0% found this document useful (0 votes)
122 views

Hpe Proliant Dl360 Gen10 Server User Guide: Part Number: 869840-006 Published: April 2019 Edition: 6

This document provides specifications for the HPE ProLiant DL360 Gen10 Server, including: - Environmental specifications for operating temperature range of 10°C to 35°C and non-operating range of -30°C to 60°C. Relative humidity ranges from 8-90% operating and 5-95% non-operating. - Server specifications including dimensions of 4.29 cm height, 70.7 or 74.98 cm depth depending on drive cage, and 43.46 cm width. - Weight and power specifications are also provided.

Uploaded by

Gurkaran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
122 views

Hpe Proliant Dl360 Gen10 Server User Guide: Part Number: 869840-006 Published: April 2019 Edition: 6

This document provides specifications for the HPE ProLiant DL360 Gen10 Server, including: - Environmental specifications for operating temperature range of 10°C to 35°C and non-operating range of -30°C to 60°C. Relative humidity ranges from 8-90% operating and 5-95% non-operating. - Server specifications including dimensions of 4.29 cm height, 70.7 or 74.98 cm depth depending on drive cage, and 43.46 cm width. - Weight and power specifications are also provided.

Uploaded by

Gurkaran
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HPE ProLiant DL360 Gen10 Server User

Guide

Abstract
This document is for the person who installs, administers, and troubleshoots servers and storage
systems. Hewlett Packard Enterprise assumes you are qualified in the servicing of computer
equipment and trained in recognizing hazards in products with hazardous energy levels.

Part Number: 869840-006


Published: April 2019
Edition: 6
Specifications
Environmental specifications
Specification Value
Temperature range1 —
Operating 10°C to 35°C (50°F to 95°F)
Nonoperating -30°C to 60°C (-22°F to 140°F)
Relative humidity (noncondensing) —
Operating Minimum to be the higher (more moisture) of -12°C
(10.4°F) dew point or 8% relative humidity
Maximum to be 24°C (75.2°F) dew point or 90%
relative humidity

Nonoperating 5% to 95%
38.7°C (101.7°F), maximum wet bulb temperature

1 All temperature ratings shown are for sea level. An altitude derating of 1.0°C per 304.8 m (1.8°F per 1000 ft) to 3048 m
(10,000 ft) is applicable. No direct sunlight allowed. Maximum rate of change is 20°C per hour (36°F per hour). The upper
limit and rate of change might be limited by the type and number of options installed.

For certain approved hardware configurations, the supported system inlet temperature range is extended:

• 5°C to 10°C (41°F to 50°F) and 35°C to 40°C (95°F to 104°F) at sea level with an altitude derating of 1.0°C
per every 175 m (1.8°F per every 574 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).
• 40°C to 45°C (104°F to 113°F) at sea level with an altitude derating of 1.0°C per every 125 m (1.8°F per
every 410 ft) above 900 m (2953 ft) to a maximum of 3048 m (10,000 ft).

The approved hardware configurations for this system are listed on the Hewlett Packard Enterprise
website.

Server specifications
Specification Value
Height 4.29 cm (1.69 in)
Depth (chassis with SFF drive 70.7 cm (27.83 in)
cage)
Depth (chassis with LFF drive 74.98 cm (29.50 in)
cage)
Width 43.46 cm (17.11 in)
Weights

Table Continued

160 Specifications

You might also like