings bar kPa m m3/hr l/min m m3/hr l/min
2.1 200 2.6 0.04 0.61 22 25 1.8 0.03 0.49
• Specify Pro-Spray PRS30 for accurate pressure 90°
regulation to achieve minimum radius settings 2.5 250 2.9 0.04 0.72 21 24 2.1 0.03 0.55
2.8 280 3.1 0.05 0.87 21 24 2.4 0.04 0.61
► = Advanced Feature descriptions on page 45 3.0 300 3.4 0.06 0.95 20 23 2.4 0.04 0.68
3.5 350 3.5 0.06 1.02 20 23 2.7 0.04 0.72
3.8 380 3.5 0.06 1.06 20 23 3.0 0.05 0.76
2.1 200 2.6 0.07 1.21 22 25 1.8 0.06 0.98
180° 2.5 250 2.8 0.08 1.40 21 24 2.1 0.07 1.10
2.8 280 3.0 0.10 1.59 21 24 2.4 0.07 1.21
3.0 300 3.3 0.10 1.74 19 22 2.4 0.08 1.36
3.5 350 3.4 0.11 1.82 19 22 2.7 0.09 1.44
3.8 380 3.5 0.11 1.89 18 21 3.0 0.09 1.51
2.1 200 2.6 0.08 1.40 22 25 1.8 0.07 1.15
210° 2.5 250 2.8 0.10 1.67 22 25 2.1 0.08 1.28
2.8 280 3.0 0.11 1.85 21 24 2.4 0.08 1.41
3.0 300 3.2 0.12 2.01 20 23 2.4 0.10 1.59
3.5 350 3.4 0.13 2.12 19 22 2.7 0.10 1.68
3.8 380 3.5 0.13 2.20 18 21 3.0 0.11 1.77
2.1 200 2.6 0.14 2.38 22 25 1.8 0.11 1.78
360° 2.5 250 2.8 0.16 2.65 20 23 2.1 0.12 1.97
2.8 280 3.0 0.18 2.95 20 23 2.4 0.13 2.12
3.0 300 3.1 0.19 3.22 20 23 2.4 0.13 2.23
3.5 350 3.3 0.20 3.33 19 21 2.7 0.14 2.38
3.8 380 3.5 0.22 3.71 18 21 3.0 0.16 2.65
Bold = Optimal pressure for the MP Rotator is 2.8 bar; 280 kPa. This can easily be
achieved by using the MP Rotator with the Hunter PRS40 Spray Body, pressure
regulated at 2.8 bar; 280 kPa.

52 Visit hunterindustries.com
 MP ROTATOR
MP800SR
Efficient Watering For Spaces Under 2.4 Metres
Efficiently simulating natural rainfall has always been a challenge in small spaces. Most spray nozzles with
short radius capability apply water much faster than the soil can absorb (50 mm/hr or more), and typically have
poor uniformity. Therefore, many users resort to drip irrigation which does not simulate rainfall, and cannot
be used in turf applications. Up to now, high-volume, inefficient overhead sprays have been the only solution.

Now, Hunter introduces the MP800SR, a high-efficiency overhead irrigation solution for small spaces.
The MP800SR will adjust down to 1.8 m, and uses a low precipitation rate of 20 mm/hr to help avoid runoff.
Its superior distribution uniformity ensures that the least amount of water is used to get the job done.

To achieve its lowest radius setting of 1.8 m, an inlet pressure of 2.1 bar; 210 kPa is required. The MP800SR
should be paired with the PRS30 in this application.

53
 54
SPRAYS
SECTION 03:
SPRAYS

SPRAYS

55
 SPRAYS
ADVANCED FEATURES
STRENGTH & DURABILITY
SPRAYS

CO-MOLDED WIPER SEAL INNOVATIVE SEAL DESIGN

The pressure-activated, multi-function Pedestrian traffic, landscaping equipment, temperature
wiper seal regulates flow-by during changes, and cycling pressures can often cause body caps
start up, keeping debris out of the to loosen. Most spray bodies utilize an O-Ring, which
seal to reduce riser stick-ups. Once breaks seal immediately after loosening. The Pro-Spray
the head is fully popped up, the wiper can withstand more than one full 360º turn and remain
seal completely seals off the riser gap sealed at any pressure.
allowing for the maximum number of
heads per zone.

HEAVY-DUTY SPRING PRO-SPRAY® CHECK VALVE

The industryʼs strongest spring Optional check valves eliminate leaks
for positive retraction under any and puddles at the lower heads,
conditions. protecting landscapes from damage
and erosion while reducing water
waste. Choose from the convenience
of factory-installed check valves or the
flexibility of field installation.

PRESSURE REGULATED TO INDUSTRYʼS STRONGEST SPRAY BODY

2.1 & 2.8 BAR
The Pro-Spray line incorporates a heavy-duty ribbed body and
Hunter’s pressure regulated pop-up durable cap engineered to withstand the harshest environ-
sprays are calibrated for the needs ments, including the rigors of foot traffic and the abuses of
of any installation. The PRS30 with the heavy machinery. In addition, the buttress thread design
brown cap optimises performance of provides superior strength in cap-to-body gripping capacity
traditional sprays at 2.1 bar; 210 kPa. helping the head to withstand high inlet surge pressures.
The grey-capped 2.8 bar; 280 kPa
PRS40 is designed for the efficient
MP Rotator and is the only 2.8 bar;
280 kPa regulated pop-up on the
market today.

COMPETITOR PRO-SPRAY
Competitor: Significant leaking at the body cap.
Pro-Spray: Seal remains intact.

56
SPRAY BODY COMPARISON CHART

QUICK SPECS PS ULTRA PRO-SPRAY® PRS30 PRS40

SPRAYS
Good Better Best for Sprays Best for MP Rotator®

POP-UP HEIGHT cm 5, 10, 15 Shrub, 5, 7.5, 10, 15, 30 Shrub, 10, 15, 30 Shrub, 10, 15, 30

bar N/A N/A 2.1 2.8

PRESSURE REGULATED
kPa N/A N/A 210 280

FEATURES
PRE-INSTALLED NOZZLE 5SS, 10A, 12A, 15A, 17A N/A N/A N/A

CAP COLOUR Black Black Brown Grey

Field Installed or Field Installed or
CHECK VALVES Field Installed Factory Installed
Factory Installed Factory Installed
WARRANTY 2 Years 5 Years 5 Years 5 Years

ADVANCED FEATURES
BODY STYLE Slim Line Rugged Body Rugged Body Rugged Body

SPRING Standard Heavy Duty Heavy Duty Heavy Duty

CO-MOLDED WIPER SEAL ⬤ ⬤ ⬤

RECLAIMED CAP ⬤ ⬤ ⬤

PRESSURE REGULATION ⬤ ⬤

APPLICATIONS
TURFGRASS ⬤ ⬤ ⬤ ⬤

TURFGRASS: TALL MOWING HEIGHT ⬤ ⬤ ⬤ ⬤

SHRUBS: SPRINKLERS ON RISERS ⬤ ⬤ ⬤

SHRUBS: TALL POP-UP SPRINKLERS ⬤ ⬤ ⬤

RESIDENTIAL ⬤ ⬤ ⬤ ⬤

COMMERCIAL/MUNICIPALITIES ⬤ ⬤ ⬤

HIGH TRAFFIC AREAS ⬤ ⬤ ⬤

RECLAIMED WATER ⬤ ⬤ ⬤

57
 PS ULTRA PRO-SPRAY® PRS30 PRS40

PS ULTRA
Models: 5 cm, 10 cm, 15 cm
Inlet: ½"

FEATURES
• Models: 5 cm, 10 cm, 15 cm
• Pre-installed Pro Adjustable or Strip nozzle option
• Durable cap
• Two-piece ratcheting riser PSU-02
• Male threaded riser to accept all female nozzles Retracted height: 13 cm
• Available with flush plug (large filter screen not included) Pop-up height: 5 cm
Exposed diameter: 3 cm
• Extra large filter screen Inlet size: ½"
• Warranty period: 2 years
NOZZLES

►► Optional check valve

►► Heavy-duty spring

OPERATING SPECIFICATIONS
• Operational pressure range: 1.0 to 4.8 bar; 100 to 480 kPa

FACTORY INSTALLED OPTIONS

• Nozzles: 3.0 m, 3.7 m, 4.6 m, 5.2 m, 1.5 x 9.0 m side strip (side strip pattern
PSU-04
available on 5 cm and 10 cm models only) Retracted height: 18 cm
• Flush plug (large filter screen not included) Pop-up height: 10 cm
• Optional extra large filter screen Exposed diameter: 3 cm
Inlet size: ½"

USER INSTALLED OPTIONS

• Drain check valve: 10 cm and 15 cm models
(up to 2 m of elevation; P/N 462237)
• Large inlet filter screen (replacement; P/N 162900)

► = Advanced Feature descriptions on page 56

PS ULTRA – SPECIFICATION BUILDER: ORDER 1 + 2 PSU-06

Retracted height: 24 cm
1 Model 2 Nozzles 3 Optional Pop-up height: 15 cm
Exposed diameter: 3 cm
PSU-02 = 5 cm Pop-up (blank) = Flush plug, no large filter screen NFO = Nozzle filter only
Inlet size: ½"
(Available for10 cm
PSU-04 = 10 cm Pop-up 10A = 3.0 m adjustable nozzle
model only)
PSU-06 = 15 cm Pop-up 12A = 3.7 m adjustable nozzle Substitute standard
installation of large
15A = 4.6 m adjustable nozzle inlet filter screen and
17A = 5.2 m adjustable nozzle receive unit with the
nozzle filter only
5SS = 1.5 m x 9.0 m side strip
(02 and 04 only)

Examples:
PSU-02 - 5SS = 5 cm Pop-up, with a 1.5 m x 9.0 m side strip
PSU-06 - 10A = 15 cm Pop-up, with a 3.0 m adjustable nozzle
PSU-04 = 10 cm Pop-up, with flush plug, large filter screen not included
PSU-04 - 12A - NFO = 10 cm Pop-up, with a 3.7 m adjustable nozzle

58 Visit hunterindustries.com
PS ULTRA PRO-SPRAY® PRS30 PRS40

PS ULTRA STANDARD NOZZLES PERFORMANCE DATA

10A 3.0 m radius

Adjustable from 0° to 360°
12A 3.7 m radius
Adjustable from 0° to 360°
Red Trajectory: 15° Green Trajectory: 28°

Arc Pressure Radius Flow Precip mm/hr Radius Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min
1.0 100 2.6 0.04 0.68 49 56 3.2 0.04 0.73 34 40
45° 1.5 150 2.8 0.05 0.80 49 57 3.4 0.06 0.97 40 46
2.1 210 3.0 0.06 0.94 49 56 3.7 0.07 1.23 44 51
2.5 250 3.2 0.06 1.06 48 56 3.9 0.09 1.44 46 54
3.0 300 3.5 0.07 1.18 47 54 4.1 0.10 1.68 48 56
1.0 100 2.6 0.08 1.35 49 56 3.2 0.09 1.46 34 40
90° 1.5 150 2.8 0.10 1.61 49 57 3.4 0.12 1.93 40 46

SPRAYS
2.1 210 3.0 0.11 1.89 49 56 3.7 0.15 2.46 44 51
2.5 250 3.2 0.13 2.11 48 56 3.9 0.17 2.88 46 54
3.0 300 3.5 0.14 2.37 47 54 4.1 0.20 3.36 48 56
1.0 100 2.6 0.11 1.80 49 56 3.2 0.12 1.94 34 40
120° 1.5 150 2.8 0.13 2.14 49 57 3.4 0.15 2.58 40 46
2.1 210 3.0 0.15 2.52 49 56 3.7 0.20 3.28 44 51
2.5 250 3.2 0.17 2.82 48 56 3.9 0.23 3.84 46 54
3.0 300 3.5 0.19 3.16 47 54 4.1 0.27 4.48 48 56
1.0 100 2.6 0.16 2.71 49 56 3.2 0.17 2.91 34 40
180° 1.5 150 2.8 0.19 3.21 49 57 3.4 0.23 3.86 40 46
2.1 210 3.0 0.23 3.78 49 56 3.7 0.30 4.92 44 51
2.5 250 3.2 0.25 4.23 48 56 3.9 0.35 5.76 46 54
3.0 300 3.5 0.28 4.73 47 54 4.1 0.40 6.71 48 56
1.0 100 2.6 0.22 3.61 49 56 3.2 0.23 3.88 34 40
240° 1.5 150 2.8 0.26 4.28 49 57 3.4 0.31 5.15 40 46
2.1 210 3.0 0.30 5.03 49 56 3.7 0.39 6.56 44 51
2.5 250 3.2 0.34 5.64 48 56 3.9 0.46 7.68 46 54
3.0 300 3.5 0.38 6.31 47 54 4.1 0.54 8.95 48 56
1.0 100 2.6 0.24 4.06 49 56 3.2 0.26 4.37 34 40
270° 1.5 150 2.8 0.29 4.82 49 57 3.4 0.35 5.80 40 46
2.1 210 3.0 0.34 5.66 49 56 3.7 0.44 7.38 44 51
2.5 250 3.2 0.38 6.34 48 56 3.9 0.52 8.65 46 54
3.0 300 3.5 0.43 7.10 47 54 4.1 0.60 48 56
1.0 100 2.6 0.32 5.41 49 56 3.2 0.35 5.83 34 40
360° 1.5 150 2.8 0.39 6.43 49 57 3.4 0.46 7.73 40 46
2.1 210 3.0 0.45 7.55 49 56 3.7 0.59 9.84 44 51
2.5 250 3.2 0.51 8.45 48 56 3.9 0.69 11.53 46 54
3.0 300 3.5 0.57 9.47 47 54 4.1 0.81 13.43 48 56

Bold = Recommended pressure

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 59

 PS ULTRA PRO-SPRAY® PRS30 PRS40

PS ULTRA STANDARD NOZZLES PERFORMANCE DATA

15A 4.6 m radius

Adjustable from 0° to 360°
17A 5.2 m radius
Adjustable from 0° to 360°
Black Trajectory: 28° Grey Trajectory: 28°

Arc Pressure Radius Flow Precip mm/hr Radius Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min
1.0 100 4.0 0.08 1.27 38 43 4.6 0.10 1.68 38 43
45° 1.5 150 4.3 0.09 1.51 39 45 4.9 0.12 1.94 38 44
2.1 210 4.6 0.11 1.79 40 46 5.2 0.13 2.23 39 45
2.5 250 4.9 0.12 2.00 40 46 5.5 0.15 2.46 39 45
3.0 300 5.2 0.14 2.25 40 46 5.8 0.16 2.72 39 45
1.0 100 4.0 0.15 2.53 38 43 4.6 0.20 3.36 38 43
90° 1.5 150 4.3 0.18 3.03 39 45 4.9 0.23 3.88 38 44
SPRAYS

2.1 210 4.6 0.21 3.57 40 46 5.2 0.27 4.45 39 45

2.5 250 4.9 0.24 4.01 40 46 5.5 0.30 4.92 39 45
3.0 300 5.2 0.27 4.50 40 46 5.8 0.33 5.44 39 45
1.0 100 4.0 0.20 3.38 38 43 4.6 0.27 4.48 38 43
120° 1.5 150 4.3 0.24 4.03 39 45 4.9 0.31 5.17 38 44
2.1 210 4.6 0.29 4.76 40 46 5.2 0.36 5.94 39 45
2.5 250 4.9 0.32 5.34 40 46 5.5 0.39 6.56 39 45
3.0 300 5.2 0.36 6.00 40 46 5.8 0.43 7.25 39 45
1.0 100 4.0 0.30 5.07 38 43 4.6 0.40 6.71 38 43
180° 1.5 150 4.3 0.36 6.05 39 45 4.9 0.47 7.75 38 44
2.1 210 4.6 0.43 7.14 40 46 5.2 0.53 8.91 39 45
2.5 250 4.9 0.48 8.02 40 46 5.5 0.59 9.83 39 45
3.0 300 5.2 0.54 9.00 40 46 5.8 0.65 10.87 39 45
1.0 100 4.0 0.41 6.76 38 43 4.6 0.54 8.95 38 43
240° 1.5 150 4.3 0.48 8.07 39 45 4.9 0.62 10.34 38 44
2.1 210 4.6 0.57 9.52 40 46 5.2 0.71 11.88 39 45
2.5 250 4.9 0.64 10.69 40 46 5.5 0.79 13.11 39 45
3.0 300 5.2 0.72 12.00 40 46 5.8 0.87 14.50 39 45
1.0 100 4.0 0.46 7.60 38 43 4.6 0.60 10.07 38 43
270° 1.5 150 4.3 0.54 9.08 39 45 4.9 0.70 11.63 38 44
2.1 210 4.6 0.64 10.71 40 46 5.2 0.80 13.36 39 45
2.5 250 4.9 0.72 12.03 40 46 5.5 0.89 14.75 39 45
3.0 300 5.2 0.81 13.50 40 46 5.8 0.98 16.31 39 45
1.0 100 4.0 0.61 10.13 38 43 4.6 0.81 13.43 38 43
360° 1.5 150 4.3 0.73 12.10 39 45 4.9 0.93 15.51 38 44
2.1 210 4.6 0.86 14.28 40 46 5.2 1.07 17.82 39 45
2.5 250 4.9 0.96 16.03 40 46 5.5 1.18 19.67 39 45
3.0 300 5.2 1.08 18.00 40 46 5.8 1.30 21.75 39 45

Bold = Recommended pressure

STRIP PATTERN NOZZLE PERFORMANCE DATA

Model Pressure Width x Length Flow

bar kPa m m3/hr l/min
1.0 100 1.2 x 8.5 0.21 3.5
1.5 150 1.5 x 9.0 0.25 4.2
SS-530
2.0 200 1.5 x 9.0 0.29 4.9
2.1 210 1.5 x 9.0 0.30 5.0
2.5 250 1.5 x 9.0 0.33 5.5

Bold = Recommended pressure

60 Visit hunterindustries.com
PS ULTRA PRO-SPRAY® PRS30 PRS40

PRO-SPRAY ® Models: Shrub, 5 cm, 7.5 cm, 10 cm, 15 cm, 30 cm

Inlet: ½"

FEATURES
• Models: Shrub, 5 cm, 7.5 cm, 10 cm, 15 cm, 30 cm
• Compatible with all female threaded nozzles
• No side inlet (NSI) version available in 15 cm and 30 cm
• Innovative directional flush plug
• Warranty period: 5 years
►► Co-molded wiper seal
►► Heavy-duty spring
PROS-00 PROS-02
►► Industryʼs strongest spray body Retracted height: 4 cm Retracted height: 10 cm
►► Innovative seal design Inlet size: ½" Pop-up height: 5 cm

SPRAYS
►► Pro-Spray check valve Exposed diameter: 5.7 cm
Inlet size: ½"

OPERATING SPECIFICATIONS
• Operational pressure range: 1.0 to 7.0 bar; 100 to 700 kPa

FACTORY INSTALLED OPTIONS

• Drain check valve (up to 3 m of elevation)
• Reclaimed water ID cap

USER INSTALLED OPTIONS

• Drain check valve (up to 3 m of elevation; P/N 437400)
• Reclaimed water ID cap (P/N 458520)
• Snap-on reclaimed cover (P/N PROSRCCAP) PROS-03 PROS-04
Retracted height: 12.5 cm Retracted height: 15.5 cm
► = Advanced Feature descriptions on page 56 Pop-up height: 7.5 cm Pop-up height: 10 cm
Exposed diameter: 5.7 cm Exposed diameter: 5.7 cm
Inlet size: ½" Inlet size: ½"

Pro-Spray Reclaimed
Pro-Spray models include optional factory-installed
purple reclaimed caps.

PRO-SPRAY – SPECIFICATION BUILDER: ORDER 1 + 2

1 Model 2 Options
PROS-00 = Shrub Adapter (blank) = No option
PROS-02 = 5 cm Pop-up CV = Factory-installed drain
check valve (Pop-up models only)
PROS-03 = 7.5 cm Pop-up 15 cm and 30 cm models ordered
[A] [B] [A] [B]
PROS-04 = 10 cm Pop-up R = Factory-installed reclaimed
body cap (shrub molded in purple)
PROS-06 = 15 cm Pop-up [A] PROS-06 [A] PROS-12
[B] PROS-06-NSI [B] PROS-12-NSI
PROS-06-NSI = 15 cm Pop-up (no side inlet)
Retracted height: 22.5 cm Retracted height: 41 cm
PROS-12 = 30 cm Pop-up Pop-up height: 15 cm Pop-up height: 30 cm
Exposed diameter: 5.7 cm Exposed diameter: 5.7 cm
PROS-12-NSI = 30 cm Pop-up (no side inlet)
Inlet size: ½" Inlet size: ½"
Examples:
PROS-04 = 10 cm Pop-up
PROS-06 - CV = 15 cm Pop-up, drain check valve
PROS-12 - CV - R = 30 cm Pop-up, drain check valve, reclaimed body cap

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 61

 PS ULTRA PRO-SPRAY® PRS30 PRS40

PRS30
Models: Shrub, 10 cm, 15 cm, 30 cm
Pressure Regulation: 2.1 bar; 210 kPa
PRESSURE REGULATED

FEATURES
• Models: Shrub, 10 cm, 15 cm, 30 cm
• No side inlet (NSI) version available in 15 cm and 30 cm
• Innovative directional flush plug design
• Warranty period: 5 years
►► Co-molded wiper seal
►► Heavy-duty spring
►► Industry’s strongest spray body
►► Innovative seal design
►► Pro-Spray® check valve
SPRAYS

►► Pressure regulated to 2.1 bar

OPERATING SPECIFICATIONS
• Operational pressure range: 1.0 to 7.0 bar; 100 to 700 kPa PROS-00-PRS30 PROS-04-PRS30
Retracted height: 11 cm Retracted height: 15.5 cm
Inlet size: ½" Pop-up height: 10 cm
FACTORY INSTALLED OPTIONS Exposed diameter: 5.7 cm
Inlet size: ½"
• Drain check valve (up to 4.3 m of elevation)
• Check valve available on 10 cm, 15 cm, 30 cm
• Reclaimed water ID cap

USER INSTALLED OPTIONS

• Vandal-proof cap (P/N PROS-PRS30-VPC)
• Drain check valve (up to 4.3 m of elevation; P/N 457400)
• Reclaimed water ID cap (P/N 458560)
• Snap-on reclaimed cover (P/N PROSRCCAP)

► = Advanced Feature descriptions on page 56

PRS30 Reclaimed
PRS30 models include optional factory-installed
purple reclaimed caps.

Related Solutions: Works Best With

[A] [B] [A] [B]
Pro-Spray Fixed Arc Nozzles and
ProAdjustable Nozzles work best with the
PRS30. [A] PROS-06-PRS30 [A] PROS-12-PRS30
[B] PROS-06-NSI-PRS30 [B] PROS-12-NSI-PRS30
PRS30 – SPECIFICATION BUILDER: ORDER 1 + 2 Retracted height: 22.5 cm Retracted height: 41 cm
Pop-up height: 15 cm Pop-up height: 30 cm
1 Model 2 Options
Exposed diameter: 5.7 cm
Exposed diameter: 5.7 cm
PROS-00-PRS30 = 2.1 bar regulated shrub adapter (blank) = No option Inlet size: ½" Inlet size: ½"

PROS-04-PRS30 = 2.1 bar regulated 10 cm Pop-up CV = Factory-installed drain

check valve
PROS-06-PRS30 = 2.1 bar regulated 15 cm Pop-up (pop-up models only)
15 cm and 30 cm models
PROS-06-NSI-PRS30 = 2.1 bar regulated 15 cm Pop-up ordered as CV will come
(no side inlet) as no side inlet
PROS-12-PRS30 = 2.1 bar regulated 30 cm Pop-up R = Factory-installed
PROS-12-NSI-PRS30 = 2.1 bar regulated 30 cm Pop-up reclaimed body cap
(no side inlet) (shrub molded in purple)

Examples:
PROS-04-PRS30 = 10 cm Pop-up regulated at 2.1 bar; 210 kPa
PROS-06-PRS30 - CV = 15 cm Pop-up regulated at 2.1 bar; 210 kPa, drain check valve
PROS-12-PRS30 - CV - R = 30 cm Pop-up regulated at 2.1 bar; 210 kPa, drain check valve, and
reclaimed body cap

62 Visit hunterindustries.com
PS ULTRA PRO-SPRAY® PRS30 PRS40

PRS40
Models: Shrub, 10 cm, 15 cm, 30 cm
Pressure Regulation: 2.8 bar; 280 kPa
PRESSURE REGULATED

FEATURES
• Models: Shrub, 10 cm, 15 cm, 30 cm
• Grey identification cap for easy field ID
• Innovative directional flush plug design
• Drain check valve installed with up to 4.3 m of elevation comes standard
• 15 cm and 30 cm models come standard as no side inlet (NSI),
ensuring proper installation with check valve
• Warranty period: 5 years
►► Co-molded wiper seal
►► Heavy-duty spring

SPRAYS
►► Industry’s strongest spray body
►► Innovative seal design
►► Pro-Spray® check valve
►► Pressure regulated to 2.8 bar PROS-00-PRS40 PROS-04-PRS40-CV
Retracted height: 11 cm Retracted height: 15.5 cm
Inlet size: ½" Pop-up height: 10 cm
OPERATING SPECIFICATIONS Exposed diameter: 5.7 cm
• Operational pressure range: 1.0 to 7.0 bar; 100 to 700 kPa Inlet size: ½"

FACTORY INSTALLED OPTIONS

• Reclaimed water ID cap

USER INSTALLED OPTIONS

• Reclaimed water ID cap (P/N 458562)
• Snap-on reclaimed cover (P/N PROSRCCAP)

► = Advanced Feature descriptions on page 56

PRS40 Reclaimed
PRS40 models include optional factory-installed purple
reclaimed caps.

Related Solutions: MP Rotator

PRS40 is designed specifically for the MP Rotator.

PRS40 – SPECIFICATION BUILDER: ORDER 1 + 2 PROS-06-PRS40-CV PROS-12-PRS40-CV

Retracted height: 22.5 cm Retracted height: 41 cm
1 Model 2 Options Pop-up height: 15 cm Pop-up height: 30 cm
Exposed diameter: 5.7 cm Exposed diameter: 5.7 cm
PROS-00-PRS40 = 2.8 bar regulated shrub adapter (blank) = No option
Inlet size: ½" Inlet size: ½"
CV = Factory-installed drain
PROS-04-PRS40 = 2.8 bar regulated 10 cm Pop-up check valve
(pop-up models only)
PROS-06-PRS40 = 2.8 bar regulated 15 cm Pop-up 15 cm and 30 cm models
ordered as CV will come
PROS-12-PRS40 = 2.8 bar regulated 30 cm Pop-up as no side inlet

R = Factory-installed re-
claimed body cap
(shrub molded in purple)

Examples:
PROS-04-PRS40 = 10 cm Pop-up regulated at 2.8 bar
PROS-06-PRS40 - CV = 15 cm Pop-up regulated at 2.8 bar and drain check valve
PROS-12-PRS40 - CV - R = 30 cm Pop-up regulated at 2.8 bar, drain check valve
and reclaimed body cap

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 63

 NOZZLES
NOZZLES

64
PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO ADJUSTABLE NOZZLES

FEATURES
• Crisp, well-defined edges
• Matched precipitation rate on each nozzle from 8A to 17A
• Easy grip top for simple adjustment
• Large water droplets cut through wind
• Colour-coded for easy field identification
• Adjustable from 0° to 360° 4A Nozzle 6A Nozzle
Radius: 1.2 m Radius: 1.8 m

OPERATING SPECIFICATIONS

NOZZLES
• Recommended operating pressure: 2.1 bar and 210 kPa
• Specify the Pro-Spray® PRS30 pop-up for accurate pressure
regulation of 2.1 bar; 210 kPa

8A Nozzle 10A Nozzle

Radius: 2.4 m Radius: 3.0 m

12A Nozzle 15A Nozzle

Radius: 3.7 m Radius: 4.6 m

17A Nozzle
Radius: 5.2 m

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 65

 PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO ADJUSTABLE NOZZLES PERFORMANCE DATA

4A 1.2 m radius
Adjustable from 0° to 360°
6A 1.8 m radius
Adjustable from 0° to 360°
8A 2.4 m radius
Adjustable from 0° to 360°
Lt. Green Trajectory: 0° Lt. Blue Trajectory: 0° Brown Trajectory: 0°

Arc Pressure Radius Flow Precip mm/hr Radius Flow Precip mm/hr Radius Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min m m3/hr l/min
1.0 100 0.9 0.02 0.31 187 216 1.5 0.03 0.54 117 136 2.0 0.04 0.62 77 89
45° 1.5 150 1.0 0.02 0.39 178 206 1.6 0.04 0.60 108 124 2.2 0.04 0.72 72 83
2.1 210 1.2 0.03 0.48 167 193 1.8 0.04 0.65 98 114 2.4 0.05 0.83 67 77
2.5 250 1.3 0.03 0.56 158 183 1.9 0.04 0.70 92 106 2.6 0.05 0.91 63 73
3.0 300 1.4 0.04 0.64 149 172 2.1 0.05 0.75 86 99 2.9 0.06 1.01 59 68
1.0 100 0.9 0.02 0.31 93 108 1.5 0.06 1.08 116 134 2.0 0.07 1.24 77 89
90° 1.5 150 1.0 0.02 0.39 89 103 1.6 0.07 1.21 109 126 2.2 0.09 1.44 72 83
NOZZLES

2.1 210 1.2 0.03 0.48 84 97 1.8 0.08 1.35 102 118 2.4 0.10 1.65 67 77
2.5 250 1.3 0.03 0.56 79 91 1.9 0.09 1.47 97 112 2.6 0.11 1.82 63 73
3.0 300 1.4 0.04 0.64 75 86 2.1 0.10 1.61 92 106 2.9 0.12 2.02 59 68
1.0 100 0.9 0.06 0.97 221 255 1.5 0.08 1.26 102 118 2.0 0.10 1.66 77 89
120° 1.5 150 1.0 0.07 1.10 188 217 1.6 0.09 1.43 97 112 2.2 0.11 1.92 72 83
2.1 210 1.2 0.07 1.25 162 187 1.8 0.10 1.61 91 105 2.4 0.13 2.20 67 77
2.5 250 1.3 0.08 1.36 146 168 1.9 0.11 1.76 87 100 2.6 0.15 2.43 63 73
3.0 300 1.4 0.09 1.49 131 151 2.1 0.12 1.93 82 95 2.9 0.16 2.69 59 68
1.0 100 0.9 0.07 1.18 178 206 1.5 0.10 1.70 92 106 2.0 0.15 2.49 77 89
180° 1.5 150 1.0 0.08 1.38 157 181 1.6 0.12 1.96 88 102 2.2 0.17 2.87 72 83
2.1 210 1.2 0.10 1.60 139 160 1.8 0.13 2.24 84 97 2.4 0.20 3.30 67 77
2.5 250 1.3 0.11 1.78 127 146 1.9 0.15 2.47 81 94 2.6 0.22 3.65 63 73
3.0 300 1.4 0.12 1.98 115 133 2.1 0.16 2.72 78 90 2.9 0.24 4.03 59 68
1.0 100 0.9 0.12 1.94 220 254 1.5 0.15 2.44 99 114 2.0 0.20 3.32 77 89
240° 1.5 150 1.0 0.13 2.24 192 221 1.6 0.17 2.83 96 111 2.2 0.23 3.83 72 83
2.1 210 1.2 0.16 2.59 168 194 1.8 0.20 3.28 92 107 2.4 0.26 4.40 67 77
2.5 250 1.3 0.17 2.86 153 177 1.9 0.22 3.63 89 103 2.6 0.29 4.86 63 73
3.0 300 1.4 0.19 3.17 139 160 2.1 0.24 4.03 86 99 2.9 0.32 5.38 59 68
1.0 100 0.9 0.13 2.09 211 244 1.5 0.18 3.08 111 128 2.0 0.22 3.73 77 89
270° 1.5 150 1.0 0.14 2.40 183 211 1.6 0.21 3.52 106 122 2.2 0.26 4.31 72 83
2.1 210 1.2 0.16 2.75 159 183 1.8 0.24 4.02 101 116 2.4 0.30 4.95 67 77
2.5 250 1.3 0.18 3.02 144 166 1.9 0.27 4.42 97 112 2.6 0.33 5.47 63 73
3.0 300 1.4 0.20 3.33 130 150 2.1 0.29 4.87 92 107 2.9 0.36 6.05 59 68
1.0 100 0.9 0.14 2.26 171 197 1.5 0.21 3.57 96 111 2.0 0.30 4.97 77 89
360° 1.5 150 1.0 0.16 2.60 148 171 1.6 0.24 4.07 92 106 2.2 0.34 5.75 72 83
2.1 210 1.2 0.18 2.98 129 149 1.8 0.28 4.62 87 100 2.4 0.40 6.61 67 77
2.5 250 1.3 0.20 3.29 117 135 1.9 0.30 5.06 83 96 2.6 0.44 7.29 63 73
3.0 300 1.4 0.22 3.63 106 122 2.1 0.33 5.56 79 92 2.9 0.48 8.07 59 68

Bold = Recommended pressure

Note: The Pro-Spray PRS30’s built-in pressure regulator controls
output to a maximum of 2.1 bar; 210 kPa. Adjusting the radius
reduction screw may be required to achieve catalogue radius and flow.

66 Visit hunterindustries.com
PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO ADJUSTABLE NOZZLES PERFORMANCE DATA

10A 3.0 m radius

Adjustable from 0° to 360°
12A 3.7 m radius
Adjustable from 0° to 360°
15A 4.6 m radius
Adjustable from 0° to 360°
Red Trajectory: 15° Green Trajectory: 28° Black Trajectory: 28°

Arc Pressure Radius Flow Precip mm/hr Radius Flow Precip mm/hr Radius Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min m m3/hr l/min
1.0 100 2.6 0.04 0.68 49 56 3.2 0.04 0.73 34 40 4.0 0.08 1.27 38 43
45° 1.5 150 2.8 0.05 0.80 49 57 3.4 0.06 0.97 40 46 4.3 0.09 1.51 39 45
2.1 210 3.0 0.06 0.94 49 56 3.7 0.07 1.23 44 51 4.6 0.11 1.79 40 46
2.5 250 3.2 0.06 1.06 48 56 3.9 0.09 1.44 46 54 4.9 0.12 2.00 40 46
3.0 300 3.5 0.07 1.18 47 54 4.1 0.10 1.68 48 56 5.2 0.14 2.25 40 46
1.0 100 2.6 0.08 1.35 49 56 3.2 0.09 1.46 34 40 4.0 0.15 2.53 38 43
90° 1.5 150 2.8 0.10 1.61 49 57 3.4 0.12 1.93 40 46 4.3 0.18 3.03 39 45

NOZZLES
2.1 210 3.0 0.11 1.89 49 56 3.7 0.15 2.46 44 51 4.6 0.21 3.57 40 46
2.5 250 3.2 0.13 2.11 48 56 3.9 0.17 2.88 46 54 4.9 0.24 4.01 40 46
3.0 300 3.5 0.14 2.37 47 54 4.1 0.20 3.36 48 56 5.2 0.27 4.50 40 46
1.0 100 2.6 0.11 1.80 49 56 3.2 0.12 1.94 34 40 4.0 0.20 3.38 38 43
120° 1.5 150 2.8 0.13 2.14 49 57 3.4 0.15 2.58 40 46 4.3 0.24 4.03 39 45
2.1 210 3.0 0.15 2.52 49 56 3.7 0.20 3.28 44 51 4.6 0.29 4.76 40 46
2.5 250 3.2 0.17 2.82 48 56 3.9 0.23 3.84 46 54 4.9 0.32 5.34 40 46
3.0 300 3.5 0.19 3.16 47 54 4.1 0.27 4.48 48 56 5.2 0.36 6.00 40 46
1.0 100 2.6 0.16 2.71 49 56 3.2 0.17 2.91 34 40 4.0 0.30 5.07 38 43
180° 1.5 150 2.8 0.19 3.21 49 57 3.4 0.23 3.86 40 46 4.3 0.36 6.05 39 45
2.1 210 3.0 0.23 3.78 49 56 3.7 0.30 4.92 44 51 4.6 0.43 7.14 40 46
2.5 250 3.2 0.25 4.23 48 56 3.9 0.35 5.76 46 54 4.9 0.48 8.02 40 46
3.0 300 3.5 0.28 4.73 47 54 4.1 0.40 6.71 48 56 5.2 0.54 9.00 40 46
1.0 100 2.6 0.22 3.61 49 56 3.2 0.23 3.88 34 40 4.0 0.41 6.76 38 43
240° 1.5 150 2.8 0.26 4.28 49 57 3.4 0.31 5.15 40 46 4.3 0.48 8.07 39 45
2.1 210 3.0 0.30 5.03 49 56 3.7 0.39 6.56 44 51 4.6 0.57 9.52 40 46
2.5 250 3.2 0.34 5.64 48 56 3.9 0.46 7.68 46 54 4.9 0.64 10.69 40 46
3.0 300 3.5 0.38 6.31 47 54 4.1 0.54 8.95 48 56 5.2 0.72 12.00 40 46
1.0 100 2.6 0.24 4.06 49 56 3.2 0.26 4.37 34 40 4.0 0.46 7.60 38 43
270° 1.5 150 2.8 0.29 4.82 49 57 3.4 0.35 5.80 40 46 4.3 0.54 9.08 39 45
2.1 210 3.0 0.34 5.66 49 56 3.7 0.44 7.38 44 51 4.6 0.64 10.71 40 46
2.5 250 3.2 0.38 6.34 48 56 3.9 0.52 8.65 46 54 4.9 0.72 12.03 40 46
3.0 300 3.5 0.43 7.10 47 54 4.1 0.60 10.07 48 56 5.2 0.81 13.50 40 46
1.0 100 2.6 0.32 5.41 49 56 3.2 0.35 5.83 34 40 4.0 0.61 10.13 38 43
360° 1.5 150 2.8 0.39 6.43 49 57 3.4 0.46 7.73 40 46 4.3 0.73 12.10 39 45
2.1 210 3.0 0.45 7.55 49 56 3.7 0.59 9.84 44 51 4.6 0.86 14.28 40 46
2.5 250 3.2 0.51 8.45 48 56 3.9 0.69 11.53 46 54 4.9 0.96 16.03 40 46
3.0 300 3.5 0.57 9.47 47 54 4.1 0.81 13.43 48 56 5.2 1.08 18.00 40 46

Bold = Recommended pressure

Note: The Pro-Spray PRS30’s built-in pressure regulator
controls output to a maximum of 2.1 bar; 210 kPa. Adjusting the
radius reduction screw may be required to achieve catalogue
radius and flow.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 67

 PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO ADJUSTABLE NOZZLES PERFORMANCE DATA Pro Adjustable Nozzle

17A 5.2 m radius

Adjustable from 0° to 360°
Grey Trajectory: 28°

Arc Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
1.0 100 4.6 0.10 1.68 38 43
45° 1.5 150 4.9 0.12 1.94 38 44
2.1 210 5.2 0.13 2.23 39 45
2.5 250 5.5 0.15 2.46 39 45
3.0 300 5.8 0.16 2.72 39 45
1.0 100 4.6 0.20 3.36 38 43
90° 1.5 150 4.9 0.23 3.88 38 44
NOZZLES

2.1 210 5.2 0.27 4.45 39 45

2.5 250 5.5 0.30 4.92 39 45
3.0 300 5.8 0.33 5.44 39 45
1.0 100 4.6 0.27 4.48 38 43
120° 1.5 150 4.9 0.31 5.17 38 44
2.1 210 5.2 0.36 5.94 39 45
2.5 250 5.5 0.39 6.56 39 45
3.0 300 5.8 0.43 7.25 39 45
1.0 100 4.6 0.40 6.71 38 43
180° 1.5 150 4.9 0.47 7.75 38 44
2.1 210 5.2 0.53 8.91 39 45
2.5 250 5.5 0.59 9.83 39 45
3.0 300 5.8 0.65 10.87 39 45
1.0 100 4.6 0.54 8.95 38 43
240° 1.5 150 4.9 0.62 10.34 38 44
2.1 210 5.2 0.71 11.88 39 45
2.5 250 5.5 0.79 13.11 39 45
3.0 300 5.8 0.87 14.50 39 45
1.0 100 4.6 0.60 10.07 38 43
270° 1.5 150 4.9 0.70 11.63 38 44
2.1 210 5.2 0.80 13.36 39 45
2.5 250 5.5 0.89 14.75 39 45
3.0 300 5.8 0.98 16.31 39 45
1.0 100 4.6 0.81 13.43 38 43
360° 1.5 150 4.9 0.93 15.51 38 44
2.1 210 5.2 1.07 17.82 39 45
2.5 250 5.5 1.18 19.67 39 45
3.0 300 5.8 1.30 21.75 39 45

Bold = Recommended pressure

Note: The Pro-Spray PRS30’s built-in pressure regulator
controls output to a maximum of 2.1 bar; 210 kPa. Adjusting
the radius reduction screw may be required to achieve
catalogue radius and flow.

