5.
Implement and study the performance of GSM on NS2/NS3 (Using MAC
layer) or equivalent environment.
# General Parameters
set stop 100; # Stop time.
# Topology
set type gsm; #type of link:
# AQM parameters
set minth 30
set maxth 0
set adaptive 1; # 1 for Adaptive RED, 0 for plain RED
# Traffic generation.
set flows 0; # number of long-lived TCP flows
set window 30; # window for long-lived traffic
# Plotting statistics.
set opt(wrap) 100; # wrap plots?
set opt(srcTrace) is; # where to plot traffic
set opt(dstTrace) bs2; # where to plot traffic
#default downlink bandwidth in bps
set bwDL(gsm) 9600
#default downlink propagation delay in seconds
set propDL(gsm) .500
KRISHNA GUDI, CSE DEPT, KSIT 1
set ns [new Simulator]
set tf [open out.tr w]
$ns trace-all $tf
set nodes(is) [$ns node]
set nodes(ms) [$ns node]
set nodes(bs1) [$ns node]
set nodes(bs2) [$ns node]
set nodes(lp) [$ns node]
proc cell_topo {} {
global ns nodes
$ns duplex-link $nodes(lp) $nodes(bs1) 3Mbps 10ms DropTail
$ns duplex-link $nodes(bs1) $nodes(ms) 1 1 RED
$ns duplex-link $nodes(ms) $nodes(bs2) 1 1 RED
$ns duplex-link $nodes(bs2) $nodes(is) 3Mbps 50ms DropTail
puts "GSM Cell Topology"
}
proc set_link_params {t} {
global ns nodes bwDL propDL
$ns bandwidth $nodes(bs1) $nodes(ms) $bwDL($t) duplex
$ns bandwidth $nodes(bs2) $nodes(ms) $bwDL($t) duplex
$ns delay $nodes(bs1) $nodes(ms) $propDL($t) duplex
$ns delay $nodes(bs2) $nodes(ms) $propDL($t) duplex
$ns queue-limit $nodes(bs1) $nodes(ms) 10
$ns queue-limit $nodes(bs2) $nodes(ms) 10
}
KRISHNA GUDI, CSE DEPT, KSIT 2
# RED and TCP parameters
Queue/RED set adaptive_ $adaptive
Queue/RED set thresh_ $minth
Queue/RED set maxthresh_ $maxth
Agent/TCP set window_ $window
source web.tcl
#Create topology
switch $type {
gsm -
cdma {cell_topo}
}
set_link_params $type
$ns insert-delayer $nodes(ms) $nodes(bs1) [new Delayer]
$ns insert-delayer $nodes(ms) $nodes(bs2) [new Delayer]
# Set up forward TCP connection
if {$flows == 0} {
set tcp1 [$ns create-connection TCP/Sack1 $nodes(is) TCPSink/Sack1
$nodes(lp) 0]
set ftp1 [[set tcp1] attach-app FTP]
$ns at 0.8 "[set ftp1] start"
}
proc stop {} {
global nodes opt tf
set wrap $opt(wrap)
set sid [$nodes($opt(srcTrace)) id]
set did [$nodes($opt(dstTrace)) id]
KRISHNA GUDI, CSE DEPT, KSIT 3
set a "out.tr"
set GETRC "../../../bin/getrc"
set RAW2XG "../../../bin/raw2xg"
exec $GETRC -s $sid -d $did -f 0 out.tr | \
$RAW2XG -s 0.01 -m $wrap -r > plot.xgr
exec $GETRC -s $did -d $sid -f 0 out.tr | \
$RAW2XG -a -s 0.01 -m $wrap >> plot.xgr
exec xgraph -x time -y packets plot.xgr &
exit 0
}
$ns at $stop "stop"
$ns run
KRISHNA GUDI, CSE DEPT, KSIT 4
Output:
KRISHNA GUDI, CSE DEPT, KSIT 5
GSM Trace File:
KRISHNA GUDI, CSE DEPT, KSIT 6
