Set1 m-2

1) The first micro-processor had a (n) ______.

a) 1-bit data bus b) 2- bit data bus c) 3-bit data bus d) 4-bit data bus

2) __________ processor is first introduced by the Intel in 1971.

a) 8080 b) 4004 c) 8008 d) 8085

3) Which of the following is/are 8-bit micro processor?

a) 8008 b) 8080 c) 8085 d) All of the mentioned

4) The limitations of the 8-bit microprocessors was/were is ________.

a) Low speed of execution b) Low memory addressing capability
c) Less powerful instruction set d) All of the mentioned

5) The number of address and data lines of 8085 are____.

a) 8 and 8 b) 16 and 8 c) 8 and 16 d) 16 and 16

6) Intel’s 8086 were launched in the year_____.

a) 1971 b) 1972 c) 1974 d) 1978

7 )Which is the microprocessor comprises?
a) Register section b) One or more ALU c) Control unit d) All of the mentioned

8) A 16-bits address bus can generate _____addresses.

a) 32767 b) 25652 c) 65536 d) None of the mentioned

9)The register of 8086 are_____ bits in size.

a) 8 b) 12 c) 16 d) 20

10) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H

11) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH

12) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment

13) Direction flag is used with ____.

a) String instructions b) Stack Instructions c) Arithmetic Instructions d) Branch Instructions

14) In 8086 the overflow flag is set when______.

 a) The sum is more than 16 bit b) Carry and sign flags are set
c) Signed numbers go out of their range after an arithmetic operation d) During subtraction

15) The index register is used to hold __________.

a) Segment memory b) Offset memory c) Offset address d) Segment address

16 Instruction Pointer (IP) contains offset address of ________ segment.

a) Data segment b) Code segment c) Stack segment d) Extra segment

17) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment

18) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack

19) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555

20) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero

Answers:

1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
D B D D B D D C C C
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
B B A A C B B A B B

Set2
1) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H

2) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH
 3) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment

4) Direction flag is used with ____.

a) String instructions b) Stack Instructions c) Arithmetic Instructions d) Branch Instructions

5) In 8086 the overflow flag is set when______.

a) The sum is more than 16 bit b) Carry and sign flags are set
c) Signed numbers go out of their range after an arithmetic operation d) During subtraction

6) The index register is used to hold __________.

a) Segment memory b) Offset memory c) Offset address d) Segment address

7) Instruction Pointer (IP) contains offset address of ________ segment.

a) Data segment b) Code segment c) Stack segment d) Extra segment

8) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment

9) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack

10) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555

11) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero

12) The first micro-processor had a (n) ______.

a) 1-bit data bus b) 2- bit data bus c) 3-bit data bus d) 4-bit data bus

13) __________ processor is first introduced by the Intel in 1971.

a) 8080 b) 4004 c) 8008 d) 8085

14) Which of the following is/are 8-bit micro processor?

a) 8008 b) 8080 c) 8085 d) All of the mentioned

15) The limitations of the 8-bit microprocessors was/were is ________.

a) Low speed of execution b) Low memory addressing capability
c) Less powerful instruction set d) All of the mentioned

16) The number of address and data lines of 8085 are____.

a) 8 and 8 b) 16 and 8 c) 8 and 16 d) 16 and 16

17) Intel’s 8086 were launched in the year_____.

a) 1971 b) 1972 c) 1974 d) 1978
18)Which is the microprocessor comprises?
 a) Register section b) One or more ALU c) Control unit d) All of the mentioned

19) A 16-bits address bus can generate _____addresses.

a) 32767 b) 25652 c) 65536 d) None of the mentioned

20)The register of 8086 are_____ bits in size.

a) 8 b) 12 c) 16 d) 20

Answers:

1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
C B B A A C B B A B
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
B D B D D B D D C C

Set3

1) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH

2) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment

3) Direction flag is used with ____.

a) String instructions b) Stack Instructions c) Arithmetic Instructions d) Branch Instructions

4) In 8086 the overflow flag is set when______.

a) The sum is more than 16 bit b) Carry and sign flags are set
c) Signed numbers go out of their range after an arithmetic operation d) During subtraction

5) The index register is used to hold __________.

a) Segment memory b) Offset memory c) Offset address d) Segment address

6)Instruction Pointer (IP) contains offset address of ________ segment.

a) Data segment b) Code segment c) Stack segment d) Extra segment
 7) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment

8) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack

9) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555

10) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero

11) The first micro-processor had a (n) ______.

a) 1-bit data bus b) 2- bit data bus c) 3-bit data bus d) 4-bit data bus

12) __________ processor is first introduced by the Intel in 1971.

a) 8080 b) 4004 c) 8008 d) 8085

13) Which of the following is/are 8-bit micro processor?

a) 8008 b) 8080 c) 8085 d) All of the mentioned

14) The limitations of the 8-bit microprocessors was/were is ________.

a) Low speed of execution b) Low memory addressing capability
c) Less powerful instruction set d) All of the mentioned

15) The number of address and data lines of 8085 are____.

a) 8 and 8 b) 16 and 8 c) 8 and 16 d) 16 and 16

16) Intel’s 8086 were launched in the year_____.

a) 1971 b) 1972 c) 1974 d) 1978
17 )Which is the microprocessor comprises?
a) Register section b) One or more ALU c) Control unit d) All of the mentioned

18) A 16-bits address bus can generate _____addresses.

a) 32767 b) 25652 c) 65536 d) None of the mentioned

19)The register of 8086 are_____ bits in size.

a) 8 b) 12 c) 16 d) 20

20) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H

Answers:

1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
B B A A C B B A B B
 11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
D B D D B D D C C C

Set4

1) The first micro-processor had a (n) ______.

a) 1-bit data bus b) 2- bit data bus c) 3-bit data bus d) 4-bit data bus

2) __________ processor is first introduced by the Intel in 1971.

a) 8080 b) 4004 c) 8008 d) 8085

3) Which of the following is/are 8-bit micro processor?

a) 8008 b) 8080 c) 8085 d) All of the mentioned

4) The limitations of the 8-bit microprocessors was/were is ________.

a) Low speed of execution b) Low memory addressing capability
c) Less powerful instruction set d) All of the mentioned

5) The number of address and data lines of 8085 are____.

a) 8 and 8 b) 16 and 8 c) 8 and 16 d) 16 and 16

6) If the size of the segment is 64 kb, what will be the starting and ending off set addresses of it
a) 0000H to 7FFFH b) 0000H to FFFFH c) 8000H to FFFFH d) 00000H to FFFFFH

7) The 8086 fetch instruction one after another from ______ of memory.
a) Data segment b) Code segment c) Extra segment d) Stack segment

8) Direction flag is used with ____.

a) String instructions b) Stack Instructions c) Arithmetic Instructions d) Branch Instructions

9) In 8086 the overflow flag is set when______.

a) The sum is more than 16 bit b) Carry and sign flags are set
c) Signed numbers go out of their range after an arithmetic operation d) During subtraction
 10) The index register is used to hold __________.
a) Segment memory b) Offset memory c) Offset address d) Segment address

11) Intel’s 8086 were launched in the year_____.

a) 1971 b) 1972 c) 1974 d) 1978

12 )Which is the microprocessor comprises?
a) Register section b) One or more ALU c) Control unit d) All of the mentioned

13) A 16-bits address bus can generate _____addresses.

a) 32767 b) 25652 c) 65536 d) None of the mentioned

14)The register of 8086 are_____ bits in size.

a) 8 b) 12 c) 16 d) 20

15) Of the segment addresses are assigned as 0000H to F000H and the offset addresses values are from 0000H to FFFFH,
then the physical addresses range from_____.
a) 0000H to FFFFH b) 00000H to F0000H c) 00000H to FFFFF d) 0000H to FFF0H

16) Instruction Pointer (IP) contains offset address of ________ segment.

a) Data segment b) Code segment c) Stack segment d) Extra segment

17) _______ is the most important segment and it contains the actual assembly language instructions to be executed by the
microprocessor.
a) Data segment b) Code segment c) Stack segment d) Extra segment

18) The BIU prefetches the instruction from memory and store them in _____.
a) Queue b) Register c) Memory d) Stack

19) If segment address = 1005 H, offset address = 5555 H, then the physical address is_____.
a) 655A H b) 155A5 H c) 4550 H d) 56555

20) If_________ flag is set; the processor enters the single step execution mode.
a) Direction b) Trap c) Interrupt d) Zero

Answers:

1) 2) 3) 4) 5) 6) 7) 8) 9) 10)
D B D D B B B A A C
11) 12) 13) 14) 15) 16) 17) 18) 19) 20)
D D C C C B B A B B