68 Visit hunterindustries.com
PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO-SPRAY® FIXED ARC NOZZLES

FEATURES
• Colour-coded for easy field identification
• Optimum droplet size minimises misting while maximising uniformity

OPERATING SPECIFICATIONS
• Recommended operating pressure: 2.1 bar; 210 kPa
• Specify the Pro-Spray® PRS30 pop-up for accurate pressure regulation of 2.1 bar; 210 kPa

NOZZLES
PRO-SPRAY® FIXED ARC NOZZLES

ARC 5 8 10 12 15 17

T Use 4A/6A Use 17A

Nozzle Nozzle

TT Use 4A/6A Use 8A Use 10A Use 17A

Nozzle Nozzle Nozzle Nozzle

TQ Use 4A/6A Use 8A Use 10A Use 17A

Nozzle Nozzle Nozzle Nozzle

Use 17A
F Nozzle

(5') (8') (10') (12') (15') (17')

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 69

 PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO-SPRAY® FIXED ARC NOZZLES PERFORMANCE DATA

5 1.5 m radius
Fixed: ¼, ½, Full
8 2.4 m radius
Fixed: ¼, ⅓, ½, Full
10 3.0 m radius
Fixed: ¼, ⅓, ½, Full
Blue Trajectory: 0° Brown Trajectory: 0° Red Trajectory: 15°

Arc Position Pressure Radius Flow Precip mm/hr Radius Flow Precip mm/hr Radius Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min m m3/hr l/min
1.0 100 1.1 0.02 0.30 60 69 1.7 0.04 0.62 51 59 2.4 0.07 1.08 45 52
90° Q 1.5 150 1.3 0.02 0.38 54 62 2.1 0.05 0.84 46 53 2.7 0.08 1.33 44 50
2.0 200 1.5 0.03 0.45 48 55 2.4 0.06 1.00 42 48 3.0 0.09 1.53 41 47
2.1 210 1.5 0.03 0.46 49 57 2.4 0.06 1.03 43 49 3.0 0.09 1.57 42 48
2.5 250 1.7 0.03 0.51 42 49 2.7 0.07 1.13 37 43 3.3 0.10 1.71 38 44
1.0 100 1.7 0.05 0.83 51 59 2.4 0.09 1.44 45 52
120° T 1.5 150 2.1 0.07 1.12 46 53 2.7 0.11 1.77 44 50
NOZZLES

2.0 200 Use 4A or 6A Nozzle 2.4 0.08 1.33 42 48 3.0 0.12 2.04 41 47
2.1 210 2.4 0.08 1.37 43 49 3.0 0.13 2.09 42 48
2.5 250 2.7 0.09 1.51 37 43 3.3 0.14 2.28 38 44
1.0 100 1.1 0.04 0.60 60 69 1.7 0.08 1.33 55 64 2.4 0.13 2.17 45 52
180° H 1.5 150 1.3 0.05 0.76 54 62 2.1 0.10 1.69 46 53 2.7 0.16 2.65 44 50
2.0 200 1.5 0.05 0.90 48 55 2.4 0.12 1.99 42 48 3.0 0.18 3.06 41 47
2.1 210 1.5 0.06 0.92 49 57 2.4 0.12 2.05 43 49 3.0 0.19 3.14 42 48
2.5 250 1.7 0.06 1.02 42 49 2.7 0.14 2.27 37 43 3.3 0.21 3.43 38 44
1.0 100
240° TT 1.5 150
2.0 200 Use 4A or 6A Nozzle Use 8A Nozzle Use 10A Nozzle
2.1 210
2.5 250
1.0 100
270° TQ 1.5 150
2.0 200 Use 4A or 6A Nozzle Use 8A Nozzle Use 10A Nozzle
2.1 210
2.5 250
1.0 100 1.1 0.07 1.20 60 69 1.7 0.16 2.67 55 64 2.4 0.26 4.33 45 52
360° F 1.5 150 1.3 0.09 1.52 54 62 2.1 0.20 3.37 46 53 2.7 0.32 5.31 44 50
2.0 200 1.5 0.11 1.79 48 55 2.4 0.24 3.99 42 48 3.0 0.37 6.13 41 47
2.1 210 1.5 0.11 1.85 49 57 2.4 0.25 4.10 43 49 3.0 0.38 6.28 42 48
2.5 250 1.7 0.12 2.04 42 49 2.7 0.27 4.54 37 43 3.3 0.41 6.85 38 44

Bold = Recommended pressure

70 Visit hunterindustries.com
PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

PRO-SPRAY® FIXED ARC NOZZLES PERFORMANCE DATA

12 3.7 m radius
Fixed: ¼, ⅓, ½, ⅔, ¾, Full
15 4.6 m radius
Fixed: ¼, ⅓, ½, ⅔, ¾, Full
17 5.2 m radius
Fixed: ¼, ½
Green Trajectory: 28° Black Trajectory: 28° Grey Trajectory: 28°

Arc Position Pressure Radius Flow Precip mm/hr Radius Flow Precip mm/hr Radius Flow Precip mm/hr
bar kPa m m3/hr l/min m m3/hr l/min m m3/hr l/min
1.0 100 3.0 0.10 1.58 42 49 3.9 0.15 2.50 39 46 4.7 0.19 3.17 34 40
90° Q 1.5 150 3.4 0.12 2.00 42 48 4.2 0.18 3.06 42 48 4.9 0.23 3.88 39 45
2.0 200 3.7 0.14 2.37 41 48 4.6 0.21 3.54 40 46 5.2 0.27 4.48 40 46
2.1 210 3.7 0.15 2.43 43 49 4.6 0.22 3.62 41 47 5.2 0.28 4.59 41 47
2.5 250 4.0 0.16 2.69 40 47 4.9 0.24 3.95 40 46 5.5 0.30 5.01 40 46
1.0 100 3.0 0.13 2.11 42 49 3.9 0.20 3.33 39 46
120° T 1.5 150 3.4 0.16 2.67 42 48 4.2 0.24 4.08 42 48

NOZZLES
2.0 200 3.7 0.19 3.16 41 48 4.6 0.28 4.71 40 46 Use 17A Nozzle
2.1 210 3.7 0.19 3.25 43 49 4.6 0.29 4.83 41 47
2.5 250 4.0 0.22 3.59 40 47 4.9 0.32 5.27 40 46
1.0 100 3.0 0.19 3.17 42 49 3.9 0.30 5.00 39 46 4.7 0.38 6.33 34 40
180° H 1.5 150 3.4 0.24 4.01 42 48 4.2 0.37 6.12 42 48 4.9 0.47 7.76 39 45
2.0 200 3.7 0.28 4.73 41 48 4.6 0.42 7.07 40 46 5.2 0.54 8.96 40 46
2.1 210 3.7 0.29 4.87 43 49 4.6 0.43 7.25 41 47 5.2 0.55 9.18 41 47
2.5 250 4.0 0.32 5.39 40 47 4.9 0.47 7.91 40 46 5.5 0.60 10.01 40 46
1.0 100 3.0 0.25 4.22 42 49 3.9 0.40 6.67 39 46
240° TT 1.5 150 3.4 0.32 5.34 42 48 4.2 0.49 8.16 42 48
2.0 200 3.7 0.38 6.31 41 48 4.6 0.57 9.43 40 46 Use 17A Nozzle
2.1 210 3.7 0.39 6.49 43 49 4.6 0.58 9.66 41 47
2.5 250 4.0 0.43 7.18 40 47 4.9 0.63 10.54 40 46
1.0 100 3.0 0.29 4.75 42 49 3.9 0.45 7.50 39 46
270° TQ 1.5 150 3.4 0.36 6.01 42 48 4.2 0.55 9.19 42 48
2.0 200 3.7 0.43 7.10 41 48 4.6 0.64 10.61 40 46 Use 17A Nozzle
2.1 210 3.7 0.44 7.30 43 49 4.6 0.65 10.87 41 47
2.5 250 4.0 0.48 8.08 40 47 4.9 0.71 11.86 40 46
1.0 100 3.0 0.38 6.33 42 49 3.9 0.60 10.00 39 46
360° F 1.5 150 3.4 0.48 8.01 42 48 4.2 0.73 12.25 42 48
2.0 200 3.7 0.57 9.47 41 48 4.6 0.85 14.14 40 46 Use 17A Nozzle
2.1 210 3.7 0.58 9.74 43 49 4.6 0.87 14.49 41 47
2.5 250 4.0 0.65 10.78 40 47 4.9 0.95 15.81 40 46

Bold = Recommended pressure

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 71

 PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

SHORT RADIUS NOZZLES

FEATURES
• Specifically designed for controlled irrigation of close-in spaces
• Built to last in harsh conditions
• Available in 0.6 m, 1.2 m and 1.8 m radius versions
NOZZLES

SHORT RADIUS NOZZLES PERFORMANCE DATA

Nozzle Lt. Brown

Arc Pressure Position Radius Flow Precip mm/hr
bar kPa m m3/hr l/min
1.0 100 0.6 0.01 0.23 153 177 2Q Nozzle 2H Nozzle
90° 1.5 150 2Q 0.6 0.02 0.28 188 217 Radius: 0.6 m Radius: 0.6 m
2.0 200 0.6 0.02 0.33 217 250
2.1 210 0.6 0.02 0.33 222 257
2.5 250 0.6 0.02 0.36 242 280
1.0 100 0.6 0.03 0.46 153 177
180° 1.5 150 2H 0.6 0.03 0.56 188 217
2.0 200 0.6 0.04 0.65 217 250
2.1 210 0.6 0.04 0.67 222 257
2.5 250 0.6 0.04 0.73 242 280

Nozzle Lt. Green 4Q Nozzle 4H Nozzle

Arc Pressure Position Radius Flow Precip mm/hr Radius: 1.2 m Radius: 1.2 m
bar kPa m m3/hr l/min
1.0 100 1.2 0.04 0.69 115 133
90° 1.5 150 4Q 1.2 0.05 0.77 128 147
2.0 200 1.2 0.05 0.82 137 158
2.1 210 1.2 0.05 0.84 139 160
2.5 250 1.2 0.05 0.87 145 168
1.0 100 1.2 0.08 1.39 115 133
180° 1.5 150 4H 1.2 0.09 1.54 128 147
2.0 200 1.2 0.10 1.65 137 158
2.1 210 1.2 0.10 1.67 139 160 6Q Nozzle 6H Nozzle
Radius: 1.8 m Radius: 1.8 m
2.5 250 1.2 0.10 1.74 145 168

Nozzle Lt. Blue

Arc Pressure Position Radius Flow Precip mm/hr
bar kPa m m3/hr l/min
1.0 100 1.8 0.11 1.84 136 157
90° 1.5 150 6Q 1.8 0.11 1.93 143 165
2.0 200 1.8 0.12 2.00 148 171
2.1 210 1.8 0.12 2.01 149 172
2.5 250 1.8 0.22 2.06 152 176
1.0 100 1.8 0.22 3.67 136 157
180° 1.5 150 6H 1.8 0.22 3.86 143 165
2.0 200 1.8 0.22 4.00 148 171
2.1 210 1.8 0.22 4.03 149 172
2.5 250 1.8 0.23 4.12 152 176

Bold = Recommended pressure

72 Visit hunterindustries.com
PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

STRIP PATTERN NOZZLES

FEATURES
• Specifically designed for accurate coverage of strip areas
• Available in an array of models built to water unique spaces
• Built to last in harsh conditions

STRIP PATTERN NOZZLE

NOZZLES
PERFORMANCE DATA
Arc Pressure Width x Length Flow
bar kPa m m3/hr l/min
1.0 100 1.2 x 4.2 0.10 1.7
1.5 150 1.2 x 4.3 0.13 2.1 Left Corner Strip Right Corner Strip
LCS-515 Rectangle: 1.5 m x 4.5 m Rectangle: 1.5 m x 4.5 m
2.0 200 1.5 x 4.5 0.15 2.4
2.1 210 1.5 x 4.5 0.15 2.5
2.5 250 1.5 x 4.5 0.16 2.7
1.0 100 1.2 x 4.2 0.10 1.7
1.5 150 1.2 x 4.3 0.13 2.1
RCS-515
2.0 200 1.5 x 4.5 0.15 2.4
2.1 210 1.5 x 4.5 0.15 2.5
2.5 250 1.5 x 4.5 0.16 2.7
1.0 100 1.2 x 8.5 0.21 3.5
1.5 150 1.5 x 9.0 0.25 4.2
SS-530
2.0 200 1.5 x 9.0 0.29 4.9 Side Strip Side Strip
2.1 210 1.5 x 9.0 0.30 5.0 Rectangle: 1.5 m x 9.0 m Rectangle: 2.7 m x 5.5 m
2.5 250 1.5 x 9.0 0.33 5.5
1.0 100 1.1 x 4.2 0.10 1.7
1.5 150 1.2 x 4.3 0.13 2.1
ES-515
2.0 200 1.5 x 4.5 0.15 2.4
2.1 210 1.5 x 4.5 0.15 2.5
2.5 250 1.5 x 4.5 0.16 2.7
1.0 100 1.2 x 8.5 0.21 3.5
1.5 150 1.5 x 9.0 0.25 4.2
CS-530
2.0 200 1.5 x 9.0 0.29 4.9
2.1 210 1.5 x 9.0 0.30 5.0
2.5 250 1.5 x 9.0 0.33 5.5 Center Strip End Strip
1.0 100 2.4 x 5.2 0.27 4.5 Rectangle: 1.5 m x 9.0 m Rectangle: 1.5 m x 4.5 m
1.5 150 2.7 x 5.5 0.33 5.5
SS-918
2.0 200 2.7 x 5.5 0.38 6.4
2.1 210 2.7 x 5.5 0.39 6.5
2.5 250 2.7 x 5.5 0.43 7.1

Bold = Recommended pressure

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 73

 PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS

STREAM NOZZLES
FEATURES
• Adjustable Arc from 25°-360°
• Offered in 2 adjustable radius options
• Lower application rate to avoid runoff
• Multiple streams provide even coverage

MODEL S-8A STREAM SPRAY NOZZLE

STREAM NOZZLES
PERFORMANCE DATA
Arc Pressure Radius Flow Precip mm/hr
NOZZLES

bar kPa m m3/hr l/min

1.0 100 2.1 0.05 0.9 52 60
90° 1.5 150 2.2 0.07 1.1 55 64
2.0 200 2.4 0.08 1.4 57 66
2.1 210 2.4 0.09 1.4 57 66
2.5 250 2.6 0.10 1.6 58 67
1.0 100 2.1 0.12 1.9 55 63 S-8A
180° 1.5 150 2.2 0.13 2.1 51 58 Radius: 2.1 m to 2.6 m
2.0 200 2.4 0.14 2.3 47 54
2.1 210 2.4 0.14 2.3 46 53
2.5 250 2.6 0.15 2.4 44 50
1.0 100 2.1 0.24 4.0 56 65
360° 1.5 150 2.2 0.25 4.2 50 58
2.0 200 2.4 0.26 4.4 45 52
2.1 210 2.4 0.26 4.4 44 51
2.5 250 2.6 0.27 4.6 41 47

Bold = Recommended pressure S-16A

Radius: 4.3 m to 5.3 m

MODEL S-16A STREAM SPRAY NOZZLE

S-8A
PERFORMANCE DATA
Arc Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min
1.0 100 4.3 0.08 1.4 18 21
90° 1.5 150 4.6 0.10 1.6 18 21
2.0 200 5.0 0.11 1.9 18 21
2.1 210 5.0 0.11 1.9 18 21
2.5 250 5.3 0.13 2.1 18 21
1.0 100 4.3 0.14 2.3 14 17
180° 1.5 150 4.6 0.17 2.8 15 18
2.0 200 5.0 0.20 3.3 16 18
2.1 210 5.0 0.20 3.4 16 19
2.5 250 5.3 0.23 3.8 16 19
1.0 100 4.3 0.23 3.9 12 14
360° 1.5 150 4.6 0.30 5.0 14 16
2.0 200 5.0 0.36 6.1 15 17
2.1 210 5.0 0.38 6.3 15 17
2.5 250 5.3 0.43 7.2 16 18

Bold = Recommended pressure

74 Visit hunterindustries.com
 PCB PERFORMANCE DATA
PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS
Model Flow Pattern
m /hr l/min
3
Type
25 0.06 0.9 Trickle

BUBBLER NOZZLES50
10
20
0.11
0.23
0.45
1.9
3.8
7.6
Trickle
Umbrella
Umbrella

Notes:
Typical spacing 0.6 to 1.2 m. Flows shown for
pressures between 1.0 and 4.8 bar; 100 and 480 kPa.
FEATURES
• Pressure compensation ensures uniform output across various pressures
• Provides the correct amount of water, reducing runoff or waste
• Nozzle threaded for use with Pro-Spray®

MULTI-STREAM BUBBLER
Multi-Stream Bubbler MULTI-STREAM BUBBLER NOZZLES
PERFORMANCE DATA
Arc Model Flow Radius

NOZZLES
m3/hr l/min m
MSBN-25Q 0.06 0.9 0.30
MSBN-50Q 0.11 1.9 0.46
MSBN-50H 0.11 1.9 0.30
MSBN-10H 0.23 3.8 0.46
MSBN-25Q MSBN-50Q/50H
MSBN-10F 0.23 3.8 0.30
Flow: 0.06 m3/hr; Flow: 0.11 m3/hr;
MSBN-20F 0.45 7.6 0.46 0.9 l/min 1.9 l/min

Notes:
Typical spacing 0.6 to 1.2 m. Flows shown for
pressures between 1.0 and 4.8 bar; 100 and 480 kPa.

MSBN-10H/10F MSBN-20F
Flow: 0.23 m3/hr; Flow: 0.45 m3/hr;
3.8 l/min 7.6 l/min

PCN PERFORMANCE DATA PCN AFB PERFORMANCE DATA PRESSURE COMPENSATING

BUBBLER NOZZLES
Model Flow Pattern Model Flow Pattern
m3/hr l/min Type m3/hr l/min Type
25 0.06 0.9 Trickle
Trickle/
50 0.11 1.9 Trickle AFB < 0.45 < 0.76
Umbrella
10 0.23 3.8 Umbrella
20 0.46 7.6 Umbrella

Notes: PCN-25 PCN-50

Typical spacing 0.3 to 0.9 m. Flows shown for Flow: 0.06 m3/hr; Flow: 0.11 m3/hr;
pressures between 1.0 and 4.8 bar; 100 and 480 kPa. 0.9 l/min 1.9 l/min

PCB PERFORMANCE DATA

Model Flow Pattern

m3/hr l/min Type PCN-10 PCN-20
Flow: 0.23 m3/hr; Flow: 0.46 m3/hr;
25 0.06 0.9 Trickle
3.8 l/min 7.6 l/min
50 0.11 1.9 Trickle
10 0.23 3.8 Umbrella
20 0.45 7.6 Umbrella

Notes:
Typical spacing 0.6 to 1.2 m. Flows shown for
pressures between 1.0 and 4.8 bar; 100 and 480 kPa.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 75

 PRO ADJUSTABLE NOZZLES PRO-SPRAY® FIXED ARC NOZZLES SPECIALTY NOZZLES BUBBLERS
PCN PERFORMANCE DATA AFB PERFORMANCE DATA

Model Flow Pattern Model Flow Pattern

BUBBLERS
m3/hr l/min Type m3/hr l/min Type
25 0.06 0.9 Trickle
Trickle/
50 0.11 1.9 Trickle AFB < 0.45 < 0.76
Umbrella
10 0.23 3.8 Umbrella
20 0.46 7.6 Umbrella

Notes:
FEATURES
Typical spacing 0.3 to 0.9 m. Flows shown for
• pressures
Pressure compensation
between ensures
1.0 and 4.8 bar; uniform
100 and 480 kPa.output across various pressures
• ½" inlet
• Flow marked top for easy identification

PCB PERFORMANCE DATA PCB PRESSURE COMPENSATING BUBBLERS

Model Flow Pattern
NOZZLES

m3/hr l/min Type

25 0.06 0.9 Trickle
50 0.11 1.9 Trickle
10 0.23 3.8 Umbrella
20 0.45 7.6 Umbrella

Notes: PCB PCB-R

Typical spacing 0.6 to 1.2 m. Flows shown for
pressures between 1.0 and 4.8 bar; 100 and 480 kPa.

AFB PERFORMANCE DATA AFB ADJUSTABLE FLOOD BUBBLER

n Model Flow Pattern
m3/hr l/min Type
MULTI-STREAM BUBBLER
PERFORMANCE DATA Trickle/
AFB < 0.45 < 0.76
Arc Model Flow Umbrella
Radius
a
m3/hr l/min m
a
MSBN-25Q 0.06 0.9 0.30
MSBN-50Q 0.11 1.9 0.46
MSBN-50H 0.11 1.9 0.30 AFB
MSBN-10H 0.23 3.8 0.46
MSBN-10F 0.23 3.8 0.30
5-CST-B BUBBLER NOZZLE
MSBN-20F 0.45 7.6 0.46
PERFORMANCE DATA 5-CST-B DUAL-STREAM BUBBLER NOZZLE
Notes: Pressure Radius Flow
Typical spacing
bar 0.6 to
kPa1.2 m. Flows
m shownm3/hrforl/min
pressures between 1.0 and 4.8 bar; 100 and 480 kPa.
1.0 100 1.5 0.07 1.1
1.5 150 1.5 0.07 1.2
2.0 200 1.5 0.09 1.4
2.1 210 1.5 0.09 1.5
2.5 250 1.5 0.10 1.6

5-CST-B

76 Visit hunterindustries.com
 NOZZLES
HUNTER SPRAY NOZZLES
Built to Take Care of Business
SPRAY BODIES: SPRAY NOZZLES:
Always Perform Under Pressure We’ve Got You Covered
With an industry-leading 41 bar; 410 kPa burst The industry’s strongest edges and uniform
pressure, the Pro-Spray® is built to perform in the coverage at full radius means no section of
most demanding irrigation systems in the world. landscape is missed.

Innovative Seal Design Thick Droplets Get the Job Done Right
Most spray bodies leak when the cap is loosened Pro-Sprays disperse the largest water
only a quarter turn. The Pro-Spray can handle droplets of any spray nozzle on the market,
over one full turn of the cap with no leak so water is not deflected by wind or held
or loss of performance. back by thick turf.

77
 78
VALVES
 VALVES
SECTION 04:
VALVES

79
 VALVES
ADVANCED FEATURES
PRESSURE REGULATION
FLOW CONTROL RECLAIMED WATER
IDENTIFICATION
VALVES

Available on: Available on:

PGV, ICV, IBV PGV, ICV, IBV

Maximise efficiency and prolong the life of a system by fine Purple tags and handles are an option for a clear, quick, and
tuning flow and pressure for each zone. simple method of identifying the use of non-potable water.

ACCU-SYNC® PRESSURE FILTER SENTRY™

REGULATION

Available on: Available on:

PGV, ICV, IBV ICV, IBV

Avoid sprinkler over-pressure conditions and experience Filter Sentry disk scours the filter clean twice during
significant water savings with Hunterʼs Accu-Sync pressure each valve cycle. Since it is attached to the diaphragm,
regulator. This option is available in adjustable pressure the Filter Sentry feature can be easily added after a valve
or fixed pressure models. has been installed.

80
VALVES COMPARISON CHART

1" PGV & ICV FILTER IBV FILTER

QUICK SPECS JAR TOP
PGV ICV
SENTRY™ SENTRY™

SIZE 1" BSP 1½", 2" BSP 1", 1½", 2", 3" BSP 1", 1½", 2", 3" BSP 1", 1½", 2", 3" BSP

(m3/hr) 0.05–9.00 0.05–34.00 0.05–68.00 0.05–68.00 0.05–68.00

FLOW
(l/min) 0.7-150 0.7-570 0.4-1135 0.4-1135 0.4-1135

FEATURES

VALVES
CAPTIVE BONNET
⬤ ⬤ ⬤ ⬤
BOLTS

EPDM DIAPHRAGM
Standard Standard Standard
AND SEAT

WARRANTY 2 Years 2 Years 5 Years 5 Years 5 Years

ADVANCED FEATURES
FLOW CONTROL Optional ⬤ ⬤ ⬤ ⬤

FILTER SENTRY™ User Installed Factory Installed Factory Installed

ACCU-SYNC®
⬤ ⬤ ⬤ ⬤ ⬤
CAPABLE

RECLAIMED
User Installed User Installed User Installed Factory Installed
WATER ID HANDLE

RECLAIMED
User Installed Factory Installed Factory Installed
WATER ID TAG

APPLICATIONS
RESIDENTIAL ⬤ ⬤ ⬤

COMMERCIAL ⬤ ⬤ ⬤ ⬤

POTABLE WATER ⬤ ⬤ ⬤ ⬤ ⬤

RECLAIMED WATER ⬤ ⬤ ⬤

SECONDARY WATER ⬤ ⬤
PRESSURE
⬤ ⬤ ⬤ ⬤ ⬤
REGULATION
HIGH PRESSURE
⬤ ⬤ ⬤
SYSTEMS
LOW PRESSURE
⬤ ⬤ ⬤ ⬤ ⬤
SYSTEMS
HIGH TEMPERATURE
⬤ ⬤ ⬤
LOCATIONS

81
 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

1" PGV & PGV JAR TOP

Inlet: 1" (25 mm)
Flow: 0.05 to 9 m³/hr; 0.7 to 150 l/min

FEATURES
• Size: 1" (25 mm)
• External and internal manual bleed allows quick and easy
“at the valve” activation
• Double-beaded diaphragm seal design for superior leak-free
performance
• Durable glass-filled nylon threaded bonnet ring allows easy
access without tools (Jar Top)
• Optional: DC latching solenoids enable Hunter’s
battery-powered controllers
• Captive bonnet bolts provide hassle-free valve maintenance
• Low flow capability allows use of Hunter’s micro-irrigation products
PGV-100G PGV-101G
• Encapsulated 24 VAC solenoid with captive plunger for Inlet Diameter: 1" (25 mm) Inlet Diameter: 1" (25 mm)
hassle-free service
VALVES

Height: 13 cm Height: 13 cm
• Temperature rating: 66° C Length: 11 cm Length: 11 cm
Width: 6 cm Width: 6 cm
• Warranty period: 2 years
►► Flow control
►► Accu-Sync® pressure regulation
►► Optional reclaimed water ID

OPERATING SPECIFICATIONS
• Flow: 0.05 to 9 m3/hr; 0.7 to 150 l/min
• Recommended pressure range: 1.5 to 10 bar; 150 to 1,000 kPa

SOLENOID SPECIFICATIONS
• 24 VAC solenoid
-- 350 mA inrush, 190 mA holding, 60 Hz PGV-100JT - G PGV-101JT - G
Inlet Diameter: 1" (25 mm) Inlet Diameter: 1" (25 mm)
-- 370 mA inrush, 210 mA holding, 50 Hz Height: 14 cm Height: 14 cm
Length: 11 cm Length: 11 cm
Width: 8 cm Width: 8 cm
FACTORY INSTALLED OPTIONS
• Valve without solenoid
• DC latching solenoid
PGV Jar Top
USER INSTALLED OPTIONS
• Solenoid conduit cover (P/N 464322)
• DC latching solenoid (P/N 458200)
• Accu-Sync pressure regulator*
• Reclaimed water ID handle for PGV-101 models (P/N 269205)

► = Advanced Feature descriptions on page 80

* Accu-Sync product information on page 92

82 Visit hunterindustries.com
 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

PGV 1" – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Inlet/Outlet 3 Options (Factory Installed) 4 Options (User Installed)

PGV-100G = 1" (25 mm) Globe (blank) = NPT threads (blank) = No Option (blank) = No option
valve, without flow control
PGV-101G = 1" (25 mm) Globe B = BSP threads DC = DC latching solenoid
R = Reclaimed water ID handle
valve, with flow control
LS = Valve without solenoid (Except for PGV-100)
PGV-100A = 1" (25 mm) Angle
valve, without flow control CC = Solenoid conduit cover
PGV-101A = 1" (25 mm) Angle DC = DC latching solenoid
valve, with flow control
PGV-100 = 1" (25 mm) Globe
URE LOSS IN BAR MM = Male x male (NPT) AS-ADJ = Accu-Sync® adjustable pressure regulator
valve, without flow control
1" PGV-101 = 1" (25 mm) Globe MMB = Male x male (BSP) AS-xx* = Accu-Sync pressure regulator
Globe valve, with flow control 20 * = 1.4 bar, 30 * = 2.1 bar, 40 * = 2.8 bar
0.1 50 * = 3.5 bar, 70 * = 4.8 bar
0.1
0.1

VALVES
0.1
0.2 Example:
0.3 PGV-101G - B - DC = 1" (25 mm) Globe valve, with flow control, BSP threads, and DC latching solenoid
0.4
0.8
1.0
PGV JAR TOP – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Inlet/Outlet 3 Options (Factory Installed) 4 Options (User Installed)

PGV 1.5" & 2" – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4
PGV-100JT = 1" (25 mm) Globe GB = BSP threads (blank) = No option (blank) = No option
1jar top
Model
valve, without flow control 2 Inlet/Outlet 3 Options (Factory Installed) 4 Options (User Installed)
OSS IN BAR MM = Male x male (NPT) LS = Less solenoid R = Reclaimed water ID handle
(blank) = NPT threads (blank) = No (Except
Option for PGV-100JT)
1" 1" PGV-151 = 1½" (40 mm) Globe/angle
PGV-101JT = 1" (25 mm) Globe valve, with fl ow control
MMB = Male x male (BSP) DC = DC latching solenoid (blank) = No option
B = BSP threads DC = DC latching solenoid
Globe Anglejar
PGV-201 = 2"with
top valve, (50 mm) Globe/angle valve, with flow control
flow control R = Reclaimed water ID handle
CC = Solenoid conduit cover
0.1 0.1 LS = Valve w/o solenoid CC = Solenoid conduit cover
0.1 0.1 DC = DC latching solenoid
DC = DC latching solenoid
0.1 0.1 AS-ADJ = Accu-Sync adjustable
AS-ADJ = Accu-Sync®
0.2 0.1 pressure regulator adjustable pressure regulator
0.2 0.1
0.4 0.2 AS-xx* = Accu-Sync pressureAS-xx*regulator
= Accu-Sync pressure
20 * = 1.4 bar, 30 * = 2.1 regulator
bar, 40 * = 2.8 bar
50 * = 3.5 bar, 70 * = 4.820bar
* = 1.4 bar, 30 * = 2.1 bar
40 * = 2.8 bar, 50 * = 3.5 bar
70 * = 4.8 bar
Examples:
PGV-100JT - GB = 1" (25 mm) Globe jar top valve, without flow control, and BSP threads
Examples:
PGV-100JT - MMB = 1" (25 mm) Globe jar top valve, without flow control, and male BSP threads
PGV-151 - B - AS-ADJ = 1½" (40 mm) Globe valve, with flow control, BSP threads, and Accu-Sync adjustable pressure regulator

PGV PRESSURE LOSS PGV PRESSURE LOSS PGV-100-G Installed

IN BAR IN kPa
Flow 1" Flow 1"
m3/hr
PGV l/min
– SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4
0.3 0.1 4 8.2
1 Model
1.0 0.1 20 9.7 2 Inlet/Outlet 3 Options (Factory Installed) 4 Options (User Installed)
2.5
PGV-100G 0.1 Globe valve, without
= 1" (25 mm) 40 13
flow control (blank) = NPT threads (blank) = No Option (blank) = No option
3.5 0.1 55 11
PGV-101G = 1" (25 mm) Globe valve, with flow control S = slip x slip DC = DC latching solenoid R = Reclaimed water ID handle
4.5 0.2 75 22
(Excludes PGV-151 and (Except for PGV-100)
PGV-100A
5.5 = 1" (25 mm)
0.3 Angle valve, without
95 flow control
31 LS = Valve without solenoid
PGV-201)
6.5 0.4 115
PGV-101A = 1" (25 mm) Angle valve, with flow control 62 CC = Solenoid conduit cover
8.0 0.8 135 112
PGV-151 = 1½" (40 mm) Globe/angle valve, with flow control B = BSP threads DC = DC latching solenoid
9.0 1.0 150 139
PGV-201 = 2" (50 mm) Globe/angle valve, with flow control AS-ADJ = Accu-Sync
adjustable pressure regulator
PGV-100 = 1" (25 mm) Globe valve, without flow control MM = Male x male (NPT)
PGV-101 = 1" (25 mm) Globe valve, with flow control MMB = Male x male (BSP) AS-xx* = Accu-Sync pressure
regulator
20 * = 1.4 bar, 30 * = 2.1 bar
40 * = 2.8 bar, 50 * = 3.5 bar
70 * = 4.8 bar
Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 83
 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

PGV
Inlet: 1½" (40 mm), 2" (50 mm)
Flow: 5 to 34 m³/hr; 75 to 570 l/min

FEATURES
• Sizes: 1½" (40 mm), 2" (50 mm)
• External and internal manual bleed allows quick and easy
“at the valve” activation
• Double-beaded diaphragm seal design assures leak-free performance
• Optional: DC latching solenoids enable Hunter’s battery-powered controllers
• Captive bonnet bolts provide hassle-free valve maintenance
• Encapsulated 24 VAC solenoid with captive plunger for hassle-free service
• Temperature rating: 66° C
• Warranty period: 2 years
►► Flow control
►► Accu-Sync® pressure regulation
►► Optional reclaimed water ID handle
VALVES

PGV-151 PGV-201
Inlet Diameter: 1½" (40 mm) Inlet Diameter: 2" (50 mm)
OPERATING SPECIFICATIONS Height: 19 cm Height: 20 cm
Length: 15 cm Length: 17 cm
• Flow: Width: 11 cm Width: 13 cm
-- PGV-151: 5 to 27 m3/hr; 75 to 450 l/min
-- PGV-201: 5 to 34 m3/hr; 75 to 570 l/min
• Recommended pressure range: 1.5 to 10 bar; 150 to 1000 kPa

SOLENOID SPECIFICATIONS
• 24 VAC solenoid
-- 350 mA inrush, 190 mA holding, 60 Hz
-- 370 mA inrush, 210 mA holding, 50 Hz

FACTORY INSTALLED OPTIONS

• Valve without solenoid
• DC latching solenoid

USER INSTALLED OPTIONS

• Solenoid conduit cover (P/N 464322)
• DC latching solenoid (P/N 458200)
• Accu-Sync pressure regulator
• Reclaimed water ID (P/N 607105)

► = Advanced Feature descriptions on page 80

84 Visit hunterindustries.com
 Example:
1"PGV-101G
PGV & PGV
- B -JAR
DC =TOP PGV
1" (25 mm) valve,
Globe ICV withIBV QUICK
flow control, COUPLERS
BSP threads, and DCACCU-SYNC®
latching solenoid

PGV 1.5" & 2" – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Inlet/Outlet 3 Options (Factory Installed) 4 Options (User Installed)

(blank) = NPT threads (blank) = No Option

PGV-151 = 1½" (40 mm) Globe/angle valve, with flow control (blank) = No option
B = BSP threads DC = DC latching solenoid
PGV-201 = 2" (50 mm) Globe/angle valve, with flow control R = Reclaimed water ID handle
LS = Valve w/o solenoid CC = Solenoid conduit cover
DC = DC latching solenoid
AS-ADJ = Accu-Sync®
adjustable pressure regulator

AS-xx* = Accu-Sync pressure

regulator
20 * = 1.4 bar, 30 * = 2.1 bar
40 * = 2.8 bar, 50 * = 3.5 bar
70 * = 4.8 bar

Examples:
PGV-151 - B - AS-ADJ = 1½" (40 mm) Globe valve, with flow control, BSP threads, and Accu-Sync adjustable pressure regulator

VALVES
PGV PRESSURE LOSS IN kPa PGV PRESSURE LOSS IN BAR
PGV – SPECIFICATION
Flow 1" 1" BUILDER:
1½" ORDER2"
1½" 1 + 2 +2"3 + 4 Flow 1" 1" 1½" 1½" 2" 2"
l/min Globe Angle Globe Angle Globe Angle m3/hr Globe Angle Globe Angle Globe Angle
1 4 Model 8 7 2 0.3Inlet/Outlet
0.1 0.1 3 Options (Factory Installed) 4 Options (User Installed)
20 9.5 7
PGV-100G = 1" (25 mm) Globe valve, without flow control 1.0
(blank) = NPT 0.1
0.1 threads (blank) = No Option (blank) = No option
40 13 7 2.5 0.1 0.1
PGV-101G = 1" (25 mm) Globe valve, with flow control S = slip x slip DC = DC latching solenoid R = Reclaimed water ID handle
55 11 7 3.5 0.2
(Excludes PGV-151 and
0.1
PGV-100A = LS = Valve 0.2
without solenoid (Except for PGV-100)
75 221" (25 mm)
14 Angle20
valve, without
22 flow4 control 9 4.5
PGV-201) 0.2 0.1 0.2 0.1 0.1
95
PGV-101A =31 16 Angle20
1" (25 mm) 21 flow control
valve, with 5.5 9 7.0 0.4 0.2 0.2 0.2 0.1 0.1 CC = Solenoid conduit cover
115 43 21 21 21 7.5 9.5 8.0 0.2 0.2 0.1 0.1
PGV-151 = 1½" (40 mm) Globe/angle valve, with flow control B = BSP threads DC = DC latching solenoid
135 22 21 9 10 9.0 0.2 0.2 0.1 0.1
150
PGV-201 25
= 2" (50 mm) Globe/angle 23 with fl12
valve, 11
ow control 11.0 0.3 0.2 0.1 0.1 AS-ADJ = Accu-Sync
200 27 24 14 12 13.5 0.3 0.3 0.1 0.1 adjustable pressure regulator
PGV-100 = 1" (25 mm) Globe valve, without flow control MM = Male x male (NPT)
325 47 41 26 19 18.0 0.4 0.4 0.2 0.1
PGV-101
400 = 1" (25 mm) Globe valve,
65 with59 flow control
33 24 MMB
22.5 = Male x male (BSP) 0.6 0.5 0.3 0.2
AS-xx* = Accu-Sync pressure
regulator
500 96 92 43 32 27.0 0.8 0.8 0.4 0.3
20 * = 1.4 bar, 30 * = 2.1 bar
625 56 45 30.5 0.6 0.5 40 * = 2.8 bar, 50 * = 3.5 bar
775 74 64 34.0 0.7 0.6 70 * = 4.8 bar

Examples:
PGV-101G - B - DC = 1" (25 mm) Globe valve, with flow control, BSP threads, and DC latching solenoid
PGV-151 - B - AS = 1½" (40 mm) globe valve, with flow control, BSP threads, and Accu-Sync® pressure regulator

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 85

 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

Inlet: 1" (25 mm), 1½" (40 mm)

ICV 2" (50 mm), 3" (80 mm)

Flow: 0.06 to 68 m3/hr; 0.4 to 1,135 l/min

FEATURES
• Inlet: 1" (25 mm), 1½" (40 mm), 2" (50 mm), 3" (80 mm)
• External and internal manual bleed allows quick and easy
“at the valve” activation
• Glass-filled nylon construction resulting in the highest pressure rating
• Double-beaded diaphragm seal design assures leak-free performance
• Fabric-reinforced EPDM diaphragm and EPDM seat ensure greater
performance in all conditions
• Optional: DC latching solenoids enable Hunter’s battery-powered controllers
• Captive bonnet bolts provide hassle-free valve maintenance
• Low flow capability allows use of Hunter’s micro-irrigation products
• Encapsulated 24 VAC solenoid with captive plunger for hassle-free service ICV-101G ICV-151G
Inlet Diameter: 1" (25 mm) Inlet Diameter: 1½" (40 mm)
• Temperature rating: 66° C Height: 18 cm
Height: 14 cm
VALVES

• Warranty period: 5 years Length: 12 cm Length: 17 cm

►► Flow control Width: 10 cm Width: 14 cm

►► Filter Sentry™
►► Accu-Sync® pressure regulation
►► Optional reclaimed water ID

OPERATING SPECIFICATIONS
• Flow:
-- ICV-101G: 0.06 to 9 m3/hr; 0.4 to 150 l/min
-- ICV-151G: 4 to 34 m3/hr; 75 to 568 l/min
-- ICV-201G: 9 to 45 m3/hr; 150 to 757 l/min
-- ICV-301: 34 to 68 m3/hr; 570 to 1,135 l/min
• Recommended pressure range: 1.5 to 15.0 bar; 150 to 1500 kPa

SOLENOID SPECIFICATIONS ICV-201G ICV-301

Inlet Diameter: 2" (50 mm) Inlet Diameter: 3" (80 mm)
• 24 VAC solenoid Height: 18 cm Height: 27 cm
-- 350 mA inrush, 190 mA holding, 60 Hz Length: 17 cm Length: 22 cm
-- 370 mA inrush, 210 mA holding, 50 Hz Width: 14 cm Width: 19 cm

FACTORY INSTALLED OPTIONS

• DC latching solenoid
• Filter Sentry

USER INSTALLED OPTIONS

• Solenoid conduit cover (P/N 464322)
• DC latching solenoid (P/N 458200)
• Accu-Sync pressure regulator
• Reclaimed water ID handle for ICV101, 151, 201 (P/N 561205)
and 301 (P/N 515005)
• Reclaimed water ID Tag for all ICV valves (P/N 700392)
(Included on Filter Sentry Models)

► = Advanced Feature descriptions on page 80

86 Visit hunterindustries.com
1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

ICV – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

Options
1 Model 2 Inlet/Outlet 3 (Factory Installed)
4 Options (User Installed)

ICV-101G = 1" (25 mm) (blank) = NPT (blank) = No option (blank) = No option
Globe valve threads
FS = Filter Sentry™ R = Reclaimed water ID handle
ICV-151G = 1½" (40 mm) B = BSP threads DC = DC latching solenoid CC = Solenoid conduit cover
Globe valve
DC = DC latching solenoid
ICV-201G = 2" (50 mm) AS-ADJ = Accu-Sync® adjustable
Globe valve pressure regulator

ICV-301 = 3" (80 mm) AS-xx* = Accu-Sync pressure regulator

Globe/Angle valve 20 * = 1.4 bar, 30 * = 2.1 bar
40 * = 2.8 bar, 50 * = 3.5 bar
70 * = 4.8 bar

Examples:

VALVES
ICV-101G = 1" (25 mm) Globe valve, NPT threads
ICV-151G - FS - R = 1½" (40 mm) Globe valve, NPT threads, Filter Sentry, and reclaimed water ID handle
ICV-301B = 3" (80 mm) Globe/Angle valve, BSP threads

ICV PRESSURE LOSS IN BAR ICV PRESSURE LOSS IN kPa ICV PRESSURE LOSS IN BAR
Flow 1" 1½" 2" 3" 3" Flow 1" 1½" 2" 3" 3" Flow 1" 1½" 2" 3
m3/hr Globe Globe Globe Globe Angle l/min Globe Globe Globe Globe Angle m3/hr Globe Globe Globe Glo
0.05 0.1 1 14 0.05 0.1
0.1 0.1 2 14 0.1 0.1
0.3 0.1 4 14 0.3 0.1
1.0 0.2 20 17 1.0 0.2
2.5 0.2 40 20 2.5 0.2
3.5 0.2 60 20 3.5 0.2
4.5 0.2 0.1 75 20 9.6 4.5 0.2 0.1
7.0 0.4 0.1 115 62 10 7.0 0.4 0.1
9.0 1.0 0.1 0.1 150 139 12 5.0 9.0 1.0 0.1 0.1
11.0 0.2 0.1 190 15 7.0 11.0 0.2 0.1
13.5 0.2 0.1 225 18 9.3 13.5 0.2 0.1
17.0 0.3 0.1 280 26 14 17.0 0.3 0.1
20.5 0.4 0.2 340 37 20 20.5 0.4 0.2
23.0 0.5 0.3 380 46 26 23.0 0.5 0.3
27.0 0.7 0.4 450 65 36 27.0 0.7 0.4
30.5 0.9 0.5 510 84 47 30.5 0.9 0.5
34.0 1.2 0.6 0.2 0.1 565 104 57 16 12 34.0 1.2 0.6 0
40.0 0.9 0.2 0.2 660 79 22 17 40.0 0.9 0
45.5 1.2 0.3 0.2 750 103 29 23 45.5 1.2 0
51.0 0.3 0.3 850 38 30 51.0 0
57.0 0.4 0.4 950 47 38 57.0 0
62.5 0.5 0.5 1,050 58 47 62.5 0
68.0 0.6 0.6 1,135 69 56 68.0 0

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 87

 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

Inlet: 1" (25 mm), 1½" (40 mm)

IBV 2" (50 mm), 3" (80 mm)

Flow: 0.06 to 68 m3/hr; 0.4 to 1,135 l/min

FEATURES
• Factory-installed Filter Sentry™ diaphragm
• External and internal manual bleed allows quick and easy
“at the valve” activation
• Double-beaded diaphragm seal design assures leak-free performance
• Fabric-reinforced EPDM diaphragm and EPDM seat ensure superior
performance in all conditions
• Optional DC latching solenoids enable Hunter’s battery-powered controllers
• Low flow capability allows use of Hunter’s micro irrigation products
• Encapsulated 24 VAC solenoid with captive plunger for hassle-free service
• Temperature rating: 66° C
• Warranty period: 5 years IBV-101G-FS IBV-151G-FS
Inlet Diameter: 1" (25 mm) Inlet Diameter: 1½" (40 mm)
►► Heavy-duty flow control
Height: 11.5 cm Height: 16 cm
VALVES

►► Accu-Sync® pressure regulation Length: 9 cm Length: 13 cm

Width: 13 cm Width: 16 cm

OPERATING SPECIFICATIONS
• Flow rate:
-- IBV-101G-FS: 0.06 to 9 m3/hr; 0.4 to 150 l/min
-- IBV-151G-FS: 4 to 34 m3/hr; 75 to 568 l/min
-- IBV-201G-FS: 9 to 45 m3/hr; 150 to 757 l/min
-- IBV-301G-FS: 34 to 68 m3/hr; 570 to 1,135 l/min
• Recommended pressure range: 1.5 to 15 bar; 150 to 1500 kPa

SOLENOID SPECIFICATIONS
• 24 VAC solenoid
-- 350 mA inrush, 190 mA holding, 60 Hz
-- 370 mA inrush, 210 mA holding, 50 Hz IBV-201G-FS IBV-301G-FS
Inlet Diameter: 2" (50 mm) Inlet Diameter: 3" (80 mm)
Height: 15 cm Height: 24 cm
FACTORY INSTALLED OPTIONS Length: 13 cm Length: 23 cm
• DC latching solenoid Width: 17 cm Width: 18 cm

USER INSTALLED OPTIONS

• Solenoid conduit cover (P/N 464322)
• DC latching solenoid (P/N 458200)
• Accu-Sync pressure regulator
• Reclaimed water ID tag (P/N 700392)

► = Advanced Feature descriptions on page 80

88 Visit hunterindustries.com
 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

IBV – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Inlet/Outlet 3 Options (Factory Installed) 4 Options (User Installed)

IBV-101G-FS = 1" B = BSP threads (blank) = No option (blank) = No option

(25 mm) Globe valve
DC = DC latching solenoid R = Reclaimed water ID tag
IBV-151G-FS = 1½" CC = Solenoid conduit cover
(40 mm) Globe valve
DC = DC latching solenoid
IBV-201G-FS = 2" AS-ADJ = Accu-Sync® adjustable
(50 mm) Globe valve pressure regulator

IBV-301G-FS = 3" AS-xx* = Accu-Sync pressure

(80 mm) Globe/Angle regulator
valve 20 * = 1.4 bar, 30 * = 2.1 bar
40 * = 2.8 bar, 50 * = 3.5 bar
70 * = 4.8 bar

Examples:
IBV-151G - B - FS - R = 1½" (40 mm) Globe valve, BSP threads, Filter Sentry, and reclaimed water ID tag

VALVES
IBV-201G - B - FS = 2" (50 mm) Globe valve , BSP threads, Filter Sentry

IBV PRESSURE LOSS IN BAR IBV PRESSURE LOSS IN kPa IBV PRESSURE LOSS IN BAR
" Flow 1" 1½" 2" 3" Flow 1" 1½" 2" 3" Flow 1" 1½" 2" 3"
be m3/hr Globe Globe Globe Globe l/min Globe Globe Globe Globe m3/hr Globe Globe Globe Globe
0.05 0.1 0.1 14 0.05 0.1
0.1 0.1 0.5 14 0.1 0.1
0.3 0.1 4 14 0.3 0.1
1.0 0.2 20 17 1.0 0.2
2.5 0.2 40 20 2.5 0.2
3.5 0.2 60 20 3.5 0.2
4.5 0.2 0.1 75 20 9.6 4.5 0.2 0.1
7.0 0.4 0.1 115 62 10 7.0 0.4 0.1
9.0 1.0 0.1 0.1 150 139 12 5 9.0 1.0 0.1 0.1
11.0 0.2 0.1 190 15 7 11.0 0.2 0.1
13.5 0.2 0.1 225 18 9.3 13.5 0.2 0.1
17.0 0.3 0.2 280 26 14 17.0 0.3 0.2
20.5 0.4 0.2 340 37 20 20.5 0.4 0.2
23.0 0.5 0.3 380 46 26 23.0 0.5 0.3
27.0 0.7 0.4 450 65 36 27.0 0.7 0.4
30.5 0.9 0.5 510 84 47 30.5 0.9 0.5
34.0 0.6 0.2 565 57 16 34.0 0.6 0.2
2 40.0 0.2 660 22 40.0 0.2
9 45.5 0.3 750 29 45.5 0.3
8 51.0 0.3 850 38 51.0 0.3
7 57.0 0.4 950 47 57.0 0.4
8 62.5 0.5 1,050 58 62.5 0.5
9 68.0 0.6 1,135 69 68.0 0.6

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 89

 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

QUICK COUPLERS
Size: ¾" (20 mm), 1" (25 mm)
Pressure Rating: 10 bar; 1,000 kPa

FEATURES
• 100% interchangeable with major brands*
• Red brass and stainless steel construction
• TuffTop™ thermoplastic locking and non-locking covers
• Optional WingThing™ stabilisation and ACME key connection
• Stainless steel lug on 1" (25 mm) and 1¼" (32 mm) keys
• Spring-loaded covers with stainless steel springs for positive closing
and protection of valve’s sealing components
* HQ compatibility information on page 191

Quick Couplers
VALVES

HQ
HQ PRESSURE
PRESSURE LOSS
LOSS IN
IN BAR
BAR HQ
HQ PRESSURE
PRESSURE LOSS
LOSS IN
IN kPa
kPa
Flow
Flow HQ-3
HQ-3 HQ-33
HQ-33 HQ-44
HQ-44 HQ-5
HQ-5 Flow
Flow HQ-3
HQ-3 HQ-33
HQ-33 HQ-44
HQ-44 HQ-5
HQ-5
m
m33/hr
/hr l/min
l/min
11 0.06
0.06 0.07
0.07 18.9
18.9 5.5
5.5 6.9
6.9
2.3
2.3 1.12
1.12 0.14
0.14 37.9
37.9 12.4
12.4 13.8
13.8
3.4
3.4 0.28
0.28 0.30
0.30 0.15
0.15 56.8
56.8 28.3
28.3 29.6
29.6 15.2
15.2
4.5
4.5 0.50
0.50 0.52
0.52 0.30
0.30 0.07
0.07 75.7
75.7 49.6
49.6 52.4
52.4 30.3
30.3 6.9
6.9
6.8
6.8 0.79
0.79 0.21
0.21 113.6
113.6 79.3
79.3 20.7
20.7
9.1
9.1 0.43
0.43 151.4
151.4 43.4
43.4
11.4
11.4 0.63
0.63 189.3
189.3 63.4
63.4
Reclaimed Water Option
13.6
13.6 0.90
0.90 227.1
227.1 89.6
89.6
15.9
15.9 1.37
1.37 265.0
265.0 136.5
136.5 All locking models have an optional purple TuffTop™ cover
for sites using reclaimed water.

