EMZ6.

8N
Diodes

Zener diode
EMZ6.8N

zApplications zExternal dimensions (Unit : mm) zLand size figure (Unit : mm)
Voltage regulation
(Common anode dual chips) 1.0
1.6±0.2
0.5 0.5

0.7
0.3±0.1
　　　 0.05 0.15±0.05

1.3
zFeatures (3) 0.7

0.7
1) Ultra small mold type. (EMD3)

1.6±0.2
0.8±0.1
2) High reliability 0～0.1
0.6 0.6

0.1Min
EMD3
0.2±0.1 (2) (1)
　　-0.05
0.55±0.1
zConstruction 0.5 0.5
1.0±0.1 0.7±0.1

Silicon epitaxial planar zStructure

ROHM : EMD3
JEDEC : SOT-416
JEITA : SC-75A
dot (year week factory)

zTaping specifications (Unit : mm)

φ1.55±0.1
4.0±0.1 2.0±0.05 0.3±0.1
　　　　　 0
1.75±0.1
3.5±0.05

8.0±0.2
1.8±0.2
5.5±0.2

0～0.1

1.8±0.1 φ0.5±0.1
0.9±0.2

zAbsolute maximum ratings (Ta=25°C)

Param eter Sym bol Lim its Unit
Power dis s ipation（*1） P 150 mW
Junction tem perature Tj 150 ℃
S torage tem perature Ts tg -55 to +150 ℃
(*1) Total of 2 elem ents

zElectrical characteristics (Ta=25°C)

Param eter Sym bol Min. Typ. Max. Unit Conditions
Zener voltage VZ 6.47 - 7.14 V IZ =5m A
R evers e current IR - - 0.50 µA VR =3.5V
D ynam ic im pedance ZZ - - 40 Ω IZ =5m A

Rev.B 1/2
 EMZ6.8N
Diodes

zElectrical characteristic curves (Ta=25°C)

Ta=150℃ Ta=125℃
10 100 100
f=1MHz
10

REVERSE CURRENT:IR (nA)

Ta=75℃
ZENER CURRENT:Iz(mA)

CAPACITANCE BETWEEN
1 Ta=75℃

TERMINALS:Ct(pF)
1 Ta=25℃ Ta=125℃
0.1
Ta=25℃
10
Ta=-25℃ Ta=150℃ 0.01
0.1 Ta=-25℃
0.001

0.0001

0.01 0.00001 1
6 6.5 7 7.5 8 0 1 2 3 4 0 1 2 3 4 5 6
ZENER VOLTAGE:Vz(V)
Vz-Iz CHARACTERISTICS REVERSE VOLTAGE：VR(V) REVERSE VOLTAGE:VR(V)
VR-IR CHARACTERISTICS VR-Ct CHARACTERISTICS

7.2 0.1 20
Ta=25℃I 0.09 Ta=25℃ 19.5 Ta=25℃
Z=5mA VR=3.5V f=1MHz

BETWEENTERMINALS:Ct(pF)
0.08 19
REVERSE CURRENT:IR(nA)

7.1 n=30pcs
ZENER VOLTAGE:Vz(Ｖ)

n=30pcs VR=0V
0.07 18.5 n=10pcs

CAPACITANCE
7 0.06 18 AVE:19.06pF

0.05 17.5
6.9 0.04 17
0.03 AVE:0.0143nA 16.5
6.8 0.02 16

0.01 15.5
AVE:6.954V
6.7 0 15

Vz DISRESION MAP
Ct DISRESION MAP
IR DISRESION MAP

100 1000
Rth(j-a)
THAERMAL IMPEDANCE:Rth (℃/W)

Mounted on epoxy board

DYNAMIC IMPEDANCE:Zz(Ω)

100
TRANSIENT

Rth(j-c)
10
IM=1mA IF=100mA
10

1ms time
300us

1 1
0.1 1 10 0.001 0.01 0.11 10 100 1000
ZENER CURRENT(mA) TIME:t(s)
Zz-Iz CHARACTERISTICS Rth-t CHARACTERISTICS

Rev.B 2/2
Appendix

Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.

The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.

About Export Control Order in Japan

Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.

Appendix1-Rev1.1
www.s-manuals.com