SC1003 

Assignment 
 
The NTU Name Card Holder has a capacity of MAX (e.g., 5 for this program) name cards. You are 
required to write a NTU Name Card Holder Management Program. The program uses an array of 
MAX structures for the name card holder. 
 
Each structure should hold: 
 
 nameCardID – It stores the name card identification number. 
 personName – It stores the name of the person in the name card. 
 companyName – It stores the name of the person’s company in the name card. 
 
A structure is defined to represent a name card record as follows: 
 
typedef struct
{
int nameCardID;
char personName[20];
char companyName[20];
} NameCard;

The  nameCardID  must  be  unique.  Therefore,  each  NameCard  structure  will  have  a  different 
number  of  nameCardID  when  it  is  created.  You  may  assume  that  the  name  of  a  person  or 
company  is  not  more  than  20  characters  long.  In  the  program,  it  should  display  a  menu  to 
support the following functions:  
 
NTU NAME CARD HOLDER MANAGEMENT PROGRAM:  
1: listNameCards() 
2: addNameCard() 
3: removeNameCard() 
4: getNameCard() 
5: quit 
 
The  program  should  execute  the  functions  (or  options)  of  its  menu.  It  will  continue  execution 
until the user selects to quit from the program.  
 
The functions are described as follows: 
 
(1) listNameCards() ‐ The function requirements are given below: 
 
 The function prints the following message when it is executed: 
"listNameCards():"  
 It prints the content of each name card in the name card holder.  
 If the name card holder is empty, the function should display the message:  
"The name card holder is empty" 
 
(2) addNameCard() ‐ The function requirements are given below: 
 
 The function prints the following message when it is executed: 
"addNameCard():"  

Page 1
  It adds a new name card into the name card holder. Before and after this function 
call, the name card holder is an array of NameCard structures stored in ascending 
order according to the integer value of nameCardID. 
 After adding the new name card, the function should display the message:  
"The name card has been added successfully"  
 If  the  name  card’s  nameCardID  has  existed  in  the  name  card  holder,  the  function 
should display the message: 
   "The nameCardID has already existed" 
The program will then ask the user select a new option for execution. 
 If name card holder is full before insertion, i.e., it is equal to the maximum capacity 
of MAX (e.g., 5), the function should display the message: 
"The name card holder is full" 
and no addition should be done.  
 
(3) removeNameCard() ‐ The function requirements are given below:  
 
 The function prints the following message when it is executed: 
"removeNameCard():"  
 It removes the first appearance of the target person name of the name card from 
the name card holder.  
 The string matching between the target and person name of the name card stored 
in the name card holder should be done irregardless of the letter cases (upper case 
letter  and  lower  case  letter  will  be  treated  to  be  the  same).  As  such,  when  doing 
target  string  matching,  all  characters  in  the  string  should  be  converted  into  lower 
case or upper case before matching. 
 Before  and  after  this  function  call,  the  name  card  holder  is  an  array  of  structures 
stored in ascending order according to the integer value of nameCardID.  
 After the name card is removed, the function should display the message:  
"The name card is removed"  
and the contents of the corresponding name card should be displayed. 
 If  the  name  card  holder  is  empty  before  removal,  the  function  should  display  the 
message:  
"The name card holder is empty"  
and no removal should be done.  
 If target person name does not exist in the name card holder, the function should 
display the error message: 
"The target person name is not in the name card holder" 
 
(4) getNameCard() ‐ The function requirements are given below:   
 
 The function prints the following message when it is executed: 
"getNameCard():"  
 It finds the first appearance of the target person name of the name card stored in 
the name card holder, and prints the target name card information to the screen.  
 The  target  string  matching  should  be  done  irregardless  of  the  letter  cases  (upper 
case letter and lower case letter will be treated to be the same). 
 If  the  target  person  name  is  found  in  the  name  card  holder,  the  function  should 
display the message: 
 "The target person name is found"  
and display the contents of the corresponding name card. 