QUICK COUPLER, KEY AND HOSE SWIVEL CHARTS

Model Inlet Threads Slots Body Colour* Locking Key Swivels
HQ-3RC ¾" 2 1 - Piece Yellow No HK-33 HS-0
HQ-33DRC ¾" 2 2 - Piece Yellow No HK-33 HS-0
HQ-33DLRC ¾" 2 2 - Piece Yellow Yes HK-33 HS-0
HQ-44RC 1" (25 mm) NPT 1 2 - Piece Yellow No HK-44 HS-1 or HS-2
HQ-44LRC 1" (25 mm) NPT 1 2 - Piece Yellow Yes HK-44 HS-1 or HS-2
HQ-44RC-AW 1" (25 mm) NPT ACME 2 - Piece Wing** Yellow No HK-44A HS-1 or HS-2
HQ-44LRC-AW 1" (25 mm) NPT ACME 2 - Piece Wing** Yellow Yes HK-44A HS-1 or HS-2
HQ-5RC 1" (25 mm) NPT 2 1 - Piece Yellow No HK-55 HS-1 or HS-2
HQ-5LRC 1" (25 mm) NPT 2 1 - Piece Yellow Yes HK-55 HS-1 or HS-2

Notes:
* All locking cover models are available with purple covers for reclaimed water applications
** Anti-rotation stabilisation wings

90 Visit hunterindustries.com
1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

HQ QUICK COUPLER – SPECIFICATION BUILDER: ORDER 1 + 2 + 3

1 Model 2 Cover Options 3 Additional Options

HQ3 = ¾" Inlet, 1-piece body, 2 slots RC = Yellow rubber cover (blank) = No option
HQ5 = 1" (25 mm) Inlet, 1-piece body, 2 slots LRC = Yellow locking rubber cover AW = ACME key with anti-rotation wings
(Not available for HQ3 body) (Only available for HQ44 body)
HQ33D = ¾" Inlet, 2-piece body, 2 slots
HQ44 = 1" (25 mm) Inlet, 2-piece body, 1 slot or ACME BSP = BSP threads
(Only available for HQ5 body)

R = Purple locking cover

(reclaimed water ID; only available)
for LRC models)

Examples:
HQ3 - RC = HQ3 valve with rubber cover
HQ44 - LRC = HQ44 valve with locking rubber cover
HQ44 - LRC - R = HQ44 valve with locking rubber cover and purple locking cover
HQ44 - LRC - AW - R = HQ valve, with locking rubber cover, ACME key socket, anti-rotation wings and purple locking cover
HQ5 - LRC - BSP = HQ5 valve with locking rubber cover and BSP threads

VALVES
HK KEYS
Key Model Compatible Valve Compatible Swivel
HK33 = ¾" valve, ¾" key inlet HQ3, HQ33 HS0
HK44 = 1" (25 mm) valve, 1" (25 mm) key inlet HQ44 HS1, HS2, HS1B, HS2B
HK44A = 1" (25 mm) valve, ACME key inlet HQ44AW HS1, HS2, HS1B, HS2B
HK55 = 1" (25 mm) valve, 1¼" (32 mm) key inlet HQ5 HS1, HS2, HS1B, HS2B

HS HOSE SWIVELS
Hose Swivel Compatible Key
HS0 = ¾" inlet, ¾" hose outlet HK33
HS1 = 1" (25 mm) inlet, ¾" hose outlet HK44, HK44A, HK55
HS2 = 1" (25 mm) inlet, 1" (25 mm) hose outlet HK44, HK44A, HK55
HS1B = 1" (25 mm) inlet, ¾" BSP outlet HK44, HK44A, HK55
HS2B = 1" (25 mm) inlet, 1" (25 mm) BSP outlet HK44, HK44A, HK55

① ① HQ5LRC Quick Coupler with HSJ-1 SnapLok™ equipped swing joint

Introducing Hunter’s new full line of HSJ heavy-duty swing joints

with configurations for every need and every project. There is even
a version specifically designed for quick coupler applications. The
SnapLok outlet on HSJ-1 models is equipped with accommodations
for both rebar and pipe stabilisation, as well as heavy-duty brass
outlet threads with a unique anti-rotation locking feature.

See the new HSJ swing joints on page 173

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 91

 1" PGV & PGV JAR TOP PGV ICV IBV QUICK COUPLERS ACCU-SYNC®

ACCU-SYNC® Type: Pressure Regulator

OPERATING SPECIFICATIONS
• Regulation from 1.5 to 7.0 bar; 150 to 700 kPa ADJUSTABLE FIXED
• Static pressure: 10 bar; 1,000 kPa
• Required dynamic pressure differential: 1.0 bar; 100 kPa
• Works with AC and DC latching solenoids
• Works with any Hunter valve

ACCU-SYNC VALVE AS-ADJ AS-20

RECOMMENDED FLOW RANGE Height with solenoid: 8 cm Height with solenoid: 8 cm
Valve Flow
l/min m3/hr
VALVES

PGV-100/101 19 - 114 1.2 - 6.8

PGV-151 75 - 454 4.5 - 28
PGV-201 150 - 750 9.0 - 34
ICV-101 19 - 150 1.2 - 9.0
ICV-151 75 - 510 4.5 - 31
ICV-201 150 - 560 9.0 - 34
ICV-301 565 - 1135 34 - 68
IBV-101 19 - 150 1.2 - 9.0
AS-30 AS-40
IBV-151 75 - 510 4.5 - 31
Height with solenoid: 8 cm Height with solenoid: 8 cm
IBV-201 150 - 560 9.0 - 46
IBV-301 565 - 1135 34 - 68

ACCU-SYNC APPLICATIONS AS-50 AS-70

Height with solenoid: 8 cm Height with solenoid: 8 cm
For full customisation, the adjustable Accu-Sync can
Adjustable 1.5 to 7 bar
regulate pressure from 1.5 to 7.0 bar; 150 to 700 kPa
Ideal for point source micro irrigation systems, pressure regulated
Fixed 1.5 bar
to 1.5 bar; 150 kPa
Fixed 2.0 bar Ideal for spray systems, pressure regulated to 2.0 bar; 200 kPa
Ideal for Hunter’s MP Rotator and large in-line drip systems,
Fixed 3.0 bar
pressure regulated to 3.0 bar; 300 kPa
Fixed 3.5 bar Ideal for mid-range rotors, pressure regulated to 3.5 bar; 350 kPa
Fixed 5.0 bar Ideal for larger rotors, pressure regulated to 5.0 bar; 500 kPa

Installation
Accu-Sync shown installed on ICV and PGV valves.

92 Visit hunterindustries.com
 VALVES
HUNTER VALVES
Built to Thrive Under Pressure
From residential to commercial, high pressure to low pressure, clean water to dirty water, Hunter valves
keep your system running flawlessly day in and day out.

RELIABLE: SIMPLE PRESSURE REGULATION:

• Fewer parts means greater longevity and simple operation • Regulating at the valve greatly enhances efficiency
• AC and DC models for flexibility • Accu-Sync® provides simple regulation from 1.5 to 7.0 bar;
• Residential models handle up to 10 bar; 1,000 kPa 150 to 700 kPa
• Commercial models handle up to 15 bar; 1,500 kPa

93
 SECTION 05:

CONTROLLERS
CONTROLLERS

94
ADVANCED
FEATURES
SIMPLE OPERATION & SMART COMPATIBILITY

SOLAR SYNC® DIAL POSITION

The Pro-C® facepack has Solar Sync control built-in, making it even easier
to upgrade any Pro-C to weather-based smart control. Solar Sync is an

CONTROLLERS
EPA WaterSense® Approved smart device which calculates evapotranspiration
(ET) and adjusts Hunter controllers daily based on local weather conditions,
resulting in water savings and conservation.

QUICKCHECK™

The QuickCheck feature makes field wiring issues easy to assess with the push
of a button. QuickCheck displays an ERR message when a field wiring short
is detected on a particular station number.

AUTOMATIC SHORT CIRCUIT PROTECTION

Automatic short circuit protection is a feature found in all Hunter AC

powered controllers. This feature automatically detects electrical faults,
which are typically caused by wiring issues. Only affected stations are skipped,
allowing all other stations to water normally as programmed. There are no
fuses to blow or internal circuit breakers to trip, so complete irrigation system
shutdown is avoided.

NON-WATER DAYS

Day(s) of the week can be programmed OFF in advance, so that irrigation

does not occur regardless of program interval schedules. For example,
if the gardener mows the lawn on Saturday, the Non-Water Days feature
allows Saturday to be programmed OFF, so that watering will not occur.

95
 CONTROLLERS
ADVANCED FEATURES
PROGRAMMABLE DECODERS TOTAL RUN TIME CALCULATOR
Field programmability means no lengthy serial numbers This feature adds up all run times, calculates the total
to enter in the controller, and no time lost re-programming duration of a program, and instantly displays the full length of
decoder assignments after a controller change. Each an irrigation cycle. This information can be used to determine
decoder is programmed with its actual station (valve) the time when watering will end.
numbers for simplicity and reliability. Decoders may be
re-programmed at any time if desired.

SOLAR SYNC® DELAY SEASONAL ADJUSTMENT: GLOBAL, MONTHLY,

AND SOLAR SYNC
CONTROLLERS

Solar Sync Delay allows the installer to specify a number

of days before automatic weather adjustment begins. This This feature allows for quick adjustments to irrigation run
allows a period of non-adjusted irrigation for grow-in or plant times through a percentage scale. During peak season, set
establishment purposes, without requiring a return visit to the the seasonal adjust to 100%. If weather conditions require less
site to enable the Solar Sync water-saving feature. water, enter the appropriate percentage value (i.e. 50%) to
cut down irrigation run times without the need to adjust each
station in the program.
REAL TIME FLOW MONITORING
Global: Provides a seasonal adjustment value to all programs.
This feature permits connection of a flow meter to recognise
Monthly: Allows users to program a seasonal adjustment
high or low flow conditions and react automatically to alarms.
value for each month of the year. This works by automatically
The controller learns typical flows for each zone of irrigation
changing the programmed seasonal adjustment value on the
and then monitors performance during automatic irrigation.
first day of every month.
When incorrect flows are detected, the controller can identify
the faulty station and shut it down. Flow Monitoring requires Solar Sync: The Solar Sync ET sensor implements an automatic
the installation of a Normally-Closed Master Valve for full daily adjustment based on measured local weather.
functionality. Flow totals are also recorded in controller
memory to report system water usage.

CYCLE AND SOAK DELAY BETWEEN STATIONS

This water-saving feature allows the operator to specify Users can program a delay between stations as the controller
a maximum cycle time for each single station in hours, advances from one station to the next. This delay can range
minutes, or seconds, followed by a minimum soak time, to from a few seconds (to permit slow-closing valves additional
prevent runoff from slopes or saturated soil. The operator can time to close) to a much longer period of time (to allow
enter any run time, and the controller will automatically divide pressure tanks time to recharge), based on user requirements.
it into cycles to allow the water to be absorbed during the soak
periods. The feature is adjustable by individual station for
SENSOR PROGRAMMABILITY
unique soil and site conditions.
This feature allows the user to specify which program or
SIMULTANEOUS STATION GROUPS stations will be shut down in response to a specific sensor
alarm. Stations or programs not affected by the sensor
Simultaneous Station Groups allow for groups of stations to continue to run automatically.
run together within a program. This permits consolidation of
large systems into fewer items to program and can be used to
MULTI-LANGUAGE PROGRAMMING
control system flow in high capacity installations.
Users can choose to program Hunter controllers in six
different languages including English, Spanish, French,
Italian, German and Portuguese.

96
CONTROLLERS COMPARISON CHART

QUICK SPECS ECO LOGIC X-CORE® PRO-C® PCC I-CORE® ACC XC-HYBRID NODE WVS

6 to 42 6 to 42
NUMBER OF
4, 6 2, 4, 6, 8 4 to 16 6, 12 Up to 48 with Up to 99 with 6, 12 1, 2, 4, 6 1, 2, 4
STATIONS
Decoders Decoders

TYPE* Fixed Fixed Modular Fixed Modular Modular Fixed Fixed Fixed
NUMBER OF
2 3 3 3 4 6 3 3 ---
PROGRAMS

8
START TIMES PER
4 4 4 4 (16 for 10 4 4 ---
PROGRAM
program D)

MAX. NUMBER OF
SIMULTANEOUS --- --- --- --- 2 6 --- --- ---
PROGRAMS

WARRANTY 2 Years 2 Years 2 Years 2 Years 5 Years 5 Years 2 Years 2 Years 2 Years

CONTROLLERS
FEATURES

Plastic/ Metal
Metal Outdoor
Plastic
Plastic Plastic Plastic Stainless Stainless Indoor/
Indoor Indoor Indoor Outdoor Outdoor Outdoor
Plastic
ENCLOSURE TYPE Waterproof Waterproof
Indoor
Plastic Plastic Plastic Plastic Plastic Stainless
Outdoor Outdoor Outdoor Pedestal Pedestal Indoor/
Outdoor
Stainless Stainless
Pedestal Pedestal

SOLAR SYNC®
⬤ ⬤ ⬤ ⬤ ⬤
COMPATIBLE

CENTRAL CONTROL
⬤ ⬤ ⬤ ⬤
COMPATIBLE

REMOTE CONTROL
⬤ ⬤ ⬤ ⬤ ⬤
COMPATIBLE

FLOW METER
⬤ ⬤ ⬤ ⬤
COMPATIBLE

RAIN-CLIK®
FREEZE-CLIK®
⬤ ⬤ ⬤ ⬤ ⬤ ⬤ ⬤ ⬤ ⬤
SENSOR
COMPATIBLE

BATTERY OPERATED ⬤ ⬤ ⬤

2
NUMBER OF (Plastic Models) 4 + Dedicated
1 1 1 1 1 1 1
SENSOR INPUTS 3 (Metal & Flow Input
Ped Models)

MAX. STATION RUN

4 4 6 6 12 6 4 6 4
TIMES (hours)

* Fixed or modular indicates the controllers ability to expand the number of stations from a base count.

97
 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

ECO LOGIC
Number of Stations: 4, 6
Type: Fixed

FEATURES
• Number of stations: 4, 6
• Type: Fixed
• Enclosure: Indoor
• Independent programs: 2
• Start times per program: 4
• Max station run time: 4 hours
• Compatible with Hunter Clik sensors and other
micro-switch type weather sensors
• Rain sensor bypass
• Programmable rain delay: 1 to 7 days
• Manual cycle
Plastic Indoor
• Test program allows for quick system checks Height: 12.6 cm
• Warranty period: 2 years Width: 12.6 cm
CONTROLLERS

Length: 3.2 cm
►► Easy Retrieve™ memory
►► Quick Check™
►► Solar Sync® Delay
►► Automatic short circuit protection
►► Seasonal Adjustment: Global or automatic
updates with Solar Sync
►► Delay between stations
►► Sensor programmability

ELECTRICAL SPECIFICATIONS
• Transformer input: 230 VAC 50/60 Hz
• Transformer output (24 VAC): 0.625 A
• Station output (24 VAC): 0.28 A
• P/MV output (24 VAC): 0.28 A
• Sensor input: 1

APPROVALS
• CE, cUL

ECO LOGIC

Model Description

ELC-401i - E 4-Station indoor controller, 230 VAC, with European connections

ELC-601i - E 6-Station indoor controller, 230 VAC, with European connections

98 Visit hunterindustries.com
ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

X-CORE ® Number of Stations: 2, 4, 6, 8 

Type: Fixed

FEATURES
• Number of stations: 2, 4, 6, 8
• Type: Fixed
• Enclosures: Indoor and outdoor plastic
• Independent programs: 3
• Start times per program: 4
• Max. station run time: 4 hours
• Built in Solar Sync®
• Programmable rain delay
• Non-volatile memory
• Warranty period: 2 years
Plastic Indoor
►► Easy Retrieve™ memory Height: 16.5 cm
►► QuickCheck™ Width: 14.6 cm
►► Solar Sync Delay Depth: 5 cm

►► Automatic short circuit protection

CONTROLLERS
►► Seasonal Adjustment: Global or automatic
updates with Solar Sync
►► Delay between stations
►► Sensor programmability

ELECTRICAL SPECIFICATIONS
• Transformer input: 120 VAC or 230 VAC (international model)
• Transformer output (24 VAC): 1 A
• Station output (24 VAC): 0.56 A
• P/MV: (24 VAC): 0.28 A
• Sensor inputs: 1
• Operating temperature: -18º C to 60º C
Plastic Outdoor
Height: 22 cm
APPROVALS Width: 17.8 cm
• CE, UL, cUL, C-tick, FCC Depth: 9.5 cm

► = Advanced Feature descriptions on pages 95 and 96

X-CORE – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Models 2 Transformer 3 Indoor/Outdoor 4 Options

XC-2 = 2-Station 00 = 120 VAC (blank) = Outdoor model (blank) = No option

(indoor model only)
01 = 230 VAC i = Indoor model E = 230 VAC with European connections
XC-4 = 4-Station A = 230 VAC with Australian connections
(Australian outdoor models have internal
XC-6 = 6-Station transformer with cord)
XC-8 = 8-Station

Examples:
XC-201i - E = 2-Station 230 VAC indoor controller, with plastic cabinet
XC-401 - E = 4-Station 230 VAC outdoor controller, with plastic cabinet
XC-601i - E = 6-Station 230 VAC indoor controller, with plastic cabinet
XC-801 - E = 8-Station 230 VAC outdoor controller, with plastic cabinet

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 99

 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

PRO-C® & PCC

Number of Stations: 4 - 16, 6 & 12 
Type: Modular & Fixed

FEATURES
• Number of stations: • Max. station run time: 6 hours
-- Pro-C: 4-16 • Solar Sync® Delay feature allows
-- PCC: 6 & 12 adjustments to be postponed
for up to 99 days
• Type:
• Cycle and Soak feature built in:
-- Pro-C: Modular
reduces runoff
-- PCC: Fixed
• Added knockouts for additional
• Enclosures: Indoor and outdoor flexibility
plastic
• Non-volatile memory
• Independent irrigation programs: 3
• Rain sensor bypass
• Independent lighting programs: 3
• One touch manual start and advance Plastic Indoor
• Start times per program: 4
• Warranty period: 2 years Height: 20.9 cm
Width: 24.3 cm
►► Solar Sync Dial Position
Depth: 9.7 cm
►► Easy Retrieve™ memory
CONTROLLERS

►► QuickCheck™
►► Automatic short circuit protection
►► Seasonal Adjustment: Global or automatic updates with Solar Sync
►► Delay between stations
►► Sensor programmability
►► Non-Water Days

ELECTRICAL SPECIFICATIONS
• Transformer input: 120 VAC or 230 VAC (international model)
• Transformer output (24 VAC): 1 A
• Station output (24 VAC): 0.56 A
• P/MV output (24 VAC): 0.28 A Plastic Outdoor
Height: 22.5 cm
• Sensor inputs: 1
Width: 25 cm
• Operating temperature: -18º C to 60º C Depth: 11 cm

APPROVALS
• CE, UL, cUL, C-tick, FCC

► = Advanced Feature descriptions on pages 95 and 96

PCM-300 and PCM-900 Expansion Modules

These modules are compatible with the new Pro-C 400 series.

PRO-C SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 PC-SERIES STATION EXPANSION

1 Models 2 Transformer 3 Indoor/Outdoor 4 Options Modules Description

PC-4 = 4-station 00 = 120 VAC (blank) = Outdoor Model (blank) = No option PCM-300 3-Station plug-in module:
base module controller (internal transformer) Use to increase station count
01 = 230 VAC E = 230 VAC with
from 4 to 7, 7 to 10, and
i = Indoor Model European Connections
PCC-6 = 6-Station 10 to 13
(plug-in transformer)
A = 230 VAC with
PCC-12 = 12-Station Australian Connections PCM-900 9-Station plug-in module:
(outdoor models have Use to increase station count
internal transformer from 7 to 16 only
with cord)

Examples:
PC-400 = Modular 4-Station outdoor base unit, internal 120 VAC transformer, and plastic cabinet
PCC-601i - E = Fixed 6-Station indoor controller, plug-in 230 VAC transformer with European
connections, and plastic cabinet
PCC-1200 = Fixed 12-Station outdoor controller, Internal 120 VAC transformer, and plastic cabinet

100 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

Easy access

Easier access to wiring

Replaceable battery

Replaceable lithium 3 V battery

Base Module

New 4 station base module

Improved design

CONTROLLERS
Relocated sensor terminals and
common screw

The New Pro-C®

Same world-class reliability, with additional features such as a Solar Sync® dial position, cycle and soak, and built-in lighting
programs, which enable it to control landscape lighting for a complete residential solution.

SOLAR SYNC DIAL POSITION 4 STATION BASE MODULE MORE DURABLE CONNECTIONS

 asily upgrade and program smart

E Better options for more stations, Replaceable, more flexible ribbon cable
control without additional wiring expandable to 16 stations similar to I-Core®

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 101

 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

I-CORE ® Number of Stations: 6 to 42 

Type: Modular

FEATURES
• Number of stations: 6 to 42 ►► Real time flow monitoring
• Type: Modular ►► Easy Retrieve™ memory
• Enclosure: Outdoor plastic or metal ►► QuickCheck™
• Independent programs: 4 ►► Automatic short circuit protection
• Built in Solar Sync® ►► Seasonal Adjustment: Global, Monthly,
• Start times per program: by program and Solar Sync
8 (A, B, C); 16 (D) ►► Delay between stations
• Max. station run time: 12 hours ►► Sensor programmability Plastic Outdoor
• One touch manual start ►► Cycle and Soak Height: 28 cm
and advance ►► No Water Window Width: 34 cm
Depth: 16 cm
• Programmable rain delay ►► Non-Water Days
• Non-volatile memory ►► Solar Sync Delay
• Warranty period: 5 years ►► Multi-language programming
CONTROLLERS

ELECTRICAL SPECIFICATIONS
• Transformer input: 120/230 VAC, 50/60 Hz
• Transformer output (24 VAC): 1.4 A
• Station output (24 VAC): 0.56 A
• P/MV output (24 VAC): 0.28 A
Metal Wall Mount
• Simultaneous program operation: 2 (grey or stainless steel)
• Sensor inputs: Plastic: 2; Metal: 3 Height: 31 cm
Width: 39 cm
• Operating temperature: -18º C to 60º C
Depth: 15 cm

APPROVALS
• CE, UL, cUL, C-tick, FCC
• Steel wall mounts: IP-56
• Plastic pedestal: IP-24
• Plastic wall mount: IP-44

► = Advanced Feature descriptions on pages 95 and 96

Plastic Pedestal Metal Pedestal
Height: 97 cm (grey or stainless steel)
Width: 55 cm Height: 92 cm
Depth: 40 cm Width: 39 cm
Depth: 13 cm

I-CORE ICM-600 Expansion Module

I-Core's unique “bridge” modules
Model Description activate the existing terminal strips
IC-600-PL 6-Station controller, indoor/outdoor, plastic cabinet
IC-601-PL International version, 6-Station controller, indoor/outdoor, plastic cabinet
IC-600-M 6-Station controller, indoor/outdoor, metal cabinet
IC-600-PP 6-Station controller, indoor/outdoor, plastic pedestal ENCLOSURE TYPES & EXPANSION
IC-600-SS 6-Station controller, indoor/outdoor, stainless steel cabinet Enclosure Type Expands To
ICM-600 6-Station plug-in expansion module Plastic cabinet 30-Stations
Metal pedestal, gray powder-coated, for use with I-Core and Metal/stainless steel cabinet 42-Stations
ACC-PED
ACC metal controllers
Plastic pedestal 42-Stations
Stainless steel pedestal for use with I-Core and ACC stainless
PED-SS
steel controllers Metal/stainless steel pedestal 42-Stations

102 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

DUAL FOR I-CORE ® ® Number of Stations: Up to 48 

Type: Decoder

FEATURES
• Two-wire decoder system for I-Core controllers
• Decoder station sizes available: 1, 2
• Field programmable decoders (no serial numbers to enter)
• DUAL-S external surge protection module
• DUAL decoder module display and push button programming make it easy to
program decoders at the controller itself
• Decoder module displays decoder operation and diagnostic information
• Can operate up to 48 stations of combined decoder and conventional control
making system retrofit easy
• Waterproof connectors for connection to two-wire path included with all DUAL
decoders and DUAL-S surge protection
DUAL Decoder Module
• Number of two-wire paths: 3 Height: 3.5 cm
• Solenoid finder feature assists in locating valves in the field Width: 11 cm
Depth: 10 cm

CONTROLLERS
• Wireless programming with ICD-HP
►► Programmable decoders

DUAL SPECIFICATIONS
• Max. recommended distance, decoder to solenoid: 30 m
• Max. distance to decoder
• 2 mm2 wire path: 1,500 m
• 3.3 mm2 wire path: 2,300 m

APPROVALS
• CE, UL, cUL, C-tick, FCC

► = Advanced Feature descriptions on pages 95 and 96

DUAL Decoders and Surge Arrestor
Height: 7.6 cm
Width: 4.4 cm
Depth: 5 cm

DUAL ID WIRE MODEL GUIDE

Base Model Plus Description 2 mm2 Standard 3.3 mm² Long Range,
Decoder Cable Heavy-duty Decoder Cable
48-Station controller, indoor/outdoor, plastic cabinet
IC-600-PL DUAL48M
(USA) ID1GRY Grey jacket ID2GRY Grey jacket
48-Station controller, indoor/outdoor, plastic cabinet ID1PUR Purple jacket ID2PUR Purple jacket
IC-601-PL DUAL48M
(international)
ID1YLW Yellow jacket ID2YLW Yellow jacket
IC-600-M DUAL48M 48-Station controller, indoor/outdoor, metal cabinet
ID1ORG Orange jacket ID2ORG Orange jacket
IC-600-PP DUAL48M 48-Station controller, indoor/outdoor, plastic pedestal
ID1BLU Blue jacket ID2BLU Blue jacket
48-Station controller, indoor/outdoor,
IC-600-SS DUAL48M ID1TAN Tan jacket ID2TAN Tan jacket
stainless steel cabinet

DUAL Model Description

Dual decoder output module. Plug-in module converts any I-Core
DUAL48M MAXIMUM WIRE RUNS
controller to two-wire decoder system (up to 48-Station maximum)
DUAL-1 DUAL 1-Station decoder (includes 2 DBRY-6 connectors) ID 1 Wire ID 2 Wire

DUAL-2 DUAL 2-Station decoder (includes 2 DBRY-6 connectors) 1500 m with I-Core/DUAL systems 2300 m with I-Core/DUAL systems

DUAL-S Dual surge arrestor (includes 4 DBRY-6 connectors) 3 km with ACC/ICD systems 4.5 km with ACC/ICD systems

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 103

 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

ACC
Number of Stations: 12 to 42 
Type: Modular

FEATURES
• Number of stations: 12 to 42
• Type: Modular
• Enclosure: Outdoor plastic and stainless steel
• Independent programs: 6
• Start times per program: 10
• Max. station run time: 6 hours
• Built in Solar Sync®
• One touch manual start and advance
• Non-volatile memory
• Programmable rain delay
• Warranty period: 5 years
►► Real time flow monitoring
►► Solar Sync Delay
CONTROLLERS

►► Easy Retrieve™ memory

Metal Enclosures
►► Automatic short circuit protection (grey or stainless steel)
►► Seasonal Adjustment: Global, by Program, Height: 31 cm
and/or by Solar Sync Width: 39 cm
►► Delay between stations Depth: 16 cm

►► Sensor programmability
►► Cycle and Soak
►► No Water Window
►► Simultaneous station groups

ELECTRICAL SPECIFICATIONS
• Transformer input: 120/230 VAC, 50/60 Hz
• Max. AC Current Draw: 120 VAC, 2 Amps; 230 VAC, 1 Amp
(max. computed with all programs running
and optional accessories installed)
• Transformer output (24 VAC): 4.0 A
• Station output (24 VAC): 0.56 A
• P/MV output (24 VAC): 0.32 A
• P/MV: 2, normally-closed
• Sensor inputs: 4 + Flow Metal Pedestals Plastic Pedestal
• Operating temperature: -18º C to 60º C (grey or stainless steel) Height: 97 cm
Height: 94 cm Width: 55 cm
Width: 39 cm Depth: 40 cm
APPROVALS Depth: 13 cm
• CE, UL, cUL, C-tick, FCC
• Metal wall mounts: IP-56
• Plastic pedestal: IP-24

ALL STAINLESS STEEL (SS) MODELS

• American-made Type 304 Stainless Steel 1.45 mm gauge steel
• Passivated for corrosion resistance ACM-600 AGM-600
Standard 6-Station output Optional Extreme Service
► = Advanced Feature descriptions on pages 95 and 96 module with heavy-duty high-lightning 6-Station
surge protection output module

104 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

ACC STATION EXPANSION MODULES

Model Description Modules Description
ACC-1200 12-Station base unit controller, expands to 42-Station, metal cabinet
6-Station plug-in module for use with
12-Station base unit controller, expands to 42-Station, stainless steel ACM-600
ACC-1200-SS the ACC-1200 series controllers
wall mount cabinet
12-Station base unit controller, expands to 42-Station,
ACC-1200-PP
plastic pedestal 6-Station plug-in module for use with
Metal pedestal, grey powder-coated, for use with I-Core and ACC the ACC-1200 series controllers
ACC-PED AGM-600
metal controllers (extreme service lightning protection
Stainless steel pedestal for use with I-Core and ACC stainless steel version)
PED-SS
controllers

ACC Controller

CONTROLLERS
Solar Sync®

The ACC controller uses its programmed run time

and adjusts to Solar Sync’s seasonal adjustment
value to modify the actual irrigation run time.

ROAM XL / ROAM
Loaded with Potential
These compact, high-powered remotes can be
carried from job to job and used to remotely
ACC is ready to accept a variety of accessories to save time, access any Hunter controller that has
money, and water. Plug in ROAM or ROAM XL for remote control a SmartPort® connector.
of stations and programs. Connect the Hunter Flow-Sync® to
measure and monitor actual flow. Attach a Solar Sync® sensor to
automatically adjust watering amounts for local climate conditions
(and provide rain shutoff). Put all of ACC’s onboard intelligence to
work for you with these innovative optional solutions.

Flow-Sync®

A proven water saver, the Flow-Sync connects to

the ACC controller to measure actual flow, and
provides automatic reaction to high or low flow
conditions during irrigation.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 105

 ACC-99D DECODER DECODER MO
ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR
Model Description Model
2-Wire decoder controller with 99-Station ICD-100
ACC-99D
capacity, metal cabinet

ACC-99D
Number of Stations: 1 to 99  ICD-200
2-Wire decoder controller with 99-Station
Type: Decoder
ACC-99D-SS
capacity, stainless wall mount ICD-400
2-Wire decoder controller with 99-Station
ACC-99D-PP ICD-600
capacity, plastic pedestal
Metal pedestal, grey powder-coated, for use ICD-SEN
ACC-PED
with I-Core and ACC metal controllers
FEATURES
Stainless steel pedestal for use with I-Core and
• Includes all features of the ACC controller, plus decoder operations PED-SS
ACC stainless controllers
• Built in Solar Sync®
ICD-100, 200, ICD-SEN
• Decoder station sizes available: 1, 2, 4, 6 Height: 92 mm
• Sensor decoder available with Flow and Clik inputs Width: 38 mm
• Max. recommended distance, decoder to solenoid: 45 m Depth: 12.7 mm
• ICD-HP wireless handheld programmer compatible
ICD-400, 600
• Two-way communications
Height: 92 mm
• Surge suppression: Internal (ground wire included) Width: 46 mm
• Dual P/MV outputs may be assigned to decoders Depth: 38 mm
• Wire path connectors included with each decoder
• Number of wire paths: 6
• Automatic daily weather-based scheduling with optional
Hunter Solar Sync sensor
CONTROLLERS

►► Seasonal Adjustment: Global, by Program, and/or Solar Sync

►► Programmable decoders
►► Solar Sync Delay

ELECTRICAL SPECIFICATIONS ID WIRE MODEL GUIDE

• Transformer input: 120/230 VAC, 50/60 Hz 2 mm2 Standard Decoder 3,3 mm² Long Range, Heavy-
• Transformer output: 24 VAC, 4 A, at 120 VAC Cable duty Decoder Cable
-- Decoder Line (path) output: 34 V peak-to-peak ID1GRY Grey jacket ID2GRY Grey jacket
-- Decoder Power draw: 40 mA per active output
ID1PUR Purple jacket ID2PUR Purple jacket
-- Solenoid capacity: 2 standard 24 VAC Hunter solenoids per
output within 45 m runs, up to 14 solenoids max. simultaneous ID1YLW Yellow jacket ID2YLW Yellow jacket
(includes DUAL® P/MV outputs) ID1ORG Orange jacket ID2ORG Orange jacket
• Wiring, Decoder to solenoid: 45 m max.
ID1BLU Blue jacket ID2BLU Blue jacket
• 6 two-wire output paths to field decoders
ID1TAN Tan jacket ID2TAN Tan jacket
• Diagnostic LEDs with line status, signal activity, decoder and status

► = Advanced Feature descriptions on pages 95 and 96

ID WIRE MAXIMUM WIRE RUNS
ID 1 Wire ID 2 Wire

1500 m with DUAL systems 2300 m with DUAL systems

3 km with ICD systems 4.5 km with ICD systems

ACC-99D DECODER DECODER MODELS

Model Description Model Description
2-Wire decoder controller with 99-Station ICD-100 Single-station decoder with surge suppression and ground wire
ACC-99D
capacity, metal cabinet
ICD-200 2-Station decoder with surge suppression and ground wire
2-Wire decoder controller with 99-Station
ACC-99D-SS
capacity, stainless wall mount ICD-400 4-Station decoder with surge suppression and ground wire
2-Wire decoder controller with 99-Station
ACC-99D-PP ICD-600 6-Station decoder with surge suppression and ground wire
capacity, plastic pedestal
Metal pedestal, grey powder-coated, for use ICD-SEN 2-input sensor decoder with surge suppression and ground wire
ACC-PED
with I-Core and ACC metal controllers
Stainless steel pedestal for use with I-Core and
PED-SS
ACC stainless controllers

106 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

ICD-HP Type: Decoder Programmer

FEATURES
• Program or re-program decoder stations, whether new or installed
• Program any station numbers in any order, or skip stations
for future expansion
• Simplifies setup and diagnostics for sensor decoders
• Sensor test functions for Clik and Flow sensors, plus built-in multimeter
• Communicates with decoder through plastic case: wireless electro-magnetic
induction saves waterproof connectors
• Compatible with Hunter ICD-HP, DUAL®, and Pilot® series decoders
• USB powered for shop or office use; 4 AA batteries for field use
• All test leads and cables included in durable, foam-padded carrying case
ICD-HP
• Turn decoder stations on and view solenoid status, current in Height: 21 cm
milliamps, and more Width: 9 cm
• Waterproof programming cup Depth: 5 cm

CONTROLLERS
• Backlit adjustable display
Packaged in an outdoor carrying case, this complete kit
• 6 operating languages includes probes, induction cup, cable, USB power cable for
bench use, and 4 AA batteries for field work.
ELECTRICAL SPECIFICATIONS
• Power input: 4 AA batteries, or standard USB connector (included)
• Communications: Wireless induction, range 25 mm
• Fused test leads for unpowered decoder functions
ICD-HP
APPROVALS
• FCC, CE, C-tick (no licence required)

ICD-HP
Model Description

Wireless handheld decoder programmer,

ICD-HP includes all test and power leads,
programming cup, and rugged carrying case

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 107

 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

ROAM
Range: Up to 300 m
Type: Remote

FEATURES
• Works with Hunter X-Core®, Pro-C®, PCC, I-Core® and ACC controllers
through a SmartPort® connection
• 128 programmable addresses for use of multiple Roam remotes in the
same neighborhood
• Run manual watering cycles without modifying regular program
• Programmable run times: 1 to 90 minutes
• Range: 300 m (line of sight)
• Warranty period: 2 years

REMOTE SPECIFICATION
• Transmitter power source: 4 AAA batteries included
• Receiver power source: 24 VAC, from controller through a
SmartPort connector
CONTROLLERS

• System operating frequency: 433 MHz band

• SmartPort connector can be mounted up to 15 m (max.) from controller Transmitter and Receiver
(use ROAM-SCWH shielded cable wiring harness) Height: 18 cm
• FCC approved: No FCC licence required Width: 6 cm
Depth: 3 cm

ROAM
Model Description
Transmitter, receiver, SmartPort wiring harness, and 4 AAA
ROAM-KIT
batteries included
ROAM-R Receiver unit
SmartPort Wall Mount Bracket for
ROAM-TR Transmitter unit, and 4 AAA batteries included
Hunter remotes require the SmartPort
installation of a SmartPort P/N 258200
wiring harness. The SmartPort
OPTIONS is a connector that is wired to
the terminals on the controller,
Model Description and allows quick connection to
any Hunter remote.
ROAM-WH SmartPort wiring harness (length: 1.8 m)
ROAM-SCWH Shielded SmartPort wiring harness (length: 7.6 m)
258200 Wall mount bracket for SmartPort

108 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

ROAM XL
Range: Up to 3 km 
Type: Remote

FEATURES
• Works with Hunter X-Core®, Pro-C®, PCC, I-Core® and ACC controllers
through a SmartPort® connection
• Up to 3 km (line of sight) range for remote manual operation
of Hunter irrigation systems
• 128 different programmable addresses
• Display shows remaining battery life
• Programmable run times: 1 to 90 minutes
• Large LCD display, push-button operation
• Run manual watering cycles without modifying regular program
• Rugged plastic carrying case included
• Warranty period: 3 years

REMOTE SPECIFICATION

CONTROLLERS
• Transmitter power source: 4 AAA batteries included
• Receiver power source: 24 VAC, from controller through a
SmartPort connector
• System operating frequency: 27 MHz band
• SmartPort connector can be mounted up to 15 m (max.) from controller
(use ROAM-SCWH shielded cable wiring harness)
• FCC approved: No FCC licence required
* Not available in all countries.
Roam XL
(w/o antenna)
Height: 16 cm
Width: 8 cm
Depth: 3 cm

ROAM XL
Model Description
Transmitter, receiver, SmartPort wiring harness, 4 AAA batteries and
ROAMXL-KIT
plastic carrying case included
ROAMXL-R Receiver unit (SmartPort wiring harness included)
SmartPort Wall Mount Bracket for
ROAMXL-TR Handheld transmitter, and 4 AAA batteries included
Hunter remotes require the SmartPort
ROAMXL-CASE Plastic carrying case installation of a SmartPort P/N 258200
wiring harness. The SmartPort
ROAM-WH SmartPort wiring harness (length: 1.8 m)
is a connector that is wired to
ROAM-SCWH Shielded SmartPort wiring harness (length: 7.6 m) the terminals on the controller,
and allows quick connection to
any Hunter remote.
OPTIONS

Model Description

258200 Wall Mount Bracket for SmartPort

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 109

 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

XC HYBRID
Number of Stations: 6, 12 
Type: Battery Operated, Fixed

FEATURES
• Battery or AC powered
• Type: Fixed
• Number of stations: 6, 12
• Operates DC latching solenoids only
• Enclosures: Indoor and outdoor plastic; outdoor stainless steel
• Independent programs: 3
• Start times per program: 4
• Max. station run time: 4 hours
Plastic Indoor/Outdoor Stainless Steel Outdoor
• Optional Solar Panel SPXCH provides maintenance-free operation Height: 22 cm Height: 25 cm
• Compatible with Solar Panel Kit Width: 18 cm Width: 19 cm
• One touch manual start and advance Depth: 10 cm Depth: 11 cm

• Warranty period: 2 years

►► Easy Retrieve™ memory
CONTROLLERS

►► Rain sensor bypass

►► Programmable rain delay
►► Non-volatile memory XC HYBRID O
►► Seasonal Adjustment: Global Model Description O
►► Delay between stations XCH-600 6-Station indoor/outdoor controller X
►► Sensor programmability
XCH-600-SS 6-Station outdoor controller, stainless steel X
XCH-1200 12-Station indoor/outdoor controller
ELECTRICAL SPECIFICATIONS 4
XCH-1200-SS 12-Station outdoor controller, stainless steel
• Operates DC latching solenoids (only) 9-11 VDC S
• P/MV XCHSPOLE SPXCH N
• Sensor inputs: 1 with XCHSPB installed pole Optional solar panel *
• Operating temperature: -18º C to 60º C for stainless steel model Height: 8 cm
Height: 1 m Width: 8 cm
Depth: 2 cm
POWER SOURCE
• Operates on battery power or 24 VAC plug in transformer or optional
Solar Panel
• Plastic model uses 6 AA batteries
• Stainless steel model uses 6 C batteries MAXIMUM WIRE RUNS
Wire Size Max. Distance (m)
APPROVALS
1 mm 2
152
• CE, UL, cUL, C-tick
1.5 mm2 244
• Plastic model: IP-24
2 mm2 396
► = Advanced Feature descriptions on pages 95 and 96
2.5 mm 2
610

XCXC
HYBRID
HYBRID OPTIONS
OPTIONS(SPECIFY
(SPECIFY
SEPERATELY)
SEPERATELY)
Model
Model Description
Description Options
Options Description
Description
XCH-600
XCH-600 6-Station
6-Station
indoor/outdoor
indoor/outdoor
controller
controller XCHSPOLE
XCHSPOLE Steel
Steel
mounting
mounting
pole
pole
(1.2
(1.2
m)m)
XCH-600-SS
XCH-600-SS 6-Station
6-Station
outdoor
outdoor
controller,
controller,
stainless
stainless
steel
steel Stainless
Stainless
steel
steelmounting
mountingbracket
bracket
XCHSPB
XCHSPB
(required
(required
forfor
pole)
pole)
XCH-1200
XCH-1200 12-Station
12-Station
indoor/outdoor
indoor/outdoor
controller
controller
458200*
458200* DCDC
latching
latching
solenoid
solenoid
XCH-1200-SS
XCH-1200-SS 12-Station
12-Station
outdoor
outdoor
controller,
controller,
stainless
stainless
steel
steel
SPXCH
SPXCH Solar
SolarPanel
PanelKitKit
forfor
XCXC
Hybrid
Hybrid

Notes:
Notes:
* Use
* Use
DCDC
latching
latching
Solenoids
Solenoids
only
only

110 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

NODE
Number of Stations: 1, 2, 4, 6 
Type: Battery Operated, Fixed

FEATURES
• Type: Fixed
• Battery Operated
• Number of stations: 1, 2, 4, 6
• Enclosure: Outdoor plastic
• Independent programs: 3
• Start times per program: 4
• Max. station run time: 6 hours
• One touch manual start and advance
• Master Valve operation (available in 2, 4, 6 station models) NODE-100 NODE-200
• Solar Panel Kit (SPNODE) provides maintenance-free operation Diameter: 9 cm NODE-400
Height: 6 cm NODE-600
• Accepts single or double 9 V batteries for extended battery life Diameter: 9 cm
• Solenoid wire length up to 30 m (use 1 mm2 wire) Height: 6 cm

CONTROLLERS
• Programmable off mode
• Submersible to 4 m (IP68 rated)
• Battery life indicator
• Protective rubber cover
• Warranty period: 2 years
►► Easy Retrieve™ memory
►► Seasonal Adjustment: Global

ELECTRICAL SPECIFICATIONS
• Sensor inputs: 1
• Operates DC latching solenoids only (P/N 458200) NODE-100-Valve SPNODE
• Operating temperature: -18º C to 60º C Diameter: 9 cm Height: 8 cm
Height: 6 cm Width: 8 cm
• Power source: 9 V battery (up to two) or Solar Panel
Depth: 2 cm
• Solar Panel Kit SPNODE eliminates the need for batteries and provides
maintenance-free operation

APPROVALS
• CE

► = Advanced Feature descriptions on pages 95 and 96

NODE MAXIMUM WIRE RUNS

Model Description Wire Size Max. Distance (m)
NODE-100 Single station controller (DC latching solenoid included) 1 mm 2
30

NODE-200 2-Station controller (DC latching solenoid ordered separately)

NODE-400 4-Station controller (DC latching solenoid ordered separately) OPTIONS (SPECIFY SEPARATELY)
NODE-600 6-Station controller (DC latching solenoid ordered separately) Model* Description
NODE-100-VALVE Single station controller with PGV-101-G valve and DC latching solenoid (NPT threads) 458200 DC latching solenoid
NODE-100-VALVE-B Single station controller with PGV-101-GB valve and DC latching solenoid (BSP threads) SPNODE Solar Panel Kit for Node

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 111

 ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

WVP & WVC

Number of Stations: 1, 2, 4
Type: Battery Operated, Fixed

FEATURES
• Type: Fixed
• Battery Operated
• Number of stations: 1, 2, 4
• Enclosure: Outdoor plastic
• Independent station programming
• Start times per program: 9
• Max. station run time: 4 hours
WVP
• WVC submersible to 3 m (IP68 rated) Height: 29 cm
• Battery life indicator Width: 8 cm
• Wireless remote programming Length: 5 cm

• Max. solenoid wire run 30 m (use 1 mm2 wire)

• Warranty period: 2 years
CONTROLLERS

ELECTRICAL SPECIFICATIONS
• Simultaneous station operation
• Sensor inputs: 1
• Power source: 9 V battery
• Operates DC latching solenoids only (P/N 458200)
WVC
• Operating temperature: -18º C to 60º C Diameter: 8 cm
• Frequency: 869 MHz ISM band Height: 13 cm
• No FCC licence required

APPROVALS
• CE

WVP / WVC MAXIMUM WIRE RUNS

Model Description Wire Size Max Distance (m)
Single station wireless controller (DC latching solenoid ordered separately) 1 mm2 30
WVC-100
900 MHz ISM band (US/Australia)
2-Station wireless controller (DC latching solenoid ordered separately)
WVC-200
900 MHz ISM band (US/Australia)
4-Station wireless controller (DC latching solenoid ordered separately)
WVC-400
900 MHz ISM band (US/Australia)
Single station wireless controller (DC latching solenoid ordered separately)
WVC-100-E
869 MHz (Europe)
2-Station wireless controller (DC latching solenoid ordered separately)
WVC-200-E
869 MHz (Europe)
4-Station wireless controller (DC latching solenoid ordered separately)
WVC-400-E
869 MHz (Europe)
WVP Wireless valve programmer to be used with wireless valve controllers
WVPE Wireless valve programmer to be used with wireless valve controllers (Europe)

112 Visit hunterindustries.com

ELC X-CORE® PRO-C® I-CORE® DUAL® ACC ACC-99D ICD-HP ROAM ROAM XL XCH NODE WVP/WVC PSR

PSR Type: Accessory

PUMP START RELAY

FEATURES
• Choice of three models sized accordingly to fit your particular application
• NEMA 3R rated locking plastic enclosure rated for outdoor use, weather
resistance and security
• 24 VAC flying leads make it quick and easy to wire to controller
• The PSR-22 meets demanding electrical requirements for UL approval, and
the PSR-52/-53 contains UL-approved relays
• Warranty period: 2 Years

Pump Start Relay

Height: 17 cm
Width: 19 cm
Depth: 12 cm

CONTROLLERS
PUMP START RELAY
Model Description
PSR-22 Double pole/single throw pump start relay for 120 VAC pumps up to 2 hp or 230 VAC pumps up to 2 kW
PSR-52 Double pole/single throw pump start relay for 120 VAC pumps up to 3 hp or 230 VAC pumps up to 2.2 kW
Triple pole/single throw pump start relay for 120 VAC pumps up to 3 hp, 230 VAC pumps up to 2.2 kW,
PSR-53
or 230 VAC pumps up to 7.5 kW (3 phase)
PSRB Used to boost controller output power available to operate larger pump start relays if necessary

PUMP START RELAY ELECTRICAL SPECIFICATIONS

Model Single Phase 3 Phase Max. Full Load Max. Resistive Coil VA Coil VA
kW AT 120 VAC kW AT 230 VAC kW AT 230 VAC AMPS AMPS IN-RUSH AMPS HOLDING AMPS
PSR-22 2* 5* N/A 30 40 31 (1.29) 7 (0.29)
PSR-52 2.2 5.6 N/A 40 50 56 (2.33) 6 (0.25)
PSR-53 2.2 5.6 7.5 40 50 56 (2.33) 6 (0.25)
Note:
* Approximate power

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 113

 SECTION 06:
CENTRAL
CENTRAL

114
115
CENTRAL
 IMMS®

Sites: Up to 100

IMMS ® Controllers: Up to 1,000

Number of Stations: Up to 990,000

Hunter’s Irrigation Management & Monitoring Software

(IMMS) is a PC-based software package that makes central
control of large-scale irrigation systems affordable, usable,
and comprehensible. IMMS software and hardware have been
intensively developed and refined into a graphically based
irrigation command and control program. With IMMS, interactive
map graphics (to station level) put the irrigation system manager
in complete visual control of wide-area watering operations.

