⑴ Phone Port ⑵ Battery 8,MAC OS, Linux, Android and so on.

P21 User Manual ⑶ LAN Port ⑷ USB First Step：

Thanks for choosing P21 4G wireless router, please read and keep ⑸ DC Power ⑹ Power Switch (1) Take out the device, insert the SIM card according to the
the user’s manual carefully. It is more convenient for you to use our ⑺WLAN ON/OFF Switch ⑻ Reset Button instructions, and then use the matching power adapter to supply power
router. ⑼WPS Button ⑽ External ANT interface to the devices.
⑾SIM Card (2) Make the computer obtain IP address automatically, once the
1、Main Technology Parameters
2.3 Indicator computer get IP, input CPE IP address into the browser, press“enter”
●Working temps : -25℃ - +65℃
to access CPE home page, click “login”in upper right corner to access
●Relative humidity: 5%--95%
login page. You can get CPE default IP address 、username and

Type Status Description

All off no signal (the signal status can be checked by terminal
●Power supply : input AC :100V~240V，50Hz~60Hz configuration page)
Output DC: 12V, 1000mA One The signal is poor
SIG Two Signal is moderate

●Size:185mm*175mm*78mm Three Signal is good

All on Signal is very good
●Weight: 250g
TEL Off Phone is not used
On Dialing or making call
2、Product Nanual WPS Flicker Press WPS key for 4 seconds, then release, the WPS
lights will be flashing. If device has been connected,
2.1 Product diagram WPS light will be off. If device is always not
connected ,the light will just flashing 2min ,then to go
out
WLAN ON WIFI is opened and has data transmission

Off WIFI unopened

4G/LTE Blue Connected the internet
Yellow not connected or trying to connect SIM
password from the nameplate attached at back cover.
Off No battery
Battery
indicator Blue Battery is charging or sufficient charge
2.2 Product interface
yellow Battery low
Adapter Off Battery power supply
indicator
Blue Adapter power supply
POWER Blue On Power normal, the router power on
Blue Off Power abnormal, the router power off

Second step：
3、Quickly Config Guide Go to the “Quick Settings”
The router support standard RJ45 cable or WLAN wireless way
(1) SSID configuration, the user can customize the SSID, easy to use
to connect computer, Support Windows XP, Windows 7,Windows
and memory. Computer local connection Check if the computer's network card
is not displayed, can not is up and the computer has obtained
successfully PING IP the IP address. The computer is best
address of the device, can set to automatically obtain IP (DHCP
not open the WEB page. need to open the device, the default is
open), if it is manually set, make sure
that the set IP address and the device
in the same network segment.
The device is working but Set the computer to automatically
can not access the internet obtain the IP address and DNS server
through the web address.
Change admin page login Long press the reset button for more

1 x LAN Port Cable(RJ45) 1 x P21 User Manual password or SSID than 7 seconds to restore the factory
(2) WiFi password settings, the user can customize the WiFi encryption password, but forget settings, and then from the rear body
mode, and set their own password to prevent others from stealing the 5、Precautions password nameplate for relevant information.
traffic and to protect the security of the account. (1) When you remove and insert the SIM card ,please ensure the
device without power. FCC WARNING
(2) Do not use the equipment in case of lightning weather and This device complies with part 15 of the FCC Rules.
unplug the external antenna and power adapter. Operation is subject to the following two conditions: (1)
(3) If the device working fine, you’d better not change the this device may not cause harmful interference, and (2)
parameter or other function, if you changed it and cannot access this device must accept any interference received,
Internet or have poor experience, please press and hold the reset including interference that may cause undesired operation.
button for more than 7 seconds to restore the factory settings. Any changes or modifications not expressly approved by
the party responsible for compliance
6、Common faults and treatment methods could void the user's authority to operate the equipment.
Common faults Treatment methods
The device is powered on Check the line connection is correct, NOTE: This equipment has been tested and found to
but the front panel power the outlet is energized, the power comply with the limits for a Class B digital device,
(3) Preview the contents of the config, make sure it is correct and click pursuant to Part 15 of the FCC Rules. These limits are
light is off. adapter is consistent with the
“apply”. designed to provide reasonable protection against harmful
nameplate power supply.
The power light is normal Battery power is too low, can not interference in a residential installation. This equipment
and the battery light is meet the equipment power supply, generates, uses and can radiate radio frequency energy
4、Package Contents yellow, and the system does then please plug in external power. and, if not installed and used in accordance with the
1 x P21 Router 1 x Power Adaptor instructions, may cause harmful interference to radio
not operate properly.
communications. However, there is no guarantee that receiver. radiator your body: Use only the supplied antenna.
interference will not occur in a particular installation. -- Connect the equipment into an outlet on a circuit FCC ID: 2AT35-P21
If this equipment does cause harmful interference to radio different
or television reception, from that to which the receiver is connected.
which can be determined by turning the equipment off -- Consult the dealer or an experienced radio/TV
and on, the user is encouraged to try to correct the technician for help.
interference by one or more of the following measures: To maintain compliance with FCC’s RF Exposure
-- Reorient or relocate the receiving antenna. guidelines, This equipment should be installed and
-- Increase the separation between the equipment and operated with minimum distance between 20cm the