Scribd
Upload
76 views2 pages

How To Create A Bootable USB Flash Drive

To create a bootable USB flash drive, insert a USB drive into a running computer, open the Command Prompt as an administrator, use diskpart commands to clean and format the drive, create and select a new primary partition, format it using NTFS, set it as active, and save a custom image file to the root of the USB drive. Popular third-party software like Rufus, Windows USB/DVD Download Tool, and Universal USB Installer can also be used on Windows.

Uploaded by

Durga Shankar Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
76 views2 pages

How To Create A Bootable USB Flash Drive

To create a bootable USB flash drive, insert a USB drive into a running computer, open the Command Prompt as an administrator, use diskpart commands to clean and format the drive, create and select a new primary partition, format it using NTFS, set it as active, and save a custom image file to the root of the USB drive. Popular third-party software like Rufus, Windows USB/DVD Download Tool, and Universal USB Installer can also be used on Windows.

Uploaded by

Durga Shankar Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

How to create a bootable USB flash drive

1. Insert a USB flash drive into a running computer.


2. Open a Command Prompt window as an administrator.
3. Type diskpart
4. In the new command line window that opens, to determine the USB flash drive
number or drive letter, at the command prompt, type list disk, and then click
ENTER. The list disk command displays all the disks on the computer. Note the
drive number or drive letter of the USB flash drive.
5. At the command prompt, type select disk <X>, where X is the drive
number or drive letter of the USB flash drive, and then click ENTER.
6. Type clean and the click ENTER. This command deletes all data from the USB
flash drive.
7. To create a new primary partition on the USB flash drive, type
create partition primary and then click ENTER.
8. To select the partition that you just created, type select partition 1 and
then click ENTER.
9. To format the partition, type format fs=ntfs quick and then click ENTER.
10. Type active and then click ENTER.
11. Type exit and then click ENTER.
12. When you finish preparing your custom image, save it to the root of the USB flash
drive.
Software’s That can be Used are  

 Rufus (Windows)
 Windows USB/DVD Download Tool
 Universal USB Installer (Windows)

You might also like