Scribd
Upload
106 views1 page

PWPS Vahali 26 - 136 PD - FW

1. The document provides welding procedure specification details for welding grade AH 36 steel plates 10mm thick using the GMAW process with a VENVU 116 filler metal and CO2 shielding gas at 15 l/min. 2. The welding will be completed in a single pass on each side of the joint in the overhead position. 3. No preheat or post weld heat treatment is required and the welding parameters are 220 amps, 26.5 volts at a travel speed of 35 cm/min.

Uploaded by

Vasiljka Đordan Jelaca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views1 page

PWPS Vahali 26 - 136 PD - FW

1. The document provides welding procedure specification details for welding grade AH 36 steel plates 10mm thick using the GMAW process with a VENVU 116 filler metal and CO2 shielding gas at 15 l/min. 2. The welding will be completed in a single pass on each side of the joint in the overhead position. 3. No preheat or post weld heat treatment is required and the welding parameters are 220 amps, 26.5 volts at a travel speed of 35 cm/min.

Uploaded by

Vasiljka Đordan Jelaca
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Company name: Vahali Production Services d.o.o.

Iniated by: Marko WELDING POSITION PREHEAT


Đurđević
WPS no.: VAHALI 26 Rev. Date: 09.10.2019. Weld position Owerhead Temperature (min.) -
Weld progression - Max. interpass temp. -
VSM project no. Qualification test Client + order no. Position of fillet weld PD/4F Preheat maintenance -
Welding Process 136 GMAW FCAW
Project name variouse Remarks Robot: Servisoud Remarks -
Process type Automatic Welding code Model: Magliht
JOINT DETAILS POSTWELD HEATTREATMENT SHIELDING GAS
Minimum Maximum
(mm) (mm) Temperature - Producer Messer Tehnogas
Thickness 1 10 10 Holding time - Trade name CO₂
Thickness 2 10 10 Heating rate - Flow rate 15 l/min
Diameter 1 Plate Plate Cooling rate - Gas backing -
Diameter 2 Plate Plate Remarks - Trailing gas -
Joint type T Remarks -
Root opening no
Joint angle 1 -
Joint angle 2 -
Backing no Tungsten electrode size -
Backing mat. - Model of transfer for GMAW -
Electrode wire feed speed range -
Base material Multiple or single pass (per side) Single
Material designation Multiple or single electrodes -
Chemical properties Mechanical Properties
or steel type Travel speed See below
Base C max 0.18%; Mn min 0,90%; Si max 0.5%; Peening -
ReH min 355; Rm 490/630; El.A5 min 16% Temp.
Grade AH 36 P max 0.035%;S max 0.035%;Cu max 0.35%;
-20̊ C; KVL 34; KVT 24
Material 1 Cr max 0.20%; Ni max 0.40%; Mo max 0.08% Remarks -
C max 0.18%; Mn min 0,90%; Si max 0.5%;
Base ReH min 355; Rm 490/630; El.A5 min 16% Temp.
Grade AH 36 P max 0.035%;S max 0.035%;Cu max 0.35%;
-20̊ C; KVL 34; KVT 25
Material 2 Cr max 0.20%; Ni max 0.40%; Mo max 0.08%
FILLER METALS ELECTRICAL CHARACTERISTICS
Filler trade name VENVU 116 - - Weld Class or Current and Amperage Voltage Travel speed Heat input
Consumable brand VENVULAS - - process trade name polarity +/- 10 % +/- 10 % (cm/min) (kJ/mm)
Spec. No. - - - Rootlayer GMAW EN ISO 17632-A DC+ 220 26.5 35 -
Standard EN ISO 17632-A - - Hotpass - - - - - - -
Consumable diameter 1,2 mm - - Filling - - - - - - -
Electrode -flux - - - Filling - - - - - - -
Flux trade name - - - Cap - - - - - - -
Consumable insert - - - Remarks -
Remarks - - -

You might also like