Mechanical Aptitude Tests

Spatial
Ability

Author : Paul Newton

Version: 2.3

Copyright www.mechanical-aptitude-tests.com 2007 76

 Mechanical Aptitude Tests
The Importance of Spatial Ability Tests
Spatial ability is required in production, technical and design jobs where plans and
drawings are used, for example; engineering, architecture, surveying and design. It is
also important in some branches of science where the ability to envisage the
interactions of 3 dimensional components is essential.

These tests bear a superficial resemblance to abstract reasoning tests, as both types of
question contain series of pictorial figures rather than words or numbers. However,
spatial ability does not involve analysis and reasoning, it is purely a test of mental
manipulation. Remember, you are not looking for the logical relationship between
figures - what you are trying to do is form mental images and visualize movement or
change between them.

Even if you are applying for a job which does not involve spatial manipulation, you
may still find it useful to work through some of these practice questions, purely as a
mental exercise.

Example Spatial Ability Test Questions

1) Which figure is identical to the first?

2) Which figure is identical to the first?

3) Which figure is identical to the first?

Copyright www.mechanical-aptitude-tests.com 2007 77

 Mechanical Aptitude Tests
4) Which group of shapes can be assembled to make the shape shown?

5) Which pattern can be folded to make the cube shown?

The answers to these questions are given at the bottom of the page.
Spatial ability questions often involve the visual assembly and the disassembly of
objects that have been rotated, which are viewed from different angles or objects that
have different markings on their surfaces.

Generally speaking, if the questions involve the manipulation of 2 dimensional

objects then they are probably fairly straightforward, but you will be challenged to
answer them all in the time you are given. If the questions involve the manipulation of
3 dimensional objects then many people find them extremely difficult. This is one
skill which can be significantly improved with practice.

Answers to Spatial Ability Questions

1) C 2) B 3) A 4) C 5) A

Copyright www.mechanical-aptitude-tests.com 2007 78

 Mechanical Aptitude Tests
Overview of Spatial Ability Tests
Shape Matching – Two Dimensional
Spatial ability questions may test either speed or power. Generally speaking, if the
questions involve the manipulation of 2 dimensional objects then they are probably
fairly straightforward, but you will be challenged to answer them all in the time you
are given.

Example Question
In this example, you are asked to look at two groups of simple, flat objects and find
pairs that are exactly the same size and shape. Each group has 25 small drawings of
these 2-dimensional objects. The objects in the first group are labelled with numbers
and are in numerical order. The objects in the second group are labelled with letters in
alphabetical order. Each drawing in the first group is exactly the same as a drawing in
the second group. The objects in the second group have been moved and some have
been rotated.

1. Which shape in Group 2 corresponds to the shape in Group 1?

Copyright www.mechanical-aptitude-tests.com 2007 79

 Mechanical Aptitude Tests

Answers

1. X 2. P 3. M 4. V
5. G 6. A 7. D 8. T
9. C 10. B 11. W 12. E
13. U 14. Y 15. F 16. S
17. H 18. K 19. J 20. L
21. O 22. N 23. Q 24. R
25. I

This is very much a speed test as you will be given far more of these questions than
you can comfortably answer in the given time. These questions use a large number of
shapes that are presented close together. Some people find this very distracting and
find it easier to work through the shapes in the second group systematically rather
than trying to look at the whole group at once.

In some questions of this type there may not be a one-to-one match and some of the
shapes in the first group may not appear in the second. The way that the question is
worded will make this clear. If this is the case then you should be especially careful to
look out for reflections in the second group. These are often put in by the test
designers to trap the unsuspecting. For example:

The shapes in Group A are rotations of each other. The shapes in Group B are also
rotations of each other. However none of the shapes in group A are rotations of those
in Group B.

Copyright www.mechanical-aptitude-tests.com 2007 80

 Mechanical Aptitude Tests
Visual Comparison – Two Dimensional
In these types of question you will be presented with a number of objects only two of
which are identical. Once again these are speed questions and you will need to work
quickly and attempt to answer as many as possible in the given time

Example Question
26. Which two pictures are identical?