Add a visual dimension to central

control with background map graphics

FEATURES INCLUDE:

MAPS (Compatible with AutoCAD) IMMS-ET (Evapotranspiration)

CENTRAL

The IMMS® Graphics feature creates map views so you can see Take the guesswork out of irrigation amounts and daily
all of your irrigated locations and get a more detailed view. adjustments for weather conditions. The optional IMMS-ET
software add-on uses cost-effective local sensors, combined with
IMMS Graphics simplifies life for busy irrigators with large your station database (for plant types, soil, precipitation rate, and
numbers of assets to control. Use any background image to more) to create water-saving irrigation programs for your whole
show the system, site, or controller area, and create control zones system, every day.
and station symbols that link to command functions. You supply
the pictures, and IMMS includes all the tools you need to create IMMS-ET models the moisture level in soil reservoirs (including
an interactive map-based system. compensation for natural rainfall) and schedules just enough
irrigation to replace what your plants need. IMMS-ET can track
PROGRAMMING climate history according to your own sensors and document how
it has responded with irrigation adjustments.
Each controller has its own complete setup and operations screens
with tools to quickly get the results you want. Easily access every FLOW MONITORING
function from simple spreadsheets or by choosing from a menu
of common functions and commands. In the case of emergencies, Track your water usage, and spot plumbing problems a mile
irrigation can be shut off with the click of a mouse. away (or several hundred miles away). IMMS is built around the
powerful ACC controller platform, which includes real-time flow
ALARM MANAGEMENT monitoring. With a flow meter and normally-closed master valves,
the ACC detects incorrect flow conditions and moves swiftly to
With individual date- and time-stamped messages, IMMS Graphics
isolate the offending valves. Each flow violation is reported to the
reports all alarms, including over-currents, flow violations,
central software, after the controller has finished its own
communication issues, and water window violations. No more
diagnostics. Leaks, breaks, and flooding are minimised, and
driving to each individual site; the IMMS Graphics operator
the irrigation manager is the first to know of any issues.
understands the condition of all irrigation controllers and valves at
a glance. Reports can be exported to additional formats or printed
IMMS also tracks total water usage by site, controller, program,
and provided to work crews for investigation.
and station. Keep detailed historical records, and go home each day
with the peace of mind provided by automatic flow monitoring.

116 Visit hunterindustries.com

 IMMS®

IMMS®
FEATURES
• Windows®-based programming and communications software
• Total control of each controller’s functions
• Graphical user interface with customisable map-based navigation
• New Map utility allows direct import of linework and layers
• Flow monitoring and reporting with Hunter ACC controllers
• Alarm reporting and detailed irrigation history reports
• Wireless and hardwired communication options, including Ethernet
and GPRS
• Controller sharing of communications channels to reduce
communications costs
Track flow and other vital statistics in both charts
• Compatible with water-saving Hunter Solar Sync® sensors, or
and spreadsheets
optional ET Sensors

KEY SPECIFICATIONS
• Operating system: Microsoft Windows XP, Vista, Windows 7, Windows 8
• Minimum RAM: 512 MB
• Minimum screen resolution: 1,024 x 768

CENTRAL
• Storage: At least 100 MB disk space
* Windows is a registered trademark of the Microsoft® Corporation

COMPATIBLE CONTROLLERS
• IMMS is optimised for the Hunter ACC controller and accessories
(including decoder controllers)

COMPATIBLE SENSORS Station level symbols can be positioned over

• Flow-Sync®: Hunter Flow-Sync sensor for ACC controllers (one per background images from any source
controller). Provides flow total reporting and flow alarm monitoring
with diagnostic shutdowns in real time.
• Clik Sensors: Each controller requires its own rain sensor for fast rain
shutdowns. All Hunter Clik sensors are compatible with ACC and other
Hunter controllers.
• ET Sensor: ET Sensor platform is for use with IMMS-ET software.
ET Sensor is added to selected ACC controllers, to report local conditions.
This local ET data has no additional monthly charges and can be shared
through the software to create schedules for other controllers in the same
micro-climate (including ICC or Pro-C controllers). Add as many
ET Sensors as needed to sample all micro-climates.
ET Sensor
• Solar Sync Sensor (wired or wireless): Each controller can use its own Height: 27 cm
SOLARSYNCSEN or WSS-SEN for smart, water-saving self-adjustment. Width: 18 cm
Solar Sync sensors also provide rain and freeze shutoff functions. Depth: 31 cm
Solar Sync compatibility is included with the basic IMMS4CD software.

IMMS SOFTWARE
Model Description Notes
IMMS4CD IMMS Graphics central control software Custom images not included

Optional ET automatic weather adjustment software Requires an ET Sensor at one or more ACC controller
IMMS-ET-CD
(requires IMMS4CD base model) locations

COMMUNICATION OPTIONS FOR ACC INTERFACE

Model Purpose
Visit hunterindustries.com
ACC-COM-HWR = Hardwire/radio module* options & COMMERCIAL IRRIGATION | Built on Innovation
RESIDENTIAL
Supports hardwire and radio communication
®
117
 *Model
Also supports radio andDescription
hardwire Notes
IMMS4CD IMMS Graphics central control software Custom images not included
IMMS®
Optional ET automatic weather adjustment software Requires an ET Sensor at one or more ACC controller
IMMS-ET-CD
(requires IMMS4CD base model) locations

COMMUNICATION OPTIONS FOR ACC INTERFACE

USER-INSTALLED
Model OPTIONS (SPECIFY SEPARATELY)
Purpose
ACC-HWIM
ACC-COM-HWR =Description
Model Hardwire/radio module* Supports hardwire and radio communication options
Purpose
ACC-HWIM Supports
Hardwire interface module required dial-up connections
for hardwire analog telephone line input in addition
Provides surge protected terminals for hardwired cable connections
ACC-COM-POTS = Dial-up modem module* to hardwire and radio communication sharing
(not 450-470
for use with VoIP lines) UHF radio module for wireless connections
RAD3 UHF radio module (North America), MHz
(licence and antenna required and not included)
Supports TCP/IP in Ethernet networks in addition to
ACC-COM-LAN = Ethernet module* Real Time Flow Monitoring

UHF radio module (International), 440-480

hardwire andMHz UHF radio module for wireless
radio sharing with local controllers connections, international only
ACC-COM
RAD460INT
“Consult factory for other international frequency ranges” (licence and antenna required and not included)
Supports mobile data connection via GPRS phone
ACC-COM-GPRS-E
IMMS SOFTWARE = GPRS cellular data
Holds Com modules and accessories in plastic pedestal
in addition to hardwire and radio sharing with
APPBRKT
module* Communication bracket for plastic pedestals
local controllers (not required in wall mounts)
Model Description Notes
RAD3 Plastic controller
Base
Note:
IMMS4CD Description Options
IMMS Graphics central control software Purpose
Custom images not included
* Also supports radio and hardwire None =adjustment
120 VAC (North America)
Optional ET automatic weather software Requires anHardwired
ET Sensor central
at one or more ACC
interface for controller
connection to site via direct wire (GCBL
IMMS-ET-CD Hardwire Central
IMMS-CCC (requires IMMS4CD baseEmodel
= 230) VAC (Europe/international
locations cable), supplied with USB cable for connection to central computer, and
Interface power) Wall mount communications installation
plug-in transformer
A = 230 VAC (Australia)
100 = 30 m
GCBL* 300 = 90 m Cable for all IMMS hardwired communications
COMMUNICATION OPTIONS FOR ACC INTERFACE
500 = 150 m
Model
Note: Purpose
IMMS-ANT2
*ACC-COM-HWR
GCBL available in=300 m increments
Hardwire/radio (up to 1200 m)
module* Supports hardwire and radio communication options
USER-INSTALLED OPTIONS (SPECIFY SEPARATELY)
Supports dial-up analog telephone line input in addition
ACC-COM-POTS = Dial-up modem module* to hardwire and radio communication sharing
RADIO ANTENNA OPTIONS (SPECIFY SEPARATELY)
CENTRAL

Model Description (not for use with VoIP lines) Purpose

Model
ACC-HWIM Description
Hardwire Supports
interface module required TCP/IPconnections
for hardwire in Ethernet networks in additionsurge
Provides
ACC-HWIM to protected terminals for hardwired cable connections
ACC-COM-LAN = Ethernet module*
hardwire and radio sharing with local controllers
Omni-directional antenna for plastic pedestal UHF radio module for wireless connections
IMMS-ANT2
RAD3 UHF radio module (North America), 450-470
Supports MHzdata connection via GPRS phone
mobile RAD3
lid installation
ACC-COM-GPRS-E = GPRS cellular data (licence and antenna required and not included)
in addition to hardwire and radio sharing with
module* UHF radio module (International), 440-480 MHz UHF radio module for wireless connections, international only
IMMS-ANT3
RAD460INT Omni-directional antenna for local
wallcontrollers
or pole mount installation
“Consult factory for other international frequency ranges” (licence and antenna required and not included)
ACC-COM
Note: High efficiency directional antenna for Holds Com modules and accessories in plastic pedestal
IMMS-ANTYAGI3
APPBRKT Communication bracket for plastic pedestals
pole
* Also supports radio and installation
hardwire (not required in wall mounts)
APPBRKT
High gain omni-directional mast antenna for roof
RA5M
Base Description Options Purpose
or pole installations
None = 120 VAC (North America)
Hardwired central interface for connection to site via direct wire (GCBL
Hardwire Central E = 230 VAC (Europe/international Plastic pedestal
IMMS-CCC cable), supplied with USB cable for connection to central computer, and
Interface power)
plug-in transformer
A = 230 VAC (Australia)
100 = 30 m Plastic pedestal communications installation
GCBL* 300 = 90 m Cable for all IMMS hardwired communications
500 = 150 m
USER-INSTALLED OPTIONS (SPECIFY SEPARATELY)
Note:
*Model
GCBL available in 300 m increments (up to 1200 m)
Description Purpose
ACC-HWIM Hardwire interface module required for hardwire connections Provides surge protected terminals for hardwired cable connections
RADIO ANTENNA OPTIONS (SPECIFY SEPARATELY) UHF radio module for wireless connections
RAD3 UHF radio module (North America), 450-470 MHz
Model Description (licence and antenna required and not included)
UHF radio module (International), 440-480 MHz UHF radio module for wireless connections, international only
RAD460INT Omni-directional antenna for plastic pedestal
IMMS-ANT2 “Consult factory for other international frequency ranges” (licence and antenna required and not included)
lid installation
Holds Com modules and accessories in plastic pedestal
APPBRKT Communication bracket for plastic pedestals
IMMS-ANT3 Omni-directional antenna for wall or pole mount installation (not required in wall mounts)

Base Description Options

High efficiency directional antenna for Purpose
IMMS-ANTYAGI3
pole installation
None = 120 VAC (North America)
High gain omni-directional mast antenna for roof Hardwired central interface for connection to site via direct wire (GCBL
RA5M Hardwire Central E = 230 VAC (Europe/international
IMMS-CCC or pole installations cable), supplied with USB cable for connection to central computer, and
Interface power)
plug-in transformer
A = 230 VAC (Australia)
100 = 30 m
GCBL* 300 = 90 m Cable for all IMMS hardwired communications
500 = 150 m

Note:
* GCBL available in 300 m increments (up to 1200 m)

RADIO ANTENNA OPTIONS (SPECIFY SEPARATELY)

Model Description
118 Omni-directional antenna for plastic pedestal
Visit hunterindustries.com
IMMS-ANT2
 IMMS®

SPECIFICATIONS
• ACC-COM-HWR, POTS, LAN, GPRS-E
• 8 cm x 11 cm x 4.5 cm
• Powered internally by controller
• Mounted internally to ACC controller
• RAD3, RAD460INT: 450-470 MHz, UHF Radios, Power Output: 1 Watt, Bandwidth: 12.5 kHz narrowband
• ACC-HWIM: Hardwire interface module for 4-20 mA loop communications, includes 8 colour-coded
terminals for GCBL connection, installs inside ACC controller cabinets or pedestals
• ACC-COM-LAN requires fixed IP address from system administrators
• ACC-COM-GPRS-E requires a monthly service plan

HARDWIRE COMMUNICATIONS CABLE

• GCBL shielded, two twisted pair 1 mm2 wire with ground wire, up to 3,000 m between each device

SYSTEM CONFIGURATIONS (ACC CONTROLLERS)

1. Determine how you will reach the first controller on each site
-- Dial-up landline: Add ACC-COM-POTS to controller
-- Hardwire cable: Add one IMMS-CCC at the computer, and ACC-COM-HWR plus one ACC-HWIM at the controller
-- Ethernet local area network: Add ACC-COM-LAN at the controller, and connect to the network (RJ-45 jack)
-- GPRS cell phone: Add ACC-COM-GPRS-E to controller (requires GPRS coverage and service contract)
2. Determine how that first controller will reach the other controllers on the site

CENTRAL
-- If by radio, add one RAD3 (US) or RAD460INT (international) plus antenna to the controller
-- If by hardwire cable, add one ACC-HWIM (if it is not already present as in 1)
3. Equip the other controllers. Add one ACC-COM-HWR to each controller, plus:
-- One ACC-HWIM when hardwire connection will be necessary
-- One RAD3 plus antenna when radio connections are necessary

SAMPLE CONFIGURATIONS
• Many other configurations possible; consult Hunter Technical Support or System Design Guide for details.

IMMS — Communications Options

LOCAL AREA NETWORK CELLULAR / RADIO & HARDWIRE

Real Time Flow Monitoring Real Time Flow Monitoring

Real Time Flow Monitoring Real Time Flow Monitoring

IMMS
Real Time Flow Monitoring

CENTRAL COMPUTER
DIAL-UP TELEPHONE HARDWIRED CABLE

Real Time Flow Monitoring Real Time Flow Monitoring Real Time Flow Monitoring Real Time Flow Monitoring

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 119

 120
SENSORS
SECTION 07:

SENSORS
SENSORS

121
 SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

SOLAR SYNC® Sensor: ET/Rain/Freeze

FEATURES
• Provides automated daily weather adjustment to program run times
• Wired and wireless models available
• Solar Sync may be used in IMMS central installations
• Rain and Freeze shutoff
• Gutter mount bracket included
• Compatible with all Hunter AC powered controllers
• Warranty period: 5 years (10 year battery warranty for wireless model)
Solar Sync Sensor Solar Sync Module
(w/mounting arm) Height: 4 cm
SPECIFICATIONS Height: 8 cm Width: 13 cm
Width: 22 cm Depth: 2 cm
• Maximum distance sensor to module: 60 m (wired model)
Depth: 2 cm
or 240 m (wireless model)
• 12 m of wire included in kit (wired model)
• Rain and Freeze sensor shutdown capability included

APPROVALS
• FCC, CE
SENSORS

Wireless Solar Sync Wireless Solar Sync

Sensor Receiver
(w/mounting arm) Height: 14 cm
Height: 11 cm Width: 4 cm
Width: 22 cm Depth: 4 cm
Depth: 2.5 cm

SOLAR SYNC
Model Description

Solar Sync kit for use with PCC and Pro-C 300 controllers.
SOLAR-SYNC
Includes Solar Sync Sensor and module.

Wired Solar Sync for use with ACC, I-Core®, new Pro-C® 400/PCC Series, and X-Core® controllers.
SOLAR-SYNC-SEN
Includes Solar Sync Sensor only.

Wireless Solar Sync for use with PCC and Pro-C 300 controllers.
WSS
Includes Wireless Solar Sync Sensor, Wireless receiver, and module.

Wireless Solar Sync for use with ACC, I-Core, new Pro-C 400/PCC Series, and X-Core controllers.
WSS-SEN
Includes wireless Solar Sync Sensor and wireless receiver.

122 Visit hunterindustries.com

SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

SOIL-CLIK™ Sensor: Soil Moisture

FEATURES
•
•
Soil moisture level and status at a glance
Shuts down irrigation when desired moisture level has been reached
NEW
• One-touch override allows soil moisture bypass for special conditions
• Low voltage outdoor enclosure powered by host controller
SOIL-CLIK Module
• Simple installation allows probe to be up to 300 m from controller Height: 11.4 cm
• Connect to Hunter sensor inputs, or use to interrupt common wires in Width: 8.9 cm
virtually any 24 VAC irrigation system Depth: 3.2 cm
Power: 24 VAC, 100mA max.
• Use with X-Core®, Pro-C® and I-Core®, and ACC Clik sensor inputs
Wire Leads: 80 cm
• Ideal companion sensor to Solar Sync®
• Warranty period: 5 years

SPECIFICATIONS
• Max distance, control module to controller: 2 m
• Max distance, control module to sensor probe: 300 m SOIL-CLIK Probe
• Input power: 24 VAC, 100mA max. Diameter: 2 cm
Height: 8.3 cm
• Output: Normally-closed dry contact closure Wire to Probe: 300 m max.
• Enclosure: NEMA 3R, indoor/outdoor 1 mm2 Direct Burial Wire
Wire Leads: 80 cm

SENSORS
SOIL-CLIK

Model Description

SOILCLIK Soil-Clik moisture sensor module and probe

Probe installed in root zone to monitor soil moisture

In turf applications, the probe should be placed in the root zone, approximately 15 cm deep
(adjust for actual turf conditions).

For shrubs or trees, select a deeper depth that matches the root zone. For new plantings,
choose a spot halfway down the root ball, adjacent to native soil.

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 123

 SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

RAIN-CLIK® Sensor: Rain

FEATURES
• Quick Response™ feature shuts the system off as soon as it starts raining
• Maintenance-free design with 10-year battery life for Wireless Rain-Clik
• Adjustable vent ring allows for setting of reset delay
• Rugged polycarbonate housing and metal extension arm
• Rain-Clik includes 7.6 m of 0.5 mm2 sheathed, two-conductor, UL-approved wire
• Wireless unit available with 244 m range from wireless sensor to receiver
• Compatible with most controllers
• Warranty period: 5 years (10 year battery warranty for wireless model)
RAIN-CLIK WR-CLIK-TR
SPECIFICATIONS Height: 6 cm Height: 7.6 cm
Length: 18 cm Length: 20 cm
• Wiring: “normally-open” or “normally-closed”
• Time to turn off irrigation system: 2 to 5 minutes approx. for Quick Response
• Time to reset Quick Response: 4 hours approx. under dry, sunny conditions
• Time to reset when fully wet: 3 days approx. under dry, sunny conditions
• Switch rating: 24 VAC, 3 A
• Freeze sensor shuts system off when temperatures fall below 3° C
(Rain/Freeze-Clik model)
• System operating frequency: 433 MHz (wireless model)
• Communication range up to 240 m line of sight (wireless model)
• Receiver input power: 24 VAC (from controller)
SENSORS

APPROVALS
• UL listed, FCC approved, cUL, CSA, CE, suitable for use in Australia
WR-CLIK-R SGM
(Receiver) Optional gutter mount
Height: 8.3 cm
Length: 10 cm

RAIN-CLIK
Model Description
RAIN-CLIK Rain-Clik sensor
RFC Rain/Freeze-Clik sensor
WR-CLIK Wireless Rain-Clik system
WR-CLIK-TR Wireless Rain-Clik Transmitter (only)
WRF-CLIK Wireless Rain/Freeze-Clik system
WR-CLIK-R Wireless Rain Receiver (only)

USER INSTALLED OPTION

(SPECIFY SEPARATELY FROM CONTROLLER)
Model Description
SGM Optional gutter mount (included in the WRF-CLIK)

124 Visit hunterindustries.com

SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

MINI-CLIK® Sensor: Rain

FEATURES
• Easily installs on any automatic irrigation system
• Debris tolerant for reliable operation and no unnecessary shutdowns
• Can be set to shut system off from 3 mm to 25 mm of rainfall
• Includes 7.6 m of 0.5 mm2 sheathed, two-conductor, UL-approved wire
• Optional user-installed metal gutter mount for Mini-Clik (order SGM,
Includes Mini-Clik)
• Warranty period: 5 years

SPECIFICATIONS MINI-CLIK SG-MC

Height: 5 cm Stainless steel sensor guard
• Switch rating: 24 VAC, 5 A Length: 15 cm enclosure for Mini-Clik.
• Wiring: 0.5 mm2 , typically interrupts the common Includes Mini-Clik.
ground wire between the solenoid valves and controller

MINI-CLIK®
Model Description
MINI-CLIK Rain Sensor
MINI-CLIK-NO Rain Sensor with “normally-open” switch SGM
MINI-CLIK-C Rain Sensor with conduit mount Optional gutter mount

SENSORS
MINI-CLIK-HV Rain Sensor for high voltage application (120/230 VAC)

USER INSTALLED OPTIONS (Specify Separately)

FREEZE-CLIK®
Model Description
Sensor: Freeze
SGM Optional Gutter Mount
SG-MC Stainless Steel Sensor Guard Enclosure for Mini-Clik

FEATURES
• Installs easily with no adjustment needed
• Accurate temperature sensing shuts system off when air
temperature reaches 3° C
• Used with other sensors to enhance overall efficiency of irrigation systems
• Warranty period: 5 years

SPECIFICATIONS
• Switch rating: 24 VAC, 5 A
• Wiring: Typically interrupts the common ground wire between FREEZE-CLIK
the solenoid valves and the controller Height: 5 cm
• UL listed Length: 11 cm

• Not intended for agricultural applications

FREEZE-CLIK®
Model Description
Freeze sensor interrupts irrigation when
FREEZE-CLIK
temperatures drop below 3° C
Freeze sensor allows irrigation when
FREEZE-CLIK REV
temperatures drop below 3° C

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 125

 SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

MINI WEATHER Sensor: Wind, Rain, Freeze

STATION
FEATURES
• Compact sensor that monitors wind, rain, freezing temperatures,
and shuts the irrigation system off as weather conditions require
• Installs easily on any automatic irrigation system
• Set wind speed shutdown from 19 to 56 km/hr
• Set rain shutdown from 3 mm to 25 mm of rainfall
• Automatically shuts off system when temperatures fall below 3° C
• Warranty period: 5 years

MWS-FR
SPECIFICATIONS Height: 20 cm
• Electrical rating: 24 VAC, 5 A maximum Wind Vane Diameter: 13 cm
• Wind vane diameter: 13 cm
• Wind speed adjustments: Actuation speed: 19 to 56 km/hr
• Reset speed: 13 to 39 km/hr
• Mounts: Slip fits over 55 mm PVC pipe or attaches to 1 cm conduit
with adapter (supplied with unit)
MINI WEATHER STATION
Model Description
MWS Weather station combines wind and rain
Weather station combines wind and rain
MWS-FR
sensors with a freeze sensor
SENSORS

WIND-CLIK® Sensor: Wind

FEATURES
• Adjusts to activate and reset at various wind speeds
• Wiring: normally-closed or normally-open
• Works with fountain systems to eliminate overspray in windy conditions
• Wind sensor interrupts/returns irrigation when programmed wind
speed is measured
• Warranty period: 5 years

SPECIFICATIONS
• Switch rating: 24 VAC, 5 A maximum
WIND-CLIK
• Wind speed adjustment Height: 10 cm
• Actuation speed: 19 to 56 km/hr Wind Vane Diameter: 13 cm
• Reset speed: 13 to 39 km/hr
• Mounts: Slip fits over 50 mm PVC pipe or attaches to 1 cm conduit with
adapter (supplied with unit)

126 Visit hunterindustries.com

SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

FLOW-CLIK® Sensor: Flow

FEATURES
• Automatically shuts down system if an overflow condition occurs
• Helps protect from flooding damage and erosion
• Calibration for precise system control: Single button allows each system to be
programmed at a specified flow level
• Works with most Hunter and most non-Hunter controllers
• Multi-colour LED provides system status to display when power is applied and
indicates if flow is within limits
• Compatible with most commercial and residential piping systems: Large flow
range provides complete flexibility
• One button system calibration to set highest flow zone
• Warranty period: 5 years

SPECIFICATIONS Flow-Clik sensor and module shown with

receptacle tees
• Flow-Clik Interface Panel: 90 cm leads provided for easy wiring to controller
(2 wires to controller, 24 VAC terminals and 2 wires to sensor and terminals)
• Current draw: 24 VAC, 0.025 A
• Switching current: 2 A maximum
• Max. distance between interface panel and sensor: 300 m
• Sensor Wiring: 2 x direct burial, 0.82 mm2 or greater, colour-coded or marked
for polarity, up to 300 m from controller
• Programmable start up delay: 0 to 300 seconds

SENSORS
• Programmable interrupt period: 2 to 60 minutes

FLOW-CLIK® BSP ADAPTERS FOR FCT FITTINGS

Model Description Diameter Model
Standard kit for all 24 VAC controllers. Includes sensor and 1" (25 mm) 795700
FLOW-CLIK* 1½" (40 mm) 795800
interface module, sensor requires FCT for pipe installation
2" (50 mm) 241400
3" (80 mm) 477800
REQUIRED USER INSTALLED OPTION (SPECIFY SEPARATELY)
Model Description FLOW RANGE
FCT-100 1" (25 mm) Schedule 40 sensor receptacle tee Operating Range
Pipe
FCT-150 1½" (40 mm) Schedule 40 sensor receptacle tee Minimum Suggested Maximum*
Diameter
l/min m3/hr l/min m3/hr
FCT-158 1½" (40 mm) Schedule 80 sensor receptacle tee
1" (25 mm) 7.6 0.45 64 3.84
FCT-200 2" (50 mm) Schedule 40 sensor receptacle tee 1½" (40 mm) 19 1.14 132 8.0
FCT-208 2" (50 mm) Schedule 80 sensor receptacle tee 2" (50 mm) 37.8 2.26 208 12.5
3" (80 mm) 106 6.36 450 27.0
FCT-300 3" (80 mm) Schedule 40 sensor receptacle tee 4" (100 mm) 129 7.74 750 45.0
FCT-308 3" (80 mm) Schedule 80 sensor receptacle tee
Notes:
FCT-400 4" (100 mm) Schedule 40 sensor receptacle tee * Good design practice dictates the maximum
flow not to exceed 1.5 m/sec. Suggested maximum
Notes:
flow is based upon Class 200 IPS plastic pipe.
* FCT for pipe installation sold separately

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 127

 SOLAR SYNC® SOIL-CLIK™ RAIN-CLIK® MINI-CLIK® FREEZE-CLIK® MWS WIND-CLIK® FLOW-CLIK® FLOW-SYNC®

FLOW-SYNC® Sensor: Flow

FEATURES
• Simple two-wire connection to ACC and I-Core® controllers
(up to 300 m)
• Feeds flow data (gallons or liters) to controller, for flow recording
and monitoring purposes
• Robust waterproof construction
• Provides station level flow monitoring for reaction to high
or low flow conditions
• Helps prevent damage and waste from leaks and breaks in
piping system

Impeller-type flow meter, requires FCT for pipe

SPECIFICATIONS installation (sold separately)
• Recommended pressure range: 1.5 to 15.0 bar; 150 to 1500 kPa
• Pressure Loss: < 0.009 bar; 0.9 kPa
• Wiring: 2 x direct burial, 0.82 mm2 or greater, colour-coded or marked for
polarity, up to 300 m from controller.
SENSORS

FLOW-SYNC BSP ADAPTERS FOR FCT FITTINGS

Model Description Diameter Model
Flow-Sync sensor, use with ACC and I-Core controllers, sensor requires 1" (25 mm) 795700
HFS* 1½" (40 mm) 795800
FCT for pipe installation
2" (50 mm) 241400
3" (80 mm) 477800
REQUIRED USER INSTALLED OPTION (SPECIFY SEPARATELY)
Model Description FLOW RANGE
FCT-100 1" (25 mm) Schedule 40 sensor receptacle tee Operating Range
Pipe
FCT-150 1½" (40 mm) Schedule 40 sensor receptacle tee Minimum Suggested Maximum*
Diameter
l/min m3/hr l/min m3/hr
FCT-158 1½" (40 mm) Schedule 80 sensor receptacle tee
1" (25 mm) 7.6 0.45 64 3.84
FCT-200 2" (50 mm) Schedule 40 sensor receptacle tee 1½" (40 mm) 19 1.14 132 8.0
FCT-208 2" (50 mm) Schedule 80 sensor receptacle tee 2" (50 mm) 37.8 2.26 208 12.5
3" (80 mm) 106 6.36 450 27.0
FCT-300 3" (80 mm) Schedule 40 sensor receptacle tee 4" (100 mm) 129 7.74 750 45.0
FCT-308 3" (80 mm) Schedule 80 sensor receptacle tee
Notes:
FCT-400 4" (100 mm) Schedule 40 sensor receptacle tee * Good design practice dictates the maximum
flow not to exceed 1.5 m/sec. Suggested maximum
Notes: flow is based upon Class 200 IPS plastic pipe.
* FCT for pipe installation sold separately

128 Visit hunterindustries.com

 Solar Sync®
Above

+
Soil-Clik™
Below

SENSORS
BUILT TO RESPOND
The Ultimate Environmental Solution
ABOVE & BELOW

Get the whole picture with the latest advances in water-saving technology. Pair our new
Soil-Clik moisture sensor with Solar Sync to measure both soil and climate conditions.
Soil-Clik won’t allow watering on days that don’t need it, or on wet turf; Solar Sync will use
ET to adjust application amounts when irrigation is needed. Together they’re the ultimate
environmentally responsive solution.

129
 130
MICRO
 MICRO
SECTION 07:
MICRO

131
 ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

ECO-MAT® & PLD-ESD Flow: 2.2 l/hr

FEATURES
• Fleece irrigation mat with fleece-wrapped PLD tubing (ECO-MAT)
• Fleece-wrapped PLD tubing (PLD-ESD)
• 2.2 l/hr; 0.13 m3/hr pressure compensating, check valve emitter
• Water holding capacity of 2 litres per square metre
• 30 cm emitter spacing, 35 cm row spacing
• 0.80 m width x 100 m roll length (ECO-MAT 16 mm)
• 0.80 m width x 90 m roll length (ECO-MAT 17 mm)
• 100 m roll (PLD-ESD 16 mm)
• 76 m roll (PLD-ESD 17 mm) ECO-MAT
• Recommended for use with all Hunter Drip Control Zone Kits ECO-MAT is a polypropylene fleece-wrapped sub-surface
micro irrigation product consisting of fleece-wrapped inline
• Warranty period: 5 years
emitter (PLD) tubing with 2.2 l/hr emitters with 30 cm
spacing attached to a sheet of fleece. Both 17 mm (North
OPERATING SPECIFICATIONS America) and 16 mm (International) models are available.
Specifically designed for turf applications.
• Pressure compensating, check valve emitters
• Operating pressure 1.0 to 3.5 bar, 100 to 350 kPa
• Compatible with 16 mm and 17 mm insert barb fittings
• Recommended filtration 120 mesh
• Recommended installation depth range 10 cm to 30 cm

PLD-ESD
PLD-ESD a polypropylene fleece-wrapped subsurface micro
irrigation product consisting of fleece-wrapped inline emitter
MICRO

(PLD) tubing with 2.2 l/hr emitters with 30 cm spacing. Both

17 mm (North America) and 16 mm (International) models are
available. Designed for narrow landscaped areas, dense
plantings, or small turf applications.

ECO-MAT TECHNICAL SPECIFICATIONS

Model Flow & Roll Width m2 Operating Minimum Tubing Row Spacing
Spacing Length Pressure Filtration
ECO-MAT 16 mm 2.2 l/hr 100 m 0.80 m 80 1.0 to 3.5 bar 100 to 350 kPa 120 mesh/125 micron 35 cm
PLD-ESD 16 mm 2.2 l/hr 100 m N/A N/A 1.0 to 3.5 bar 100 to 350 kPa 120 mesh/125 micron N/A
ECO-MAT 17 mm 2.3 l/hr 90 m 0.80 m 60 1.0 to 3.5 bar 100 to 350 kPa 120 mesh/125 micron 35 cm
PLD-ESD 17 mm 2.3 l/hr 76 m N/A N/A 1.0 to 3.5 bar 100 to 350 kPa 120 mesh/125 micron N/A

132 Visit hunterindustries.com

ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

0.8
th 0
ng m
l le wi
rol dth
0m
10

ECO-MAT
The ECO-MAT is composed of Hunter’s specialised
fleece-wrapped drip tubing (PLD-ESD) and root
zone irrigation mat made of polypropylene fleece.

PLD-ESD
The PLD-ESD provides enhanced lateral water
movement, which is dramatically more efficient
than unwrapped drip tubing where water is
drawn downward into the ground. Length A and
Wicking action
row spacing B are dependent on design and
site conditions.

Soil capillary
action

MICRO
Installation depth guidelines (below)
The ECO-MAT should be installed just below the optimal root
depth to efficiently deliver water to a variety of turfs, plants,
and shrubs.
Note: ECO-MAT is not intended for the irrigation of trees.

10-15 cm
20 cm

30 cm

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 133

 ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

PLD-16 MM Flow: 2.2, 3.8 l/hr

FEATURES
PLD & PLD Fittings
• In-line pressure-compensating emitters provide consistent
high-quality performance
• Built-in check valve prevents emitter clogging and wasteful runoff
-- Emitter check height 1.5 m
• Available emitter spacing of 30 cm and 50 cm
• Emitter flow rates available in 2.2 l/hr and 3.8 l/hr
• Available in 100 m, 200 m, and 400 m rolls
• Superior flexibility and kink resistance
• Works with Drip Zone Control Kits
• Warranty period: 5 years (including 2 additional years for
environmental stress cracking)

FITTING FEATURES PLD PLD-CPL-16

16 mm Barb x Barb
• Quick and easy connections without using tools or glue
• Handles pressures up to 3.5 bar; 350 kPa
• UV resistant

OPERATING SPECIFICATIONS
• Pressure compensating, non-draining emitters
• Operating pressure range: 1.0 to 3.5 bar; 100 to 350 kPa
PLD-050-16 PLD-ELB-16
• Recommended filtration: 120 mesh ½" (12 mm) MPT x 16 mm 16 mm Barb x
• Accepts 16 mm insert fittings Barb Barb Elbow

* Precipitation Rate and Maximum Line Length information

MICRO

found on page 196

PLD-TEE-16 PLD-BV-16
16 mm Barb x Barb Tee 16 mm Barb x Barb Ball
Valve

PLD – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 PLD INSERT FITTINGS

1 Model 2 Spacing 3 Length Model Description

PLD-22 = 2.2 l/hr Flow 30 cm 100 m PLD-CPL-16 16 mm Barb x Barb

PLD-38 = 3.8 l/hr Flow 50 cm 200 m PLD-050-16 ½" MPT x 16 mm Barb
400 m PLD-ELB-16 16 mm Barb x Barb Elbow
PLD-TEE-16 16 mm Barb x Barb Tee
Examples:
PLD-22 - 30 - 100 = 2.2 l/hr landscape dripline with 30 cm spacing in a 100 m roll PLD-BV-16 16 mm Barb x Barb Ball Valve
PLD-22 - 50 - 200 = 2.2 l/hr landscape dripline with 50 cm spacing in a 200 m roll
PLD-38 - 50 - 400 = 3.8 l/hr landscape dripline with 50 cm spacing in a 400 m roll

134 Visit hunterindustries.com

ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

PLD-17 MM Flow: 1.4, 2.3, 3.8 l/hr

FEATURES
PLD & PLD Fittings
• In-line pressure-compensating emitters provide consistent
high-quality performance
• Built-in check valve prevents emitter clogging and wasteful runoff
-- Emitter check height 1.5 m
• Available emitter spacing of 30 cm, 45 cm, or 60 cm
• Emitter flow rates available in 1.4, 2.3, 3.8 l/hr
• Blank tubing available (no emitters)
• Available in 30 m, 75 m and 300 m rolls
• Superior flexibility and kink resistance
• Works with Drip Zone Control Kits
• 30 m rolls available in models PLD 0612100, PLD 1012100, and PLD 1018100
• Warranty period: 5 years (including 2 additional years for environmental
PLD PLD-050
stress cracking) ½" MPT x 17 mm Barb

FITTING FEATURES
• Quick and easy connections without using tools or glue
• Same colour as original PLD drip line for a perfect blend under mulch
• Handles pressures up to 3.5 bar; 350 kPa
• UV resistant PLD-075 PLD-CPL
¾" MPT x 17 mm Barb 17 mm Barb x Barb
Coupling
OPERATING SPECIFICATIONS
• Pressure compensating, non-draining emitters
• Operating pressure range: 1.0 to 3.5 bar; 100 to 350 kPa
• Recommended filtration: 120 mesh

MICRO
• Accepts 17 mm insert fittings

PLD – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

PLD-ELB PLD-TEE
1 Model 2 Spacing 3 Length 4 Options 17 mm Barb x Barb 90° 17 mm Barb x Barb Tee
PLD-04 = 1.4 l/hr Flow 12 = 30 cm 100 = 30 m* (blank) = Female NPT Elbow

PLD-06 = 2.3 l/hr Flow 18 = 45 cm 250 = 75 m R = Reclaimed

PLD-10 = 3.8 l/hr Flow 24 = 60 cm 1K = 300 m (available in 2.3 and 3.8
l/hr models only)
PLD-BLNK = Blank
Example:
PLD-04 - 12 - 250 = 1.4 l/hr landscape dripline with 30 cm spacing in a 75 m roll

* = 30 m rolls available only in models PLD-BLNK-100, PLD-06-12-100, PLD-10-12-100, PLD-CAP PLD-BV

and PLD-10-18-100 17 mm Barb x ½" MPT 17 mm Barb x Barb
with Cap Shut-off Valve
PLD INSERT FITTINGS
Model Description
PLD-050 Barb to ½" MPT Adapter
PLD-075 Barb to ¾" MPT Adapter
PLD-CPL Barb to Barb Coupling
PLD-ELB Barb to Barb, 90° Elbow PLD-075-TBTEE PLD-AVR
PLD-TEE Barb Tee 17 mm Barb Tee x ½" Air/Vacuum Relief Valve
¾" Thread
PLD-CAP Barb to End Cap
PLD-BV Barb Valve
* Precipitation Rate and Maximum Line Length
PLD-075-TBTEE ¾" FPT x 17 mm Barb Tee
charts on page 196
PLD-AVR Air Relief Valve

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 135

 ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

POINT SOURCE Flow: 2, 4, 8, 15, 23 l/hr

EMITTERS
FEATURES
EMITTER MODEL CHART
• Slowly delivers water right to the plant
Model Inlet Type Flow (l/hr)
• Available in three convenient styles
• Pressure compensating from 1.0 to 3.5 bar; 100 to 350 kPa Self-
• Flow labeled in imperial and metric units Blue HE-050-B piercing 2.0
• Assembled in the USA Barb
• Optional diffuser cap available
• Barb emitters can be inserted into ½" and ¼" tubing without Self-
tools for fast installation Black HE-10-B piercing 4.0
Barb
• Colour-coded inlet: Models are colour-coded by flow rate
for fast identification
Self-
• Coined edge for easy installation: Ribbed edges provide
Red HE-20-B piercing 8.0
easy tool-free installation
Barb
• Array of flow rates: With flow rates ranging from
2.0 to 23.0 l/hr, plants can get the right amount of water
Self-
from a single emitter
Tan HE-40-B piercing 15.0
Barb
OPERATING SPECIFICATIONS
• Pressure compensating 1.0 to 3.5 bar; 100 to 350 kPa Self-
Orange HE-60-B piercing 23.0
Barb

POINT SOURCE EMITTERS – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 10/32"

Blue HE-050-T 2.0
1 Model 2 Flow Rate 3 Inlet 4 Qty./Bag Thread

HE 2, 4, 8, 15, 23 l/hr B = Self-piercing Barb 25/100

MICRO

T = 10/32 Threaded 25/100 10/32"

Black HE-10-T 4.0
HEB 4, 8 l/hr ½" Female Thread 25 Thread
HE Diff = Diffuser/Bug Cap Snap Fit 50

10/32"
Red HE-20-T 8.0
Thread

Point Source Emitters 10/32"

Tan HE-40-T 15.0
Thread

10/32"
Orange HE-60-T 23.0
Thread

½" Female
Black HEB-10 4.0
Thread

½" Female
Red HEB-20 8.0
Thread

Diffuser Cap
Gently distributes water at higher flows and
protects the emitter outlet from clogging.

