s 4 520

ACVATIXTM

Electromotoric actuators SQL321B..

SQL361B..

For VKF42.. butterfly valves

• SQL321B.. Operating voltage AC 220 V, 2-position (SPDT) control signal

• SQL361B.. Operating voltage AC 220 V, DC 0…10 V control signal
• Optional 1000 Ω potentiometer and auxiliary switch
• Nominal angle of rotation 90°
• Handwheel and position indicator
• Built-in heating element to avoid condensation
• Compatible with EN ISO 5211 flanges

Use

For operation of VKF42.. butterfly valves as shutoff and control valves in heating,
ventilation and air conditioning plants.

CB1N4520en
11.02.2011 Building Technologies
Type summary

Product No. Stock No. Operating Positioning Position Feed- Positioning Time Nominal Flange
Voltage Signal back Signal for 90° at 50 Hz Torque Connection
[s] [Nm] EN ISO 5211
SQL321B25 S55164-A100 AC 220 V 2-position (SPDT) - 11 25 F07
SQL321B50 S55164-A101 AC 220 V 2-position (SPDT) - 19 50 F07
SQL361B50 S55164-A102 AC 220 V DC 0…10 V DC 0…10 V 19 50 F07
SQL321B150 S55164-A103 AC 220 V 2-position (SPDT) - 39 150 F07
SQL361B150 S55164-A104 AC 220 V DC 0…10 V DC 0…10 V 39 150 F07
SQL321B270 S55164-A105 AC 220 V 2-position (SPDT) - 39 270 F10
SQL361B270 S55164-A106 AC 220 V DC 0…10 V DC 0…10 V 39 270 F10
SQL321B570 S55164-A107 AC 220 V 2-position (SPDT) - 47 570 F12
SQL361B570 S55164-A108 AC 220 V DC 0…10 V DC 0…10 V 47 570 F12
SQL321B1400 S55164-A109 AC 220 V 2-position (SPDT) - 76 1400 F14
SQL361B1400 S55164-A110 AC 220 V DC 0…10 V DC 0…10 V 76 1400 F14
SQL321B2650 S55164-A111 AC 220 V 2-position (SPDT) - 105 2650 F16
SQL361B2650 S55164-A112 AC 220 V DC 0…10 V DC 0…10 V 105 2650 F16

Ordering

The actuator, butterfly valve and any accessories must be ordered separately.
When ordering, please specify the quantity, product name and product number.
Example Product No. Stock No. Description Quantity
SQL361B150 S55164-A104 Electromotoric actuator 1
ASC10.21 S55845-Z122 Double auxiliary switch 1
Delivery The actuator, accessory and butterfly valve are packed separately and delivered as
individual items.
Rev. No. Please see chapter “Rev. No” on page 12.

2 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Equipment combinations

1)
Electromotoric Actuators
SQL321B25 SQL321B50 SQL321B150 SQL321B270 SQL321B570 SQL321B1400 SQL321B2650
SQL361B50 SQL361B50 SQL361B150 SQL361B270 SQL361B570 SQL361B1400 SQL361B2650
Butterfly Valve Δps [kPa]
VKF42.50 700
VKF42.65 700
VKF42.80 700
VKF42.100 700
VKF42.125 700
VKF42.150 700
VKF42.200 700
VKF42.250 700
VKF42.300 700
VKF42.350 700
VKF42.400 700
VKF42.450 700
VKF42.500 700
VKF42.600 700
1)
SQL321B.., SQL361B.. electromotoric actuators can be mounted directly on VKF42.. butterfly
valves.
Δps Maximum permissible differential pressure at which the motorized butterfly valve will close securely
against the pressure (close off pressure)

Mechanical design

The actuator is driven by a 2-position (SPDT) or DC 0…10 V control signal from

the controller and generates a rotary motion which is transferred to the butterfly
valve via a driver.
These electromotoric actuators require no maintenance. They have a reversible
asynchronous motor which drives the main shaft via gear train, which
accommodates the diagonal square head of the butterfly valve. For SQL321B25,
the coil spring is fitted with handwheel shaft, handwheel is engaged when pushed
in. For others, the worm shaft is fitted with a direct-acting handwheel.