Answer
26. C and E are the only two pictures which are identical

The best strategy for these types of question is to begin with the shape on the left and
work through the shapes to the right of it systematically looking for an exact match. If
there isn’t one then move on to the second shape and repeat the process. It can be
quite difficult to discipline yourself to adopt this systematic approach to these types of
question, as you may think that it is quicker just to look at all of the shapes until the
answer’ jumps out’ at you. The problem with this is that if the answer doesn’t ‘jump
out’ fairly quickly then panic sets in and you usually resort to the systematic approach
anyway.

When you are confronted with a large number of similar types of question on a single
page, the questions other than the one you are trying to answer can be distracting. It is
much easier and less mentally tiring to cover the other questions and concentrate only
on the two shapes that you are comparing.

Copyright www.mechanical-aptitude-tests.com 2007 81

 Mechanical Aptitude Tests
Group Rotation – Two dimensional
This is slightly more complex than the rotations in the two-dimensional shape
matching question.

27. Which of the Answer Figures is a rotation of the Question Figure?

Answer
27. C

Once again, you need to be careful that you don’t identify reflections. The best
strategy is to choose the most asymmetrical shape in the group – in this case the
arrow. Then determine the shapes ‘clockwise’ and ‘anticlockwise’ and opposite.
Thinking in these terms is more logical than ‘right’, ‘left’ ‘above’ or ‘below’ as
‘clockwise’ etc are constant even when the figures are rotated.

In the example above, the white square is clockwise from the arrow. This means that
A, B and D cannot be rotations of the Question Figure. This leaves only C as a
possibility which can quickly be checked element by element.

Copyright www.mechanical-aptitude-tests.com 2007 82

 Mechanical Aptitude Tests
Combining Two–Dimensional Shapes
These questions show you a series of 2-dimensional shapes. One of the shapes has
been ‘cut up’ into pieces. The questions presents you with the pieces and you are
asked to work out which of the shapes has been ‘cut up’.

Example Question
28. Which of the Complete Shapes can be made from the Components shown?

Answer
28. B – is the only shape that can be made from the components shown.

The best strategy for answering these questions is to look at the Complete Shapes and
see if there are any distinct features that would make it impossible to construct such a
shape from the components. In the example above, this is not very obvious but
sometimes there are one or two shapes that can be immediately discounted on the
basis of size alone.

One thing to remember is that if the Complete Shapes don’t have any bits ‘sticking
out’ (they usually don’t) then the components must fit together so that sides of the
same length are together. This reduces the number of combinations considerably.

Copyright www.mechanical-aptitude-tests.com 2007 83

 Mechanical Aptitude Tests
Cube Views in 3-Dimensions
These questions show you several (usually 3) views of a 3-dimensional cube with
unique symbols or markings on each face and then asks you a question about it. For
example, which symbol is on the opposite face?

Example Question
29. Three views of the same cube are shown above. Which symbol is opposite the X?

Answer
29. D

Some people seem to have a natural talent for imagining objects in three dimensions
and find these questions straightforward. However, if you’re not one of them and you
find thinking in three dimensions difficult, there are other ways to get the answer.

In the question above for example, you can simply use a process of elimination. If you
can see a symbol on the same illustration as the ‘X’ then it cannot be opposite. The
second and third cubes eliminate A, B and C. This leaves only D and ‘other’ as
possibilities. D has edges shared with A and B which would be consistent with the
third cube illustrated. Therefore D is correct.

Although it is not usually specified in the instructions, it is almost always true that in
these questions each symbol is used only once. This means that even in cases where
elimination is not possible, it is sometimes quite easy to see the solution without
mentally manipulating the cube too much.

In the example above, you can simply compare the first and third illustrations. The
third illustration shows a 90 degree anti-clockwise rotation (looking at the cube from
above) of the first illustration. Therefore D must be opposite the ‘X’.

