Scribd
Upload
270 views1 page

TS 0071

This document records calibration information for outside micrometers. It includes fields to record the micrometer type, serial number, calibration interval, procedure used, ambient temperature, dates calibrated, standard values measured, any comments, and the next calibration date. The calibration process involves checking the anvil and thimble against gauge blocks or other standards and recording the measured values.

Uploaded by

Coop StElzear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
270 views1 page

TS 0071

This document records calibration information for outside micrometers. It includes fields to record the micrometer type, serial number, calibration interval, procedure used, ambient temperature, dates calibrated, standard values measured, any comments, and the next calibration date. The calibration process involves checking the anvil and thimble against gauge blocks or other standards and recording the measured values.

Uploaded by

Coop StElzear
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Outside Micrometer Calibration Record Sheet f(x) = 0

Micrometer Trendline Equation:


Memorial University Technical Services
Document No.: TS-0071 12.00
Revision: 3
Description: Tolerance: +/- 0.0002" or +/- 0.005mm OR
TSM #:
Type: Metric Imperial Custom Tolerance: __________________________

Location: Calibration Interval: Calibration Procedure: Serial No.: 10.00

Shop: 1 Year TS-0049 _________________________________________

Ambient Temp (oC) =


Step 1 Step 2 Step 3 Step 4
Calibration Calibrated Next
In Specs. Comments: Calibration 8.00
Date: By: Anvil(s) and Ratchet Standard Measured Standard Measured
Thimble Value Value Value Value Date:

Micrometer Reading
Anv:
Anv:
Anv: 6.00

Pass Pass Anv: Yes


Fail Fail Rod: No

Rod:
4.00
Rod:
Rod:
Standard Deviation
Err:502
Parts of an Outside Micrometer 2.00
Frame Danger Zone: STDDEV > .85
Fixed anvil
Spindle
Locking lever
Sleeve
Thimble
Ratchet. 0.00
0.00 2.00 4.00 6.00 8.00 10.00 12.00

Gauge Blocks

You might also like