Page 2
  If  the  target  person  name  does  not  exist  in  the  name  card  holder,  the  function 
should issue the message:  
"The target person name is not found" 
 
You  are  required  to  write  the  program  and  the  functions  according  to  the  program 
requirements. Note that: 
 
 You  should  design  the  program  and  define  the  functions  according  to  the 
requirements. 
 You only need to consider the requirements stated in the program specification, and 
you  do  not  need  to  implement  any  user  input  checking  which  is  not  stated  in  the 
specification. 
 You may add any other supporting functions in the program if needed. 
 You may include any C library functions in your program if needed. 
 Sample test case are given below. 
 
A sample program running session is given below (please note that the input data are shown 
in orange color): 

NTU NAME CARD HOLDER MANAGEMENT PROGRAM:

1: listNameCards()
2: addNameCard()
3: removeNameCard()
4: getNameCard()
5: quit
Enter your choice:
1
listNameCards():
The ncHolder is empty
Enter your choice:
2
addNameCard():
Enter nameCardID:
1
Enter personName:
SC Hui
Enter companyName:
NTU
The name card has been added successfully
Enter your choice:
2
addNameCard():
Enter nameCardID:
9
Enter personName:
PC Leong
Enter companyName:
NTU
The name card has been added successfully
Enter your choice:
1
listNameCards():
nameCardID: 1
personName: SC Hui

Page 3
 companyName: NTU
nameCardID: 9
personName: PC Leong
companyName: NTU
Enter your choice:
5
 
The test cases for the program are given below. The test cases are organized in the form of 
input and output data for the convenience of your testing in APAS. 
 
Sample Test Cases (Pretest) 
 
Case 1 ‐ listNameCard – empty 
 
Input Output
1 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
5 1: listNameCards()
2: addNameCard()
3: removeNameCard()
4: getNameCard()
5: quit
Enter your choice:
listNameCards():
The name card holder is empty
Enter your choice:

Case 2 – addNameCard (3 cards) + listNameCard

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
7 Enter personName:
Philip Fu Enter companyName:
NTU The name card has been added successfully
1 Enter your choice:
5 addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
listNameCards():
nameCardID: 5
personName: WC Tan
companyName: NTU

Page 4
 nameCardID: 7
personName: Philip Fu
companyName: NTU
nameCardID: 9
personName: PC Leong
companyName: NTU
Enter your choice:

Case 3 – addNameCard (3 cards and existed) + listNameCard

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
7 Enter personName:
Philip Fu Enter companyName:
NTU The name card has been added successfully
1 Enter your choice:
2 addNameCard():
5 Enter nameCardID:
Peter Chan Enter personName:
SMU Enter companyName:
5 The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
listNameCards():
nameCardID: 5
personName: WC Tan
companyName: NTU
nameCardID: 7
personName: Philip Fu
companyName: NTU
nameCardID: 9
personName: PC Leong
companyName: NTU
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The nameCardID has already existed
Enter your choice:

Case 4 – addNameCard (5 cards) + listNameCard

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
1 1: listNameCards()

Page 5
SC Hui 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
9 5: quit
PC Leong Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
5 Enter personName:
WC Tan Enter companyName:
NTU The name card has been added successfully
2 Enter your choice:
7 addNameCard():
Philip Fu Enter nameCardID:
NTU Enter personName:
2 Enter companyName:
3 The name card has been added successfully
Daniel Foo Enter your choice:
SMU addNameCard():
1 Enter nameCardID:
5 Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
listNameCards():
nameCardID: 1
personName: SC Hui
companyName: NTU
nameCardID: 3
personName: Daniel Foo
companyName: SMU
nameCardID: 5
personName: WC Tan
companyName: NTU
nameCardID: 7
personName: Philip Fu
companyName: NTU
nameCardID: 9
personName: PC Leong
companyName: NTU
Enter your choice:

Case 5 – addNameCard (full condition) + listNameCard

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
1 1: listNameCards()
SC Hui 2: addNameCard()
NTU 3: removeNameCard()