Copyright www.mechanical-aptitude-tests.com 2007 84

 Mechanical Aptitude Tests
Cubes in 2 and 3 Dimensions
These questions show a flat (2-dimensional) pattern which can be folded to make a
cube and a number of 3-dimensional cubes (usually 4). The pattern and the cubes have
symbols or marking on each face. You need to look at the pattern and decide which of
the cubes, if any, could be made from it.

Example Questions
30. Which of the cubes shown could be made from the pattern?

Answer
30. A - The key to these questions is to remember that only three faces of the cube can
be shown in the illustration, this means that you need only to consider the relationship
between the three visible elements on each cube and see if the same relationship exists
in the pattern.

The best strategy for this type of question is to call one face of the cube the ‘front’ and
then to name the other faces of the cube in relation to it. For example:

This is obviously an arbitrary decision as you could look at a cube from any side.
However, thinking of the problem this way makes it much easier to ‘see’ the
relationship between the faces of the cube. You can then: look at the front of the cube,
find that face on the pattern, use the pattern to identify the ‘top’ and eliminate any
options that do not match, use the pattern to identify the other face that touches the
‘front’ (in this example LHS) and eliminate any options that do not match.

Copyright www.mechanical-aptitude-tests.com 2007 85

 Mechanical Aptitude Tests

Another type of question poses the problem the other way around. Here you have a
single 3-dimensional cube and a number of 2-dimensional patterns, only one of which
when folded, will make the cube.

31. Which of the patterns when folded will make the cube shown?

Answer
31. B - The same strategy can be used to solve these questions. Remember don’t be
intimidated by these problems even if imagining things in three dimensions does not
come easily to you. The problem can always be reduced to the relationship between
three elements, which you can then try to locate in the answer figures.

Copyright www.mechanical-aptitude-tests.com 2007 86

 Mechanical Aptitude Tests
Other Solids in 2 and 3 Dimensions
These questions are similar to the cube questions above, but rather than cubes they use
other solid shapes which may be irregular. In some respects, these questions are easier
than the cube questions as there are more relationships to work with. In other words,
each face of the solid shape has a shape of its own rather than just being square.

Example Question
32. Which of the solid shapes shown could be made from the pattern?

Answer
32. D is correct. Shape A can be eliminated because is shows an un-shaded face below
a triangular face, both of these faces (below the triangular face) are shaded on the
pattern. Shape C can be eliminated for the same reason. Shape B can be eliminated as
it has a shaded roof above the shaded side, which does not appear on the pattern.

Once again, you can reduce these problems to the relationship between the visible
elements on the 3-dimensional picture. This makes things easier because even though
the solid shape may have more faces than a cube, it is unusual for more than four
faces to be shown. This means that you need to consider the relationship between the
four visible faces, paying particular attention to shading or other patterns on them.

Copyright www.mechanical-aptitude-tests.com 2007 87

 Mechanical Aptitude Tests
Spatial Ability Questions
Spatial ability is required in technical and design jobs where drawings and plans are
used, for example; architecture, surveying, engineering, and design. It is also
important in some branches of science and technology where 3 dimensional
components are interacting.

Spatial ability questions are not routinely used in graduate and management level tests
unless the job specifically requires good spatial skills. Do not be misled by the fact
that some of these questions look similar to abstract reasoning questions. Spatial
ability questions are concerned only with your ability to mentally manipulate shapes,
not to identify patterns and make logical deductions.

Remember, employers use spatial ability questions where the job involves: drawings,
plans or the manipulation of shapes. You are not likely to be asked to mentally
manipulate three dimensional shapes unless the job requires it.

These sample question papers each contain 25 questions and have a suggested time
limit of 20 minutes each. The questions are presented in Letter/A4 format for easy
printing and self-marking.

Copyright www.mechanical-aptitude-tests.com 2007 88

 Mechanical Aptitude Tests
Spatial Ability Test 1: 45 Questions
Answer as many questions as you can in 20 minutes.

The shapes in Group 1 and Group 2 are identical, although some of them may be rotated.
Which shape in Group 2 corresponds to the shapes (1 to 25) in Group 1?