The actuators are 90° rotated so as to work with Siemens VKF42.. butterfly valves.
During automatic operation, rotation is stopped by two built-in end-switches.
To prevent the temperature inside the housing from falling below the dew point
temperature, the actuators are equipped with a built-in heating element.

1 Position indication 4 Handwheel

2 Terminal compartment 5 EN ISO 5211 flange connection
3 Cover (motor inside)

3 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Calibration In order to determine the disc position fully closed “0%” or fully open “100%”, cali-
SQL361B.. bration is recommended on initial commissioning of modulating type actuator.
Prerequisites
• Actuator is mounted on butterfly valve
• Rotate the actuator to the half-open position using the handwheel
• Housing cover is removed
Step To do LED on PCB Actuator action
• Supply power to actuator
terminal 1 and 2 Actuator moves to “0%”
1. Power supply Lit
• No control signal connec- (closed) disc position
ted
• Press button S2 for 5 Actuator remains at “0%”
2. Start calibration Dark
seconds (closed) disc position
• Press button S6
• 0% (closed) value is sto- When S6 is released
3. 0% (close) position red  Lit→Dark actuator moves to 100%
• Wait, actuator moves to (open) disc position
open disc position
• Press button S7
• 100% (open) value is When S7 is released
4. 100% (open) posi-
stored Lit actuator moves to “0%”
tion
• Wait, actuator moves to (closed) disc position
close disc position
5. Calibration • Press button S6
Actuator remains at “0%”
completed • Calibration is now Flash
(closed) disc position
completed

Normal operation Actuator follows control signal Y, the LED on PCB lights.

4 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Accessories

Product
Stock No. Figure Description For Actuators
No.
ASC10.20 S55845-Z121 Double auxiliary SQL321B25
switch

ASC10.21 S55845-Z122 Double auxiliary SQL321B50

switch SQL361B50
SQL321B150
SQL361B150
SQL321B270
SQL361B270
SQL321B570
SQL361B570
SQL321B1400
SQL361B1400
SQL321B2650
SQL361B2650
ASZ10.20 S55845-Z123 Potentiometer SQL321B25
1000 Ω

ASZ10.21 S55845-Z124 Potentiometer SQL321B50

1000 Ω SQL321B150

ASZ10.22 S55845-Z125 Potentiometer SQL321B270

1000 Ω SQL321B570

ASZ10.23 S55845-Z126 Potentiometer SQL321B1400

1000 Ω SQL321B2650

Engineering notes

Electrical installation The actuators must be electrically connected in accordance with local regulations
and with the connection diagrams.
Regulations and requirements to ensure the safety of people and property
Warning must be always observed.

5 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Mounting notes

Mounting instructions Product No. Documentation No.

VKF42.. 74 319 0808 0 (M4119)
SQL321B.. / SQL361B.. 74 319 0809 0 (M4520)
ASC10.. 74 319 0810 0 (M4520.1)
ASZ10.. 74 319 0811 0 (M4520.2)

SQL321B.., These actuators can be mounted directly on type VKF42.. butterfly valves.
SQL361B.. The butterfly valves have to be closed “0%” when the actuators are mounted onto
the valves.

Orientation The valve and actuator can be assembled on site. There is no need for special
tools.
Upright to horizontal

Commissioning notes

When commissioning the motorized butterfly valves, always check wiring and test
the functions. This also applies to any additional components fitted, e.g. auxiliary
switch.
To avoid pressure shocks on the butterfly valve, the VKF42.. must be driven
Warning to its fully open position either manually or via positioning signal prior to
activating the pump(s).
The flow rate can be adjusted either by operating the electric actuators when
necessary, or by operating the handwheel.