Page 6
2 4: getNameCard()
9 5: quit
PC Leong Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
5 Enter personName:
WC Tan Enter companyName:
NTU The name card has been added successfully
2 Enter your choice:
7 addNameCard():
Philip Fu Enter nameCardID:
NTU Enter personName:
2 Enter companyName:
3 The name card has been added successfully
Daniel Foo Enter your choice:
SMU addNameCard():
1 Enter nameCardID:
2 Enter personName:
11 Enter companyName:
Kenny Tay The name card has been added successfully
SMU Enter your choice:
5 addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
listNameCards():
nameCardID: 1
personName: SC Hui
companyName: NTU
nameCardID: 3
personName: Daniel Foo
companyName: SMU
nameCardID: 5
personName: WC Tan
companyName: NTU
nameCardID: 7
personName: Philip Fu
companyName: NTU
nameCardID: 9
personName: PC Leong
companyName: NTU
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card holder is full
Enter your choice:

Page 7
Case 6 – removeNameCard (empty)

Input Output
1 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
3 1: listNameCards()
SC Hui 2: addNameCard()
5 3: removeNameCard()
4: getNameCard()
5: quit
Enter your choice:
listNameCards():
The name card holder is empty
Enter your choice:
removeNameCard():
Enter personName:
The name card holder is empty
Enter your choice:

Case 7 – removeNameCard (exact string matching & found removed)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
Daniel Foo Enter companyName:
SMU The name card has been added successfully
3 Enter your choice:
WC Tan addNameCard():
5 Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
removeNameCard():
Enter personName:
The name card is removed
nameCardID: 5
personName: WC Tan
companyName: NTU
Enter your choice:

Case 8 – removeNameCard (mixed case string matching & found removed)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()

Page 8
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
Daniel Foo Enter companyName:
SMU The name card has been added successfully
3 Enter your choice:
Wc tan addNameCard():
5 Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
removeNameCard():
Enter personName:
The name card is removed
nameCardID: 5
personName: WC Tan
companyName: NTU
Enter your choice:

Case 9 – removeNameCard (not found)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
Daniel Foo Enter companyName:
SMU The name card has been added successfully
3 Enter your choice:
Pcc Leong addNameCard():
5 Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
removeNameCard():

Page 9
 Enter personName:
The target person name is not in the name card holder
Enter your choice:

Case 10 – removeNameCard (duplicate person name)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
PC Leong Enter companyName:
SMU The name card has been added successfully
1 Enter your choice:
3 addNameCard():
PC Leong Enter nameCardID:
SMU Enter personName:
5 Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
listNameCards():
nameCardID: 3
personName: PC Leong
companyName: SMU
nameCardID: 5
personName: WC Tan
companyName: NTU
nameCardID: 9
personName: PC Leong
companyName: NTU
Enter your choice:
removeNameCard():
Enter personName:
The name card is removed
nameCardID: 3
personName: PC Leong
companyName: SMU
Enter your choice:

Case 11 – getNameCard (found)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()

Page 10
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
PC Tan Enter companyName:
SMU The name card has been added successfully
4 Enter your choice:
WC tan addNameCard():
5 Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
getNameCard():
Enter personName:
The target person name is found
nameCardID: 5
personName: WC Tan
companyName: NTU
Enter your choice:

Case 12 – getNameCard (not found)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
PC Tan Enter companyName:
SMU The name card has been added successfully
4 Enter your choice:
pcc Leong addNameCard():
5 Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
getNameCard():
Enter personName:
The target person name is not found
Enter your choice:

Page 11
Case 13 – getNameCard (unique id with duplicated name)

Input Output
2 NTU NAME CARD HOLDER MANAGEMENT PROGRAM:
9 1: listNameCards()
PC Leong 2: addNameCard()
NTU 3: removeNameCard()
2 4: getNameCard()
5 5: quit
WC Tan Enter your choice:
NTU addNameCard():
2 Enter nameCardID:
3 Enter personName:
PC Leong Enter companyName:
SMU The name card has been added successfully
4 Enter your choice:
PC Leong addNameCard():
5 Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
addNameCard():
Enter nameCardID:
Enter personName:
Enter companyName:
The name card has been added successfully
Enter your choice:
getNameCard():
Enter personName:
The target person name is found
nameCardID: 3
personName: PC Leong
companyName: SMU
Enter your choice:

Page 12