Group 1

Group 2

1) 2) 3) 4) 5)
6) 7) 8) 9) 10)
11) 12) 13) 14) 15)
16) 17) 18) 19) 20)
21) 22) 23) 24) 25)

Copyright www.mechanical-aptitude-tests.com 2007 89

 Mechanical Aptitude Tests
In the figures shown below, one of the shapes (A-D) is identical to the first figure but has
been rotated.

26) Which figure is identical to the first?

A B C D
27) Which figure is identical to the first?

A B C D
28) Which figure is identical to the first?

A B C D
29) Which figure is identical to the first?

A B C D
30) Which figure is identical to the first?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 90

 Mechanical Aptitude Tests
31) Which group of shapes can be assembled to make the shape shown?

A B C D

32) Which group of shapes can be assembled to make the shape shown?

A B C D

33) Which group of shapes can be assembled to make the shape shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 91

 Mechanical Aptitude Tests
34) Which shape can be assembled using all of the individual shapes shown?

A B C D
35) Which shape can be assembled using all of the individual shapes shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 92

 Mechanical Aptitude Tests

Which pattern can be folded to make the cube shown?

36)

A B C D

37)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 93

 Mechanical Aptitude Tests

38)

A B C D

39)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 94

 Mechanical Aptitude Tests

The drawings show a sheet of paper which has been folded. The dashed lines indicate the
whole sheet, each drawing represents a single fold. The black square shows where a hole
was punched. Where do the holes appear when the sheet is unfolded?

40)

A B C D
2C,5C 2D,5D 3D,3D 2C,2D

A B C D

41)

A B C D
1B,1C,5B,5C 2B,2C,5B,5C 1B,2C,6B,6C 1B,1C,6B,6C

A B C D

42)

A B C D
3A,2A,6D 3A,5A,6D 3A,5A,3D 3A,2A

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 95

 Mechanical Aptitude Tests

43) Officer Perez is in Tosh St with City Hall to her right. What direction is she facing?

A B C D
North South East West

44) She turns and walks to the junction with West St. She then turns right and walks to the
next junction before turning left. Where is location ‘O’ in relation to her position?

A B C D
North South East West

45) Officer Martinez starts from location ‘M’ and proceeds as follows: left onto Valencia
Av - heading East, second left - heading North, second right - heading East, second
left - heading North. He proceeds North for two blocks. What is his location?

A B C D
N O R P

End of Spatial Ability - Test 1

Copyright www.mechanical-aptitude-tests.com 2007 96

 Mechanical Aptitude Tests
Spatial Ability Test 2: 45 Questions
Answer as many questions as you can in 20 minutes.

The shapes in Group 1 and Group 2 are identical, although some of them may be rotated.
Which shape in Group 2 corresponds to the shapes (1 to 25) in Group 1?

Group 1

Group 2

1) 2) 3) 4) 5)
6) 7) 8) 9) 10)
11) 12) 13) 14) 15)
16) 17) 18) 19) 20)
21) 22) 23) 24) 25)

Copyright www.mechanical-aptitude-tests.com 2007 97

 Mechanical Aptitude Tests
In the figures shown below, one of the shapes (A-D) is identical to the first figure but has
been rotated.

26) Which figure is identical to the first?

A B C D
27) Which figure is identical to the first?

A B C D
28) Which figure is identical to the first?

A B C D
29) Which figure is identical to the first?

A B C D
30) Which figure is identical to the first?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 98

 Mechanical Aptitude Tests
31) Which group of shapes can be assembled to make the shape shown?

A B C D

32) Which group of shapes can be assembled to make the shape shown?

A B C D

33) Which group of shapes can be assembled to make the shape shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 99

 Mechanical Aptitude Tests
34) Which shape can be assembled using all of the individual shapes shown?

A B C D
35) Which shape can be assembled using all of the individual shapes shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 100

 Mechanical Aptitude Tests

Which pattern can be folded to make the cube shown?

36)

A B C D

37)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 101

 Mechanical Aptitude Tests

38)

A B C D

39)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 102

 Mechanical Aptitude Tests

The drawings show a sheet of paper which has been folded. The dashed lines indicate the
whole sheet, each drawing represents a single fold. The black square shows where a hole
was punched. Where do the holes appear when the sheet is unfolded?

