Scribd
Upload
497 views1 page

Centrifugal Pump Calculator

This document provides information for calculating the requirements for a centrifugal pump scheme. It includes details of the plant, fluid properties, suction and discharge parameters, pump sizing calculations, and remarks. The pump is required to move 20 cubic meters per hour of water at 40°C from a drum at 1 bar to a terminal pressure of 6.7 bar against a total head of 67 meters. The calculated hydraulic power requirement is 3.7 kW.

Uploaded by

anto3harrish3fdo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
497 views1 page

Centrifugal Pump Calculator

This document provides information for calculating the requirements for a centrifugal pump scheme. It includes details of the plant, fluid properties, suction and discharge parameters, pump sizing calculations, and remarks. The pump is required to move 20 cubic meters per hour of water at 40°C from a drum at 1 bar to a terminal pressure of 6.7 bar against a total head of 67 meters. The calculated hydraulic power requirement is 3.7 kW.

Uploaded by

anto3harrish3fdo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Centrifugal Pump Calculator.

xls
PUMP Centrifugal
Plant ABC Description XYZ
Nos reqd 2
SCHEME Project -1
Terminal Pressure
Eq Length 50 m 6.7 BarA P2
Size ID 2 in

Drum Pressure
1.0 BarA P1 9.7 m 10.00 m Elevation

24.7 m

25.0 m Length 15 m
Size ID 4 in 0.30 m

OTHER LOSSES
SUCTION DISCHARGE
FE / Orifice 0.0 Other1 0.0 FE/Orifice 0.5 Filter 0.1
Strainer 0.1 Other2 0.0 Rotametr 0.5 Margin 0.5
Nozzle 0.0 Total 0.1 Bar Nozzle 0.0 Total 1.6 Bar
FLUID FLOW AND PROPERTY

Fluid Water
Flow M3/hr 20
Temp °C 40
Density kg/m3 1000
Viscosity cP 0.8
Vap Press Bara 0.10

SUCTION SIDE

Suc vessel press BarA 1.0 Velocity in suction line


Min liq level above Pump center line mt 24.7 0.7 m/s
Line length mt 15
Suc line (ID) in 4
Line loss Bar 0.007
Other loss (Inst, str, equip etc) 0.1
Min suc press BarA 3.31
NPSH A mt 32.8
85%NPSH / NPSHA -1 mt mt 27.9 31.8
NPSH A for datasheet mt 27.9

DISCHARGE SIDE
Terminal pressure Bara 6.7 Velocity in Discharge line
Max static ht above pump center line mt 9.7 2.8 m/s
Line length mt 50.0
Dis line (ID) in 2
Line loss (x chk with simulator) Bar 0.63
Other loss (Inst, Nozz, CV,equip etc) Bar 1.6
Dis Press reqd Bara 9.9

PUMP CALCULATION
Calculated difference pressure Bar 6.6
Calculated difference head m 67
Calcuated hydraulic power (100% eff) kW 3.7

REMARKS

Rev Date Prepared Checked Approved


2
1
0

You might also like