Operating notes

Manual operation SQL321B25 Handwheel is engaged by pushing the handwheel in.

mode
SQL321B50…B2650
The handwheel is always engaged.
SQL361B50…B2650

Reversing the If the direction of rotation needs to be reversed, simply exchange the connections
direction of rotation Y12 and Y14.

Setting the angle of The 0...90° angle of rotation for the mechanical limit switches is factory-set and
rotation cannot be changed.

The potential-free auxiliary switches are equipped with adjustable switching points.

6 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Maintenance notes

The actuators and butterfly valves require no maintenance.

Before performing any service work on the valve or actuator:
Warning • Switch off the pump and power supply
• Close the main shut-off valves in the pipe work
• Release pressure in the pipes and allow them to cool down completely
If necessary, disconnect electrical connections from terminals.
The valve must be re-commissioned only with the handwheel or the actuator cor-
rectly assembled.

Disposal The products contain electrical and electronic components and must not be dis-
posed of together with domestic waste. This applies in particular to the printed cir-
cuit board.
Legislation may demand special handling of certain components, or it may be sen-
sible from an ecological point of view.
Observe all local and currently valid legislation.

Warranty

The engineering data specified in chapter "Equipment combinations" (page 2) are

only guaranteed in connection with the Siemens butterfly valves listed.

Note When using the actuators in connection with butterfly valves of other manufacture,
correct functioning must be ensured by the user, and Siemens will assume no
responsibility.

7 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Technical data

SQL321B25 SQL321B50 SQL321B150 SQL321B270 SQL321B570 SQL321B1400 SQL321B2650

- SQL361B50 SQL361B150 SQL361B270 SQL361B570 SQL361B1400 SQL361B2650
Power supply Operating voltage AC 220 V / 1 phase
Voltage tolerance +/- 10%
Frequency 50 / 60 Hz
Power consumption 1) 42 VA 88 VA 91 VA 165 VA 194 VA 361 VA 436 VA
Signal inputs Positioning signal SQL321.. 2-position (SPDT)
SQL361.. DC 0…10 V
Parallel operation For SQL321B.., it is not possible for electrical parallel operation of several actuators.
For SQL361B.., electrical parallel operation of several actuators is possible, and the specific quan-
tity of actuator depends on the controller output.
Position feedback SQL361.. DC 0…10 V
Operating Positioning time for 90° at
11 s 19 s 39 s 39 s 47 s 76 s 105 s
data 50 Hz
Angle of rotation 90° ± 1° (factory setting)
Nominal Torque 1) 25 Nm 50 Nm 150 Nm 270 Nm 570 Nm 1400 Nm 2650 Nm
Auxiliary Switching capacity AC 250 V,
switch 5 A resis- AC 250 V, 10 A resistive
tive
Heating element (Build in) 220 V 220 V 220 V
2.0 W 7.5 W 8.5 W
Max. permissible medium
-10…80 °C
temperature
Degree of Housing upright to horizontal IP65 as per EN 60529
protection Insulation class Class I as per EN 60730
Standards CE-conformity
As per EMC directive 2004/108/EC
Immunity EN 61000-6-2:[2005] Industrial
Emissions EN 61000-6-3:[2007] Residential
Electrical safety EN 60730-1:[2000] +A1:[2004] +A2:[2008] +A12:[2003] +A13:[2004] +A14:[2005] +A16:[2007]
Low-voltage directive (LVD) EN 60730-1:[2000] +A1:[2004] +A2:[2008] +A12:[2003] +A13:[2004] +A14:[2005] +A16:[2007]
AC 220 V EN 60730-2-14:[1997] +A1:[2001] +A11:[2005] +A2:[2008]
C-tick N474
Environmental compatibility ISO 9001 (quality)
Directive 2002/95/EC (RoHS)
Flange / shaft connection types EN ISO 5211
to valve (top flange) F07 F10 F12 F14 F16
Dimension Dimensions see “Dimensions”, page 11, 12
weight Weight see “Dimensions”, page 11, 12
Cable glands 2 x Pg 13.5 2 x Pg 16
Materials Housing base, yoke Die-cast aluminum alloy Housing: Die-cast
aluminum alloy
Gear box: Cast Iron
Cover Die-cast aluminum alloy
1)
These values apply at nominal voltage, ambient temperature of 20 °C and at nominal running time.