40)

A B C D
1A,3B,4A,6B 1A,3A,4A,6A 1A,2A,4A,6A 1A,2A,4A,5A

A B C D

41)

A B C D
4B,4C,3D,4D 4B,4C,2D,2D 4B,4D,2D,3D 4B,4C,2D,3D

A B C D

42)

A B C D
4A,5A,6B,6C 4A,5B,6B,6C 4A,5A,6C,6D 4A,5B,6C,6D

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 103

 Mechanical Aptitude Tests

43) Officer Wu is in Green St and can see the Town Hall to her right. What direction is
location ‘N’ in relation to her position?

A B C D
South South East South West North East

44) She turns and walks to the junction with Main St. She turns right and proceeds four
blocks before turning right and then taking the next right. Which location is nearest to
her current position?

A B C D
P N O M

45) Officer Jones starts from location ‘R’ and proceeds as follows: right onto Knight St -
heading South, first left - heading East, second right - heading South, second left -
heading East. He proceeds East for one block. Where is location ‘P’ in relation to his
current position?

A B C D
North North East North West East

End of Spatial Ability - Test 2

Copyright www.mechanical-aptitude-tests.com 2007 104

 Mechanical Aptitude Tests
Spatial Ability Test 3: 45 Questions
Answer as many questions as you can in 20 minutes.

The shapes in Group 1 and Group 2 are identical, although some of them may be rotated.
Which shape in Group 2 corresponds to the shapes (1 to 25) in Group 1?

Group 1

Group 2

1) 2) 3) 4) 5)
6) 7) 8) 9) 10)
11) 12) 13) 14) 15)
16) 17) 18) 19) 20)
21) 22) 23) 24) 25)

Copyright www.mechanical-aptitude-tests.com 2007 105

 Mechanical Aptitude Tests
In the figures shown below, one of the shapes (A-D) is identical to the first figure but has
been rotated.

26) Which figure is identical to the first?

A B C D
27) Which figure is identical to the first?

A B C D
28) Which figure is identical to the first?

A B C D
29) Which figure is identical to the first?

A B C D
30) Which figure is identical to the first?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 106

 Mechanical Aptitude Tests
31) Which group of shapes can be assembled to make the shape shown?

A B C D

32) Which group of shapes can be assembled to make the shape shown?

A B C D

33) Which group of shapes can be assembled to make the shape shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 107

 Mechanical Aptitude Tests
34) Which shape can be assembled using all of the individual shapes shown?

A B C D
35) Which shape can be assembled using all of the individual shapes shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 108

 Mechanical Aptitude Tests

Which pattern can be folded to make the cube shown?

36)

A B C D

37)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 109

 Mechanical Aptitude Tests

38)

A B C D

39)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 110

 Mechanical Aptitude Tests

The drawings show a sheet of paper which has been folded. The dashed lines indicate the
whole sheet, each drawing represents a single fold. The black square shows where a hole
was punched. Where do the holes appear when the sheet is unfolded?

40)

A B C D
1C,2C 1B,1D,2B,2D 1C,1E,2C,2E 1C,1D,2C,2D

A B C D

41)

A B C D
1B,2B,5B 1C,2B,5B 1C,2B,5C 1C,2C,5D

A B C D

42)

A B C D
1A,4D,6D 2A,4D,6D 3A,4D,5D 2A,4D,5D

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 111

 Mechanical Aptitude Tests

43) Patrolman Smith is facing the Anglo-American Oil Company HQ with the Axo
Insurance building behind him, which direction is he facing?

A B C D
North South East West

44) He turns and walks to the junction with Shakespeare Rd. He then turns left and walks
two blocks before turning right. Where is location ‘R’ in relation to his position?

A B C D
North South East West

45) Officer McKay starts from location ‘O’ and proceeds as follows: left onto plaza way -
heading North, second left - heading west, second left - heading south, first left -
heading east. She proceeds for one block. What is her location?