136 Visit hunterindustries.com

ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

MICRO SPRAYS Uses: Precise Area Watering

SOLO-DRIP
• Eight streams of water for accurate watering
SOLO-DRIP
• Fingertip cap control for flow and radius adjustment
• Operating specifications: 1.0 to 2.5 bar; 100 to 250 kPa
• Dimensions:
[A] SD-T: 2.4 cm H x 2.0 cm W x 1.6 cm D
[B] SD-B: 2.4 cm H x 2.0 cm W x 1.6 cm D
[C] SD-B-STK: 15.2 cm H x 4.3 cm W x 1.6 cm D

HALO-SPRAY
[A] [B] [C]
• Large diameter, umbrella of water
• Adjust radius as needed
• Combine several for a “blanket” of water
• Operating specifications: 1.0 to 2.5 bar; 100 to 250 kPa HALO-SPRAY
• Dimensions:
[A] HS-T: 2.4 cm H x 2.0 cm W x 1.6 cm D
[B] HS-B: 2.4 cm H x 2.0 cm W x 1.6 cm D
[C] HS-B-STK: 15.2 cm H x 4.3 cm W x 1.6 cm D

TRIO-SPRAY
• Full-, half-, and quarter-circle configurations
• Functions like big sprays on a micro level
• Control knob for specific adjustment
[A] [B] [C]
• Operating specifications: 0.5 to 2.5 bar; 50 to 250 kPa
• Dimensions:
[A] TS-F: 3.8 cm H x 2.3 cm W x 1.5 cm D

MICRO
[B] TS-H: 3.8 cm H x 2.3 cm W x 1.5 cm D
[C] TS-Q: 3.8 cm H x 2.3 cm W x 1.5 cm D

TRIO-SPRAY
SOLO-DRIP PERFORMANCE DATA
Pressure Flow Throw
bar l/hr Diameter (m)
1.0 0 - 40 0 - 0.5
1.5 0 - 50 0 - 0.6
2.0 0 - 60 0 - 0.8
Note: Adjustable to Maximum (approx. 20 clicks)

HALO-SPRAY PERFORMANCE DATA [A] [B] [C]

Pressure Flow Throw

bar l/hr Diameter (m)
1.0 0 - 52 0 - 1.7
MICRO SPRAY MODELS
1.5 0 - 65 0 - 2.8
2.0 0 - 74 0 - 3.4 Model Description
Note: Adjustable to Maximum (approx. 14 clicks) SD-T Solo-Drip with 10-32 Threads, 360°
SD-B Solo-Drip with Barb, 360°
TRIO-SPRAY PERFORMANCE DATA SD-B-STK Solo-Drip with Barb with stake, 360°

Pressure Flow Spray Pattern (m) HS-T Halo-Spray with 10-32 Threads, 360°
bar l/hr Diameter in Throw Radius of Throw HS-B Halo-Spray with Barb, 360°
360° x 18 Hole 180° 90° HS-B-STK Halo-Spray with Barb with stake, 360°
0.5 0 - 54 0 - 5.0 0 - 2.0 0 - 1.5
TS-T-F Trio-Spray with 10-32 Threads, 360°
1.0 0 - 77 0 - 5.8 0 - 2.5 0 - 2.1
1.5 0 - 94 0 - 6.4 0 - 2.9 0 - 2.6 TS-T-H Trio-Spray with 10-32 Threads, 180°
2.0 0 - 105 0 - 7.0 0 - 3.2 0 - 3.0 TS-T-Q Trio-Spray with 10-32 Threads, 90°
2.5 0 - 119 0 - 7.5 0 - 3.5 0 - 3.3

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 137

 ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

DRIP CONTROL ZONE KITS

FEATURES
• Factory-assembled and water-tested
• Highest quality components (stainless steel filter screen, standard flush cap,
top-of-the-line regulator)
• Wide flow range to cover most micro irrigation applications

PCZ-101
• Pressure regulation: 1.7 or 2.8 bar; 170 or 280 kPa
• Flow: 2 to 55 l/min
• Operating pressure: 1.4 to 8.0 bar; 140 to 800 kPa
• Operating temperature: up to 66º C
• 150 mesh stainless steel screen PCZ-101
Height: 18 cm
Width: 7 cm
USER INSTALLED OPTIONS Length: 26 cm
25 mm female inlet x 20 mm female outlet
• Reclaimed water ID handle for PCZ-101 (P/N 269205)

SOLENOID OPERATING SPECIFICATIONS

• Heavy-duty solenoid 24 VAC
-- 350 mA inrush current, 190 mA holding current, 60 Hz
-- 370 mA inrush current, 210 mA holding current, 50 Hz

HFR-100, HFR-100-75, HFR-075

• Pressure regulation: 1.7 or 2.8 bar; 170 or 280 kPa
• Flow: 2 to 55 l/min
MICRO

• Operating pressure: 1.4 to 8.0 bar; 140 to 800 kPa

• Operating temperature: up to 66º C
• 150 mesh stainless steel screen HFR-100-075-25, HFR-100-075-40
Height: 18 cm
Width: 7 cm
HUNTER HYE FILTER Length: 18 cm
25 mm male NPT inlet x 20 mm female outlet
• Filter HY-100 1" (25 mm) male NPT
• Filter HY-100-075 1" (25 mm) male NPT inlet x ¾" male outlet
HFR-075-25, HFR-075-40
• Filter HY-075 ¾" male Height: 18 cm
Width: 7 cm
* PCZ performance chart found on page 197 Length: 18 cm
20 mm male NPT inlet x 20 mm female outlet

DRIP CONTROL ZONE KIT MODELS

Model Description
1" (25 mm) BSP PGV globe valve with 1" (25 mm) filter
PCZ-101 -25-B
system, and 1.7 bar regulator, ¾" outlet
1" (25 mm) BSP PGV globe valve with 1" (25 mm) filter
PCZ-101 -40-B
system, and 2.8 bar regulator, ¾" outlet

HUNTER FILTER REGULATOR KIT MODELS

Model Description
1" (25 mm) NPT filter system, and 1.7 bar; 170 kPa regulator,
HFR-100 -075-25
¾" outlet
1" (25 mm) NPT filter system, and 2.8 bar; 280 kPa regulator,
HFR-100 -075-40
¾" outlet HY-100, HY-100-75, HY-075
HFR-075-25 ¾" filter system, and 1.7 bar; 170 kPa regulator, ¾" outlet Height: 15 cm
Width: 7 cm
HFR-075-40 ¾" filter system, and 2.8 bar; 280 kPa regulator, ¾" outlet Length: 13 cm

138 Visit hunterindustries.com

ECO-MAT® PLD POINT SOURCE EMITTERS MICRO SPRAYS DRIP CONTROL ZONE KITS RZWS

RZWS
Size: 25, 45, 90 cm
Flow: 1.0 l/min or 2.0 l/min

FEATURES
• Built in Hunter Swing Joint for direct installation to ½" PVC fitting
• Patented StrataRoot™ baffles divert water to root zone while adding
strength to the unit
• Locking cap

DIMENSIONS
• 25 cm: 5.1 cm diameter x 25 cm length
• 45 cm: 7.6 cm diameter x 45 cm length
• 90 cm: 7.6 cm diameter x 90 cm length

OPERATING SPECIFICATIONS
• Bubbler flow rates: 1 l/min or 2 l/min
• Recommended pressure range: 1.0 to 4.8 bar; 100 to 480 kPa

FACTORY INSTALLED OPTIONS

• Check valve Standard and reclaimed Reclaimed models
models available available
• Locking reclaimed purple cap
Purple reclaimed cap spare
part (P/N RZWS-RCCAP for
45 cm and 90 cm models,
USER INSTALLED OPTIONS
P/N RZWS-10RCC for 25
• Sleeve: Fabric sleeve that helps prevent soil intrusion in sandy areas cm models)
(P/N RZWS-SLEEVE)
• Replacement cap 45 cm and 90 cm only (P/N RZWS-CAP)
• Locking reclaimed purple cap 45 cm and 90 cm only (P/N RZWS-RCCAP)

MICRO
ROOT ZONE
ROOT ZONE WATERING
WATERING SYSTEM
SYSTEM –– SPECIFICATION
SPECIFICATION BUILDER:
BUILDER: Order
Order 11 ++ 22 ++ 33

11 Model
Model 22 Bubbler
Bubbler Flow
Flow Rate
Rate 33 Options
Options
RZWS-10 == 25
RZWS-10 25 cm
cm Root
Root zone
zone watering
watering system
system 25 == 11 l/min
25 l/min (blank) == No
(blank) No option
option
RZWS-18 == 45
RZWS-18 45 cm
cm Root
Root zone
zone watering
watering system
system 50 == 22 l/min
50 l/min CV == Check
CV Check valve
valve
RZWS-36 == 90
RZWS-36 90 cm
cm Root
Root zone
zone watering
watering system
system R == Reclaimed
R Reclaimed cap
cap (excluding
(excluding RZWS-10
RZWS-10 models)
models)
CV-R == Check
CV-R Check valve
valve with
with reclaimed
reclaimed cap
cap
Examples:
Examples:
RZWS-18 -- 25
RZWS-18 25 -- CV
CV == 45
45 cm
cm Root
Root zone
zone watering
watering system
system at
at 11 l/min,
l/min, with
with check
check valve
valve
RZWS-10 -- 50
RZWS-10 50 -- RR == 25
25 cm
cm Root
Root zone
zone watering
watering system
system at
at 22 l/min,
l/min, with
with reclaimed
reclaimed cap
cap
RZWS-36 -- 25
RZWS-36 25 -- CV
CV == 90
90 cm
cm Root
Root zone
zone watering
watering system
system at
at 11 l/min,
l/min, with
with check
check valve
valve

ADDITIONAL OPTIONS
ADDITIONAL OPTIONS (SPECIFY
(SPECIFY SEPARATELY)
SEPARATELY) Root Zone Watering System
RZWS-SLEEVE == Field
RZWS-SLEEVE Field installed
installed sleeve
sleeve made
made from
from fifilter
lter fabric
fabric
RZWS-CAP == Replacement
RZWS-CAP Replacement cap
cap for
for 45
45 cm
cm and
and 90
90 cm
cm models
models
RZWS-10RCC == Reclaimed
RZWS-10RCC Reclaimed water
water replacement
replacement cap
cap for
for 25
25 cm
cm models
models
RZWS-RC-CAP == Reclaimed
RZWS-RC-CAP Reclaimed water
water replacement
replacement cap
cap for
for 45
45 cm
cm and
and 90
90 cm
cm models
models

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 139

 140
ACCESSORIES
SECTION 09:

ACCESSORIES
ACCESSORIES

141
 ACCESSORIES TOOLS GOLF TOOLS

ACCESSORIES
DBRY-6
Models
• DBRY100: Bulk 100 connectors
(100 tubes loose in box, plus inner box with 100 wire nuts)
• DBRY2X25: 25 x 2-packs
(2 tubes and wire nuts in a plastic bag, x 25 units)
Features
• UL Listed for 600 Volts direct burial Waterproof Wire Connectors
DBRY100, DBRY2X25
• Improved red-and-yellow wire nut, eliminating the need for two different sizes
• A snap-lock feature that secures the wire nut in the bottom of the light blue
waterproof tube
• 3 wire exit cutouts in the strain relief cap, to ease wire routing
• Meets Directive 2006/95/EC and IEC standards EN61984:2009,
EN60998- 1:2004, and EN60998-2-4:2005

HCV
Models
• HC-50F-50F: ½" Female inlet x ½" Female outlet
• HC-50F-50M: ½" Female inlet x ½" Male outlet
HCV
• HC-75F-75M: ¾" Female inlet x ¾" Male outlet Overall height: 7.5 cm
Features
• Adjustment access from top of valve
• Adjusts to compensate for elevational changes up to 11 m: Maximum flexibility
• Variety of inlet and outlet options: Reduces need for additional fittings
• Meets schedule 80 specifications: Durable under high pressure

HUNTER SPIRAL BARB ELBOWS

ACCESSORIES

Models
• HSBE-050: ½" male x spiral barb elbow
• HSBE-075: ¾" male x spiral barb elbow
Spiral Barb Elbows
• HSBE TOOL: Insert tool HSBE-TOOL, HSBE-050, HSBE-075
Features
• For use with FLEXSG Tubing
• Acetal material for sharp barbs
• Operating pressure up to 6.9 bar; 690 kPa
• Compatible with FLEXSG and other brands

FLEXSG TUBING
Models
• FLEXSG: 30 m roll
• FLEXSG-18: 45 cm pre-cut lengths
Features FLEXSG Tubing
30 m and 45 cm pre-cut lengths
• Engineered to resist kinking
• Inside diameter: 1.2 cm
• Operating pressure: up to 6.9 bar; 690 kPa
• Linear low-density polyethylene material

Pressure loss charts for HCV products on page 206

142 Visit hunterindustries.com

ACCESSORIES TOOLS GOLF TOOLS

ACCESSORIES
SJ SWING JOINT
Models
• SJ-506: ½" threaded x 15 cm length
• SJ-512: ½" threaded x 30 cm length
• SJ-7506: ½" x ¾" threaded x 15 cm length
• SJ-7512: ½" x ¾" threaded x 30 cm length
• SJ-706: ¾" threaded x 15 cm length
• SJ-712: ¾" threaded x 30 cm length
Features
• Unique leak-free swivel ells on both ends can be installed
in any position for maximum versatility
• Pressure rated to 10 bar; 1000 kPa

Pressure loss charts for SJ products are located on page 206

SPOTSHOT HOSE-END NOZZLE

SJ Swing Joint
Models 15 cm or 30 cm links
• ¾" Hose thread inlet – P/N 160700
• 1" (25 mm) Hose thread inlet – P/N 160705
Features
• Variable nozzle stream choices:
• Fan – Broad light stream for turf hot spots
• Soak – Medium stream for dust control areas
• Jet – Tight focused stream for power washing

OPERATING SPECIFICATIONS
• Flow – 132 l/min; 8 m3/hr at 5.5 bar; 551 kPa*

ACCESSORIES
* Not recommended for residential use with regulated, low pressure
or low flow conditions. SpotShot Hose-End Nozzle
¾" P/N 160700
1" P/N 160705

Jet Stream Nozzle Soak Stream Nozzle Fan Stream Nozzle

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 143

 ACCESSORIES TOOLS GOLF TOOLS

TOOLS

Hunter Wrench “T” Handle Tool Pitot Gauge Rotor Pressure Gauge
P/N 172000 P/N 053191 P/N 280100 P/N 129900
(works with PGP-ADJ only)

MP Gauge Assembly Hand Pump MP Tool Nozzle Insertion Collar

ACCESSORIES

P/N MPGAUGE P/N 460302 P/N MPTOOL P/N 123200

(For use with MP Rotators or stan-
dard nozzles)

Pocket Punch Hunter Emitter Multi-Tool ST1600 Tool

P/N POCKETPUNCH P/N HEMT P/N 517600
(Punches, inserts, and (Punches pilot holes and pellets,
removes emitters) inserts and removes emitters,
cuts tubing)

144 Visit hunterindustries.com

ACCESSORIES TOOLS GOLF TOOLS

GOLF TOOLS

Arc Adjustment/ Valve Insertion/Removal Tool Valve Insertion/Removal Tool Valve & Snap Ring
Riser Hold-up Tool P/N 604000 P/N 052805 Insertion/Removal Pliers
P/N 382800 G800 Series G900/G90 Series P/N 475600
G85B/G885 G800 Series

Valve Flushing Tool Snap Ring Removal Tool Nozzle Removal/

ACCESSORIES
P/N 609400 P/N 052510 Installation Tool
G800/G900 Series All Golf Models P/N 803700
G85B, G885 Short and
Mid-Range Nozzles

Visit hunterindustries.com RESIDENTIAL & COMMERCIAL IRRIGATION | Built on Innovation® 145

 146
GOLF ROTORS
SECTION 10:
GOLF IRRIGATION

GOLF ROTORS

147
 GOLF ROTORS
GOLF ROTORS

148
 GOLF ROTORS
ADVANCED FEATURES
GOLF IRRIGATION
THE G885 HAS POWER TO SPARE EASY ARC ADJUSTMENT WITH OR WITHOUT A TOOL

Boasting the highest torque output of With the G885, the arc is adjustable
any golf rotor on the market, the G885’s anytime; uninstalled, installed or
patented gear drive will push through while in operation. The convenient
anything that gets in its way. Try it adjustment ring can be rotated by
yourself and see. With just one rotation hand, or with the easy-to-use arc
of the turret by hand, you can clearly adjustment tool. This combination
feel this rotor’s formidable durability. tool can also be used as a means to
With such a powerful core, an array of hold the riser in the popped-up
efficient nozzles, and true full circle and position for nozzle changes.
part circle capabilities, the G885 is the
golf rotor you can always count on.

DUAL TRAJECTORY FLEXIBILITY CONTOUR “BACK-NOZZLE” CAPABILITY

Choose from the wide assortment of efficient wind-fighting
Whether you want a
22.5° standard trajectory nozzles, or the 15° low-angle
little extra green behind
trajectory nozzles. Either way, there is a perfect match for
your adjustable arc
your unique course conditions and problem-solving needs.
G885 rotors or a more
Regardless of the version you choose, changing nozzles is fast
“modeled” look to your
and easy with Hunter’s exclusive QuickChange technology.
fairway’s hard edges,
contour “Back-Nozzles”
are here to make your

GOLF ROTORS
vision a reality. They are also great for reducing water use
along perimeter housing areas and other unique situations
around the course. Choose from six short-range or seven
mid-range nozzles to suit your needs.

RATCHETING RISER WITH QUICKSET- PRIMARY NOZZLE ADAPTER

360 ADJUSTABILITY
Unique irrigation problems exist
Setting up your adjustable arc G885 on nearly every golf course. This
is fast and simple. The integrated is especially true in tight, hard-to-
ratcheting mechanism allows a simple irrigate areas. The G885 primary
twist of the riser to align the right-side nozzle adapter can solve many of
reversing point. Then, the adjustment these problems quickly and easily
ring is used to quickly set the arc and by allowing you to mix and match
left-side reversing point. The G885 is nozzles to get the coverage
also easily convertible to a true non-reversing full circle rotor needed, or to plug the primary flow
with our exclusive QuickSet-360 feature. completely.

ALSO AVAILABLE, THE NEW G85B BLOCK ROTOR

If you’re looking for a cost-effective golf rotor with a wide-range of radius and feature capabilities, including a
recessed area for a yardage marker, the G85B block rotor is here. It includes all the great features of the G885
rotor at a fraction of the cost.

149
 TTS GOLF ROTORS
ADVANCED FEATURES
Total-Top-Service (TTS)

Access Everything Large and Flexible Yardage

Through the Top Marker Capabilities

The no-dig solution is Recessed area for placard

appreciated by golfers, markers; optional raised
management, and especially marker for popular engraved
the superintendent and paint-filled markers

Stage 2 Filtration
Patented Pilot Valve Freeze Two-Stage Filtration
Freeze Suppression
Technology Suppression Unit in Valve Circuitry

Patented FST technology Anti-contamination filters in

prevents freeze damage— Stage 1 Filtration pilot valve and inlet valve
another TTS exclusive protect critical valve-in-head
passages
GOLF ROTORS

Unitised Inlet Convenient Circular

Valve Assembly Flange Design

Easy one-step removal of Offset riser and compartment

rock screen, valve seat allows quick and easy
and valve assembly trimming around the rotor
with motorised equipment

Upper Snap Rings with Through-the-Top

Integrated Wiper Seal Servicing of
On-Off-Auto Selector
Protects rotor’s riser seal from
external contamination such Simple and inexpensive
as sand top-dressing to replace, should damage
occur

150
Through-the-Top
Solenoid Connections

Keeps wire splices

protected in valve-box
conditions with easy
solenoid servicing

Stainless Steel Seat

in Pilot Valve

Durable and corrosion-free,

helps prevent slow leaks and
weeping in the rotor

GOLF ROTORS
Concealed Adjustable
Pressure Regulation

Stored within the flange

compartment, prevents
accidental adjustments

Proudly Manufactured
in the USA

Hunter is the only leading

irrigation manufacturer
making golf rotors in the
United States of America

Made in the USA

151
 DIH GOLF ROTORS
ADVANCED FEATURES
Decoder-In-Head (DIH)

Decoders Are
Built Into Rotors

Perfect package to
complement decoder control
systems. All DIH rotors include
two DBR/Y-6 splice connectors

State-of-the-Art
Surge Suppression

Earth grounding is easily

added with the Pilot SG
surge protector
GOLF ROTORS

Individual Decoder
and Solenoid
Components Within
Flange Compartment

Isolated configuration
minimises maintenance
costs year after year and
into the future

Seamless No-Splice
Connection Between
Decoder and Solenoid

With no connectors,
maintains ongoing electrical
continuity and peace of mind

Made in the USA

152
New Two-Station DIH Decoders Are Housed
Rotor Option in the DIH Rotor’s Unique
Flange Compartment
Perfect cost-effective
solution for back-to-back Improves playability and
heads around greens eliminates hundreds of
unsightly decoder
enclosures course-wide

Program Decoders DIH Rotors Include All

from the Surface with the Unique Features and
No Disassembly Benefits of TTS Rotors

Simple, fast, and easy to When you can access

program before or after everything through the
installation with the top, you never have to

GOLF ROTORS
wireless ICD-HP touch the turf

Access Decoders Built Strong in the

Through the Top with United States of America
No Digging Required
Among the top three
Servicing is a breeze and irrigation manufacturers,
there’s no mess with TTS Hunter is the only one making
DIH rotors golf rotors in the USA

Durability, Efficiency,
and Reliability Housed
in the Industry’s First
TTS DIH Rotor

Peace of mind from the #1

producer of gear-driven
rotors in the world

153
 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Models: G990 & G995

G900 SERIES Radius: 22.3 to 31.4 m

Flow: 6.7 to 19.04 m3/hr; 111.7 to 317.2 l/min

FEATURES
• Models: • Nozzle range: #25 to #73
-- G990 – Full circle • Exclusive PressurePort™ nozzle
-- G995 – Adjustable arc (40°-360°) technology G990C
• Contour “Back-Nozzle” capabilities Pop-up height: 8 cm
• QuickCheck™ arc mechanism
Overall height: 34 cm
• Dual trajectory nozzle choices: • Water lubricated gear-drive Flange diameter: 19 cm
-- 8 standard trajectory (22.5°) ►► All TTS advanced features Female Inlet: 1½" ACME
-- 8 low angle trajectory (15°) ►► Decoder-In-Head (DIH) capable

OPERATING SPECIFICATIONS
• G990
-- Radius: 22.3 to 31.4 m
-- Flow: 6.93 to 18.92 m3/hr; 115.5 to 315.3 l/min
-- Pressure range: 5.5 to 8.3 bar; 550 to 830 kPa
• G995
-- Radius: 20.1 to 29.6 m
-- Flow: 6.7 to 19.04 m3/hr; 111.7 to 317.2 l/min
-- Pressure range: 5.5 to 8.3 bar; 550 to 830 kPa
• All TTS rotors are pressure rated at 10 bar; 1,000 kPa G995E
Pop-up height: 8 cm
Overall height: 34 cm
OPTIONS Flange diameter: 19 cm
• C – Check-O-Matic checks up to 8 m in elevation change and readily Female Inlet: 1½" ACME
converts to Normally-Open Hydraulic with through the top connections
• D – Decoder Valve-In-Head with all “E” specifications below*
• DD – Two-station Decoder Valve-In-Head with all “E” specifications below*
• E – Electric Valve-In-Head with adjustable pressure regulation, on-off-auto
selector, 210 mA (370 mA inrush) 50Hz; 190 mA (350 mA inrush) 60Hz
solenoid with captive plunger and internal downstream bleed

* All DIH rotors include two IBM DBRY-6 splices for connection to the 2-wire path.
GOLF ROTORS

See page 180 for critical recommendations on grounding DIH rotors.

► = TTS and DIH Advanced Features detailed on pages 150 and 152

G990 & G995 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 + 5

1 Model 2 Valve Options 3 Nozzle 4 Regulation* 5 Options

G990 = Full Circle C = Check-O-Matic* 25 to 73 = Installed G990 Nozzle* P8 = 80 PSI (nozzles 25 to 53) S = SSU*
D = Decoder Valve-In-Head P1 = 100 PSI (nozzles 53 to 73)
DD = Two-station Decoder Valve-In-Head P2 = 120 PSI (nozzle 73)
E = Electric Valve-In-Head
G995 = Adjustable Arc 40° - 360° C = Check-O-Matic* 25 to 73 = Installed G995 Nozzle* P8 = 80 PSI (nozzles 25 to 53) S = SSU*
D = Decoder Valve-In-Head P1 = 100 PSI (nozzles 53 to 73)
DD = Two-station Decoder Valve-In-Head P2 = 120 PSI (nozzle 73)
E = Electric Valve-In-Head

* Converts to N.O. Hydraulic Valve-In-Head * SSU = #25 or #53 * SSU = P8/#25 * Standard
P8/#53 Stocking Unit

Example:
G990 - E - 53 - P8 - S = G990 full circle electric valve-in-head, installed #53 nozzle, 80 PSI regulation, standard stocking unit model

154 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G990 NOZZLE PERFORMANCE DATA* G995 NOZZLE PERFORMANCE DATA* G900 NOZZLES

Nozzle Pressure Radius **

Flow Precip mm/hr Nozzle Pressure Radius **
Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
5.5 550 22.3 6.93 115.2 14.0 16.2 5.5 550 20.1 6.70 111.7 16.6 19.1
25 6.2 620 22.9 7.36 122.6 14.1 16.3 25 6.2 620 20.4 7.16 119.2 17.2 19.8
Lt. Blue 6.9 690 23.2 7.79 129.8 14.5 16.8 Lt. Blue 6.9 690 20.7 7.54 125.7 17.6 20.3 G990 & G995
7.6 760 23.8 8.29 138.2 14.7 16.9 7.6 760 21.0 8.09 134.8 18.3 21.1
8.3 830 24.1 8.72 145.4 15.0 17.4 8.3 830 21.0 8.52 142.0 19.3 22.2
G900 LOW-ANGLE
5.5 550 23.5 8.25 137.4 15.0 17.3 5.5 550 20.7 8.22 137.0 19.1 22.1
33 NOZZLES
33 6.2 620 23.8 8.72 145.4 15.4 17.8 6.2 620 21.0 8.68 144.6 19.6 22.7
Grey 6.9 690 24.4 9.22 153.7 15.5 17.9 Grey 6.9 690 21.3 9.18 152.9 20.2 23.3
7.6 760 24.7 9.70 161.6 15.9 18.4 7.6 760 21.6 9.68 161.3 20.7 23.9
8.3 830 25.0 10.20 170.0 16.3 18.9 8.3 830 21.9 10.18 169.6 21.1 24.4
5.5 550 24.4 9.22 153.7 15.5 17.9 5.5 550 21.9 9.22 153.7 19.1 22.1
38 6.2 620 25.0 9.75 162.4 15.6 18.0 38 6.2 620 22.3 9.77 162.8 19.7 22.8 G990 & G995**
Red 6.9 690 25.3 10.29 171.4 16.1 18.6 Red 6.9 690 22.9 10.31 171.9 19.7 22.8
7.6 760 25.9 10.84 180.6 16.1 18.6 7.6 760 23.2 10.81 180.2 20.1 23.3
** Low-angle nozzles
8.3 830 26.2 11.40 190.0 16.6 19.2 8.3 830 23.5 11.36 189.3 20.6 23.8 reduce radius by 15%
5.5 550 25.3 10.49 174.9 16.4 18.9 5.5 550 22.6 10.47 174.5 20.6 23.8
43 6.2 620 25.6 11.04 184.0 16.8 19.4 43 6.2 620 22.6 11.02 183.6 21.7 25.0
Dk. Brown 6.9 690 25.9 11.56 192.7 17.2 19.9 Dk. Brown 6.9 690 22.9 11.52 191.9 22.0 25.4
7.6 760 26.2 12.13 202.1 17.7 20.4 7.6 760 23.5 12.13 202.1 22.0 25.4
8.3 830 26.5 12.70 211.6 18.1 20.8 8.3 830 23.8 12.65 210.8 22.4 25.8
5.5 550 26.2 11.27 187.8 16.4 18.9 5.5 550 23.5 11.40 190.0 20.7 23.9
48 6.2 620 27.1 11.93 198.7 16.2 18.7 48 6.2 620 24.1 11.95 199.1 20.6 23.8
Dk. Green 6.9 690 27.4 12.45 207.4 16.5 19.1 Dk. Green 6.9 690 24.7 12.52 208.6 20.5 23.7
7.6 760 27.7 13.02 216.9 16.9 19.5 7.6 760 25.0 13.06 217.7 20.9 24.1
8.3 830 28.0 13.52 225.2 17.2 19.8 8.3 830 25.3 13.74 229.0 21.5 24.8
5.5 550 27.1 12.31 205.2 16.7 19.3 5.5 550 24.7 12.47 207.8 20.5 23.6
53 6.2 620 27.4 12.88 214.6 17.1 19.8 53 6.2 620 25.6 12.99 216.5 19.8 22.9
Dk. Blue 6.9 690 28.0 13.45 224.1 17.1 19.7 Dk. Blue 6.9 690 26.2 13.52 225.2 19.7 22.7
7.6 760 28.3 14.02 233.6 17.4 20.1 7.6 760 26.5 14.11 235.1 20.1 23.2
8.3 830 28.7 14.58 243.0 17.8 20.5 8.3 830 26.8 14.63 243.8 20.3 23.5
5.5 550 28.0 14.36 23.92 18.3 21.1 5.5 550 26.2 14.15 235.8 20.6 23.8
63 6.2 620 28.7 14.97 249.5 18.2 21.1 63 6.2 620 26.8 14.88 247.9 20.7 23.9
Black 6.9 690 29.3 15.76 265.7 18.4 21.3 Black 6.9 690 27.4 15.67 261.2 20.8 24.0
7.6 760 29.6 16.36 272.5 18.7 21.6 7.6 760 27.7 16.33 272.2 21.2 24.5

GOLF ROTORS
8.3 830 29.9 17.01 283.5 19.1 22.0 8.3 830 28.0 16.97 282.8 21.6 24.9
5.5 550 29.3 16.38 272.9 19.1 22.1 5.5 550 27.1 16.51 275.2 22.4 25.9
73 6.2 620 29.9 17.04 283.9 19.1 22.0 73 6.2 620 27.7 17.13 285.4 22.3 25.7
Orange 6.9 690 30.2 17.67 297.5 19.4 22.4 Orange 6.9 690 28.3 17.74 295.6 22.1 25.5
7.6 760 31.1 18.29 304.7 18.9 21.8 7.6 760 29.0 18.38 306.2 21.9 25.3
8.3 830 31.4 18.92 315.3 19.2 22.2 8.3 830 29.6 19.04 317.2 21.8 25.1

* Complies to ASAE standard. All precipitation rates calculated

for 360° operation. All triangular rates are equilateral.
To calculate precipitation rates for 180° operation, multiply by 2.

Contour “Back-Nozzle” Capabilities

Choose any nozzle from the PGP, I-40, and G70 nozzle
racks, or from the short and mid-range G900 nozzles.

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 155

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Model: G880

G800 SERIES Radius: 20.4 to 26.8 m

Flow: 5.11 to 13.15 m3/hr; 85.2 to 219.2 l/min

FEATURES
• Model: G880 – Full circle
• Nozzle choices: 7 standard trajectory (25°)
• Nozzle range: #23 to #53 G880C
Pop-up height: 8 cm
• Exclusive PressurePort™ nozzle technology Overall height: 30 cm
• Water lubricated gear-drive Flange diameter: 18 cm
Female Inlet: 1½" ACME
►► All TTS advanced features
►► Decoder-In-Head (DIH) capable

OPERATING SPECIFICATIONS
• Radius: 20.4 to 26.8 m
• Flow: 5.11 to 13.15 m3/hr; 85.2 to 219.2 l/min
• Pressure range: 4.5 to 6.9 bar; 450 to 690 kPa
• All TTS rotors are pressure rated at 10 bar; 1,000 kPa

OPTIONS
• C – Check-O-Matic checks up to 8 m in elevation change and readily
converts to Normally-Open Hydraulic with through the top connections
G880E
• D – Decoder Valve-In-Head with all “E” specifications below* Pop-up height: 8 cm
• DD – Two-station Decoder Valve-In-Head with all “E” specifications below* Overall height: 30 cm
Flange diameter: 18 cm
• E – Electric Valve-In-Head with adjustable pressure regulation, on-off-auto Female Inlet: 1½" ACME
selector, 210 mA (370 mA inrush) 50Hz; 190 mA (350 mA inrush) 60Hz
solenoid with captive plunger and internal downstream bleed

* All DIH rotors include two IBM DBRY-6 splices for connection to the 2-wire
path. See page 180 for critical recommendations on grounding DIH rotors.

► = TTS and DIH Advanced Features detailed on pages 150 and 152
GOLF ROTORS

G880 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 + 5

1 Model 2 Valve Options 3 Nozzle 4 Regulation* 5 Options

G880 = Full Circle C = Check-O-Matic* 23 to 53 = Installed G880 Nozzle* P6 = 65 PSI (nozzles 23 and 25) S = SSU*
D = Decoder Valve-In-Head P8 = 80 PSI (nozzles 23 to 53)
DD = Two-station Decoder Valve-In-Head
E = Electric Valve-In-Head

* Converts to N.O. Hydraulic Valve-In-Head * SSU = #23, #25 or #48 * SSU = P6/#23, P6/#25 * Standard
P8/#25, P8/#48 Stocking Unit

Example:
G880 - E - 48 - P8 - S = G880 full circle electric valve-in-head, installed #48 nozzle, 80 PSI regulation, standard stocking unit model

156 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G880 NOZZLE PERFORMANCE DATA* G880 NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr

Bar kPa m m3/hr l/min
4.5 450 20.4 5.11 85.2 12.3 14.1
23 4.8 480 21.0 5.43 90.5 12.3 14.2
Green 5.5 550 21.6 5.91 98.4 12.6 14.6
6.2 620 21.9 6.34 105.6 13.2 15.2
6.9 690 22.3 6.77 112.8 13.7 15.8
4.5 450 21.6 6.54 109.0 14.0 16.1
25 4.8 480 22.3 6.79 113.2 13.7 15.8
Blue 5.5 550 22.6 7.29 121.5 14.3 16.5
6.2 620 22.9 7.79 129.8 14.9 17.2
6.9 690 23.2 8.18 136.3 15.2 17.6
4.5 450 22.3 7.04 117.3 14.2 16.4
33 4.8 480 22.6 7.31 121.9 14.4 16.6
Grey 5.5 550 23.2 7.88 131.4 14.7 17.0
6.2 620 23.5 8.40 140.1 15.3 17.6
6.9 690 23.8 8.81 146.9 15.6 18.0
4.5 450 23.2 7.97 132.9 14.9 17.2
38 4.8 480 23.5 8.25 137.4 15.0 17.3
Red 5.5 550 24.1 8.75 145.7 15.1 17.4
6.2 620 24.4 9.20 153.3 15.5 17.9
6.9 690 24.7 9.75 162.4 16.0 18.5
4.5 450 23.8 8.90 148.4 15.8 18.2
43 4.8 480 24.1 9.27 154.4 16.0 18.5
Dk. Brown 5.5 550 25.0 9.93 165.4 15.9 18.3
6.2 620 25.3 10.56 176.0 16.5 19.1
6.9 690 25.6 11.09 184.7 16.9 19.5
4.5 450 25.0 9.95 165.8 15.9 18.4
48 4.8 480 25.3 10.52 175.3 16.4 19.0
Dk. Green 5.5 550 25.9 11.13 185.5 16.6 19.1
6.2 620 26.2 11.79 196.5 17.2 19.8
6.9 690 26.5 12.36 205.9 17.6 20.3
4.5 450 25.3 10.65 177.5 16.6 19.2
53 4.8 480 25.6 11.15 185.9 17.0 19.6
Dk. Blue 5.5 550 26.5 11.95 199.1 17.0 19.6
6.2 620 26.8 12.45 207.4 17.3 20.0

GOLF ROTORS
6.9 690 26.8 13.15 219.2 18.3 21.1

* Complies to ASAE standard. All precipitation rates calculated

for 360˚ operation. All triangular rates are equilateral.

TTS EQUALS CONVENIENCE AND VERSATILITY

With TTS, every serviceable component of the rotor can be easily
accessed anytime with no servicing mess whatsoever.

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 157

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Model: G884

G800 SERIES Radius: 14.9 to 28.3 m

Flow: 3.28 to 13.24 m3/hr; 54.6 to 220.6 l/min

FEATURES
• Model: G884 – Full circle
• Dual trajectory colour-coded nozzles:
-- 10 standard trajectory (22.5°)
G884C
-- 9 low-angle trajectory (15°)
Pop-up height: 9.5 cm
• Nozzle range: #15 to #53 Overall height: 30 cm
• Exclusive PressurePort™ nozzle technology Flange diameter: 18 cm
Female Inlet: 1½" ACME
• Stainless steel riser
• Water lubricated gear-drive
►► All TTS advanced features
►► Decoder-In-Head (DIH) capable

OPERATING SPECIFICATIONS
• Radius: 14.9 to 28.3 m
• Flow: 3.28 to 13.24 m3/hr; 54.6 to 220.6 l/min
• Pressure range: 3.4 to 6.9 bar; 340 to 690 kPa
• All TTS rotors are pressure rated at 10 bar; 1000 kPa

OPTIONS G884E
Pop-up height: 9.5 cm
• C – Check-O-Matic checks up to 8 m in elevation change and readily Overall height: 30 cm
converts to Normally-Open Hydraulic with through the top connections Flange diameter: 18 cm
• D – Decoder Valve-In-Head with all “E” specifications below* Female Inlet: 1½" ACME
• DD – Two-station Decoder Valve-In-Head with all “E” specifications below*
• E – Electric Valve-In-Head with adjustable pressure regulation, on-off-auto
selector, 210 mA (370 mA inrush) 50Hz; 190 mA (350 mA inrush) 60Hz
solenoid with captive plunger and internal downstream bleed

* All DIH rotors include two IBM DBRY-6 splices for connection to the 2-wire
path. See page 180 for critical recommendations on grounding DIH rotors.

► = TTS and DIH Advanced Features detailed on pages 150 and 152
GOLF ROTORS

G884 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 + 5

1 Model 2 Valve Options 3 Nozzle 4 Regulation* 5 Options

G884 = Full Circle C = Check-O-Matic* 15 to 53 = Installed G880 Nozzle* P5 = 50 PSI (nozzles 15 to 18) S = SSU*
(convertible to forward- D = Decoder Valve-In-Head P6 = 65 PSI (nozzles 18 to 25)
facing adjustable arc rotor)
DD = Two-station Decoder Valve-In-Head P8 = 80 PSI (nozzles 25 to 35)
E = Electric Valve-In-Head
* Converts to N.O. Hydraulic Valve-In-Head * SSU = #18, #23, #25 or #48 * SSU = P5/#18, P6/#23 * Standard
P8/#25, P8/#48 Stocking Unit

Example:
G884 - E - 48 - P8 - S = G884 full circle electric valve-in-head, installed #48 nozzle, 80 PSI regulation, standard stocking unit model

158 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G884 NOZZLE PERFORMANCE DATA* G884 NOZZLES

Nozzle Set Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
3.4 340 14.9 3.28 54.6 14.7 17.0
Tan Grey 4.1 410 15.5 3.65 60.8 15.1 17.4
4.5 450 15.9 3.81 63.5 15.2 17.5
15 4.8 480 16.2 3.90 65.1 15.0 17.3
803611 White 315317 5.5 550 16.8 4.13 68.9 14.7 17.0
3.4 340 16.8 3.97 66.1 14.1 16.3
Tan Grey 4.1 410 17.1 4.28 71.3 14.7 17.0
4.5 450 17.4 4.45 74.1 14.7 17.0
18 4.8 480 18.0 4.66 77.6 14.4 16.6
803611 Orange 315317 5.5 550 18.6 4.94 82.4 14.3 16.5
3.4 340 17.4 3.91 65.2 13.0 15.0
Tan Grey 4.1 410 18.6 4.28 71.3 12.4 14.3
4.5 450 18.9 4.47 74.4 12.5 14.4
20 4.8 480 19.2 4.67 77.9 12.7 14.6
803611 Brown 315317 5.5 550 19.5 5.02 83.6 13.2 15.2
3.4 340 19.2 4.49 74.8 12.2 14.1
Tan Lt. Blue 4.1 410 19.8 4.99 83.2 12.7 14.7
4.5 450 20.1 5.19 86.5 12.8 14.8
23 4.8 480 20.4 5.41 90.1 13.0 15.0
803611 Green 315311 5.5 550 20.4 5.81 96.9 13.9 16.1
4.5 450 21.6 6.50 108.3 13.9 16.0
Tan Lt. Blue 4.8 480 22.3 6.75 112.5 13.6 15.7
5.5 550 22.6 7.19 119.8 14.1 16.3
25 6.2 620 22.9 7.65 127.5 14.6 16.9
803611 Blue 315311 6.9 690 22.9 8.12 135.3 15.5 17.9 G885 Decoder-In-Head TTS Rotor
4.5 450 22.3 7.02 117.0 14.2 16.4
Tan Lt. Blue 4.8 480 22.9 7.30 121.7 14.0 16.1
5.5 550 23.2 7.81 130.1 14.6 16.8
33 6.2 620 23.5 8.24 137.3 15.0 17.3 G885 TTS Rotor Spacious TTS Flange Compartment
803611 Grey 315311 6.9 690 24.1 8.65 144.1 14.9 17.2 All TTS rotors include ample room for solenoid splice
4.5 450 22.9 7.96 132.6 15.2 17.6 connections and a decoder module when needed.
Tan Lt. Blue 4.8 480 23.2 8.29 138.1 15.4 17.8
5.5 550 23.8 8.85 147.5 15.7 18.1
38 6.2 620 24.1 9.38 156.3 16.2 18.7
803611 Red 315311 6.9 690 25.0 9.87 164.4 15.8 18.2
- - - - - - -

GOLF ROTORS
Tan Blue - - - - - - -
5.5 550 25.3 9.85 164.1 15.4 17.8
43 6.2 620 25.9 10.52 175.3 15.7 18.1
803611 Dk. Brown 315300 6.9 690 26.5 11.04 183.9 15.7 18.1
- - - - - - -
Dk. Brown Dk. Blue - - - - - - -
5.5 550 25.9 10.88 181.2 16.2 18.7
48 6.2 620 27.1 11.46 191.0 15.6 18.0
803610 Dk. Green 833500 6.9 690 27.7 12.08 201.4 15.7 18.1
- - - - - - -
Dk. Brown Dk. Blue - - - - - - -
5.5 550 27.1 11.86 197.7 16.1 18.6
53 6.2 620 27.7 12.58 209.6 16.3 18.9
803610 Dk. Blue 833500 6.9 690 28.3 13.24 220.6 16.5 19.0
* Preliminary Performance Data. Complies to ASAE standard. All precipitation
rates calculated for 360° operation. All triangular rates are equilateral. To
calculate precipitation rates for 180° operation, multiply by 2.

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 159

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Model: G885

G800 SERIES Radius: 13.1 to 27.7 m

Flow: 1.86 to 13.06 m3/hr; 31.0 to 217.7 l/min

FEATURES
• Model: G885 – True full circle/adjustable part circle (60° to 360°)
• QuickCheck™ arc mechanism
• QuickSet-360 arc mechanism
G885C
• Dual trajectory colour-coded nozzles: Pop-up height: 9.5 cm
-- 12 standard trajectory (22.5°) Overall height: 30 cm
-- 9 low-angle trajectory (15°) Flange diameter: 18 cm
• Nozzle range: #10 to #53 Female Inlet: 1½" ACME

• Exclusive PressurePort™ nozzle technology

• Contour “Back-Nozzle” capabilities
• Ratcheting stainless steel riser
• Water lubricated gear-drive
►► All TTS advanced features
►► Decoder-In-Head (DIH) capable

OPERATING SPECIFICATIONS
• Radius: 13.1 to 27.7 m
• Flow: 1.86 to 13.06 m3/hr; 31.0 to 217.7 l/min
• Pressure range: 3.4 to 6.9 bar; 340 to 690 kPa G885E
• All TTS rotors are pressure rated at 10 bar; 1,000 kPa Pop-up height: 9.5 cm
Overall height: 30 cm
Flange diameter: 18 cm
OPTIONS Female Inlet: 1½" ACME

• C – Check-O-Matic checks up to 8 m in elevation change and readily

converts to Normally-Open Hydraulic with through the top connections
• D – Decoder Valve-In-Head with all “E” specifications below*
• DD – Two-station Decoder Valve-In-Head with all “E” specifications below*
• E – Electric Valve-In-Head with adjustable pressure regulation, on-off-auto
selector, 210 mA (370 mA inrush) 50Hz; 190 mA (350 mA inrush) 60Hz
solenoid with captive plunger and internal downstream bleed
GOLF ROTORS

* All DIH rotors include two IBM DBRY-6 splices for connection to the 2-wire
path. See page 180 for critical recommendations on grounding DIH rotors.

