Scribd
Upload
166 views2 pages

F 7130A Power Supply Module Overview

The F 7130A power supply module converts 24 VDC input voltage to 5 VDC output voltage to power the PES H41q. It provides electrical isolation and overvoltage protection between the input and output voltages. The module has separate 5 VDC outputs for the central device/IO modules and HIBUS interface, each with current limitation and short-circuit protection. LEDs on the front indicate the input voltage and output voltages.

Uploaded by

mohamadzi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
166 views2 pages

F 7130A Power Supply Module Overview

The F 7130A power supply module converts 24 VDC input voltage to 5 VDC output voltage to power the PES H41q. It provides electrical isolation and overvoltage protection between the input and output voltages. The module has separate 5 VDC outputs for the central device/IO modules and HIBUS interface, each with current limitation and short-circuit protection. LEDs on the front indicate the input voltage and output voltages.

Uploaded by

mohamadzi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

F 7130A (0507)

F 7130A

F 7130A: Power supply module


Input voltage 24 VDC, output voltage 5 VDC
for PES H41q

PE d4

Figure 1: F 7130 A power supply module

The module supplies PES H41q with 5 VDC from a main supply of 24 VDC. It is a DC/DC con-
verter with electrical isolation between input and output voltage. The module is equipped with
overvoltage protection and current limitation. The outputs are short-circuit proof. The supply
connections are separated for the central device/IO modules and HIBUS interface.

The present input voltage (L+) and the output voltages are indicated with LEDs on the front
plate. A proper operation of the module is still assured if the LED 5 V CPU/EA illuminates only
slightly.

The power supply for the monitoring of the central device is fed separately via pin z16 (NG).

Operating data 24 VDC, -15...+20 %, rpp < 15 %


Primary fuse 5 A gL
Outputs for
central device/IO-modules 5 VDC, ± 0.25 V / 10 A
HIBUS 5 VDC, ± 0.25 V / 1 A
Efficiency rate ≥ 70 %
Space requirement 4 SU

All rights reserved. Equipment subject to change without notice: 1/2


HIMA Paul Hildebrandt GmbH + Co KG, P.O. Box 1261, 68777 Brühl
F 7130A (0507)

2/2

You might also like