Instruction For Updating
Instruction For Updating
Before starting the update, please note the following hints: Be sure to back up any data you want to keep
before you upgrade your device! The update resets the device to factory settings and
ALL THE DATA ENTERED WILL BE DELETED!
You need an USB stick with as many as 8 GB capacity and that it is FAT32 formatted. The stick has to be
formatted as FAT32. (This is standard, so if you haven´t it reformatted its probably FAT32 already.)
1. Make sure that the device is fully charged and turned off.
2. Connect the prepared USB stick with the device via the provided USB host adapter.
3. Press and hold the "Power" and "Volume +" button at the same time until the device is starting
and the white TrekStor logo will appear.
4. A screen with 6 icons should appear, press "Volume –" or "Volume +" and select the icon "Boot
Manager". Confirm it with the "Power" button.
6. After successfully finished the update, the device is in the 'Audit mode'.
7. Change to the desktop mode by swipe your finger from the right side of the black border of tablet
into the middle/center. In the menu tip on the 1st icon "Tablet mode" to switch to the desktop
mode.
8. Double-click the icon "Cleanup TestTool" on the desktop. A new DOS window will open and clean
the files. Attention: The device will automatically restart.
9. Wait and after approx. 30 seconds the language selection with 4 languages (Deutsch, English,
italiano, svenska) will appear.
11. Finish