Scribd
Upload
105 views

Pen Sizes and Line Types

The document summarizes pen sizes and line types for technical drawings as defined by ISO standards. It lists the standard line widths that increase by a factor of 2 and are assigned color codes corresponding to lettering stencils. Line types include continuous thick and thin, dashed medium, and various chain lines for thin or thick segments used for hidden outlines, centerlines, cutting planes, and other applications.

Uploaded by

Kaizer Sky Montealegre
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
105 views

Pen Sizes and Line Types

The document summarizes pen sizes and line types for technical drawings as defined by ISO standards. It lists the standard line widths that increase by a factor of 2 and are assigned color codes corresponding to lettering stencils. Line types include continuous thick and thin, dashed medium, and various chain lines for thin or thick segments used for hidden outlines, centerlines, cutting planes, and other applications.

Uploaded by

Kaizer Sky Montealegre
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Pen Sizes and Line Types

The ISO defines a set of standard metric line widths for drafting.

Like the ISO A and B series sheet sizes, the pen sizes increase by a factor of 2. This allows
additions and corrections to be made on the enlargements or reductions of drawings.

Each width is assigned a color code. The color code corresponds to that for the matching
lettering stencil.

Line widths and color codes are standardized across all manufacturers.

Line Types

Letter Type of Line Line Thickness Application


(mm)
    A0 A1 A2  
A3
A4
A Continuous - thick 0.7 0.5 0.35  Visible outlines

 
B Continuous - thin 0.35 0.25 0.18  Fictitious outlines
 Imaginary intersection of
surfaces
 Dimension lines,
  projection lines,
intersection lines and
leaders
 Hatching
 Outlines of revolved
sections
 Adjacent parts and tooling
 Fold and tangent bend
lines
 Short centerlines

C Continuous - thin, freehand or 0.35 0.25 0.18  Indication of repeated


ruled with zig-zag detail
 Break lines (other than on
an axis)

 
D Dashed - medium 0.50 0.35 0.25  Hidden outlines

 
E Chain - thin 0.35 0.25 0.18  Centerlines
 Pitch lines
 Alternative position of
moving part
 Path lines for indicating
  movement
 Features in front of a
cutting plane
 Developed views
 Material to be removed

F Chain - thick at ends and at 0.7 0.5 0.35  Cutting planes


change of direction, thin 0.35 0.25 0.18
elsewhere
 
G Chain - thick 0.7 0.5 0.35  Indication of surfaces to
meet special requirements

You might also like