General ambient conditions Operation Transport Storage

EN 60721-3-4 EN 60721-3-2 EN 60721-3-1
Environmental conditions Class 4K1 Class 2K2 Class 1K3
Temperature -20...65 °C -30...65 °C -5...55 °C
Humidity 15...100% r. h. <95% r. h. 0...95% r. h.

8 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
 Internal diagrams

SQL321B..

L System potential AC 220 V

N System neutral
Y12 Positioning signal (Closed)
Y14 Positioning signal (Open)
c1 Auxiliary dry contact switch CLOSED (ASC10.20/ASC10.21)
c2 Auxiliary dry contact switch OPEN (ASC10.20/ASC10.21)
p1 Potentiometer (ASZ10..)

SQL361B..

L System potential AC 220 V

N System neutral
Y Positioning signal for DC 0...10 V
M Measuring neutral
c1 Auxiliary dry contact switch CLOSED (ASC10.20/ASC10.21)
c2 Auxiliary dry contact switch OPEN (ASC10.20/ASC10.21)
U Position feedback signal DC 0…10 V

9 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Connection diagrams

SQL321B..

N1 Controller
Y1 Actuator
L 1 phase AC 220 V
N Neutral
Q1, Q2 Controller contacts
Y12 Positioning signal (Closed)
Y14 Positioning signal (Open)

SQL361B..

N1 Controller
Y1 Actuator
L 1 phase AC 220 V
N Neutral
Y Positioning signal DC 0...10 V
M Measuring neutral
U Position feedback signal DC 0…10 V

10 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
Dimensions (mm)

Product No. A E F H G ØI J Weight EN ISO 5211

□ [kg]
SQL321B25 195 60 110 15 11 70 4-M8 3.6 F07

Product No. A B C D E F G H ØI J Weight EN ISO 5211

□ [kg]
SQL321B50
264 125 72 213 125 239 17* 35 70 4-M8 11 F07
SQL361B50
SQL321B150
264 125 72 213 125 239 17 35 70 4-M8 11 F07
SQL361B150
SQL321B270
336 154 98 377 148 251 22 55 102 4-M10 22 F10
SQL361B270
SQL321B570
336 154 98 377 148 251 27 55 125 4-M12 22 F12
SQL361B570

* Actuator SQL361B50 has one additional bush.

11 / 12

Siemens Electromotoric actuators CB1N4520en

Building Technologies 11.02.2011
 Product No. A B C D E F G H ØI J Weight EN ISO 5211
□ [kg]
SQL321B1400
541 218 263 295 162 344 36 85 140 4-M16 76 F14
SQL361B1400
SQL321B2650
541 218 263 295 162 344 46 85 165 4-M20 76 F16
SQL361B2650

▲
►► ≥ 200 mm: For mounting, connection, operation, service, etc.
▲

Revision numbers

Product No. Valid from Rev. No. Product No. Valid from Rev. No.
SQL321B25 ..B - -
SQL321B50 ..B SQL361B50 ..B
SQL321B150 ..B SQL361B150 ..B
SQL321B270 ..B SQL361B270 ..B
SQL321B570 ..B SQL361B570 ..B
SQL321B1400 ..B SQL361B1400 ..B
SQL321B2650 ..B SQL361B2650 ..B

12 / 12  2011 Siemens Switzerland Ltd. Subject to change

Siemens Electromotoric actuators CB1N4520en
Building Technologies 11.02.2011