Scribd
Upload
192 views

Tunnel - Without Invert Figure 13: Typical Tunnel Cross Section (Class I To II-B)

This document provides a cross-sectional diagram of a typical tunnel design labeled as Class I to II-B. The three sentence summary is: The cross section shows the inner lining, false ceiling space, exhaust duct, separating wall, waterproofing membrane and sidewall drainage of the tunnel. Standard dimensions are provided for elements like the clearance profile, connection pipe, cable ducts, abutment earthing and road pavement structure. The diagram labels the different areas of the tunnel including the driving lanes, safety strips, walkway and median strip.

Uploaded by

Mrigank Rockaphilics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
192 views

Tunnel - Without Invert Figure 13: Typical Tunnel Cross Section (Class I To II-B)

This document provides a cross-sectional diagram of a typical tunnel design labeled as Class I to II-B. The three sentence summary is: The cross section shows the inner lining, false ceiling space, exhaust duct, separating wall, waterproofing membrane and sidewall drainage of the tunnel. Standard dimensions are provided for elements like the clearance profile, connection pipe, cable ducts, abutment earthing and road pavement structure. The diagram labels the different areas of the tunnel including the driving lanes, safety strips, walkway and median strip.

Uploaded by

Mrigank Rockaphilics
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Figure 13: Typical Tunnel Cross Section ( Class I to II-B)

Tunnel - Without Invert


Typical Cross Section
S 1:50

Exhaust Duct

18
R6,9
False Ceiling

Space for Tunnel


Equipment
Separating Wall
Console for False Ceiiling

R8,
167 7.15 Waterproofing Membrane
18
3,7
R6,9 60 Space for Signage

Clearance Profile Axis


(Vertical) Tunnel Axis
0,75

5,5
4,5

Inner Lining BARKOT SILKYARA Inner Lining (With out


R8,167 R8,167 Reinforcement)
2,5

2,5
Clearance Profile Clearance Profile
Escape Tunnel Connection
R8,167 Road Tunnel
Pipe
2.00% 0,753
2.00% +/- 0.00 RT 2.00%
Cable Ducts (indicative) 2.00% Kerbstone

Sidewall Drainage

Sidewall Drainage
Abutment + Earthing with fitter medium
Blinding Layer Foundation for Excavate if Road Pavement
3,501 Separating Wall Required Structure
13,012
12,046
0,75 0,199 0,35 0,23,12 0,5 0,197
3,12 0,75
Seperating Wall

Driving Lane
Safety Strip

Safety Strip

Safety Strip
Walkway

Median Strip
Driving Lane Driving Lane

Walkway
Figure 13: Typical Tunnel Cross Section

You might also like