► = TTS and DIH Advanced Features detailed on pages 150 and 152

G885 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 + 5

1 Model 2 Valve Options 3 Nozzle 4 Regulation* 5 Options

G885 = Full/Part Circle C = Check-O-Matic* 10 to 53 = Installed G885 Nozzle* P5 = 50 PSI (nozzles 10 to 18) S = SSU*
60º-360º Arc Range
D = Decoder Valve-In-Head P6 = 65 PSI (nozzles 18 to 25)
DD = Two-station Decoder Valve-In-Head P8 = 80 PSI (nozzles 25 to 53)
E = Electric Valve-In-Head

* Converts to N.O. Hydraulic Valve-In-Head * SSU = #18, #23, #25 or #48 * SSU = P5/#18, P6/#23 * Standard Stocking
P8/#25, P8/#48 Unit

Example:
G885 - E - 48 - P8 - S = G885 full/part circle electric valve-in-head, installed #48 nozzle, 80 PSI regulation, standard stocking unit model

160 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G885 NOZZLE PERFORMANCE DATA* G885 STANDARD NOZZLES G885 LOW-ANGLE NOZZLES**

Nozzle Set Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
Orange Dk. Green 3.4 340 13.1 1.86 31.0 10.8 12.5
4.1 410 13.4 2.23 37.1 12.4 14.3
4.5 450 13.7 2.29 38.2 12.2 14.1
803603 10 315312 - - - - - - - ** Low-angle nozzles reduce radius by 15%
Lt. Green - - - - - - -
Orange White 3.4 340 14.6 2.66 44.3 12.4 14.3
4.1 410 15.2 2.91 48.5 12.5 14.5
4.5 450 15.5 3.04 50.7 12.6 14.5
803603 13 315314 - - - - - - -
Lt. Blue - - - - - - -
Orange White 3.4 340 15.9 3.02 50.3 12.0 13.9
4.1 410 16.2 3.34 55.6 12.8 14.8
4.5 450 16.5 3.45 57.5 12.7 14.7
803603 15 315314 - - - - - - -
White - - - - - - - Contour “Back-Nozzle” Capabilities
Orange Lt. Green 3.4 340 16.8 3.79 63.2 13.5 15.6 Whether you want a little extra green behind your adjustable-arc G885 rotors or
4.1 410 17.4 4.04 67.4 13.4 15.5 a more “modeled” look to your fairway’s hard edges, Contour “Back-Nozzles” are
4.5 450 17.7 4.13 68.9 13.2 15.3 here to make your vision a reality. Choose from four short-range or four mid-range
803603 18 315313 - - - - - - - nozzles to suit your needs.
Orange - - - - - - -
Orange Lt. Green 3.4 340 17.7 4.18 69.7 13.4 15.4
4.1 410 18.3 4.45 74.2 13.3 15.4
4.5 450 18.6 4.66 77.6 13.5 15.6 CONTOUR BACK-NOZZLE PERFORMANCE DATA
803603 20 315313 4.8 480 18.6 4.88 81.4 14.1 16.3
Tan 5.5 550 18.9 5.13 85.6 14.4 16.6
4.5 Bar 5.5 Bar
Orange Lt. Green 3.4 340 18.6 4.78 79.6 13.8 16.0 P/N Colour Profile Metres L/M Metres L/M
4.1 410 19.2 5.18 86.3 14.0 16.2
803604 Peach 7.6 12.9 8.2 14.8
4.5 450 19.8 5.43 90.5 13.8 16.0
803603 23 315313 4.8 480 20.1 5.86 97.7 14.5 16.7
803603 Orange 8.5 14.4 8.8 15.9
Green 5.5 550 20.4 6.34 105.6 15.2 17.5
Red Green 4.5 450 21.0 6.68 111.3 15.1 17.4
803602 Red 9.4 15.9 10.1 17.0
4.8 480 21.3 6.92 115.3 15.2 17.6
5.5 550 21.6 7.37 122.8 15.7 18.2
803602 25 315310 6.2 620 21.9 7.77 129.5 16.1 18.6
803601 Dk. Red 10.4 17.4 11.0 18.5

Blue 6.9 690 22.3 8.25 137.4 16.7 19.2

315314 White 11.3 10.6 11.6 11.0
Red Green - - - - - - -

GOLF ROTORS
- - - - - - - 315313 Lt. Green 12.8 16.3 13.4 17.8
5.5 550 22.3 7.83 130.4 15.8 18.3
803602 33 315310 6.2 620 22.6 8.34 138.9 16.4 18.9 315310 Green 14.0 19.7 14.6 21.6
Grey 6.9 690 23.2 8.75 145.7 16.3 18.8
Red Green - - - - - - - 315312 Dk. Green 14.9 29.9 15.5 33.3
- - - - - - -
5.5 550 24.1 8.94 149.0 15.4 17.8
803602 38 315310 6.2 620 24.1 9.36 156.0 16.1 18.6
Red 6.9 690 24.4 9.75 162.4 16.4 18.9 G885 CONTOUR BACK-NOZZLES
Red Green - - - - - - -
- - - - - - -
5.5 550 24.4 9.88 164.7 16.6 19.2
803602 43 315310 6.2 620 24.7 10.54 175.6 17.3 20.0
Dk. Brown 6.9 690 25.3 11.06 184.3 17.3 20.0 Arc adjustment
Dk. Red Dk. Green - - - - - - - and riser
- - - - - - - hold-up tool
5.5 550 25.9 11.20 186.6 16.7 19.3 6
803601 48 315312 6.2 620 26.2 11.86 197.6 17.3 19.9
Dk. Green 6.9 690 26.8 12.43 207.1 17.3 19.9
Dk. Red Dk. Green - - - - - - -
- - - - - - -
5.5 550 27.1 11.98 199.7 16.3 18.8
803601 53 315312 6.2 620 27.4 12.54 209.0 16.7 19.2
QuickSet-360 with Ratcheting Riser
Dk. Blue 6.9 690 27.7 13.06 217.7 17.0 19.6 Setting up your adjustable arc G885 is fast and simple. The integrated ratcheting
mechanism allows a simple twist of the riser to align the right-side reversing point.
= Nozzle plug P/N 315300 installed in the back side of the nozzle housing. The G885 is also easily convertible to a true non-reversing full circle rotor with our
exclusive QuickSet-360 feature.
* Complies to ASAE standard. All precipitation rates calculated for 360° opera-
tion. All triangular rates are equilateral. To calculate precipitation rates for 180°
operation, multiply by 2.

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 161

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Model: G835

G800 SERIES Radius: 5.5 to 15.2 m

Flow: 0.43 to 2.91 m3/hr; 7.2 to 48.5 l/min

FEATURES
• Model: G835: Full/Part circle (50º to 360°)
• QuickCheck™ arc mechanism G835C
• QuickSet-360 arc mechanism Pop-up height: 8 cm
• Nozzle choices: 8 multi-trajectory (15° to 25°) Overall height: 30 cm
Flange diameter: 18 cm
• Nozzle range: #2 to #12 Female Inlet: 1½" ACME
• Water lubricated gear-drive
►► All TTS advanced features
►► Decoder-In-Head (DIH) capable

OPERATING SPECIFICATIONS
• Radius: 5.5 to 15.2 m
• Flow: 0.43 to 2.91 m3/hr; 7.2 to 48.5 l/min
• Pressure range: 2.8 to 4.5 bar; 280 to 450 kPa
• All TTS rotors are pressure rated at 10 bar; 1,000 kPa

OPTIONS G835E
• C – Check-O-Matic checks up to 8 m in elevation change and readily Pop-up height: 8 cm
converts to Normally-Open Hydraulic with through the top connections Overall height: 30 cm
Flange diameter: 18 cm
• D – Decoder Valve-In-Head with all “E” specifications below* Female Inlet: 1½" ACME
• DD – Two-station Decoder Valve-In-Head with all “E” specifications below*
• E – Electric Valve-In-Head with adjustable pressure regulation, on-off-auto
selector, 210 mA (370 mA inrush) 50Hz; 190 mA (350 mA inrush) 60Hz
solenoid with captive plunger and internal downstream bleed

* All DIH rotors include two IBM DBRY-6 splices for connection to the 2-wire
path. See page 180 for critical recommendations on grounding DIH rotors.

► = TTS and DIH Advanced Features detailed on pages 150 and 152
GOLF ROTORS

G835 – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4 + 5

1 Model 2 Valve Options 3 Nozzle 4 Regulation* 5 Options

G835 = Full/Part Circle 50 to 360° C = Check-O-Matic * 6 = Installed G835 Nozzle * P5 = 50 PSI S = SSU *
includes 8-nozzle rack
D = Decoder Valve-in-Head P6 = 65 PSI
E = Electric Valve-in-Head
* Converts to N.O. Hydraulic * SSU = #6 * SSU = P5 * Standard Stocking Unit
Valve-in-Head

Examples:
G835E - 6 - P5 - S = G835 full/part-circle electric valve-in-head, installed #6 nozzle, 50 PSI regulation, standard stocking unit model

162 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G835 NOZZLE PERFORMANCE DATA* G835 NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
2.8 280 5.5 0.43 7.2 14.3 16.6
2 3.4 340 6.1 0.48 7.9 12.8 14.8
Yellow 4.1 410 6.7 0.55 9.1 12.1 14.0
4.5 450 7.0 0.59 9.8 12.0 13.9
2.8 280 7.0 0.68 11.4 13.9 16.0
3 3.4 340 7.6 0.73 21.1 12.5 14.5
Yellow 4.1 410 8.2 0.80 13.2 11.7 13.6
4.5 450 8.5 0.82 13.6 11.2 13.0
2.8 280 7.6 0.89 14.8 15.3 17.6
4 3.4 340 8.5 0.93 15.5 12.8 14.8
Yellow 4.1 410 9.1 1.00 16.7 12.0 13.8
4.5 450 9.4 1.04 17.4 11.7 13.5
2.8 280 8.8 1.07 17.8 13.7 15.8
5 3.4 340 9.8 1.14 18.9 11.9 13.8
Yellow 4.1 410 10.1 1.20 20.1 11.9 13.7
4.5 450 10.7 1.23 20.4 10.8 12.4
2.8 280 9.8 1.36 22.7 14.3 16.5
6 3.4 340 10.7 1.43 23.8 12.6 14.5
Yellow 4.1 410 11.3 1.50 25.0 11.8 13.6
4.5 450 11.9 1.54 25.7 10.9 12.6
2.8 280 11.0 1.77 29.5 14.7 17.0
8 3.4 340 11.9 1.82 30.3 12.9 14.8
Yellow 4.1 410 12.8 1.89 31.4 11.5 13.3
4.5 450 13.1 1.93 32.2 11.2 13.0
2.8 280 11.9 2.20 36.7 15.6 18.0
10 3.4 340 13.1 2.29 38.2 13.4 15.4
Yellow 4.1 410 13.7 2.34 39.0 12.4 14.4
4.5 450 14.3 2.39 39.7 11.6 13.4
2.8 280 13.4 2.73 45.4 15.2 17.5
12 3.4 340 14.3 2.77 46.2 13.5 15.6
Yellow 4.1 410 14.6 2.84 47.3 13.3 15.3
4.5 450 15.2 2.91 48.5 12.5 14.5

* Complies to ASAE standard. All precipitation rates calculated

GOLF ROTORS
for 360° operation. All triangular rates are equilateral. To
calculate precipitation rates for 180° operation, multiply by 2.

QuickSet-360
With Hunter’s QuickCheck arc mechanism and patented

in 1 QuickSet-360 non-reversing full-circle feature in a variable

arc rotor, adjustments are fast, easy and more flexible than
ever before. Now available on all B Series and G800 Series
adjustable arc rotors.

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 163

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Models: G80B

B SERIES Radius: 20.4 to 26.8 m

Flow: 5.11 to 13.15 m3/hr; 85.2 to 219.2 l/min

FEATURES
• Full circle opposing nozzles
• Colour-coded nozzles: 7 standard trajectory (25°)
• Nozzle range: #23 to #53 G80B
Pop-up height: 8 cm
• Exclusive PressurePort™ nozzle technology Overall height: 24.5 cm
• Water lubricated gear-drives Flange diameter: 13.7 cm
Female Inlet: 1¼" ACME
• Check height up to 3 m in elevation change

OPERATING SPECIFICATIONS
• Radius: 20.4 to 26.8 m
• Flow: 5.11 to 13.15 m3/hr; 85.2 to 219.2 l/min
• Pressure range: 4.5 to 6.9 bar; 450 to 690 kPa
• All B Series rotors are pressure rated at 10 bar; 1,000 kPa
GOLF ROTORS

G80B – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Valve Options 3 Nozzle 4 Options*

G80 = Full Circle B = Block rotor with check valve 23 to 53 = Installed G80 Nozzle* S = SSU*
* SSU = #23, #25 or #48 * Standard Stocking Unit

Example:
G80 - B - 25 - S = G80 full circle block rotor, installed #25 nozzle, standard stocking unit model

164 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G80B NOZZLE PERFORMANCE DATA* G80B NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
4.5 450 20.4 5.11 85.2 12.3 14.1
23 4.8 480 21.0 5.43 90.5 12.3 14.2
Green 5.5 550 21.6 5.91 98.4 12.6 14.6
6.2 620 21.9 6.34 105.6 13.2 15.2
6.9 690 22.3 6.77 112.8 13.7 15.8
4.5 450 21.6 6.54 109.0 14.0 16.1
25 4.8 480 22.3 6.79 113.2 13.7 15.8
Blue 5.5 550 22.6 7.29 121.5 14.3 16.5
6.2 620 22.9 7.79 129.8 14.9 17.2
6.9 690 23.2 8.18 136.3 15.2 17.6
4.5 450 22.3 7.04 117.3 14.2 16.4
33 4.8 480 22.6 7.31 121.9 14.4 16.6
Grey 5.5 550 23.2 7.88 131.4 14.7 17.0
6.2 620 23.5 8.40 140.1 15.3 17.6
6.9 690 23.8 8.81 146.9 15.6 18.0
4.5 450 23.2 7.97 132.9 14.9 17.2
38 4.8 480 23.5 8.25 137.4 15.0 17.3
Red 5.5 550 24.1 8.75 145.7 15.1 17.4
6.2 620 24.4 9.20 153.3 15.5 17.9
6.9 690 24.7 9.75 162.4 16.0 18.5
4.5 450 23.8 8.90 148.4 15.8 18.2
43 4.8 480 24.1 9.27 154.4 16.0 18.5
Dk. Brown 5.5 550 25.0 9.93 165.4 15.9 18.3
6.2 620 25.3 10.56 176.0 16.5 19.1
6.9 690 25.6 11.09 184.7 16.9 19.5
4.5 450 25.0 9.95 165.8 15.9 18.4
48 4.8 480 25.3 10.52 175.3 16.4 19.0
Dk. Green 5.5 550 25.9 11.13 185.5 16.6 19.1
6.2 620 26.2 11.79 196.5 17.2 19.8
6.9 690 26.5 12.36 205.9 17.6 20.3
4.5 450 25.3 10.65 177.5 16.6 19.2
53 4.8 480 25.6 11.15 185.9 17.0 19.6
Dk. Blue 5.5 550 26.5 11.95 199.1 17.0 19.6
6.2 620 26.8 12.45 207.4 17.3 20.0

GOLF ROTORS
6.9 690 26.8 13.15 219.2 18.3 21.1

* Complies to ASAE standard. All precipitation rates calculated

for 360° operation. All triangular rates are equilateral.

G80B

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 165

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Models: G84B & G85B

B SERIES Radius: 13.1 to 28.3 m

Flow: 1.86 to 13.24 m3/hr; 31.0 to 220.6 l/min

FEATURES
• Models:
-- G84B: Full circle opposing nozzles
-- G85B: True full circle/adjustable part circle (60° to 360°)
• QuickCheck™ arc mechanism (G85B) G84B
• QuickSet-360 arc mechanism (G85B) Pop-up height: 9.5 cm
Overall height: 24.5 cm
• Dual trajectory colour-coded nozzles: Flange diameter: 13.7 cm
-- G84B: 10 standard trajectory (22.5°) Female Inlet: 1¼" ACME
-- G85B: 12 standard trajectory (22.5°)
• G84B & G85B: 9 low-angle trajectory (15°)
• Nozzle range:
-- G84B: #15 to #53
-- G85B: #10 to #53
• Exclusive PressurePort™ nozzle technology
• Contour “Back-Nozzle” capabilities (G85B)
• Ratcheting stainless steel riser
• Water lubricated gear-drives
• Check height up to 3 m in elevation change

G85B
OPERATING SPECIFICATIONS Pop-up height: 9.5 cm
• G84B Overall height: 24.5 cm
Flange diameter: 13.7 cm
-- Radius: 14.9 to 28.3 m
Female Inlet: 1¼" ACME
-- Flow: 3.28 to 13.24 m3/hr; 54.6 to 220.6 l/min
-- Pressure range: 3.4 to 6.9 bar; 340 to 690 kPa
• G85B
-- Radius: 13.1 to 27.7 m
-- Flow: 1.86 to 13.06 m3/hr; 31,0 to 217.7 l/min
-- Pressure range: 3.4 to 6.9 bar; 340 to 690 kPa
• All B Series rotors are pressure rated at 10 bar; 1,000 kPa
GOLF ROTORS

G84B & G85B – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Valve Options 3 Nozzle 4 Options*

G84 = Full Circle B = Block rotor with check valve 15 to 53 = Installed G84 Nozzle* S = SSU*
* SSU = #18, #25 & #48 * Standard Stocking Unit
G85 = Full/Part Circle 60° - 360° B = Block rotor with check valve 10 to 53 = Installed G85 Nozzle** S = SSU*
* * SSU = #18, #25 & #48 * Standard Stocking Unit

Example:
G84 - B - 25 - S = G80 full circle block rotor, installed #25 nozzle, standard stocking unit model

166 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G84B NOZZLE PERFORMANCE DATA* G85B NOZZLE PERFORMANCE DATA

Nozzle Set Pressure Radius Flow Precip mm/hr Nozzle Set Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
3.4 340 14.9 3.28 54.6 14.7 17.0 Orange Dk. Green 3.4 340 13.1 1.86 31.0 10.8 12.5
Tan Grey 4.1 410 15.5 3.65 60.8 15.1 17.4 4.1 410 13.4 2.23 37.1 12.4 14.3
4.5 450 15.9 3.81 63.5 15.2 17.5 4.5 450 13.7 2.29 38.2 12.2 14.1
15 4.8 480 16.2 3.90 65.1 15.0 17.3 803603 10 315312 - - - - - - -
803611 White 315317 5.5 550 16.8 4.13 68.9 14.7 17.0 Lt. Green - - - - - - -
3.4 340 16.8 3.97 66.1 14.1 16.3 Orange White 3.4 340 14.6 2.66 44.3 12.4 14.3
Tan Grey 4.1 410 17.1 4.28 71.3 14.7 17.0 4.1 410 15.2 2.91 48.5 12.5 14.5
4.5 450 17.4 4.45 74.1 14.7 17.0 4.5 450 15.5 3.04 50.7 12.6 14.5
18 4.8 480 18.0 4.66 77.6 14.4 16.6 803603 13 315314 - - - - - - -
803611 Orange 315317 5.5 550 18.6 4.94 82.4 14.3 16.5 Lt. Blue - - - - - - -
3.4 340 17.4 3.91 65.2 13.0 15.0 Orange White 3.4 340 15.9 3.02 50.3 12.0 13.9
Tan Grey 4.1 410 18.6 4.28 71.3 12.4 14.3 4.1 410 16.2 3.34 55.6 12.8 14.8
4.5 450 18.9 4.47 74.4 12.5 14.4 4.5 450 16.5 3.45 57.5 12.7 14.7
20 4.8 480 19.2 4.67 77.9 12.7 14.6 803603 15 315314 - - - - - - -
803611 Brown 315317 5.5 550 19.5 5.02 83.6 13.2 15.2 White - - - - - - -
3.4 340 19.2 4.49 74.8 12.2 14.1 Orange Lt. Green 3.4 340 16.8 3.79 63.2 13.5 15.6
Tan Lt. Blue 4.1 410 19.8 4.99 83.2 12.7 14.7 4.1 410 17.4 4.04 67.4 13.4 15.5
4.5 450 20.1 5.19 86.5 12.8 14.8 4.5 450 17.7 4.13 68.9 13.2 15.3
23 4.8 480 20.4 5.41 90.1 13.0 15.0 803603 18 315313 - - - - - - -
803611 Green 315311 5.5 550 20.4 5.81 96.9 13.9 16.1 Orange - - - - - - -
4.5 450 21.6 6.50 108.3 13.9 16.0 Orange Lt. Green 3.4 340 17.7 4.18 69.7 13.4 15.4
Tan Lt. Blue 4.8 480 22.3 6.75 112.5 13.6 15.7 4.1 410 18.3 4.45 74.2 13.3 15.4
5.5 550 22.6 7.19 119.8 14.1 16.3 4.5 450 18.6 4.66 77.6 13.5 15.6
25 6.2 620 22.9 7.65 127.5 14.6 16.9 803603 20 315313 4.8 480 18.6 4.88 81.4 14.1 16.3
803611 Blue 315311 6.9 690 22.9 8.12 135.3 15.5 17.9 Tan 5.5 550 18.9 5.13 85.6 14.4 16.6
4.5 450 22.3 7.02 117.0 14.2 16.4 Orange Lt. Green 3.4 340 18.6 4.78 79.6 13.8 16.0
Tan Lt. Blue 4.8 480 22.9 7.30 121.7 14.0 16.1 4.1 410 19.2 5.18 86.3 14.0 16.2
5.5 550 23.2 7.81 130.1 14.6 16.8 4.5 450 19.8 5.43 90.5 13.8 16.0
33 6.2 620 23.5 8.24 137.3 15.0 17.3 803603 23 315313 4.8 480 20.1 5.86 97.7 14.5 16.7
803611 Grey 315311 6.9 690 24.1 8.65 144.1 14.9 17.2 Green 5.5 550 20.4 6.34 105.6 15.2 17.5
4.5 450 22.9 7.96 132.6 15.2 17.6 Red Green 4.5 450 21.0 6.68 111.3 15.1 17.4
Tan Lt. Blue 4.8 480 23.2 8.29 138.1 15.4 17.8 4.8 480 21.3 6.92 115.3 15.2 17.6
5.5 550 23.8 8.85 147.5 15.7 18.1 5.5 550 21.6 7.37 122.8 15.7 18.2
38 6.2 620 24.1 9.38 156.3 16.2 18.7 803602 25 315310 6.2 620 21.9 7.77 129.5 16.1 18.6
803611 Red 315311 6.9 690 25.0 9.87 164.4 15.8 18.2 Blue 6.9 690 22.3 8.25 137.4 16.7 19.2
- - - - - - - Red Green - - - - - - -

GOLF ROTORS
Tan Blue - - - - - - - - - - - - - -
5.5 550 25.3 9.85 164.1 15.4 17.8 5.5 550 22.3 7.83 130.4 15.8 18.3
43 6.2 620 25.9 10.52 175.3 15.7 18.1 803602 33 315310 6.2 620 22.6 8.34 138.9 16.4 18.9
803611 Dk. Brown 315300 6.9 690 26.5 11.04 183.9 15.7 18.1 Grey 6.9 690 23.2 8.75 145.7 16.3 18.8
- - - - - - - Red Green - - - - - - -
Dk. Brown Dk. Blue - - - - - - - - - - - - - -
5.5 550 25.9 10.88 181.2 16.2 18.7 5.5 550 24.1 8.94 149.0 15.4 17.8
48 6.2 620 27.1 11.46 191.0 15.6 18.0 803602 38 315310 6.2 620 24.1 9.36 156.0 16.1 18.6
803610 Dk. Green 833500 6.9 690 27.7 12.08 201.4 15.7 18.1 Red 6.9 690 24.4 9.75 162.4 16.4 18.9
- - - - - - - Red Green - - - - - - -
Dk. Brown Dk. Blue - - - - - - - - - - - - - -
5.5 550 27.1 11.86 197.7 16.1 18.6 5.5 550 24.4 9.88 164.7 16.6 19.2
53 6.2 620 27.7 12.58 209.6 16.3 18.9 803602 43 315310 6.2 620 24.7 10.54 175.6 17.3 20.0
803610 Dk. Blue 833500 6.9 690 28.3 13.24 220.6 16.5 19.0 Dk. Brown 6.9 690 25.3 11.06 184.3 17.3 20.0
Dk. Red Dk. Green - - - - - - -
- - - - - - -
G84B NOZZLES G85B NOZZLES
5.5 550 25.9 11.20 186.6 16.7 19.3
803601 48 315312 6.2 620 26.2 11.86 197.6 17.3 19.9
Dk. Green 6.9 690 26.8 12.43 207.1 17.3 19.9
Dk. Red Dk. Green - - - - - - -
- - - - - - -
5.5 550 27.1 11.98 199.7 16.3 18.8
803601 53 315312 6.2 620 27.4 12.54 209.0 16.7 19.2
LOW-ANGLE NOZZLES** Dk. Blue 6.9 690 27.7 13.06 217.7 17.0 19.6

= Nozzle plug P/N 315300 installed in the back side of the nozzle housing.
* Preliminary performance data.

** Low-angle nozzles reduce radius by 15%

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 167

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Models: G70B & G75B

B SERIES Radius: 14.3 to 22.9 m

Flow: 1.75 to 7.66 m3/hr; 29.1 to 127.6 l/min

FEATURES
• Models:
-- G70B: Full circle
-- G75B: Full/Part circle (50° to 360°)
G70B
• QuickCheck™ arc mechanism (G75B) Pop-up height: 8 cm
• QuickSet-360 arc mechanism (G75B) Overall height: 23 cm
• Nozzle choices: Flange diameter: 12 cm
Female Inlet: 1¼" ACME
-- G70B: 6 standard trajectory (25°)
-- G75B: 9 standard trajectory (25°)
• Nozzle range:
-- G70B: #15 to #28
-- G75B: #8 to #28
• Exclusive PressurePort™ nozzle technology
• Water lubricated gear-drive
• Check height up to 3 m in elevation change

OPERATING SPECIFICATIONS
• G70B
-- Radius: 16.2 to 22.9 m G75B
-- Discharge rate: 2.95 to 7.66 m3/hr; 49.2 to 127.6 l/min Pop-up height: 8 cm
-- Pressure range: 3.4 to 6.9 bar; 340 to 690 kPa Overall height: 23 cm
Flange diameter: 12cm
• G75B Female Inlet: 1¼" ACME
-- Radius: 14.3 to 21.6 m
-- Discharge rate: 1.75 to 7.34 m3/hr; 29.1 to 122.3 l/m
-- Pressure range: 2.8 to 6.9 bar; 280 to 690 kPa
• All B Series rotors are pressure rated at 10 bars; 1,000 kPa
GOLF ROTORS

G70B & G75B - SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Valve Options 3 Nozzle 4 Options
G70 = Full Circle B = Block Rotor with Check Valve S = SSU *
25 = Installed G70 Nozzle *

* Available in SSU model only

SSU = #25 * Standard Stocking Unit
Includes nozzle pack

G75 = Full/Part Circle,

B = Block Rotor with Check Valve 25 = Installed G75 Nozzle ** S = SSU *
50° - 360° Arc Range

** Available in SSU model only

SSU = #25 * Standard Stocking Unit
Includes nozzle pack
Example:
G70 - B - 25 - S = G70 full circle block rotor, installed #25 nozzle with nozzle pack, standard stocking unit model

168 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G70B &
G70B NOZZLE PERFORMANCE DATA* G75B NOZZLE PERFORMANCE DATA*
G75B NOZZLES
Nozzle Pressure Radius Flow Precip mm/hr Nozzle Pressure Radius Flow Precip mm/hr
bar kPa m m3/hr l/min bar kPa m m3/hr l/min
3.4 340 16.2 2.95 49.2 11.3 13.1 2.8 280 14.3 1.75 29.1 8.5 9.8
15 4.1 410 16.5 3.20 53.4 11.8 13.7 8 3.4 340 14.9 1.89 31.4 8.5 9.8
Grey 4.5 450 16.8 3.36 56.0 12.0 13.8 Lt. Brown 4.1 410 15.2 2.09 34.8 9.0 10.4
G70B
4.8 480 17.1 3.52 58.7 12.1 14.0 4.5 450 15.2 2.16 36.0 9.3 10.7
5.5 550 17.7 3.70 61.7 11.8 13.7 4.8 480 15.5 2.25 37.5 9.3 10.7
3.4 340 17.7 3.23 53.8 10.3 11.9 3.4 340 16.2 2.48 41.3 9.5 11.0
18 4.1 410 18.0 3.61 60.2 11.2 12.9 10 4.1 410 16.5 2.73 45.4 10.1 11.6
Red 4.5 450 18.3 3.70 61.7 11.1 12.8 Lt. Green 4.5 450 16.5 2.84 47.3 10.5 12.1
4.8 480 18.3 3.84 64.0 11.5 13.3 4.8 480 16.8 2.98 49.6 10.6 12.2
5.5 550 18.6 4.04 67.4 11.7 13.5 5.5 550 17.1 3.25 54.1 11.1 12.9
3.4 340 18.6 4.27 71.2 12.4 14.3 3.4 340 16.8 2.54 42.4 9.1 10.5 G75B
20 4.1 410 18.9 4.45 74.2 12.5 14.4 13 4.1 410 17.1 2.79 46.6 9.6 11.1
Dk. Brown 4.5 450 19.2 4.66 77.6 12.6 14.6 Lt. Blue 4.5 450 17.1 2.91 48.5 10.0 11.5
4.8 480 19.5 5.00 83.3 13.1 15.2 4.8 480 17.4 3.02 50.3 10.0 11.6
5.5 550 19.5 5.32 88.6 14.0 16.1 5.5 550 17.4 3.25 54.1 10.8 12.4
3.4 340 19.2 4.57 76.1 12.4 14.3 3.4 340 17.4 3.04 50.7 10.1 11.6
23 4.1 410 19.8 4.77 79.5 12.2 14.0 15 4.1 410 17.7 3.25 54.1 10.4 12.0
Dk. Green 4.5 450 19.8 4.97 82.9 12.7 14.6 Grey 4.5 450 18.0 3.36 56.0 10.4 12.0
4.8 480 20.1 5.32 88.6 13.1 15.2 4.8 480 18.0 3.48 57.9 10.7 12.4
5.5 550 20.4 5.66 94.3 13.6 15.7 5.5 550 18.3 3.73 62.1 11.2 12.9
3.4 340 19.8 4.95 82.5 12.6 14.6 3.4 340 18.3 3.29 54.9 9.8 11.4
25 4.1 410 20.4 5.11 85.2 12.3 14.1 18 4.1 410 18.6 3.57 59.4 10.3 11.9
Dk. Blue 4.5 450 20.4 5.36 89.3 12.9 14.8 Red 4.5 450 18.6 3.70 61.7 10.7 12.4
4.8 480 21.0 5.75 95.8 13.0 15.0 4.8 480 18.9 3.84 64.0 10.7 12.4
5.5 550 21.6 6.11 101.8 13.0 15.1 5.5 550 19.2 4.13 68.9 11.2 12.9
4.8 480 21.6 6.38 106.4 13.6 15.7 4.1 410 18.9 4.04 67.4 11.3 13.1
28 5.5 550 21.6 6.79 113.2 14.5 16.7 20 4.5 450 18.9 4.13 68.9 11.6 13.4
Black 6.2 620 22.3 7.22 120.4 14.6 16.8 Dk. Brown 4.8 480 19.2 4.36 72.7 11.8 13.7
6.9 690 22.9 7.66 127.6 14.6 16.9 5.5 550 19.5 4.66 77.6 12.2 14.1
6.2 620 19.8 4.95 82.5 12.6 14.6
* Complies to ASAE standard. All precipitation rates calculated 4.1 410 19.5 4.97 82.9 13.1 15.1
for 360° operation. All triangular rates are equilateral. 23 4.5 450 19.8 4.86 81.0 12.4 14.3
To calculate precipitation rates for 180° operation, multiply by 2.
Dk. Green 4.8 480 19.8 5.36 89.3 13.7 15.8
5.5 550 20.1 5.82 96.9 14.4 16.6

GOLF ROTORS
6.2 620 20.4 6.13 102.2 14.7 17.0
4.1 410 19.8 5.34 89.0 13.6 15.7
25 4.5 450 19.8 5.63 93.9 14.4 16.6
Dk. Blue 4.8 480 20.4 5.82 96.9 13.9 16.1
5.5 550 21.0 6.20 103.3 14.0 16.2
6.2 620 21.6 6.59 109.8 14.1 16.2
4.8 480 20.1 6.11 101.8 15.1 17.4
28 5.5 550 20.7 6.56 109.4 15.3 17.6
Black 6.2 620 21.3 6.95 115.8 15.3 17.6
6.9 690 21.6 7.34 122.3 15.7 18.1

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 169

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Model: G35B

B SERIES Radius: 5.5 to 15.2 m

Flow: 0.43 to 2.91 m3/hr; 7.2 to 48.5 l/min

FEATURES
• Model: G35B: Full/Part Circle (50º - 360º)
• QuickCheck™ arc mechanism
• QuickSet-360 arc mechanism G35B
• Nozzle choices: Pop-up height: 8 cm
-- 8 multi-trajectory 15°–25° Overall height: 23 cm
Flange diameter: 12 cm
• Nozzle range: Female Inlet: 1¼" ACME
-- #2 to #12
• Water lubricated gear-drive
• Check height up to 3 m in elevation change

OPERATING SPECIFICATIONS
• Radius: 5.5 to 15.2 m
• Flow: 0.43 to 2.91m3/hr; 7.2 to 48.5 l/min
• Pressure range: 2.8 to 4.5 bar; 280 to 450 kPa
• All B Series rotors are pressure rated at
10 bar; 1,000 kPa
GOLF ROTORS

G35B – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Valve Options 3 Nozzle 4 Options*

G35 = Full/Part Circle 50º to 360º B = Block rotor with check valve 6 = Installed G35 Nozzle* S = SSU*

* Available in SSU model only

SSU = #6 * Standard Stocking Unit
Includes nozzle rack

Example:
G35 - B - 6 - S = G35 full/part circle block rotor, installed #6 nozzle with nozzle rack, standard stocking unit model

170 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

G835 NOZZLE PERFORMANCE DATA* G835 NOZZLES

Nozzle Pressure Radius Flow Precip mm/hr

bar kPa m m3/hr l/min
2.8 280 5.5 0.43 7.2 14.3 16.6
2 3.4 340 6.1 0.48 7.9 12.8 14.8
Yellow 4.1 410 6.7 0.55 9.1 12.1 14.0
4.5 450 7.0 0.59 9.8 12.0 13.9
2.8 280 7.0 0.68 11.4 13.9 16.0
3 3.4 340 7.6 0.73 21.1 12.5 14.5
Yellow 4.1 410 8.2 0.80 13.2 11.7 13.6
4.5 450 8.5 0.82 13.6 11.2 13.0
2.8 280 7.6 0.89 14.8 15.3 17.6
4 3.4 340 8.5 0.93 15.5 12.8 14.8
Yellow 4.1 410 9.1 1.00 16.7 12.0 13.8
4.5 450 9.4 1.04 17.4 11.7 13.5
2.8 280 8.8 1.07 17.8 13.7 15.8
5 3.4 340 9.8 1.14 18.9 11.9 13.8
Yellow 4.1 410 10.1 1.20 20.1 11.9 13.7
4.5 450 10.7 1.23 20.4 10.8 12.4
2.8 280 9.8 1.36 22.7 14.3 16.5
6 3.4 340 10.7 1.43 23.8 12.6 14.5
Yellow 4.1 410 11.3 1.50 25.0 11.8 13.6
4.5 450 11.9 1.54 25.7 10.9 12.6 HQ5LRC Quick Coupler
2.8 280 11.0 1.77 29.5 14.7 17.0 with HSJ-1 SnapLok™ equipped
8 3.4 340 11.9 1.82 30.3 12.9 14.8 swing joint

Yellow 4.1 410 12.8 1.89 31.4 11.5 13.3

4.5 450 13.1 1.93 32.2 11.2 13.0 Introducing Hunter’s new full line of HSJ
2.8 280 11.9 2.20 36.7 15.6 18.0 heavy-duty swing joints with configurations for
10 3.4 340 13.1 2.29 38.2 13.4 15.4 every need and every project. There is even a version
Yellow 4.1 410 13.7 2.34 39.0 12.4 14.4 specifically designed for quick coupler applications.
The SnapLok outlet on HSJ-1 models come equipped with
4.5 450 14.3 2.39 39.7 11.6 13.4
accommodations for both rebar and pipe stabilisation, as
2.8 280 13.4 2.73 45.4 15.2 17.5
well as heavy-duty brass outlet threads with a unique
12 3.4 340 14.3 2.77 46.2 13.5 15.6 anti-rotation locking feature.
Yellow 4.1 410 14.6 2.84 47.3 13.3 15.3
4.5 450 15.2 2.91 48.5 12.5 14.5 See the new HSJ swing joints on page 173

* Complies to ASAE standard. All precipitation rates calculated

GOLF ROTORS
for 360° operation. All triangular rates are equilateral. To
calculate precipitation rates for 180° operation, multiply by 2.

ROTOR ACCESSORIES
HOSE-SWIVEL ADAPTERS

Models Hose Swivel Adapters

• Hose swivel adapter for G90 and G900 Series (fits ¾" & 1" hose) P/N G90HS100
• Hose swivel adapter for G800 Series (fits ¾" & 1" hose) P/N G800HS100

RUBBER COVER KITS

Models Rubber Cover Kit

• G990 rubber cover kit (date codes 06/11 & prior only) P/N 473800
• G995 rubber cover kit (also G990 date codes 07/11 & after) P/N 473900

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 171

 G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

Models: G70RT, G75RT & G80RT

RT SERIES Radius: 14.3 to 26.8 m

Flow: 1.75 to 13.15 m3/hr; 29.1 to 219.2 l/min

FEATURES
• Models:
-- G70RT: Full circle riser with nozzle set
-- G75RT: Full/Part circle riser with nozzle set G70RT / G75RT
Pop-up height: 8 cm
-- G80RT: Full circle riser with nozzle set
• Works with all 1" and 1½" inlet Toro® 600 and 700 Series golf rotors
• Converts current sprinklers into closed-case rotors
• The RT upgrade extends the life of existing irrigation systems
• Performance, reliability and long life
• Upgrade takes less than 5 minutes

G80RT
Pop-up height: 8 cm

Quick and Easy Upgrade!

The RT retro upgrade takes just minutes
and extends the life and reliability of aging
irrigation systems.

G70RT/G75RT RETRO RISERS G80RT RETRO RISERS

To Replace Use Hunter Model/Nozzle To Replace Use Hunter Model/Nozzle

GOLF ROTORS

TORO® Nozzle G70RT G75RT TORO® Nozzle G80RT

Full Circle Full/Part Circle Full Circle
31 15 15 56 23
32 18 18 57 33
630 33 20 20
650 58 33
34 28 – 59 38
62 15 15 70 43

660
63 18 18 670 71 48
64 25 25 72 48
65 28 – 84 25
31 15 15 85 33
32 18 18 680 86 33
730 33 20 20 87 43
34 23 23 88 48
35 28 – 54 25
62 15 15 55 33
63 18 18 750 56 38
760 64 20 23 57 43
65 25 25 58 48
66 28 – 84 25
85 25
86 33
780 87 38
88 43
89 48

172 Visit hunterindustries.com

G900 SERIES G800 SERIES B SERIES ROTOR ACCESSORIES RT SERIES HSJ SWING JOINTS

HSJ SWING JOINTS

BY LASCO FITTINGS, INC.

FEATURES
• Heavy-duty prefabricated PVC swing joints with
O-Ring seals
• Available in all popular inlet and outlet configurations Swing Joints
HSJ-0 = Model ¾"
• Choose from 20, 30 or 46 cm lay arm lengths and HSJ-1 = Model 1" (25 mm)
Single Top-Out or Triple Top-Out designs HSJ-2 = Model 1¼" ()
• Unique SnapLok™ outlet with brass threads offers HSJ-3 = Model 1½" (40 mm)
excellent support and durability for quick coupler
installations
• Match HSJ swing joint and Hunter golf rotor purchases
to qualify for an upgraded 5-year component exchange
golf rotor warranty*
* Must be purchased from authorised Hunter Golf
distributor to qualify for extended warranty program.

SWING JOINT – SPECIFICATION BUILDER: ORDER 1 + 2 + 3 + 4

1 Model 2 Inlet Type 3 Outlet Type 4 Outlet Style 5 Lay Length

HSJ-0 = ¾" Commercial Swing Joint 3 = Male - NPT 2 = Male - NPT 2 = Single Top-Out 8 = 20 cm
Lay Arm*
4 = Male - ACME* 3 = Enlarging - to 1½" (40 mm) Male NPT*
HSJ-1 = 1" Heavy-Duty Swing Joint 5 = Spigot - Metric Short** 5 = Male - BSP (not available in HSJ-0) 4 = Triple Top-Out* 12 = 30 cm
Lay Arm
6 = Male - BSP** 6 = Enlarging - to 1½" (40 mm) Male BSP*
HSJ-2 = 1¼" Heavy-Duty Swing Joint 7 = Spigot - 10 cm Long** 8 = Enlarging - to 1½" Male ACME* 18 = 46 cm
Lay Arm**
M = Main ACME H-Connection *** 0 = Male ACME
HSJ-3 = 1½" Heavy-Duty Swing Joint P = Main ACME V-Connection **** A = Enlarging/Reducing - to 1¼" Male ACME**
CENTRAL
S = Male - BrassCONTROL
NPT SnapLok™ ***
* Not available in HSJ-0 or HSJ-3. U = Male - Brass BSP SnapLok™ ***
Use “M” inlet for HSJ-3.

** Not available in HSJ-0. * Not available in HSJ-0 or HSJ-3 * Not available in S * HSJ-0 only

GOLF ROTORS
Outlet Type
*** Horizontal connection reduces from ** Not available in HSJ-0 and HSJ-2 ** Not available in
1½" ACME to swing joint size HSJ-0

**** Vertical connection reduces from *** HSJ-1 model only - for quick coupler
1½" ACME to swing joint size

Example:
HSJ - 3 - M - 0 - 2 - 12 = HSJ 1½" heavy-duty swing joint, 1½" Male ACME horizontal connection to mainline tee, 1½" Male ACME single top outlet, 12" lay arm length.

ACME ADAPTER FITTINGS

1¼" Models 1½" Models

1¼" male ACME x 1" female NPT P/N 109325 1½" male ACME x 1" female NPT P/N 475400
1¼" male ACME x 1" female BSP P/N 105329 1½" male ACME x 1" female BSP P/N 475500
1¼" male ACME x 1¼" female NPT P/N 474800 1½" male ACME x 1¼" female NPT P/N 475200
1¼" male ACME x 1¼" female BSP P/N 474900 1½" male ACME x 1¼" female BSP P/N 475300
1¼" male ACME x 1½" female NPT P/N 104153 1½" male ACME x 1½" female NPT P/N 475000
1¼" male ACME x 1½" female BSP P/N 107262 1½" male ACME x 1½" female BSP P/N 475100

Acme x Acme Models B2B Tee Assembly

1½" male ACME x 1" ACME female P/N 225300 1½" ACME threaded tee and 1½" adapter for connecting
1½" male ACME x 1¼" ACME female P/N 225400 two swing joints to a single mainline connection in
1¼" male ACME x 1" ACME female P/N 225500 back-to-back installations around greens.

P/N = HSJ-305-015-3 = NPT Inlet

P/N = HSJ-305-015-6 = BSP Inlet
P/N = HSJ-305-015-M = ACME Inlet (shown)

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 173

 CENTRAL CONTROL
CENTRAL CONTROL

The Future is Here

Pilot® central control uses an array of

advanced innovations to put the superintendent in
complete command.

174
PILOT® CENTRAL CONTROL
ADVANCED FEATURES
COMPLETE CONTROL
PILOT-CC SOFTWARE CENTRAL CONTROL PILOT-FC FIELD CONTROLLER
Safely balance sprinkler The Pilot field controller manages up to 80 stations in 10
demand with water and station increments. The full-featured controller has
electrical supply for the everything you need in a stand-alone field controller. For a
most efficient irrigation fully automated, flow-optimised system, network all your
cycles possible. controllers together with Pilot-CC central control software.
Communication options include hardwire, UHF radio, and two
spread-spectrum bands. Power options include both 120 VAC
and 230 VAC.

