0% found this document useful (0 votes)
37 views

Temflex 1500: Data Sheet

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
37 views

Temflex 1500: Data Sheet

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data Sheet

Temflex 1500
Vinyl Electrical Tape
Product Description Typical Data/Physical Installation
Temflex 1500 Electrical Tape Properties Techniques
is a good quality and Dielectric Strength* The tape shall be applied in
economical general purpose Standard Condition >1000 half–lapped layers with
vinyl insulating tape. It has V/Mil sufficient tension to conform
excellent resistance to: After Humidity and produce a uniform
abrasion, moisture, alkalies, Condition >90% of covering. In most applications,
acid, and varying weather Standard this tension will reduce the
conditions (including sunlight). tape’s width to approximately
It is a polyvinyl chloride (PVC) Insulation Resistance* 5/8 of its original width. On
tape that has a high wet >106 Megohms pigtail splices, the tape should
dielectric strength, is be wrapped beyond the end of
conformable, and provides Thickness* 5 mils the wires and then folded back,
excellent mechanical protection leaving a protective cushion to
with minimum bulk. Elongation* 150% resist cut–through. Apply the
Applications tape with no tension on the
Breaking Strength* 14 lbs/in last wrap to prevent flagging.

Primary electrical insulation for Adhesion* Maintenance


all wire and cable splices rated To Steel 18 oz/in Temflex 1500 Electrical Tape
up to 600 volts. To backing 18 oz/in is stable under normal storage
conditions.
Protective jacketing for high *ASTM D–1000
voltage cable splices and Availability
repairs. Note: These are typical
properties and should not be Temflex 1500 Electrical Tape
used for specification purposes. is available from 3M and your
Harnessing of wires and cables. local 3M authorized electrical
distributor.
For indoor or outdoor
applications.

For above or below grade


applications.
Important Notice
All statements, technical information Any statements or recommendations SELLER SHALL NOT BE LIABLE TO
and recommendations related to the of the Seller which are not contained THE USER OR ANY OTHER
Seller’s products are based on in the Seller’s current publications PERSON UNDER ANY LEGAL
information believed to be reliable, shall have no force or effect unless THEORY, INCLUDING BUT NOT
but the accuracy or completeness contained in an agreement signed by LIMITED TO NEGLIGENCE OR
thereof is not guaranteed. Before an authorized officer of the Seller. STRICT LIABILITY, FOR ANY
utilizing the product, the user should The statements contained herein are INJURY OR FOR ANY DIRECT OR
determine the suitability of the made in lieu of all warranties, express CONSEQUENTIAL DAMAGES
product for its intended use. The user or implied, including but not limited to SUSTAINED OR INCURRED BY
assumes all risks and liability the implied warranties of REASON OF THE USE OF ANY OF
whatsoever in connection with such merchantability and fitness for a THE SELLER’S PRODUCTS THAT
use. particular purpose which warranties WERE DEFECTIVE.
are hereby expressly disclaimed.

(c)1991 3M

3M Electrical Products Division


PO Box 2963
Austin, TX 78769–2963

You might also like