A B C D
N

End of Spatial Ability - Test 3

Copyright www.mechanical-aptitude-tests.com 2007 112

 Mechanical Aptitude Tests
Spatial Ability Test 4: 45 Questions
Answer as many questions as you can in 20 minutes.

The shapes in Group 1 and Group 2 are identical, although some of them may be rotated.
Which shape in Group 2 corresponds to the shapes (1 to 25) in Group 1?

Group 1

Group 2

1) 2) 3) 4) 5)
6) 7) 8) 9) 10)
11) 12) 13) 14) 15)
16) 17) 18) 19) 20)
21) 22) 23) 24) 25)

Copyright www.mechanical-aptitude-tests.com 2007 113

 Mechanical Aptitude Tests
In the figures shown below, one of the shapes (A-D) is identical to the first figure but has
been rotated.

26) Which figure is identical to the first?

A B C D
27) Which figure is identical to the first?

A B C D
28) Which figure is identical to the first?

A B C D
29) Which figure is identical to the first?

A B C D
30) Which figure is identical to the first?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 114

 Mechanical Aptitude Tests
31) Which group of shapes can be assembled to make the shape shown?

A B C D

32) Which group of shapes can be assembled to make the shape shown?

A B C D

33) Which group of shapes can be assembled to make the shape shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 115

 Mechanical Aptitude Tests

34) Which shape can be assembled using all of the individual shapes shown?

A B C D
35) Which shape can be assembled using all of the individual shapes shown?

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 116

 Mechanical Aptitude Tests

Which pattern can be folded to make the cube shown?

36)

A B C D

37)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 117

 Mechanical Aptitude Tests

38)

A B C D

39)

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 118

 Mechanical Aptitude Tests

The drawings show a sheet of paper which has been folded. The dashed lines indicate the
whole sheet, each drawing represents a single fold. The black square shows where a hole
was punched. Where do the holes appear when the sheet is unfolded?

40)

A B C D
1A,4C,4D,6A 1A,4C,4E,6A 1A,3C,4D,6B 1A,3C,4D,6A

A B C D

41)

A B C D
3B,3D,5D 3B,3C,5C 3B,3C,5D 3B,3D,5E

A B C D

42)

A B C D
2D,3D,6A 1D,2D,6A 2D,4D,6A 2D,4D,5A

A B C D

Copyright www.mechanical-aptitude-tests.com 2007 119

 Mechanical Aptitude Tests

43) Officer Wilkinson is in Depp St and can see the Town Hall to her right. What direction
is she facing?

A B C D
North South East West

44) She turns and walks to the junction with Main St. She turns left and proceeds two
blocks before turning right, then taking the next right, and walking half a block. Which
location is nearest to her current position?

A B C D
M N R P

45) Officer Garcia starts from location ‘N’ and proceeds as follows: right onto West St -
heading East, fourth left - heading North, first right - heading East, first right - heading
South, third right – heading West. He proceeds West for one block. Where is location
‘P’ in relation to his current position?

A B C D
North South East North East North West

End of Spatial Ability - Test 4

Copyright www.mechanical-aptitude-tests.com 2007 120

 Mechanical Aptitude Tests
Answers to Spatial Ability Tests 1-4

Question Test 1 Test 2 Test 3 Test 4

1) N M S R
2) Q W J J
3) T K P V
4) F T V T
5) X I W K
6) H Q N X
7) P S E L
8) D J M Q
9) A G U W
10) S A G G
11) V X Y Y
12) I U C O
13) E D K P
14) K O A S
15) M C T D
16) W B X N
17) B H B B
18) R Y I E
19) G P Q U
20) Y N H H
21) O V R M
22) J R O F
23) L L L I
24) U F D C
25) C E F A
26) C C B C
27) B A D B
28) A D A C
29) D C C A
30) B B C D
31) C A D C
32) B D B D
33) B D A C
34) B C C D
35) D A C B
36) A C B B
37) B D C C
38) A D A A
39) B C D D
40) B B D D
41) D D B C
42) A A A A
43) C C D B
44) C D C A
45) D A B A

Copyright www.mechanical-aptitude-tests.com 2007 121