PILOT-DH DECODER HUB EASY TO PROGRAM AND MAINTAIN

Pilot includes a two-wire decoder option. Pilot-DH decoder Ease-of-Use: The control panel features a large, multi-
hubs have a 999-station capacity and can run up to 120 language display and an array of function buttons providing
stations simultaneously. quick access to the most commonly used features. The display
clearly shows what the controller is doing and has a unique
The hub has a plastic pedestal enclosure with a full-featured
feature which shows the user what time the next scheduled
control panel. It can be used as in-field control, a stand-alone
watering will occur.
decoder controller, or linked to a Pilot-CC central control for
fully flow-optimised irrigation management. Ease-of-Maintenance: The system was designed with you
in mind. Circuit boards are encapsulated in polyurethane to
Communication options include hardwire, UHF radio, and two
reduce damage from moisture and pests. All hardware is
spread-spectrum bands. Power options include both 120 and
captured, so you won’t lose screws in the grass. The clean,
230 VAC.
modular design of Pilot units allow them to be serviced with a
Phillips screwdriver, which we provide with every controller.

CENTRAL CONTROL

175
 PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

PILOT® SOFTWARE
Pilot is easy to use and has all the features you need to reliably and
automatically water your course. Runtimes can be adjusted manually or
determined automatically using application depth. Irrigation is scheduled
through a powerful programming matrix which lets you see every sprinkler on
the course while you make your adjustments. Pilot offers two types of water
management, flow optimised and FCP or field controller program. When
flow-optimised, electrical and hydraulic demand are efficiently managed to
ensure your watering window is as short as possible. When you use an FCP you
have total control over when, where and how long sprinklers run—perfect for
overseeding, seed germination, grow-in and other cultural practices where
optimal use of the pump station is a secondary concern. FCPs can be retrieved
into the central control software, edited, then sent back to the field unit – so you
can manage all your controller schedules from the computer in your office.

PILOT SOFTWARE SPECIFICATIONS

• Operating system: 64-bit Windows® 8
• Maximum field controllers: 999
• Maximum stations: 79,920
• ET-based scheduling: weather station or manually entered
• Hydraulic management: automated and graphed to individual stations
• Mapping: online maps converted from AutoCAD and other applications

* Note: Windows is a registered trademark of The Microsoft Corporation

Overview - Pilot
CENTRAL CONTROL

176 Visit hunterindustries.com

PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

GO WITH THE FLOW

Pilot® uses your electrical and hydraulic data to efficiently balance sprinkler
demand while maintaining flow at safe velocities. To protect your pump station
and maintain optimal sprinkler uniformity, irrigation can be gradually stepped up
in safe increments.

Flow Optimisation

CREATE AND EDIT SCHEDULES OUT ON THE COURSE

With Pilot, critical irrigation is not dependent upon the whims and availability
of a computer or communications link where it is subject to a single point of
failure. Pilot software creates schedules then sends them to the field where
controllers do the actual irrigating. Because Pilot field controllers are packed
with intelligence, you can even create and edit schedules out on the course and
transfer them back to Pilot for review and editing.

Schedule Creation

CENTRAL CONTROL
MAPPING YOUR COURSE
Although it is not required to have a map, adding one allows you to run water
by clicking the station symbols on the map, monitor stations as they are
running, and adjust certain settings.

Maps

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 177

 PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

Application: Golf

PILOT CONTROLLER ® Number of Stations: 80

Type: Field Controller

FEATURES
• 5 languages • 1–31 day skip-day scheduling
• Up to 80 station outputs in • One-touch rain shutdown up to 30
10-station increments days or indefinitely Pilot-FC Plastic Pedestal
Height: 100 cm
• Up to 3 Hunter golf valve-in-head • One-touch Safe-Pause™ with 30
Width: 60 cm
rotors per station output minute safety timer Depth: 44 cm
• Up to 20 simultaneous Hunter • 1–300% runtime seasonal adjustment Weight: 32 kg
golf valve-in-head rotors active • Seasonal start time adjustment is
per controller used to quickly change all start times
• 32 automatic schedules with 8 start plus or minus 30 minutes
times per schedule
• Exclusive Safe-Toggle™ mechanical
on-off-auto station switches

POWER SUPPLY INPUT

• 120/230 VAC at 60/50 Hz
• 1.2 Amps maximum at 120 VAC Pilot-FI Field Interface
• 0.73 Amps maximum at 230 VAC One is required with any central
control system. It is used to link the
central computer to the field
POWER SUPPLY OUTPUT equipment. For indoor locations only.

• Station output: 1 Amp at 24 VAC Height: 30 cm

Width: 30 cm
• 24 VAC Hot Post output: 420 mA at 24 VAC Depth: 11 cm
• Solenoid Capacity: 3 standard 24 VAC Hunter golf valve-in-head rotors per Weight: 2 kg
output, 20 maximum simultaneous stations

RADIO SYSTEMS
• UHF Radio: 450-470 MHz; other frequeny ranges available for selected
markets
• Spread Spectrum Radio: 915 MHz (US) and 2.4 GHz (international)

WIRED SYSTEMS
CENTRAL CONTROL

• GCBL: Shielded two twisted pairs, 0.82 mm²

• GCBLA: Armored, shielded two twisted pairs, 0.82 mm²

PILOT-FI – SPECIFICATION BUILDER ORDER 1 + 2 + 3

1 Model 2 Standard Features 3 Options

HWR Hardwire communications

UHF UHF radio communications (US only)

Pilot-FI Plastic pedestal (grey)

LF Licence-free radio communications

ILF Licence-free radio communications

Examples:
Pilot-FI-HWR Field interface with hardwire communications
Pilot-FI-UHF Field interface with UHF radio communications (US only)
Pilot-FI-ILF Field interface with international licence-free radio communications

178 Visit hunterindustries.com

PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

THE PILOT® FIELD CONTROLLER WAS BUILT SPECIFICALLY FOR

GOLF COURSE IRRIGATION CONTROL.

Water-Resistant Keypad
Large backlit display with convenient
function buttons for the most Easy to Service
commonly used features. Built-in The only tool required is a Phillips
system diagnostics make trouble- screwdriver included with every
shooting your system a breeze. controller.

Modular 10-Station Expansion Boards

Auto/On/Off Switches and
Colour-coded modular components
Diagnostic LED Indicators
with captured screws so they won’t
Standard for all station outputs,
get lost, making it easy to assemble
provide quick troubleshooting
and troubleshoot.
and watering tools.

Conveniently Located Dual-Voltage

(120/230 VAC) Junction Box Spacious Wiring Area
Features heavy duty surge protection No exposed circuitry or loose wires.
and even includes a spare fuse. All circuit boards are encapsulated in
polyurethane to protect them from
moisture, insects and temperature
extremes.

CENTRAL CONTROL
PILOT-FC – SPECIFICATION BUILDER ORDER 1 + 2 + 3

1 Model 2 Standard Features 3 Options

Pilot-FC30 (30-station) S Stand-alone field controller with no central communications

Pilot-FC40 (40-station) HWR Hardwire communications

Pilot-FC50 (50-station) Plastic pedestal (grey) UHF UHF radio communications (US only)

120/230 VAC 60/50 Hz LF Licence-free spread spectrum radio communications

Pilot-FC60 (60-station) (900 MHz for North America and where permitted)
dual-voltage transformer

Pilot-FC70 (70-station) ILF Licence-free spread spectrum radio communications

(2.4 GHz for international, where permitted)
Pilot-FC80 (80-station)

Examples:
Pilot-FC40-S 40-station, stand-alone field controller with no central communications
Pilot-FC70-HWR 70-station field controller with hardwire communications
Pilot-FC80-ILF 80-station field controller with international licence-free radio communications

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 179

 PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

Application: Golf

PILOT DECODERS ® Number of Stations: 999

Type: Decoder System

Decoder installations continue to be one of the fastest growing forms of

technology in irrigation control. A key advantage over conventional systems is
that decoders use less wire for an overall irrigation system. That means lower
cost, quicker installation time, and easier system diagnosis and repair if needed.
Systems can be easily expanded—with minimal digging and disruption of
landscaping—by adding in more decoders rather than running additional wires.

Pilot enables you to take advantage of this cost-efficient approach. Pilot

decoders are available with 1, 2, 4 and 6-station outputs, making it possible to
run each head on an entire green with a single decoder. In all, decoders let you
operate up to 999 stations out to 4.5 km from a single hub.

Pilot decoder systems include built-in surge suppression, colour-coded wire Pilot Decoder Hub
connections, true independent station control, programmable station addresses,
Water-Resistant Keypad
and two-way feedback to the controller with confirmation and status indication.
Backlit display and secondary LED facepack means it can be
used day or night
Pilot-SG surge protectors are required when a system is designed and installed
with Decoder-In-Head (DIH) rotors. Diagnostic LED Indicators
For all functions on decoder output module

250-Station Output Modules

Enable your decoder hub to grow with your course. Start with
250 - grow to 999

Pilot Decoders DS-G Surge Ground Arrestor

1 & 2 Station Decoders:
Height: 9 cm
Width: 4 cm All DIH rotors include two IBM DBRY-6
Depth: 2.5 cm splices for connection to the 2-wire
Weight: 150 g path. DIH rotor control systems require
grounding with Pilot-SG surge
4 & 6 Station Decoders: suppressors coupled to appropriate
Height: 9 cm grounding plate or rod. Hunter
Width: 4.5 cm recommends a minimum of one
Depth: 4 cm Pilot-SG for every 12 installed DIH
Weight: 250 g rotors or as per project specification.
CENTRAL CONTROL

Distinct yellow design makes it much easier to find decoders in dark valve boxes
or buried in the soil.

PILOT-DH – SPECIFICATION BUILDER ORDER 1 + 2 + 3

1 Model 2 Standard Features 3 Options

Pilot-DH250 (250-station) S Stand-alone decoder hub with no central communications

Pilot-DH500 (500-station) HWR Hardwire communications

Pilot-DH750 (750-station) UHF UHF radio communications (US only)

Plastic pedestal (grey)

LF Licence-free spread spectrum radio communications

Pilot-DH999 (999-station)
(900 MHz for North America and where permitted)

ILF Licence-free spread spectrum radio communications

(2.4 GHz for international, where permitted)

Examples:
Pilot-DH250-S 250-station, stand-alone decoder hub with no central communications
Pilot-DH750-ILF 750-station decoder hub with international licence-free radio communications
Pilot-DH999-HWR 999-station decoder hub with hardwire communications

180 Visit hunterindustries.com

PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

Extend control up to 4,5 km

with a single pair of wires

Decoder in valve box

Pilot-DH Runs up to 45 m from
Provides independent station decoder to solenoids
control of 999 decoders with up
to 120 running simultaneously

Expansion options
If your course has over 999
stations, you can use up
to 999 decoder hubs for
998,001 decoders

Surge Protection
Decoder-In-Head systems require
approximately one Pilot surge arrestor
for every 12 decoders. The actual
number will vary by system design

Decoder-In-Head
Hunter’s exclusive DIH golf
rotor minimises valve box covers

CENTRAL CONTROL
on playing surface

Wireless Programming!
DECODERS – SPECIFICATION BUILDER ORDER 1 + 2 Communicate with decoders directly
through plastic case: wireless electro-
1 Model 2 Standard Features magnetic induction saves waterproof
Pilot-100 1-station decoder connectors
Built-in surge protection
Pilot-200 2-station decoder See the ICD-HP on 183
DBRY-6 Waterproof Connectors
Pilot-400 4-station decoder included

Pilot-600 6-station decoder

Pilot-SG Inline surge protection

(for DIH rotor systems)

Example:
Pilot-100 1-station decoder

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 181

 PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

Application: Golf

WEATHER STATION Range: Wireless 1 km

Type: Weather Station

FEATURES
• Includes built-in 60-day data logger: With onboard evapotranspiration (ET)
calculation (modified Penman-Monteith equation for turf grass)
• Wireless package uses 2.4 GHz licence-free technology
-- 2.4 GHz radio systems can reach up to 3 km TurfWeather Station
Height: 61 cm
-- In rural areas, try the licence-free, 900 MHz radio for links up to 800 m Width: 40.5 cm
• Wired systems use Hunter GCBL, direct-bury cable with a range of 1.25 km Depth: 38 cm
(dedicated 9-pin serial computer port required) Weight: 6 kg
• Optional solar panel kit provides wireless power
-- Simple installation and versatile mounting with on-board 800 mAh
rechargeable gel cell battery with 18 VDC transformer and
7 m power cable.
• Weatherproof construction: With UV stabilised enclosure, weather-proof
external connectors and long-life coated circuit boards
• UL, c-UL and CE certifications

COMPLETE PACKAGES INCLUDE HUNTER WEATHER SOFTWARE

Model Description
TWHW Wired communications to central computer – GCBL cable is required
TW24 2.4 GHz licence-free radio communication to central computer
TW916 916 MHz licence-free radio communication to central computer
TW922A 922 MHz licence-free radio communication to central computer
TWSUN Optional solar power kit for all TurfWeather models
CENTRAL CONTROL

182 Visit hunterindustries.com

PILOT® SOFTWARE PILOT® CONTROLLER PILOT® DECODERS WEATHER STATION MAINTENANCE RADIO ICD-HP

Application: Golf

MAINTENANCE RADIO Range: Up to 3.5 km

Type: Remote Control

FEATURES
• Instant control of stations, blocks and programs
• Fewer buttons to push
• Instant audio confirmation of commands TRNR Radio
• Hunter’s famous StraightTalk™ Technology: Enables wireless Height: 10.25 cm
remote control at ranges up to 3.5 km whether or not the Width: 5.25 cm
central computer is turned on Depth: 3 cm
Weight: 200 grams
• Easy commands that show in display before sending
• Compact size, industrial construction
• Suitable for two-way voice communication with crews and office
• High signal output: 2 watts, UHF (450–470 MHz)*
* Note: Licence required in most countries

ICD-HP Type: Decoder Programmer

WIRELESS HANDHELD
DECODER PROGRAMMER

FEATURES
• Program or re-program decoder stations, whether new or installed
• Program any station numbers in any order, or skip stations for
future expansion
• Turn decoder stations on and view solenoid status, current in milliamps,
and more

CENTRAL CONTROL
• Built-in voltmeter for decoder path
• Communicates with decoders directly through plastic case: wireless ICD-HP
electro-magnetic induction saves waterproof connectors Height: 21 cm
• Communicates through the top of DIH rotors- no cover Width: 9 cm
removal required Depth: 5 cm

Packaged in an outdoor carrying case, this complete kit

includes probes, induction cup, cable, USB power cable for
bench use, and 4 AA batteries for field work.
ICD-HP

Visit hunterindustries.com GOLF IRRIGATION | Built on Innovation® 183

 184
TECHNICAL
SECTION 10:
TECHNICAL
INFORMATION

TECHNICAL

185
 HUNTER
Technical Services

Contact Us
Our Hunter Technical Service Team has more
Phone: 1-800-733-2823, Mon–Fri 6 a.m.–4 p.m. PST
than 197 years of combined industry expertise. Email: [email protected]
After Hours: Leave us a voice message and someone
Anyone can sell you products. At Hunter, we’ve always from our team will return your call the next business day
believed the difference lies in providing world-class product
TECHNICAL

support to make your job easier. When you need technical

Online Product Information
help, whether it’s to ask a quick question or to get product-
specific troubleshooting assistance, you can count on Hunter’s Visit our Support Library for instructional videos,
Technical Services Team to provide the best support in the owner’s manuals, installation details, articles, and more.
industry. Our knowledgeable experts are always available to Rotors, Controllers, Sensors, Drip/Micro Irrigation,
help you. Valves, Sprays, Nozzles, FX Control, and Central Control

In addition, our Field Service Team provides on-site training www.hunterindustries.com/support

and troubleshooting assistance with central control,
decoder system, and other commercial, residential,
municipal, and golf course installations. Their combined
experience of 200+ years in the industry is invaluable when
you need factory support by phone, remote desktop,
or at the job site.

186
 PRODUCT
Specialist Program

This unique training program is designed

to equip contractors, distributors, and other
professionals with the knowledge to become
familiar with Hunter products.

To get started: Choose from three levels of training:

1. Access the training website: Technician Level: Basic knowledge of the entire Hunter product line
• Visit www.training.hunterindustries.com Specialist Level: In-depth knowledge on a particular product
• Log in or create a new account
• Click on courses, enroll at no cost, watch the training module, Expert Level: Thorough knowledge on a product category
and take the quiz

TECHNICAL
2. Take courses for the level you choose:
• Click on the Specialist Program and choose the level you need
• Click on the courses required for each level and enroll in
the courses
• Watch the training module and take the quiz

3. Apply for your certificate:

• Submit the Completion Notification Form for each level
• Obtain your certificate and use your membership card. You
may use your certificates to apply for Continuing Education
Unit Credits through the Irrigation Association

187
 TECHNICAL INFORMATION

REPLACEMENT GUIDE
Bringing together a combination of intelligent design, carefully controlled manufacturing, and regular testing to ensure conformity to the
strictest standards, Hunter has been able to create truly exceptional nozzles. Essentially, we have made the science of developing supe-
rior nozzles—and thus, superior sprinklers—look easy. In the process, we have also made it easy for you to determine which of these high
performance sprinklers can be used to replace other brands. Simply consult the following replacement guide to find the appropriate Hunter
sprinkler for any irrigation need.

PGJ GEAR DRIVEN

PGP® GEAR DRIVEN ROTARY SPRINKLERS PGP® GEAR DRIVEN ROTARY SPRINKLERS
ROTARY SPRINKLERS
To Replace Use Hunter Nozzle To Replace Use Hunter Nozzle To Replace Use Hunter Nozzle
RAIN BIRD® Red RAIN BIRD® Red Blue TORO® Red Blue
3500 0.75 0.75 Mini-Paw 15103 07 (Black) 6 2.5 300/340 308-XX-02 4 1.5
1 1.0 09 (Green) 7 3.0 Stream Rotor 308-XX-03 7 3.0
1.5 1.5 Maxi-Paw 2045 06 (Red) 5 2.0 316-XX-02 7 3.0
2 2.0 07 (Black) 6 2.5 316-XX-03 10 8.0
3 3.0 08 (Blue) 8 4.0 XP-300 Series XP-300-090-07 4 1.5
4 4.0 10 (Yellow) 9 5.0 180-07 7 3.0
T-Bird T-22 .65 (Blue) 0.75 12 (Beige) 10 8.0 360-07 10 8.0
1.0 (Red) 1.0 R-50 1.5 (Black) 5 2.0 XP-300-090-09 5 2.0
1.3 (Black) 1.5 2.0 (Brown) 7 3.0 180-09 8 4.0
2.0 (Brown) 2.0 3.0 (Grey) 8 4.0 360-09 11 --
2.5 (Grey) 2.5 4.0 (Yellow) 9 5.0 XP-300-090-10 5 2.0
4.0 (Yellow) 4.0 6.0 (Green) 10 8.0 180-10 9 5.0
T-Bird T-30 1.0 (Red) 1.0 T-Bird T-30 1.3 (Black) 4 1.5 360-10 12 --
1.3 (Black) 1.5 2.5 (Grey) 6 2.5 Super 600 1.3 4 1.5
2.0 (Brown) 2.0 5.0 (Green) 9 5.0 2.5 7 3.0
2.5 (Grey) 2.5 5000 1.5 4 1.5 5.0 10 8.0
4.0 (Yellow) 4.0 2.0 5 2.0 6.0 10 8.0
5.0 (Green) 5.0 3.0 7 3.0 Super 700 1.3 3 1.5
4.0 8 4.0 1.5 4 1.5
6.0 9 5.0 2.0 5 2.0
To Replace Use Hunter Nozzle
8.0 10 8.0 3.0 7 3.0
TORO® Red
5505 2 5 2.0 4.5 8 4.0
300/340 1 0.75 3 6 2.5 6.0 9 5.0
Stream Rotor 2 1.5 4 7 3.0 7.5 10 8.0
3 3.0 5 8 4.0 9.0 11 8.0
6 9 5.0 Super 800 0.50 1 --
8 10 8.0 0.75 2 --
To Replace Use Hunter Nozzle
10 10 8.0 1.0 4 1.5
NELSON® Red
12 11 8.0 2.0 6 2.0
5500 #51 0.75
2.5 7 2.5
#52 1.5
3.0 8 3.0
TECHNICAL

#53 2.0 To Replace Use Hunter Nozzle 4.0 9 4.0

#54 2.5 K-RAIN® Red Blue 6.0 10 6.0
RPS75 0.50 1 -- 8.0 11 8.0
0.75 2 -- TR50 1.0 3 --
1.0 4 1.5 1.5 4 1.5
2.0 6 2.0 2.0 5 2.0
2.5 7 2.5 3.0 6 3.0
3.0 8 3.0 4.5 8 4.0
4.0 9 4.0 6.0 9 6.0
6.0 10 6.0 7.5 10 8.0
8.0 11 8.0 9.0 11 8.0

188
TECHNICAL INFORMATION

REPLACEMENT GUIDE

PGP® ULTRA / I-20 GEAR DRIVEN PGP® ULTRA / I-20 GEAR DRIVEN
SPRAY SPRINKLERS
ROTARY SPRINKLERS ROTARY SPRINKLERS
To Replace Use Hunter Nozzle To Replace Use Hunter Nozzle To Replace Use Hunter Product
RAIN BIRD® Blue TORO® Blue ANY MFRS NOZZLES Nozzles
Mini-Paw 15103 07 (Black) 2.5 300/340 308-XX-02 1.5 Nozzles 8 Radius 8A
09 (Green) 3.0 Stream Rotor 308-XX-03 3.0 10 Radius 10A
Maxi-Paw 2045 06 (Red) 2.0 316-XX-02 3.0 12 Radius 12A
07 (Black) 2.5 316-XX-03 8.0 15 Radius 15A
08 (Blue) 4.0 XP-300 Series XP-300-090-07 1.5 17 Radius 17A
10 (Yellow) 5.0 180-07 3.0 Rain Bird 1800 Pro-Spray
12 (Beige) 8.0 360-07 8.0 1800 SAM Pro-Spray-CV
R-50 1.5 (Black) 2.0 XP-300-090-09 2.0 1800 SAM PRS Pro-Spray-PRS30-CV
2.0 (Brown) 3.0 180-09 4.0 Uni-Spray PS Ultra
3.0 (Grey) 4.0 360-09 --
4.0 (Yellow) 5.0 XP-300-090-10 2.0
6.0 (Green) 8.0 180-10 5.0
T-Bird T-30 1.3 (Black) 1.5 360-10 --
2.5 (Grey) 2.5 Super 600 1.3 1.5
5.0 (Green) 5.0 2.5 3.0
5000 1.5 1.5 5.0 8.0
2.0 2.0 6.0 8.0
3.0 3.0 Super 700 1.3 1.5
4.0 4.0 1.5 1.5
6.0 5.0 2.0 2.0
8.0 8.0 3.0 3.0
5505 2 2.0 4.5 4.0
3 2.5 6.0 5.0
4 3.0 7.5 8.0
5 4.0 9.0 8.0
6 5.0 Super 800 0.50 --
8 8.0 0.75 --
10 8.0 1.0 1.5
12 8.0 2.0 2.0
2.5 2.5
3.0 3.0
To Replace Use Hunter Nozzle 4.0 4.0
K-RAIN® Blue 6.0 6.0
RPS75 0.50 -- 8.0 8.0
0.75 -- TR50 1.0 --
1.0 1.5 1.5 1.5
2.0 2.0 2.0 2.0
2.5 2.5 3.0 3.0

TECHNICAL
3.0 3.0 4.5 4.0
4.0 4.0 6.0 6.0
6.0 6.0 7.5 8.0
8.0 8.0 9.0 8.0

189
 TECHNICAL INFORMATION

REPLACEMENT GUIDE

I-25 GEAR DRIVEN ROTARY SPRINKLER I-40 GEAR DRIVEN ROTARY SPRINKLERS

To Replace Use Hunter Nozzle To Replace Use Hunter Nozzle

RAIN BIRD® RAIN BIRD®
FALCON 4 (Black) 4 (Yellow) 41-51A 18 x 11.5 23 (Dk. Green)
6 (Lt. Blue) 5 (White) 41-51A 13 x 11 15 (Grey)
8 (Dk. Green) 7 (Orange) 47A-SAM 16 13 (Lt. Blue)
10 (Grey) 8 (Lt. Brown) 37A 14 10 (Lt. Green)
12 (Beige) 10 (Lt. Green) 65 SERIES 16 13 (Lt. Blue)
14 (Lt. Green) 13 (Lt. Blue) 8005 12 (Beige) 10 (Lt. Green)
16 (Dk. Brown) 18 (Red) 14 (Lt. Green) 15 (Grey)
18 (Dk. Blue) 20 (Dk. Brown) 16 (Dk. Brown) 15 (Grey)
41-51A 18 x 11.5 20 (Dk. Brown) 18 (Dk. Blue) 23 (Dk. Green)
41-51A 13 x 11 13 (Lt. Blue) 20 (Red) 25 (Dk. Blue)
47A 16 13 (Lt. Blue) 22 (Yellow) 25 (Dk. Blue)
37A 14 8 (Lt. Brown) TALON 14 13 (Lt. Blue)
7005 4 (Black) 4 (Yellow) 16 10 (Lt. Green)
6 (Lt. Blue) 5 (White) 18 23 (Dk. Green)
8 (Dk. Green) 8 (Lt. Brown) 20 25 (Dk. Blue)
10 (Grey) 10 (Lt. Green) 22 25 (Dk. Blue)
12 (Beige) 13 (Lt. Blue)
14 (Lt. Green) 15 (Grey)
To Replace Use Hunter Nozzle
16 (Dk. Brown) 18 (Red)
TORO®
18 (Dk. Blue) 20 (Dk. Brown)
8005 12 (Beige) 13 (Lt. Blue) 640 40 8 (Lt. Brown)
14 (Lt. Green) 15 (Grey) 41 10 (Lt. Green)
16 (Dk. Brown) 18 (Red) 42 13 (Lt. Blue)
18 (Dk. Blue) 20 (Dk. Brown) 43 15 (Grey)
20 (Red) 23 (Dk. Green) 44 23 (Dk. Green)
22 (Yellow) 25 (Dk. Blue)
24 (Orange) 28 (Black)
To Replace Use Hunter Nozzle
THOMPSON®
To Replace Use Hunter Nozzle 186/7 R-Nozzle 13 (Lt. Blue)
TORO® S-Nozzle 15 (Grey)
2001 6 (Yellow) 7 (Orange) T-Nozzle 15 (Grey)
9 (Red) 8 (Lt. Brown) 188/9 U-Nozzle 23 (Dk. Green)
12 (Brown) 10 (Lt. Green) V-Nozzle 25 (Dk. Blue)
18 (Blue) 18 (Red)
24 (Green) 25 (Dk. Blue)
640 40 8 (Lt. Brown)
41 10 (Lt. Green)
TECHNICAL

42 13 (Lt. Blue)
43 15 (Grey)
44 20 (Dk. Brown)

To Replace Use Hunter Nozzle

NELSON®
7000 & 7500 1 7 (Orange)
2 8 (Lt. Brown)
3 10 (Lt. Green)
4 13 (Lt. Blue)
5 15 (Grey)
6 20 (Dk. Brown)
7 23 (Dk. Green)
8 25 (Dk. Blue)

190
TECHNICAL INFORMATION

REPLACEMENT GUIDE

HQ - KEYS

To Replace To Replace To Replace To Replace Use Hunter

RAIN BIRD® TORO® BUCKNER WEST AG/STORM
33K, 33DK 075-SLK QB33K07 4C075, C075 HK-33
44K 100-SLK QB44K10 4C100, C100 HK-44
4K-Acme 100-AK QB44KAT10 4C100A, C100A HK-44A
55K-1 QB5RK10 4C101, C101 HK-55

HQ - SWIVELS

To Replace To Replace To Replace To Replace Use Hunter

RAIN BIRD® TORO® BUCKNER WEST AG/STORM
SH-0 075-75MHS HS075 4HS-075, HS075 HS-0
SH-1 075-MHS HS100 4HS-100, HS-100 HS-1
SH-2 100-MHS HS101 4HS-101, HS-101 HS-2
HS100BS 4HS-100-BS, HS-100-BS HS-1-B
HS101BS 4HS-101-BS, HS-101-BS HS-2-B

HQ - QUICK COUPLERS

To Replace To Replace To Replace To Replace Use Hunter

RAIN BIRD® TORO® BUCKNER WEST AG/STORM
3RC 075-SLSC QB3RC07 4V075-RY, QCV075-R HQ-3RC
33DRC QB33RC07 4V133-4A-RY, QCV133-4A-R HQ-33DRC
33DLRC QB33LRC07 4V133-4A-RLY, QCV133-4A-RL-2 HQ-33DLRC
33DNP QB33NP07 4V133-4A-RL-NP, QVC133-4A-N-2 HQ-33DLRC-R
44RC 100-SLSC, QB44RC10 4V144-RY, QCV-144-R HQ-44RC
44LRC 100-2SLVC QB44LRC10 4V144-RLY, QCV-144-RL HQ-44LRC
44NP 100-SLVLC QB44NO10 4V144-RL-NP, QCV-144-N HQ-44LRC-R
100-2SLLVC QB44RCATAR10 HQ-44RC-AW
QB44LRCATAR10 HQ-44LRC-AW
4NP-Acme QB44NPATAR10 HQ-44LRC-AW-R
5RC 100-ATLVC QBRB5RC10 4V101-RY, QCV-101-R HQ-5RC
5LRC QBRB5LRC10 4V101-RLY, QCV-101-RL HQ-5LRC
5NP QBRB5NP10 4V101-RL-NP, QCV-101-N HQ-5LRC-R
5RC-BSP QBRB5RC10BS 4V101-RY-BS, QCV-101-R-BS HQ-5RC-BSP
5LRC-BSP QBRB5LRC10BS 4V101-RLY-BS, QCV-101-RL-BS HQ-5LRC-BSP

TECHNICAL
5NP-BSP QBRB5NP10BS 4V101-RL-NP-BS, QCV-101-N-BS HQ-5LRC-BSPR

191
 TECHNICAL INFORMATION

PRECIPITATION RATES

In this section, the “Sprinkler Spacing Method–Any Arc and Any Spacing” equation is used to calculate precipitation rates. The first set of
equations with the ■ shows the precipitation rate for the sprinklers when they are laid out in a square pattern. The next set with the ▲
shows the precipitation rate for the sprinklers laid out in an equilateral triangular spacing pattern. This is the “Sprinkler Spacing Method–
Equilateral Triangular Spacing” equation.

WHAT IS PRECIPITATION RATE?

If someone said they were caught in a rainstorm that dropped 25mm of water in an hour, you would have some idea of how hard or
heavily the rain came down. A rainstorm that covers an area with 25mm of water in one hour has a precipitation rate of one meter per hour
(25 mm/hr). Similarly, the precipitation rate is the speed at which a sprinkler or an irrigation system applies water.

MATCHED PRECIPITATION RATES

A zone or system in which all the heads have similar precipitation rates is said to have “matched precipitation rates.” Systems that have
matched precipitation rates reduce wet and dry spots and excessive run times, which lead to high water consumption and increased costs.
Knowing that sprinkler spacing, flow rates, and arcs of coverage affect precipitation rates, a general rule of thumb is: as the spray arc
doubles, so should the flow.
90° Arc = 1 GPM; 0.23 m3/hr; 180° Arc = 2 GPM; 0.45 m3/hr; 360° Arc = 4 GPM; 0.91 m3/hr;
3.8 l/min 7.6 l/min 15.1 l/min

The flow rate of half-circle heads must be two times the flow rate of the quarter-circle heads, and the full-circle heads must have two times
the flow rate of the half-circle heads. In the illustration, the same amount of water is applied to each quarter circle area and precipitation is
therefore matched.

CALCULATING PRECIPITATION RATES

Depending upon the construction of the irrigation system, the precipitation rate may be calculated by either a Sprinkler Spacing or a Total Area method.

Sprinkler Spacing Method (■) Any Arc and Any Spacing (■):
The precipitation rate should be calculated for each
individual zone. If all sprinkler heads on the zone have P.R. (in/hr) = Flow Rate (GPM) for any Arc x 34,650
the same spacing, flow rate, and arc of coverage, use Degrees of Arc x Head Spacing (ft.) x Row Spacing (ft.)
one of the following formulas:
P.R. (mm/hr) = Flow Rate (m3/hr) for any Arc x 360,000
Degrees of Arc x Head Spacing (m) x Row Spacing (m)

P.R. (mm/hr) = Flow Rate (l/min) for any Arc x 21,600

Degrees of Arc x Head Spacing (m) x Row Spacing (m)

Sprinkler Spacing Method (▲) Equilateral Triangular Spacing (▲):

TECHNICAL

The precipitation rate should be calculated for each

individual zone. If all sprinkler heads on the zone have P.R. (in/hr) = Flow Rate (GPM) for any Arc x 34,650
the same spacing, flow rate, and arc of coverage, use Degrees of Arc x (Head Spacing)2 x 0.866
one of the following formulas:
P.R. (mm/hr) = Flow Rate (m3/hr) for any Arc x 360,000
Degrees of Arc x (Head Spacing)2 x 0.866

P.R. (mm/hr) = Flow Rate (l/min) for any Arc x 21,600

Degrees of Arc x (Head Spacing)2 x 0.866

Total Area Method

The precipitation rate for a “system” is the average
precipitation rate of all sprinklers in an area, regardless of the P.R. (in/hr) = Flow (GPM) x 96.25
spacing, flow rate, or arc for each head. The Total Area Method Total Area (ft.)
calculates all the flows of all of the heads in any given area.
P.R. (mm/hr) = Flow (m3/hr) x 1,000
Total Area (m2)

P.R. (mm/hr) = Flow (l/min) x 60

Total Area (m2)

192
TECHNICAL INFORMATION

SLOPE EQUIVALENTS/IRRIGATION

% Angle Ratio

0 0˚

10 5˚ 13 m 10: 1

20 11˚ 6 m 5: 1

30 16˚ 13 m
33 18˚ 5 m 3: 1

40 21˚ 15 m

50 26˚ 10 m 2: 1

60 30˚ 18 m
67 33˚ 15 m 1.5: 1
70 35˚ 0 m

80 38˚ 12 m

90 42˚ 0 m

100 45˚ 0 m 1: 1
200

140
190

160
180

50˚ 13 m 120
130
150
170

47˚ 13 m 110
10 m
17 m

0m

54˚ 9 m
0.5: 1 63˚ 8 m

6m
5m

52˚ 8 m
60˚
62˚

59˚

56˚
58˚

SLOPE IRRIGATION: Maximum precipitation rates for slopes in mm/hr

TECHNICAL
Soil Texture 0 to 5% Slope 5 to 8% Slope 8 to 12% Slope 12% + Slope
Cover Bare Cover Bare Cover Bare Cover Bare
Coarse sandy soils 51 51 51 38 38 25 25 13
Coarse sandy soils over compact subsoils 44 38 32 25 25 19 19 10
Light sandy loams uniform 44 25 32 20 25 15 19 10
Light sandy loams over compact subsoils 32 19 25 13 19 10 13 8
Uniform silt loams 25 13 20 10 15 8 10 5
Silt loams over compact subsoil 15 8 13 6 10 4 8 3
Heavy clay or clay loam 5 4 4 3 3 2 3 2

Notes:
Maximum precipitation rates for slopes in mm/hr
The maximum precipitation values listed below are those suggested by the United States Department of Agriculture. The values are
average and may vary with respect to actual soil condition and condition of ground cover.

193
 TECHNICAL INFORMATION

HEIGHT OF SPRAY

The trajectory and spray height of the

water stream leaving a sprinkler nozzle is HUNTER NOZZLE HEIGHT AND TRAJECTORY CHART
important information when designing and Model Nozzle No. Pressure Degrees of Max Height Distance from Head to
installing irrigation systems. bar kPa Trajectory of Spray (m) Maximum Height (m)
MP ROTATOR® 1000 2.8 275 20 0.5 Varies
2000 2.8 275 26 1.1 Varies
3000 2.8 275 26 2.0 Varies
3500 2.8 275 28 2.5 Varies
Corner 2.8 275 14 0.4 Varies
Side Strip 2.8 275 16 0.5 Varies
Left Strip 2.8 275 16 0.5 Varies
PGJ 0.75 2.8 275 10 0.6 1.2
1.0 2.8 275 10 0.6 2.4
1.5 2.8 275 10 0.9 3.7
2.0 2.8 275 15 1.5 4.9
2.5 2.8 275 12 1.5 6.1
These rotor nozzle trajectory charts are 3.0 2.8 275 15 1.5 6.1
designed to help determine how close a 4.0 2.8 275 15 1.5 6.7
sprinkler can be placed to an object such as 5.0 2.8 275 15 1.8 7.3
a fence or hedge without obstructing the PGP® RED 1.0 3.5 350 26 2.1 6.7
NOZZLES 2.0 3.5 350 26 2.1 6.7
spray pattern. All information shown is at
3.0 3.5 350 26 2.4 7.0
optimum operating pressures. 4.0 3.5 350 26 2.4 7.0
5.0 3.5 350 27 2.7 7.9
6.0 3.5 350 27 3.0 8.5
7.0 3.5 350 26 3.4 9.1
8.0 3.5 350 26 3.4 9.1
9.0 3.5 350 27 3.7 9.8
10.0 4.0 400 25 4.0 9.8
11.0 4.0 400 25 4.0 11.6
12.0 4.0 400 25 4.0 12.2
PGP LOW 4.0 3.5 350 15 1.5 6.7
ANGLE GREY 5.0 3.5 350 15 1.2 6.7
NOZZLES 6.0 3.5 350 14 1.2 6.7
7.0 3.5 350 14 1.2 6.7
8.0 3.5 350 14 1.5 7.3
9.0 3.5 350 15 1.5 7.9
10.0 4.0 400 15 1.8 9.1
PGP BLUE 1.5 3.0 300 25 2.4 7.0
NOZZLES 2.0 3.0 300 25 2.4 7.0
2.5 3.0 300 25 2.7 7.9
3.0 3.0 300 25 3.0 8.5
TECHNICAL

4.0 3.0 300 25 3.4 9.1

5.0 3.0 300 25 3.4 9.1
6.0 3.8 380 25 3.7 9.8
8.0 3.8 380 25 4.0 9.8
PGP 1.0 3.5 350 26 2.4 7.0
ULTRA/I-20 1.5 3.5 350 26 2.4 7.0
DARK BLUE 2.0 3.5 350 27 2.7 7.9
NOZZLES 3.0 3.5 350 27 3.0 8.5
3.5 3.5 350 26 3.4 9.1
4.0 3.5 350 26 3.4 9.1
6.0 3.5 350 27 3.7 9.8
8.0 4.0 400 25 4.0 9.8
PGP 1.5 3.0 300 25 2.4 7.0
ULTRA/I-20 2.0 3.0 300 25 2.4 7.0
BLUE NOZZLES 2.5 3.0 300 25 2.7 7.9
3.0 3.0 300 25 3.0 8.5
4.0 3.0 300 25 3.4 9.1
5.0 3.0 300 25 3.4 9.1
6.0 3.8 380 25 3.7 9.8
8.0 3.8 380 25 4.0 9.8

194
TECHNICAL INFORMATION

HEIGHT OF SPRAY

HUNTER NOZZLE HEIGHT AND TRAJECTORY CHART

Model Nozzle No. Pressure Degrees of Max Height Distance from Head to
bar kPa Trajectory of Spray (m) Maximum Height (m)
PGP® Ultra/I-20 2.0 LA 3.5 350 13 1.5 6.7
Low Angle 2.5 LA 3.5 350 13 1.2 6.7
Grey Nozzles 3.5 LA 3.5 350 13 1.2 6.7
4.5 LA 3.5 350 13 1.2 6.7
PGP Ultra/I-20 0.5 3.5 350 15 1.5 2.4
Short Radius 1.0 3.5 350 14 1.8 2.7
Black Nozzles 2.0 3.5 350 3 0.3 1.8
PGP Ultra/I-20 0.75 3.5 350 22 2.1 4.0
Short Radius 1.5 3.5 350 18 2.1 4.0
Black Nozzles 3.0 3.5 350 8 0.3 1.8
I-25 4 3.5 350 25 2.7 6.7
5 3.5 350 25 3.4 8.5
7 3.5 350 25 3.0 8.5
8 3.5 350 25 3.4 8.5
10 4 400 25 3.7 9.1
13 4 400 25 4.0 9.4
15 4 400 25 3.7 9.4
18 4 400 25 4.6 10.4
20 5 500 25 4.6 10.7
23 5 500 25 4.9 11.6
25 5 500 25 4.9 11.6
28 5 500 25 5.2 12.2
I-40 8 (40) 3.5 350 25 3.7 9.8
10 (41) 4 400 25 4.3 9.8
13 (42) 4 400 25 4.3 10.4
15 (43) 4 400 25 4.6 12.8
23 (44) 5 500 25 5.2 14.0
25 (45) 5 500 25 5.2 14.6
I-90 ADV 33 5.5 550 22 4.6 12.8
38 5.5 550 22 4.9 14.6
43 5.5 550 22 4.9 14.6
48 5.5 550 22 5.2 16.5
53 5.5 550 22 5.2 17.1
63 5.5 550 22 5.5 19.5
I-90 36V 33 5.5 550 22 5.2 14.0
38 5.5 550 22 5.2 15.2
43 5.5 550 22 5.2 16.5
48 5.5 550 22 5.2 17.1

TECHNICAL
53 5.5 550 22 5.2 17.7
63 5.5 550 22 5.5 18.9

195
 TECHNICAL INFORMATION

PLD CHARTS
PLD APPLICATION RATES
16 MM EMITTER FLOW RATE – 16 MM EMITTER FLOW RATE –
3.8 l/hr 2.2 l/hr
Row Emitter Spacing (m) Row Emitter Spacing (m)
Spacing (m) 0.30 0.50 Spacing (m) 0.30 0.50
0.30 42 25 0.30 24 15
0.35 36 22 0.35 21 13
0.40 32 19 0.40 18 11
0.45 28 17 0.45 16 10
0.50 25 15 0.50 15 9
0.55 23 14 0.55 13 8
0.60 21 13 0.60 12 7
Notes
Application rates in m per hour

17 MM EMITTER FLOW RATE – 17 MM EMITTER FLOW RATE – 17 MM EMITTER FLOW RATE –

3.8 l/hr 2.3 l/hr 1.5 l/hr
Row Emitter Spacing (m) Row Emitter Spacing (m) Row Emitter Spacing (m)
Spacing (m) 0.30 0.45 0.61 Spacing (m) 0.30 0.45 0.61 Spacing (m) 0.30 0.45 0.61
0.30 42 28 21 0.30 26 17 13 0.30 17 11 8
0.35 36 24 18 0.35 22 15 11 0.35 14 10 7
0.40 32 21 16 0.40 19 13 9 0.40 13 8 6
0.45 28 19 14 0.45 17 11 8 0.45 11 7 5
0.50 25 17 12 0.50 15 10 8 0.50 10 7 5
0.55 23 15 11 0.55 14 9 7 0.55 9 6 4
0.60 21 14 10 0.60 13 9 6 0.60 8 6 4

PLD EMITTER LINE MAXIMUM LENGTH CHARTS

16 MM EMITTER LINE MAX 16 MM EMITTER LINE MAX
LENGTH – 2.2 l/hr LENGTH – 3.8 l/hr
Pressure Emitter Spacing (m) Pressure Emitter Spacing (m)
(bar) 0.30 0.50 (bar) 0.30 0.50
1.0 47 73 1.0 35 54
2.0 84 131 2.0 59 91
3.0 104 162 3.0 72 112

17 MM EMITTER LINE MAX 17 MM EMITTER LINE MAX 17 MM EMITTER LINE MAX

TECHNICAL

LENGTH – 1.5 l/hr LENGTH – 2.3 l/hr LENGTH – 3.8 l/hr

Pressure Emitter Spacing (m) Pressure Emitter Spacing (m) Pressure Emitter Spacing (m)
(bar) 0.30 0.50 0.60 (bar) 0.30 0.50 0.60 (bar) 0.30 0.50 0.60
1.0 86 119 149 1.0 51 71 88 1.0 37 52 65
2.0 132 185 232 2.0 89 124 156 2.0 65 92 115
3.0 159 223 281 3.0 108 152 191 3.0 80 112 142

PLD FLOW CONVERSION CHARTS

16 MM QUICK REFERENCE 17 MM QUICK REFERENCE

CHART – l/min PER 100 M CHART – l/min PER 100 M
Emitter Emitter Spacing (m) Emitter Emitter Spacing (m)
(l/hr) 0.30 0.50 (l/hr) 0.30 0.50 0.60
2.2 12.2 7.3 1.5 8.1 5.4 4.2
3.8 21.1 12.7 2.3 12.6 8.5 6.4
3.8 20.2 13.6 10.2

196
TECHNICAL INFORMATION

DRIP CONTROL ZONE KIT CHARTS

PCZ101: Inlet pressure required for designed outlet pressure

5
Required dynamic pressure in bar

4
PCZ 1.7 bar
3
PCZ 2.7 bar
2

0
0 20 40 60 80
Design flow in liters per minute

TECHNICAL

197
 TECHNICAL INFORMATION

CONVERSION FACTORS

CONVERSION FACTORS

To Convert From To Multiply By

Area acres foot2 43560
acres meter2 4046.8
meter2 foot2 10.764
foot2 inch2 144
inch2 centimeter2 6.452
hectares meter2 10000
hectares acres 2.471
Power kilowatts horsepower 1.341
Flow foot3/minute meter3/second 0.0004719
foot3/second meter3/second 0.02832
yards3/minute meter3/second 0.01274
gallon/minute meter3/hour 0.22716
gallon/minute liter/minute 3.7854
gallon/minute liter/second 0.06309
meter3/hour liter/minute 16.645
meter3/hour liter/second 0.2774
liter/minute liter/second 60
Length foot inch 12
inch centimeter 2.54
foot meter 0.30481
kilometer miles 0.6214
miles foot 5280
miles meter 1609.34
millimeter inch 0.03937
Pressure PSI kilopascals 6.89476
PSI bar 0.068948
bar kilopascals 100
PSI feet of head 2.31
Velocity feet/second meter/second 0.3048
Volume feet3 gallon 7.481
feet3 liter 28.32
meter3 feet3 35.31
meter3 yard3 1.3087
yard3 feet3 27
yard3 gallon 202
acres/feet foot3 43,560
gallon meter3 0.003785
gallon liter 3.785
imperial gallon gallon 1.833
TECHNICAL

