12 11 10 9 8 7 6 5 4 3 2 1

H H

℄ OF ALIGNMENT
4000 2
RCC CRASH BARRIER MEDIAN RCC CRASH BARRIER KEY PLAN
NOTES :
No. STRUCTURE CHAINAGE SIZE NO. OF UNDERPASS FRL

3500
APPROACH SLAB 1.ALL DIMENSION ARE IN MM, UNLESS STATED OTHERWISE.
NO. (INSIDE FACE) SPAN ROAD LVL 2.ALL LEVELS ARE IN METERS.

700
1 VUP -- 10000 X 5740 2 0.000 6.470 3.BACK FILL FOR EARTH RETAINING STRUCTURES SHALL BE AS PER
Clause No 305.2 OF SPECIFICATION OF ROADS & BRIDGES WORK OF MOST
4.STEEL GRADE IS HYSD DEFORMED BAR OF GRADE FE500 CONFORMING
DESIGN LOADS TO IS:1786.
G DRAINAGE DRAINAGE 5.CONCRETE GRADE FOR STRUCTURAL MEMBER SHALL BE AS FOLLOWS G
SPOUT SPOUT
1) LIVE LOAD IRC 70R TRACKED, WHEELED LOAD & & 40T BOGGIE LOAD A) RCC MEMBERS - BOX - M35
2) DENSITY OF CONCRETE - RCC - 2.5T/M 3 B) PCC - LEVELLING COARSE - M10
PCC - 2.4T/M 3
3) DENSITY OF SOIL 2.0T/M 3 6.CLEAR COVER TO OUTERMOST REINF. SHALL BE AS FOLLOWS:
A) BOTTOM SLAB (EARTH FACE) - 75 mm
4) ANGLE OF INTERNAL FRICTION FOR BACK FILL 30°
RCC BOX - CELL 1 B) BOTTOM SLAB (NON-EARTH FACE) - 50 mm

10000
SLOPE 2.5% SLOPE 2.5%
5) LIVE LOAD SURCHARGE EQUIVALENT TO 1.2M HEIGHT OF EARTHFILL C) SIDE WALL (EARTH FACE) - 75 mm
D) SIDE WALL (NON-EARTH FACE) - 50 mm
E) TOP SLAB - 50 mm
7.SBC CONSIDERED IS 10 T/M² AT 1.00 m BELOW E.G.L.
32000
8.TWO COAT OF COAL TAR EPOXY PAINT TOTAL THK 210 MICRON
(ROW) SHOULD BE PROVIDED TO ALL CONCRETE SURFACE IN CONTACT

22050
F
DRAINAGE DRAINAGE WITH SOIL IN FOUNDATION & SUB STRUCTURE F
SPOUT SPOUT
9.OFFSET TO PCC SHALL BE GREATER THAN THICKNESS OF LAYER.
10.BACK FILLING SHALL BE DONE SIMULTANEOUSLY ON BOTH SIDES
AFTER THE CASTING OF TOP SLAB OF BOX AND THE DIFFERENCE
IN LEVELS ON BOTH SIDES SHALL NOT BE MORE THAN 1.0m.
600

DRAINAGE DRAINAGE
SPOUT SPOUT

32000
(ROW)
RCC BOX - CELL 2 14000 4000 14000
MEDIAN REFERENCE DRAWINGS :
RCC CRASH BARRIER
F.R.L
℄ OF ALIGNMENT
10000

DRAINAGE SPOUT WEARING COAT P.C.C FILLING

SLOPE 2.5% (65 mm Thk) SLOPE 2.5%

E E

650
REV. DATE DESCRIPTION DWG. APPD. BY
DRAINAGE
SPOUT
DRAINAGE
SPOUT
R3

5500
R2
65MM THIK.
R1
700

WEARING COURSE
UNDERPASS ROAD LVL
APPROACH SLAB
R0 31/07/2021 FOR PLANNING PURPOSE JAYDIP ARIF
3500

700
SECTION 1-1 APROVAL
2 STAMP:
D D
PLAN ℄

PROJECT
NAME:

EMPLOYER:
C C

350mm THK.
WEARING APPROACH SLAB

650
3500 CL OF VUP. COURSE

EMPLOYERS
WEARING COAT PCC CONSULTANT:
TOP SLAB
3 100 100
700
100 225 100 10000 10000 700
(CLEAR WIDTH) (CLEAR WIDTH)
75

600
100

100 Ø
5500

FILTER MEDIA FILTER MEDIA

600 THK. EPC
100 Ø SLOPE UTILITY BOX/ UTILITY BOX/ 600 THK. CONTRACTOR:
225

B B
CORRIDOR P.C.C FILLING P.C.C FILLING CORRIDOR
65MM THIK. 65MM THIK.
SLOPE
100

WEARING COURSE WEARING COURSE

CROSS CROSS
65

DRAINAGE SPOUT SLOPE SLOPE

700

SECTION 3-3 SLOPE 2.5% SLOPE 2.5%

DECK SLAB

CONSULTANT:

100MM THK.
PCC LEVELING SECTION 2-2
COURSE M15 (TYP.) VEHICULAR UNDERPASS
TITLE: GENERAL ARRANGEMENT DRAWING
A A

DRAWN BY CHECKED BY APPROVED BY SCALE DWG SIZE

JAYDIP ARIF NAVEEN 1/110,1/30 A1
DRG. NO.: SHEET NO REVISION
MBC-VUP_002 1 OF 1 R0
12 11 10 9 8 7 6 5 4 3 2 1