Powerproof PU-D

ONE COMPONENT POLYURETHANE DISPERSION

DESCRIPTION
Powerproof PU-D is a single component, ready to use,
solvent free, permanent & highly elastic waterproofing
membrane. Once cured, it provides a tough membrane
able to withstand continuous cycle of weathering and
prevent water leakage.

FEATURES AND BENEFITS

• UV stable
• Paintable
• Fast curing
• Easy to apply
• For indoor and outdoor application
• Highly & Permanently elastic membrane
• Highly compatible to porous substrates i.e.
concrete, wood, fibre-cement board etc.
• High water resistant and uptake
• Seamless & Monolithic For Concealed/Buried Areas:
• Well adhering to some non-porous substrates • Buried waterproofing of roof slabs, balconies,
like G.I. sheet, PCR, acrylic and PU sealants terraces, etc.
• High in movement capability - ability to crack • Under tiling waterproofing of wet areas such as
bridge up to 2mm toilets, bathrooms, kitchens etc.

MIXING RATIO
SURFACE PREPARATION No need to add water, cement or any powder
• All surfaces must be clean, dry, free of voids, curing
compounds, loose materials, oil, grease and sealers. METHOD OF APPLICATION
• Substrate should be structurally sound before the • All detailing procedure should be in accordance to
application of Powerproof PU-D. New concrete Bostik methodology. Consult to Bostik Technical
must be fully cured for 28 days or moisture content Department prior full surface waterproofing application
should be less than 5% using Tramex moisture • Powerproof PU-D has to be stirred well with an
meter. electrical mixer for 2-3 minutes before application
• When the product becomes homogeneous,
AREAS OF APPLICATION stand it for 1-2 minutes. Apply the product using
• Roof Deck brush or roller until the surface is fully covered
• Balcony • Assure that the dry film thickness should be 0.50mm
• Terraces per coat. It is necessary to have at least 2 coats
• Canopy • Apply second coat perpendicularly on the first coat
• Facade • Second coat has to be applied within 1-2 hours (not
• Firewall later than 24 hours)
• Restoration GI sheet roofing - to prolong its service * Application for concealed or buried areas will require
life the following:
- 2mm to 10mm concrete topping - use Bostik
Ultralevel SL or self levelling compound
- 10mm to 20mm concrete topping - use Bostik
Powerfix or styrene acrylic primer
 P.A.T.S (Pretested Adhesion To Substrate) Programme
SPECIFICATIONS
Bostik offer a service in which a program has been
Colour White & Gray
established to eliminate potential field problems by
Adhesion to concrete >1.2 N / mm² pre-testing Bostik adhesives with samples of building
Viscosity 50k-55k cps materials to which the adhesive will be applied.
This service is available on large projects where
Solid Content 65 +/- 2%
pre-application testing will aid in determining the
Elongation at Break > 400% proper surface preparation method to achieve optimum
Toxicity Non-toxic adhesion. Consult a Bostik representative for further
information.
Flammability Non-flammable
HEALTH AND SAFETY
TOOLS This product is not classified as Dangerous Good or
Paint Brush or Roller. Hazardous Substance according to ADG Code and work
safe Australia respectively. The product however, should
PACKAGING be used in accordance with good occupational, health
Available in 4 liter gallon and 16 liter pail. and safety practices. May cause irritation if swallowed,
moderately irritating to eyes. Repeated or prolonged
STORAGE skin contact may lead to irritation. High concentrations
• They should be protected for water and adverse of vapor may irritate respiratory tract. Release methyl
weather conditions. ethyl ketoxime (MEK) until fully cured.
• They should be kept dry and cool on wooden pallets at
between +10°C and +25°C in moisture free conditions. Do not swallow and avoid contact with skin as this may
• The opened products should be closed immediately cause sensitization. If contact with eyes occurs, wash
and consumed first. eyes with copious quantities of water and consult a
• Maximum 3 buckets should be stocked on each other. doctor if irritation persists. For more details, refer
• Shelf life is maximum 12 months conditional to Material Safety Data Sheet.
complying with the above mentioned storage
DISCLAIMER:
conditions.
The information in this Technical Data Sheet is intended for the assistance
of users and is of a general nature. It reflects the extent of our knowledge
and experience of our products and is based on tests which we believe to be
reliable. However, no guarantee of accuracy can be given due to the wide range
CLEAN UP of surfaces, environmental and field conditions and variations encountered in
Powerproof PU-D can be cleaned with water during wet raw materials, manufacturing equipment and methods at the place where the
work is performed. Some of these will be beyond our knowledge and control.
state or mechanically remove when fully cured. All tools Users are asked to make sure that the TDS in their possession is the latest issue.
and materials can be washed out with water prior cured Likewise, we recommend users carry out their own tests to determine the
suitability of the product for their particular purposes.
state.
Any claim for a defective product must be filed within 30 days of discovery of
a problem and must be submitted with written proof of purchase. Claims are
POT LIFE not transferrable or assignable and extend only to the original purchaser/user.
Bostik reserves the right to inspect alleged failure and no responsibility will be
3-4 hours after mixing
accepted unless Bostik is given the opportunity to do so. Bostik limits its liability
to the replacement of the product/s proven faulty.
COVERAGE
16L pail of Powerproof PU-D will cover 16-18 sqm at 2
coats assuming surface is flat and SSD condition

4L gallon of Powerproof PU-D will cover 4-5 sqm at 2

SHELF LIFE
NOTE: Suitable for use in potable water storage tanks
Twelve (12) months if stored in a dry place and not
under direct sunlight.

BOSTIK HOTLINE
BOSTIK PHILIPPINES, INC.
35/F Raffles Corporate Center, F. Ortigas Jr. Road,
Ortigas Business Center, Pasig City 1600, Philippines Smart help +63 2 900 5656
Tel No: +63 2 900 5656 | Fax: +63 2 900 5616