198
TECHNICAL INFORMATION

FRICTION LOSS CHARTS

UPCV PIPE CLASS 3 (6 BAR)

C=150 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Pipe ID 36.4 mm 46.4 mm 59.2 mm 70.6 mm 84.6 mm 103.6 mm 153.2 mm 188.2 mm
Pipe OD 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Wall Thick 1.8 mm 1.8 mm 1.9 mm 2.2 mm 2.7 mm 3.2 mm 3.4 mm 5.9 mm
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25
7.6 0.5
11.4 0.75
15.1 1 0.3 0.03
26.5 1.5 0.4 0.06 0.2 0.02
34.1 2 0.5 0.09 0.3 0.03
41.6 2.5 0.7 0.14 0.4 0.04
49.2 3 0.8 0.20 0.5 0.06
56.8 3.5 0.9 0.27 0.6 0.08
68.1 4 1.1 0.34 0.7 0.10
83.3 5 1.3 0.52 0.8 0.16
98.4 6 1.6 0.72 1.0 0.22 0.6 0.07 0.4 0.03
117.3 7 1.9 0.96 1.1 0.30 0.7 0.09 0.5 0.04
132.5 8 2.1 1.23 1.3 0.38 0.8 0.12 0.6 0.05
151.4 9 2.4 1.53 1.5 0.47 0.9 0.14 0.6 0.06
166.6 10 2.7 1.86 1.6 0.57 1.0 0.17 0.7 0.07
181.7 11 1.8 0.68 1.1 0.21 0.8 0.09 0.5 0.04
200.6 12 2.0 0.8 1.2 0.24 0.9 0.10 0.6 0.04
215.8 13 2.1 0.93 1.3 0.28 0.9 0.12 0.6 0.05
234.7 14 2.3 1.07 1.4 0.33 1.0 0.14 0.7 0.06
249.8 15 2.5 1.21 1.5 0.37 1.1 0.16 0.7 0.06 0.5 0.02
265.0 16 1.6 0.42 1.1 0.18 0.8 0.07 0.5 0.03
283.9 17 1.7 0.47 1.2 0.20 0.8 0.08 0.6 0.03
299.0 18 1.8 0.52 1.3 0.22 0.9 0.09 0.6 0.03
318.0 19 1.9 0.57 1.3 0.24 0.9 0.10 0.6 0.04
333.1 20 2.0 0.63 1.4 0.27 1.0 0.11 0.7 0.04
348.3 21 2.1 0.69 1.5 0.29 1.0 0.12 0.7 0.05
367.2 22 2.2 0.75 1.6 0.32 1.1 0.13 0.7 0.05
382.3 23 2.3 0.82 1.6 0.35 1.1 0.14 0.8 0.05
401.3 24 1.7 0.37 1.2 0.16 0.8 0.06
416.4 25 1.8 0.40 1.2 0.17 0.8 0.06
431.5 26 1.8 0.43 1.3 0.18 0.9 0.07
450.5 27 1.9 0.47 1.3 0.19 0.9 0.07
465.6 28 2.0 0.50 1.4 0.21 0.9 0.08
484.5 29 2.1 0.53 1.4 0.22 1.0 0.08
499.7 30 2.1 0.57 1.5 0.23 1.0 0.09
583.0 35 1.7 0.31 1.2 0.12
666.2 40 2.0 0.40 1.3 0.15
749.5 45 2.2 0.50 1.5 0.19

TECHNICAL
832.8 50 1.6 0.23
916.1 55 1.8 0.27
999.3 60 2.0 0.32
1082.6 65 2.1 0.37 1.0 0.05
1165.9 70 2.3 0.42 1.1 0.06
1249.2 75 1.1 0.07
1332.5 80 1.2 0.08
1415.7 85 1.3 0.09
1499.0 90 1.4 0.10
1665.6 100 1.5 0.12 1.0 0.04
1832.1 110 1.7 0.14 1.1 0.05
1998.7 120 1.8 0.17 1.2 0.06
2165.3 130 2.0 0.20 1.3 0.07
2331.8 140 2.1 0.23 1.4 0.08
2498.4 150 2.3 0.26 1.5 0.09

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

199
 TECHNICAL INFORMATION

FRICTION LOSS CHARTS

UPCV PIPE CLASS 4 (10 BAR)

C=150 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Pipe ID 22 mm 28.4 mm 36.2 mm 45.2 mm 57 mm 67.8 mm 81.4 mm 99.4 mm 144.6 mm 180.8 mm
Pipe OD 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Wall Thick 1.5 mm 1.8 mm 1.9 mm 2.4 mm 3 mm 3.6 mm 4.3 mm 5.3 mm 7.7 mm 9.6 mm
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25 0.2 0.02
7.6 0.5 0.4 0.08
11.4 0.75 0.5 0.18
15.1 1 0.7 0.30
26.5 1.5 1.1 0.64 0.7 0.19
34.1 2 1.5 1.10 0.9 0.32
41.6 2.5 1.8 1.66 1.1 0.48 0.7 0.15
49.2 3 2.2 2.33 1.3 0.67 0.8 0.21
56.8 3.5 2.6 3.10 1.5 0.89 0.9 0.27
68.1 4 1.8 1.14 1.1 0.35 0.7 0.12
83.3 5 2.2 1.73 1.3 0.53 0.9 0.18
98.4 6 2.6 2.42 1.6 0.74 1.0 0.25 0.7 0.08
117.3 7 1.9 0.99 1.2 0.34 0.8 0.11
132.5 8 2.2 1.27 1.4 0.43 0.9 0.14
151.4 9 2.4 1.58 1.6 0.53 1.0 0.17 0.7 0.07
166.6 10 1.7 0.65 1.1 0.21 0.8 0.09
181.7 11 1.9 0.77 1.2 0.25 0.8 0.11
200.6 12 2.1 0.91 1.3 0.29 0.9 0.13
215.8 13 2.3 1.06 1.4 0.34 1.0 0.15
234.7 14 2.4 1.21 1.5 0.39 1.1 0.17
249.8 15 2.6 1.38 1.6 0.44 1.2 0.19
265.0 16 1.7 0.50 1.2 0.22 0.9 0.09
283.9 17 1.9 0.56 1.3 0.24 0.9 0.10
299.0 18 2.0 0.62 1.4 0.27 1.0 0.11
318.0 19 2.1 0.69 1.5 0.30 1.0 0.12
333.1 20 2.2 0.76 1.5 0.33 1.1 0.13
348.3 21 2.3 0.83 1.6 0.36 1.1 0.15
367.2 22 2.4 0.90 1.7 0.39 1.2 0.16
382.3 23 2.5 0.98 1.8 0.42 1.2 0.17
401.3 24 1.8 0.46 1.3 0.19
416.4 25 1.9 0.49 1.3 0.20
431.5 26 2.0 0.53 1.4 0.22 0.9 0.08
450.5 27 2.1 0.57 1.4 0.23 1.0 0.09
465.6 28 2.2 0.61 1.5 0.25 1.0 0.09
484.5 29 2.2 0.65 1.5 0.27 1.0 0.10
499.7 30 2.3 0.69 1.6 0.28 1.1 0.11 0.5 0.02
583.0 35 1.9 0.38 1.3 0.14 0.6 0.02
666.2 40 2.1 0.48 1.4 0.18 0.7 0.03
749.5 45 2.4 0.60 1.6 0.23 0.8 0.04
TECHNICAL

832.8 50 1.8 0.28 0.8 0.04

916.1 55 2.0 0.33 0.9 0.05
999.3 60 2.1 0.39 1.0 0.06
1082.6 65 2.3 0.45 1.1 0.07
1165.9 70 2.5 0.51 1.2 0.08
1249.2 75 2.7 0.58 1.3 0.09
1332.5 80 2.9 0.66 1.4 0.11
1415.7 85 3.0 0.74 1.4 0.12
1499.0 90 3.2 0.82 1.5 0.13 1.0 0.04
1665.6 100 1.7 0.16 1.1 0.05
1832.1 110 1.9 0.19 1.2 0.06
1998.7 120 2.0 0.22 1.3 0.08
2165.3 130 2.2 0.26 1.4 0.09
2331.8 140 2.4 0.30 1.5 0.10
2498.4 150 2.5 0.34 1.6 0.11

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

200
TECHNICAL INFORMATION

FRICTION LOSS CHARTS

UPVC PIPE CLASS 5 (16 BAR)

C=150 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Pipe ID 21.2 mm 27.2 mm 34 mm 42.6 mm 53.6 mm 63.8 mm 76.6 mm 93.6 mm 136.2 mm 170.2 mm
Pipe OD 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Wall Thick 1.5 mm 1.8 mm 1.9 mm 2.4 mm 3 mm 3.6 mm 4.3 mm 5.3 mm 7.7 mm 14.9 mm
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25 0.2 0.03
7.6 0.5 0.4 0.10
11.4 0.75 0.6 0.21 0.4 0.06
15.1 1 0.8 0.36 0.5 0.11 0.3 0.04
26.5 1.5 1.2 0.77 0.7 0.23 0.5 0.08 0.3 0.03
34.1 2 1.6 1.32 1.0 0.39 0.6 0.13 0.4 0.04
41.6 2.5 2.0 1.99 1.2 0.59 0.8 0.20 0.5 0.07
49.2 3 2.4 2.79 1.4 0.83 0.9 0.28 0.6 0.09
56.8 3.5 1.7 1.10 1.1 0.37 0.7 0.12
68.1 4 1.9 1.41 1.2 0.48 0.8 0.16
83.3 5 2.4 2.13 1.5 0.72 1.0 0.24
98.4 6 1.8 1.01 1.2 0.34 0.7 0.11
117.3 7 2.1 1.34 1.4 0.45 0.9 0.15
132.5 8 2.4 1.72 1.6 0.57 1.0 0.19
151.4 9 1.8 0.71 1.1 0.23
166.6 10 1.9 0.87 1.2 0.28
181.7 11 2.1 1.03 1.4 0.34 1.0 0.14
200.6 12 2.3 1.21 1.5 0.40 1.0 0.17
215.8 13 1.6 0.46 1.1 0.20
234.7 14 1.7 0.53 1.2 0.23
249.8 15 1.8 0.60 1.3 0.26
265.0 16 2.0 0.68 1.4 0.29 1.0 0.12
283.9 17 2.1 0.76 1.5 0.32 1.0 0.13
299.0 18 2.2 0.84 1.6 0.36 1.1 0.15
318.0 19 2.3 0.93 1.7 0.40 1.1 0.16
333.1 20 2.5 1.02 1.7 0.44 1.2 0.18
348.3 21 1.8 0.48 1.3 0.20
367.2 22 1.9 0.52 1.3 0.21
382.3 23 2.0 0.57 1.4 0.23
401.3 24 2.1 0.61 1.4 0.25 1.0 0.09
416.4 25 2.2 0.66 1.5 0.27 1.0 0.10
431.5 26 2.3 0.71 1.6 0.29 1.0 0.11
450.5 27 2.3 0.76 1.6 0.31 1.1 0.12
465.6 28 2.4 0.82 1.7 0.33 1.1 0.13
484.5 29 2.5 0.87 1.7 0.36 1.2 0.13
499.7 30 1.8 0.38 1.2 0.14
583.0 35 2.1 0.51 1.4 0.19
666.2 40 2.4 0.65 1.6 0.24
749.5 45 2.7 0.81 1.8 0.30

TECHNICAL
832.8 50 2.0 0.37 1.0 0.06
916.1 55 2.2 0.44 1.0 0.07
999.3 60 2.4 0.52 1.1 0.08
1082.6 65 2.6 0.60 1.2 0.10
1165.9 70 2.8 0.69 1.3 0.11
1249.2 75 3.0 0.78 1.4 0.13
1332.5 80 3.2 0.88 1.5 0.14
1415.7 85 1.6 0.16
1499.0 90 1.7 0.18
1665.6 100 1.9 0.21 1.2 0.07
1832.1 110 2.1 0.26 1.3 0.09
1998.7 120 2.3 0.30 1.5 0.10
2165.3 130 2.5 0.35 1.6 0.12
2331.8 140 2.7 0.40 1.7 0.14
2498.4 150 2.9 0.45 1.8 0.15

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

201
 TECHNICAL INFORMATION

FRICTION LOSS CHARTS

SCHEDULE 40 IPS PVC PLASTIC PIPE

C=150 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"
Pipe OD 1.315" 1.66" 2.375" 2.375" 2.375" 3.500" 4.500" 6.625" 8.625"
Pipe ID 1.049" 1.380" 2.469" 2.067" 2.469" 3.068" 4.026" 6.065" 7.981"
Pipe ID mm 26.64 35.05 40.89 52.50 62.71 77.93 102.26 154.05 202.72"
Wall Thick 0.133" 0.140" 0.145" 0.154" 0.203" 0.216" 0.237" 0.280" 0.322"
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25 0.1 0.01
7.6 0.5 0.2 0.03
11.4 0.75 0.4 0.07 0.2 0.02
15.1 1 0.5 0.12 0.3 0.03 0.2 0.01
26.5 1.5 0.7 0.25 0.4 0.07 0.3 0.03 0.2 0.01
34.1 2 1.0 0.43 0.6 0.11 0.4 0.05 0.3 0.02
41.6 2.5 1.2 0.65 0.7 0.17 0.5 0.08 0.3 0.02
49.2 3 1.5 0.92 0.9 0.24 0.6 0.11 0.4 0.03
56.8 3.5 1.7 1.22 1.0 0.32 0.7 0.15 0.4 0.04
68.1 4 2.0 1.56 1.2 0.41 0.8 0.19 0.5 0.06
83.3 5 2.5 2.36 1.4 0.62 1.1 0.29 0.6 0.09
98.4 6 1.7 0.87 1.3 0.41 0.8 0.12 0.5 0.05 0.3 0.02
117.3 7 2.0 1.16 1.5 0.55 0.9 0.16 0.6 0.07 0.4 0.02
132.5 8 2.3 1.48 1.7 0.70 1.0 0.21 0.7 0.09 0.5 0.03
151.4 9 2.6 1.84 1.9 0.87 1.2 0.26 0.8 0.11 0.5 0.04
166.6 10 2.9 2.24 2.1 1.06 1.3 0.31 0.9 0.13 0.6 0.05
181.7 11 2.3 1.26 1.4 0.37 1.0 0.16 0.6 0.05
200.6 12 2.5 1.48 1.5 0.44 1.1 0.18 0.7 0.06
215.8 13 2.7 1.72 1.7 0.51 1.2 0.21 0.8 0.07
234.7 14 3.0 1.97 1.8 0.58 1.3 0.25 0.8 0.09
249.8 15 3.2 2.24 1.9 0.66 1.3 0.28 0.9 0.10
265.0 16 2.1 0.75 1.4 0.31 0.9 0.11
283.9 17 2.2 0.84 1.5 0.35 1.0 0.12
299.0 18 2.3 0.93 1.6 0.39 1.0 0.14
318.0 19 2.4 1.03 1.7 0.43 1.1 0.15
333.1 20 2.6 1.13 1.8 0.48 1.2 0.17
348.3 21 1.9 0.52 1.2 0.18
367.2 22 2.0 0.57 1.3 0.20
382.3 23 2.1 0.62 1.3 0.21
401.3 24 2.2 0.67 1.4 0.23
416.4 25 2.2 0.72 1.5 0.25
431.5 26 2.3 0.77 1.5 0.27
450.5 27 2.4 0.83 1.6 0.29
465.6 28 1.6 0.31
484.5 29 1.7 0.33
499.7 30 1.7 0.35
583.0 35 2.0 0.47 1.2 0.12
666.2 40 2.3 0.60 1.4 0.16
TECHNICAL

749.5 45 2.6 0.74 1.5 0.20

832.8 50 2.9 0.90 1.7 0.24
916.1 55 1.9 0.29
999.3 60 2.0 0.34
1082.6 65 2.2 0.39 1.0 0.07
1165.9 70 2.4 0.45 1.0 0.08
1249.2 75 2.5 0.51 1.1 0.09
1332.5 80 2.7 0.57 1.2 0.10
1415.7 85 2.9 0.64 1.3 0.11
1499.0 90 3.0 0.71 1.3 0.12 0.8 0.03
1665.6 100 1.5 0.15 0.9 0.03
1832.1 110 1.6 0.18 0.9 0.04
1998.7 120 1.8 0.21 1.0 0.04
2165.3 130 1.9 0.25 1.1 0.05
2331.8 140 2.1 0.28 1.2 0.06
2498.4 150 2.1 0.32 1.3 0.07

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

202
TECHNICAL INFORMATION

FRICTION LOSS CHARTS

SCHEDULE 80 IPS PVC PLASTIC PIPE

C=150 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"
Pipe OD 1.315 1.660 1.900 2.375 2.875 3.500 4.500 6.625 8.625
Pipe ID 0.957 1.278 1.500 1.939 2.323 2.900 3.826 5.761 7.625
Pipe ID mm 24.31 32.46 38.10 49.25 59.00 73.66 97.18 146.33 193.68
Wall Thick 0.179 0.191 0.200 0.218 0.276 0.300 0.337 0.432 0.500
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25 0.1 0.01
7.6 0.5 0.3 0.05
11.4 0.75 0.4 0.11 0.3 0.03
15.1 1 0.6 0.19 0.3 0.05 0.2 0.02
26.5 1.5 0.9 0.40 0.5 0.10 0.4 0.04 0.2 0.01
34.1 2 1.2 0.68 0.7 0.17 0.5 0.08 0.3 0.02
41.6 2.5 1.5 1.02 0.8 0.25 0.6 0.11 0.4 0.03
49.2 3 1.8 1.43 1.0 0.35 0.7 0.16 0.4 0.05
56.8 3.5 2.1 1.90 1.2 0.47 0.9 0.21 0.5 0.06
68.1 4 2.4 2.44 1.3 0.60 1.0 0.27 0.6 0.08
83.3 5 3.0 3.69 1.7 0.90 1.2 0.41 0.7 0.12
98.4 6 2.0 1.26 1.5 0.58 0.9 0.17 0.6 0.07 0.4 0.02
117.3 7 2.3 1.68 1.7 0.77 1.0 0.22 0.7 0.09 0.5 0.03
132.5 8 2.7 2.15 1.9 0.99 1.2 0.28 0.8 0.12 0.5 0.04
151.4 9 3.0 2.68 2.2 1.23 1.3 0.35 0.9 0.15 0.6 0.05
166.6 10 2.4 1.49 1.5 0.43 1.0 0.18 0.7 0.06
181.7 11 2.7 1.78 1.6 0.51 1.1 0.21 0.7 0.07
200.6 12 2.9 2.09 1.7 0.60 1.2 0.25 0.8 0.08
215.8 13 1.9 0.69 1.3 0.29 0.8 0.10
234.7 14 2.0 0.80 1.4 0.33 0.9 0.11
249.8 15 2.2 0.91 1.5 0.38 1.0 0.13
265.0 16 2.3 1.02 1.6 0.42 1.0 0.14
283.9 17 2.5 1.14 1.7 0.47 1.1 0.16
299.0 18 2.6 1.27 1.8 0.53 1.2 0.18
318.0 19 1.9 0.58 1.2 0.20
333.1 20 2.0 0.64 1.3 0.22
348.3 21 2.1 0.70 1.4 0.24
367.2 22 2.2 0.76 1.4 0.26
382.3 23 2.3 0.83 1.5 0.28
401.3 24 2.4 0.90 1.6 0.30
416.4 25 2.5 0.97 1.6 0.33
431.5 26 1.7 0.35
450.5 27 1.8 0.38
465.6 28 1.8 0.41 1.0 0.11
484.5 29 1.9 0.43 1.1 0.11
499.7 30 2.0 0.46 1.1 0.12
583.0 35 2.3 0.61 1.3 0.16
666.2 40 2.6 0.78 1.5 0.20

TECHNICAL
749.5 45 1.7 0.25
832.8 50 1.9 0.31
916.1 55 2.1 0.37
999.3 60 2.2 0.43
1082.6 65 2.4 0.50 1.1 0.07
1165.9 70 2.6 0.57 1.2 0.08
1249.2 75 2.8 0.65 1.2 0.09
1332.5 80 3.0 0.73 1.3 0.10
1415.7 85 3.2 0.82 1.4 0.11
1499.0 90 3.4 0.91 1.5 0.12
1665.6 100 1.7 0.15 0.9 0.04
1832.1 110 1.8 0.18 1.0 0.05
1998.7 120 2.0 0.21 1.1 0.05
2165.3 130 2.1 0.25 1.2 0.06
2331.8 140 2.3 0.28 1.3 0.07
2498.4 150 2.5 0.32 1.4 0.08

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

203
 TECHNICAL INFORMATION

FRICTION LOSS CHARTS

HDPE PRESSURE PIPE PE80 SDR 17.6 PN6

C=140 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Pipe ID mm 21.40 28.40 35.40 44.20 55.80 66.40 79.80 97.40 141.80 177.20
Wall Thick 1.8 1.8 2.3 2.9 3.6 4.3 5.1 6.3 9.1 11.4
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25 0.2 0.03
7.6 0.5 0.4 0.11
11.4 0.75 0.6 0.23 0.3 0.06
15.1 1 0.8 0.40 0.4 0.10 0.3 0.03
26.5 1.5 1.2 0.84 0.7 0.21 0.4 0.07 0.3 0.02
34.1 2 1.5 1.43 0.9 0.36 0.6 0.12 0.4 0.04
41.6 2.5 1.9 2.16 1.1 0.54 0.7 0.19 0.5 0.06
49.2 3 2.3 3.03 1.3 0.76 0.8 0.26 0.5 0.09
56.8 3.5 2.7 4.03 1.5 1.01 1.0 0.35 0.6 0.12
68.1 4 3.1 5.16 1.8 1.30 1.1 0.44 0.7 0.15
83.3 5 2.2 1.96 1.4 0.67 0.9 0.23
98.4 6 2.6 2.75 1.7 0.94 1.1 0.32 0.7 0.10 0.5 0.04
117.3 7 3.1 3.66 2.0 1.25 1.3 0.42 0.8 0.14 0.6 0.06
132.5 8 3.5 4.69 2.3 1.60 1.4 0.54 0.9 0.17 0.6 0.07
151.4 9 2.5 2.00 1.6 0.68 1.0 0.22 0.7 0.09
166.6 10 2.8 2.43 1.8 0.82 1.1 0.26 0.8 0.11
181.7 11 2.0 0.98 1.2 0.32 0.9 0.14
200.6 12 2.2 1.15 1.4 0.37 1.0 0.16
215.8 13 2.4 1.34 1.5 0.43 1.0 0.18
234.7 14 2.5 1.53 1.6 0.49 1.1 0.21
249.8 15 2.7 1.74 1.7 0.56 1.2 0.24
265.0 16 2.9 1.96 1.8 0.63 1.3 0.27
283.9 17 3.1 2.20 1.9 0.71 1.4 0.30
299.0 18 3.3 2.44 2.0 0.79 1.4 0.34
318.0 19 2.2 0.87 1.5 0.37
333.1 20 2.3 0.95 1.6 0.41
348.3 21 2.4 1.04 1.7 0.45 1.2 0.18
367.2 22 2.5 1.14 1.8 0.49 1.2 0.20
382.3 23 2.6 1.24 1.8 0.53 1.3 0.22
401.3 24 2.7 1.34 1.9 0.57 1.3 0.23
416.4 25 3.8 1.44 2.0 0.62 1.4 0.25
431.5 26 2.1 0.67 1.4 0.27 1.0 0.10 0.5 0.02
450.5 27 2.2 0.71 1.5 0.29 1.0 0.11 0.5 0.02
465.6 28 2.2 0.76 1.6 0.31 1.0 0.12 0.5 0.02
484.5 29 2.3 0.81 1.6 0.33 1.1 0.13 0.5 0.02
499.7 30 2.4 0.87 1.7 0.35 1.1 0.13 0.5 0.02
583.0 35 2.8 1.15 1.9 0.47 1.3 0.18 0.6 0.03
666.2 40 3.2 1.48 2.2 0.60 1.5 0.23 0.7 0.04
749.5 45 2.5 0.75 1.7 0.28 0.8 0.05
832.8 50 2.8 0.91 1.9 0.35 0.9 0.06
TECHNICAL

916.1 55 3.1 1.09 2.1 0.41 1.0 0.07

999.3 60 3.3 1.28 2.2 0.48 1.1 0.08
1082.6 65 2.4 0.56 1.1 0.09
1165.9 70 2.6 0.64 1.2 0.10
1249.2 75 1.3 0.12
1332.5 80 1.4 0.13
1415.7 85 1.5 0.15
1499.0 90 1.6 0.16
1665.6 100 1.8 0.20 1.1 0.07
1832.1 110 1.9 0.24 1.2 0.08
1998.7 120 2.1 0.28 1.4 0.09
2165.3 130 2.3 0.33 1.5 0.11
2331.8 140 1.6 0.13
2498.4 150 1.7 0.14

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

204
TECHNICAL INFORMATION

FRICTION LOSS CHARTS

HDPE PRESSURE PIPE PE80 SDR 11 PN10

C=140 • PRESSURE LOSS (BAR/100 METERS)
Nominal Size 25 mm 32 mm 40 mm 50 mm 63 mm 75 mm 90 mm 110 mm 160 mm 200 mm
Pipe ID mm 20.40 26.20 32.60 40.80 51.40 61.40 73.60 90.00 130.80 163.60
Wall Thick 2.3 2.9 3.7 4.6 5.8 6.8 8.2 10 14.6 18.2
Flow Flow Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar Velocity bar
l/min m3/hr m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss m/s loss
3.8 0.25 0.2 0.04
7.6 0.5 0.4 0.14
11.4 0.75 0.6 0.29 0.4 0.09
15.1 1 0.8 0.50 0.5 0.15
26.5 1.5 1.3 1.06 0.8 0.31 0.5 0.11
34.1 2 1.7 1.80 1.0 0.53 0.7 0.18
41.6 2.5 2.1 2.73 1.3 0.81 0.8 0.28 0.5 0.09
49.2 3 2.5 3.82 1.5 1.13 1.0 0.39 0.6 0.13
56.8 3.5 3.0 5.08 1.8 1.50 1.2 0.52 0.7 0.17
68.1 4 2.1 1.92 1.3 0.66 0.8 0.22 0.5 0.07
83.3 5 2.6 2.91 1.7 1.00 1.1 0.34 0.7 0.11
98.4 6 3.1 4.08 2.0 1.41 1.3 0.47 0.8 0.15
117.3 7 2.3 1.87 1.5 0.63 0.9 0.20
132.5 8 2.7 2.40 1.7 0.8 1.1 0.26
151.4 9 3.0 2.98 1.9 1.00 1.2 0.32
166.6 10 2.1 1.21 1.3 0.39
181.7 11 2.3 1.45 1.5 0.47 1.0 0.20
200.6 12 2.5 1.70 1.6 0.55 1.1 0.23
215.8 13 2.8 1.97 1.7 0.64 1.2 0.27
234.7 14 3.0 2.27 1.9 0.74 1.3 0.31
249.8 15 2.0 0.84 1.4 0.35
265.0 16 2.1 0.94 1.5 0.40
283.9 17 2.3 1.05 1.6 0.44 1.1 0.18
299.0 18 2.4 1.17 1.7 0.49 1.2 0.20
318.0 19 2.5 1.30 1.8 0.54 1.2 0.23
333.1 20 2.7 1.42 1.9 0.60 1.3 0.25
348.3 21 2.8 1.56 2.0 0.66 1.4 0.27
367.2 22 2.9 1.70 2.1 0.71 1.4 0.30
382.3 23 3.1 1.84 2.2 0.78 1.5 0.32
401.3 24 2.3 0.84 1.6 0.35
416.4 25 2.3 0.91 1.6 0.37
431.5 26 2.4 0.97 1.7 0.40 1.1 0.15
450.5 27 2.5 1.04 1.8 0.43 1.2 0.16
465.6 28 2.6 1.12 1.8 0.46 1.2 0.17
484.5 29 2.7 1.19 1.9 0.49 1.3 0.19
499.7 30 2.8 1.27 2.0 0.53 1.3 0.20
583.0 35 3.3 1.69 2.3 0.70 1.5 0.26
666.2 40 2.6 0.89 1.7 0.34
749.5 45 2.9 1.11 2.0 0.42
832.8 50 3.3 1.35 2.2 0.51 1.0 0.08

TECHNICAL
916.1 55 2.4 0.61 1.1 0.10
999.3 60 2.6 0.71 1.2 0.12
1082.6 65 2.8 0.83 1.3 0.13
1165.9 70 3.1 0.95 1.4 0.15
1249.2 75 3.3 1.08 1.6 0.17
1332.5 80 1.7 0.20
1415.7 85 1.8 0.22 1.1 0.07
1499.0 90 1.9 0.24 1.2 0.08
1665.6 100 2.1 0.30 1.3 0.10
1832.1 110 2.3 0.35 1.5 0.12
1998.7 120 2.5 0.42 1.6 0.14
2165.3 130 2.7 0.48 1.7 0.16
2331.8 140 1.8 0.19
2498.4 150 2.0 0.21

Notes: Shaded area represents velocities over 1.5 m/s. Use with caution where water hammer is a concern.

205
 TECHNICAL INFORMATION

FRICTION LOSS CHARTS

TABLE OF APPROXIMATE PRESSURE LOSSES FOR PIPE FITTINGS

Steel Fitting Type ½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"

Coupling 0.18 0.24 0.30 0.37 0.46 0.61 0.76 0.91 1.21 1.82 2.40
Run of St. Tee 0.30 0.30 4.60 0.60 0.60 0.76 0.91 1.21 1.52 2.13 3.05
Tee, Side Outlet 0.91 1.38 1.50 2.13 2.74 3.35 4.0 4.90 6.1 9.44 12.1
Tee, Run Reduced ½" 0.45 0.76 0.91 1.21 1.50 1.82 2.13 2.4 3.65 4.90 6.10
Elbow, 90° 0.45 0.76 0.91 1.21 1.50 1.82 2.13 2.4 3.65 4.90 6.10
Elbow, 45° 0.22 0.30 0.40 0.52 0.60 0.76 0.91 1.06 1.5 2.28 3.04
Corporation Stop 2.74 2.74 2.74 2.74 2.74 2.74
Curb Stop 1.82 1.82 2.13 2.13 2.43 2.43

Plastic IPS or
½" ¾" 1" 1¼" 1½" 2" 2½" 3" 4" 6" 8"
kPa
bar

Copper Fitting Type

1.0 103.4
Coupling 0.46 0.76 0.91 0.91 1.22 1.82 2.13 2.43 3.359.8 5.50 7.31
1.0 96.5
Run of St. Tee 0.76 0.91 1.22 1.52 1.83 2.43 2.74 3.35 4.578.5 6.40 8.53
0.9 89.6

Check Height Setting in Meters

Tee, Side Outlet 2.13 2.74 3.65 4.57 5.48 7.31 9.14 11.0 13.717.3 21.33 27.43
0.8 82.7
Tee, Run Reduced ½" 1.06 1.37 1.82 2.43 2.74 3.35 4.26 5.18 7.316.1 10.36 13.71
0.8 75.8
Elbow, 90° 1.06 1.37 1.82 2.43 2.74 3.35 4.26 5.18 7.314.9 10.36 13.71
0.7 68.9
Elbow, 34° 0.46 0.60 0.91 1.06 1.22 1.52 2.13 2.44 3.04 4.90 6.10
0.6 62.1 3.7
Set ting
To use this chart, multiply the approximate “equivalent meter of pipe” Factory pipe pressure loss per
0.6 55.2value by the proper 2.430 m rating, then
divide by 100. The result is the fitting loss in bar; kPa. 0.5 48.3
1.2
Notes: 0.4 41.4

0.3 34.5
It is recommended that the above chart be used only when the manufacturers recommended pressure loss values are not available.
0.3 27.6

0.2 20.7
.68 .91 1.14 1.36 1.59 1.82 2.04 2.27 2.50 2.73 2.95 3.18 3.41 m3/hr
11.4 15.1 18.9 22.7 26.5 30.3 34.1 37.9 41.6 45.4 49.2 53.0 56.8 l/min

ACCESSORY PRESSURE LOSS CHARTS

HCV PRESSURE LOSS CHART SWING JOINT FRICTION LOSS

kPa

1.1
bar

1.0 103.4 9.8 0.96

1.0 96.5 8.5 0.83

0.9 89.6
Check Height Setting in Meters

7.3 0.69
Loss in bar

0.8 82.7
TECHNICAL

6.1 0.55
0.8 75.8
4.9 0.41
0.7 68.9

0.6 62.1 3.7 0.28

Setting
0.6 55.2 Factory 2.4 0.14

0.5 48.3 0
1.2
0.4 41.4 0 3.8 7.6 11.4 15.2 19 22.8 26.6 30.4 34.2 38
Flow in l/min
0.3 34.5

0.3 27.6

0.2 20.7
.68 .91 1.14 1.36 1.59 1.82 2.04 2.27 2.50 2.73 2.95 3.18 3.41 m3/hr
11.4 15.1 18.9 22.7 26.5 30.3 34.1 37.9 41.6 45.4 49.2 53.0 56.8 l/min

1.1

0.96

0.83

206
0.69
s in bar

0.55
TECHNICAL INFORMATION

WIRE DATA

STANDARD ANNEALED COPPER AT 20° C

American Metric Wire Diameter Diameter Resistance Resistance

Wire Gauge Gauge (Mils) (mm) (Per mft Ohms) (Per km Ohms)
1 289.3 7.348 0.9239 0.4065
7 7 0.448
2 257.6 6.543 0.1563 0.5128
6 6 0.6098
3 229.4 5.827 0.1971 0.6466
4 204.3 5.189 0.2485 0.8152
5 5 0.08781
5 181.9 4.62 0.3134 1.028
4.5 4.5 1.084
6 162 4.115 0.3952 1.297
4 4 1.372
7 144.3 3.665 0.4981 1.634
3.5 3.5 1.792
8 128.5 3.264 0.6281 2.061
3 3 2.439
9 114.4 2.906 0.7925 2.6
10 101.9 2.588 0.9988 3.277
2.5 2.5 3.512
11 90.7 2.3 1.26 4.14
12 80.8 2.05 1.59 5.21
2 2 5.49
13 72 1.83 2 6.56
1.8 1.8 6.78
14 64.1 1.63 2.52 8.28
1.6 1.6 8.58
15 57.1 1.45 3.18 10.4
1.4 1.4 11.2
16 50.8 1.29 4.02 13.2
1.2 1.2 15.2
17 45.3 1.15 5.05 16.6
18 40.3 1.02 6.39 21
1 1 22
19 35.9 0.912 8.05 26.4
0.9 0.9 27.1
20 32 0.813 10.1 33.2

TECHNICAL

207
 TECHNICAL INFORMATION

WIRE SIZING

REQUIRED INFORMATION
Actual one-way length of wire between the controllers and the power source or the controllers and valves
Allowable voltage loss along the wire circuit
Accumulative current flowing through the wire section being sized in amperes

RESISTANCE IS CALCULATED USING THIS FORMULA:

R = 1,000 x AVL
2L x I
R = Maximum Allowable Resistance of wire in ohms per 300 m
AVL = Allowable voltage loss
L = Wire length (one way)
I = Inrush current
AVL for controller power wire sizing is calculated by subtracting the minimum operating voltage required by the controller from the
minimum available voltage at the power source.
AVL for valve wire sizing is calculated by subtracting minimum solenoid operating voltage from controller output voltage.
This number will vary depending on the manufacturer and in some cases with line pressure.

VALVE WIRE SIZING EXAMPLE

Given: The distance from the controller to the valve is 550 m. The controller output is 24 V. The valve has a minimum operating
voltage of 20 V and an inrush current of 370 mA (0.37 A).

R = 1,000 x 4
2 (600) x 0.37

R = 4,000
444

R = 9.01 ohms/1,000 m
So, wire resistance cannot exceed 9 ohms per 300 m. Now go to table #1 and select the proper wire size. Since 1.5 mm2 gauge wire has
more resistance than 9 ohms per 300 m, choose 2.5 mm2 wire.
Table 2 is a quick reference and is set up to provide maximum wire runs given the information at the bottom of the table.
TECHNICAL

TABLE 1 - RESISTANCE OF COPPER WIRE TABLE 2- VALVE WIRE SIZING

Wire Size Resistance at 20° C (68° F) Ground Wire Control Wire

(mm2) (ohms per 1000 m) 0.5 1 1.5 2.5 4 6 6
0.5 38.4 0.5 140 190 210 235 250 260 1590
1.0 18.7 1.0 190 290 335 415 465 495 2440
1.5 13.6 1.5 208 335 397 515 595 647 3700
2.5 7.4 2.5 235 415 515 730 900 1030 5400
4.0 4.6 4.0 250 465 595 900 1175 1405 7690
6.0 3.1 6.0 260 495 647 1030 1405 1745 10530

Notes:
Maximum one-way distance in feet between controller and valve Heavy-duty solenoid: 24 VAC,
370 mA inrush current, 190 mA holding current, 60 cycles; 475 mA inrush current,
230 mA holding current, 50 cycles

208
TECHNICAL INFORMATION

ADDITIONAL DATA

WIRE SIZE REFERENCE CHART

Wire Size 25 32 40 50 63 75 90 110 160 Wire Size

(mm2) mm mm mm mm mm mm mm mm mm (mm2)
0.5 20 35 49 80 110 175 - - - 0.5
1 16 30 42 67 97 150 - - - 1
1.5 10 18 25 40 56 88 120 150 - 1.5
2.5 7 15 20 33 50 75 102 130 - 2.5
4 6 13 16 27 40 63 85 110 - 4
6 4 6 9 16 25 35 50 65 150 6

Notes:
Approximate number of wires to be installed in conduit or tubing. Maximum number of wires in conduit or sleeving

CLIMATE ETp TABLE

Climate* mm Daily

Cool Humid 2.5 to 3.8

Cool Dry 3.8 to 5.1
Warm Humid 3.8 to 5.1
Warm Dry 5.1 to 6.3
Hot Humid 5.1 to 7.6
Hot Dry 7.6 to 11.4

Notes:
* Cool = under 21˚C as an average mid-summer high
* Warm = between 21˚ and 32˚ C as mid-summer highs
* Hot = over 32˚ C
* Humid = over 50% as average mid-summer relative
humidity (dry=under 50%)

TECHNICAL

209
 STATEMENT OF WARRANTY Hunter Residential & Commercial Irrigation
Hunter Industries Incorporated (“Hunter”) warrants the following products to be free of defects in materials or workmanship under normal use in
landscape irrigation applications for the specified period of time outlined below from the original date of manufacture:

ONE ROTORS SRM MICRO Micro Sprays

YEAR

TWO ROTORS PGP®-ADJ, PGJ CONTROLLERS X-Core® and Pro-C® Families, ROAM, NODE, WVP,
YEARS WVC, PSR, Wi-Fi Kit
SPRAYS PS Ultra Family SENSORS ET System

NOZZLES Spray Nozzles, PCN, PCB, AFB MICRO ACZ, PCZ, RZWS, Point Source Emitters
MP ROTATOR® All ACCESSORIES HCV, SJ, FLEXsg, HSBE Family
VALVES PGV Family, SRV, PSR

THREE CONTROLLERS ROAM XL

YEARS

FIVE ROTORS PGP Ultra, I-20, I-25, I-35, I-40, I-60, CENTRAL IMMS® Central Control Products
YEARS and I-90 Families

SPRAYS Pro-Spray®, Pro-Spray PRS30, SENSORS Clik Sensors, Solar-Sync®, Flow-Sync®

and Pro-Spray PRS40 Families
VALVES HQ, ICV, IBV MICRO ICZ and PLD Tubing, Eco-Mat®
CONTROLLERS I-Core®/DUAL® and ACC controller
families,
ICD Decoder Products, ICR Remotes

If used for agricultural applications, Hunter limits the warranty for the product or the defective part. This warranty does not extend to
its spray, rotator and rotor products to a period of one (1) year from repairs, adjustments, or replacement of a Hunter product or part that
original date of manufacture. This agriculture limitation supersedes all results from misuse, negligence, alteration, modification, tampering, or
other warranties expressed or implied. Hunter warrants the battery improper installation and/or maintenance of the product. This warranty
life of the Wireless Rain-Clik and Wireless Solar Sync sensors for extends only to the original installer of the Hunter product. If a defect
10 years. If a defect in a Hunter product is discovered during the arises in a Hunter product during the warranty period, contact your local
applicable warranty period, Hunter will repair or replace, at its option, Hunter Authorized Distributor.

STATEMENT OF WARRANTY Hunter Golf and ST System Irrigation

Hunter will unconditionally repair, replace or repurchase, at its sole Hunter’s warranty applies only to products installed as specified and
discretion, any defective Golf or ST Product Components listed below by used as intended for irrigation purposes. Hunter’s warranty shall be
category, returned freight prepaid, within a period of: limited to defects in materials and workmanship during the warranty
period, and shall not extend to situations in which the product was
GOLF ROTOR PRODUCTS subjected to improper design, installation, operation, maintenance,
A. Three (3) years component* warranty from the date of manufacture application, abuse, improper electrical current, grounding, service
B. Five (5) years component* warranty from the date of manufacture other than by Hunter authorized agents, operating conditions
with one-for-one matching purchase of HSJ Swing Joints from other than that for which it was designed, or in systems using water
authorized Hunter Golf distributor. containing corrosive chemicals, electrolytes, sand, dirt, silt, rust or
agents that otherwise attack and degrade plastics. Hunter’s warranty
HSJ SWING JOINT, ST ROTOR, AND ST ACCESSORY PRODUCTS
does not cover component failures caused by lightning strikes,
C. Five (5) years component* warranty from the date of manufacture electrical power surges or unconditioned power supplies. If products
GOLF CONTROLLER PRODUCTS are repurchased, the price to Distributor for such products in effect at
the time of return will apply.
D. One (1) year component* warranty from the date of manufacture
COMPUTERS, PRINTERS & ACCESSORIES
E. Equipment manufacturer’s warranty (no Hunter warranty)
MAINTENANCE RADIO & BATTERY
F. Equipment manufacturer’s warranty (no Hunter warranty)

210
 ®

 Hunter’s obligation to repair, replace or repurchase its products or product components as set forth above is the sole and exclusive
warranty extended by Hunter. There are no other warranties, expressed or implied, including warranties of merchantability and
warranties of fitness for a particular purpose. Hunter will not be liable to a distributor or to any other party in strict liability, tort, contract
or any other manner for any damages caused or claimed to be caused as a result of any design of or defect in Hunter’s products, or for
any special, incidental or consequential damages of any nature.

*  Warranty covers repair, replacement or repurchase of individual defective component assemblies contained within the product. Returns
of complete finished goods are not allowed under warranty without prior approval from the Hunter Product Manager.

** Where applicable, Hunter’s statement of warranty complies with local directives.

If you have any questions concerning the warranty or its application, please email [email protected].

ASAE CERTIFICATION STATEMENT

Hunter Industries Incorporated certifies that pressure, flow rate, and radius data for these products were determined and listed in
accordance with ASAE Standard S398.1, Procedure for Sprinkler Testing and Performance Reporting, and are representative of performance
of production sprinklers at the time of publication. Actual product performance may differ from the published specifications due to normal
manufacturing variations and sample selection. All other specifications are solely the recommendation of Hunter Industries Incorporated.
 Helping our customers succeed is what drives us. While our passion
for innovation and engineering is built into everything we do, it is our
commitment to exceptional support that we hope will keep you in
the Hunter family of customers for years to come.

Gregory R. Hunter, President of Hunter Industries

Website www.hunterindustries.com |  Customer Support +1 760-744-5240  |  Technical Service +1 760-591-7383

USA HEADQUARTERS Europe Middle East

1940 Diamond Street Avda. Diagonal 523, 5°- 2° P.O. Box 2370
San Marcos, California 92078, USA Edificio Atalaya Amman, 11941, Jordan
TEL: +1 760-744-5240 08029 Barcelona, Spain TEL: +962 6-5152882
TEL: +34 9-34-94-88-81 FAX: +962 6-5152992
MEXICO MANUFACTURING
ISO 9001:2008 Certified Australia China
Calle Nordika #8615 Suite 7, 202 Ferntree Gully Road B1618, Huibin Office Bldg.
Tijuana, B.C., Mexico C.P., 22640 Notting Hill, Melbourne, Victoria 3168, Australia No.8, Beichen Dong Street
TEL: +52 664-903-1300 TEL: +61 3-9562-9918 Beijing 100101, China
FAX: +52 664-903-1325 FAX: +61 3-9558-6983 TEL/FAX: +86 10-84975146

© 2014 Hunter Industries Incorporated Please recycle. METRIC INT-910 D 09/14